DM 3.0.0.665: Individual dataflow diagrams forget process size and position

Some of my dataflow diagrams do not remember the size and position of processes when I move or resize them.
The problem only seems to affect "external" processes, ie processes that are not subprocesses to the diagram.
How can I avoid this behavior?
/ Marc de Oliveira

Marc,
I logged bug for that. Unfortunately there is no workaround.
Philip

Similar Messages

How do I automatically make new front panels and block diagrams a certain size and screen position, like able to fit on a 1024 x 768 screen?

I'm studying for the CLD and I notice that one of the requirements is this:
Develop block diagrams to fit a screen resolution of 1024 x 768.
When I create a new VI, its resolution is slightly too big: 1110 x 768.
When I create a subVI via the menu item Edit >> Create SubVI, it is way too small: 800 x 543.
For both methods of creating new VIs, I would like to specify both the screen position and window size. But if that is not possible in LabVIEW, I'd like a quick way to make this happen. I see some property nodes for VIs where I could write a subVI that could do this for the front panel, but that is awkward. And it does not apply to block diagrams.
Is there a clever way to do these things?

bmihura wrote:
I'm studying for the CLD and I notice that one of the requirements is this:
Develop block diagrams to fit a screen resolution of 1024 x 768.
When I create a new VI, its resolution is slightly too big: 1110 x 768.
When I create a subVI via the menu item Edit >> Create SubVI, it is way too small: 800 x 543.
For both methods of creating new VIs, I would like to specify both the screen position and window size. But if that is not possible in LabVIEW, I'd like a quick way to make this happen. I see some property nodes for VIs where I could write a subVI that could do this for the front panel, but that is awkward. And it does not apply to block diagrams.
Is there a clever way to do these things?
It doesn't mean the default size of the window. It means once your code is complete, your block diagram should be small enough that you can see all your code when its on a monitor of that resolution. Before you test, set your computer monitor resolution to 1024x768. Write your code. If all the code on your block diagram can be seen without scrolling, you will be fine. They won't measure this explicitly. They are basically just saying "you shouldn't have a huge block diagram."
CLA, LabVIEW Versions 2010-2013

How can I move my iPhoto Library from one Mac to another without losing the comments on the individual photos in the process?

How can I move my iPhoto Library from one Mac to another without losing the comments on the individual photos in the process? The source Macbook (OS 10.4.11 and iPhoto 6.0.6 (3.2.2.)) is with my husband in Germany, the target MacBook Pro (OS 10.8.5, iPhoto 11) is with me in Japan. Thanks for your help.

I copied the iPhoto Library to a CD and from there to the new MacBook
If you copied the library to the CD via the Finder it would be no different than the methods Terence suggested. If you used the Share ➙ Burn menu option from inside iDVD you'll get a mini library that has to be accessed from the open library and the events/alubums copied into the destination library. Not the same as the other methods.
The Share ➙ Burn method is no longer supported with iPhoto 9 and later.
OT

ITunes no longer recognizes my iPod nano 5th gen. When plugged into macbook usb it appears as my iPhone. Previously both devices had individual identities. Have reset iPod and turned macbook off/on.

iTunes no longer recognizes my iPod nano 5th gen. When plugged into macbook usb it appears as my iPhone. Previously both devices had individual identities. Have reset iPod and turned macbook off/on.

Hello BPeery,
I would go through ALL the steps here:
iPod not recognized in 'My Computer' and in iTunes for Windows
Let us know how it goes.
Hope this helps.
~Julian

Resize individual shapes to a specified size?

Hi there,
Does anyone know of a way, by script, action or other means of resizing an individual shape or path to a specified dimension in inches (or any other unit of measurement) without drawing the shape externally in Illustrator and bringing it back into PS or without opening a new doc at the desired size and copy/pasting back into your first document.
I've never really considered this as a problem to be solved until a co-worker asked me how to do it. The two solutions above were my only replies to this question. Have I missed some other solution that uses ONLY PS CS3?
Thanks,
-JM

That's true, Buko.
But what may disappoint the newcomer is finding out that the resizing will be based on the size of the rectangular bounding box that surrounds the selected shape or path.
So if you have a 100px square that's rotated, the bounding box is going to report a different, larger size. You'd have to measure, check the angle "de-rotate" to perpendicular, and then make a change.
Some things just aren't as easy as we'd like them to be, and we have to do the work.

How to create Decision Node in Data Flow diagram under Process Model

Hi,
I am starting a new project and would like to use Oracle Data Modeler for my data flow diagrams and logical/relational diagrams. Could you please guide me how can I ask Decision question in data flow diagram. Ideallly i would like to create a Decision Node (diamond) in Data Flow diagram under Process Model with yes or no option.
Thanks in advance
JM

Hi JM,
may be you are looking for other notation. There is no dedicated decision node in data flow diagramming.
Philip

If I have a single, individual membership can I put Lightroom and Photoshop on both of my computers?

If I have a single, individual membership can I put Lightroom and Photoshop on both of my computers?

Yes. You are permitted two activations.

Diagram Optimize Shape Size Height and Width

What determines the dimensions set by the Jdeveloper 11g menu option of Diagram.Optimize Shape Size.Height and Width while editing a Database Diagram ?
I was hoping that this option resizes the dimensions of a box that represents a table to fully display all the columns, types and keys within the limits set by Tools.Preferences.Diagrams.Database.Max Compartment Entriesand Max Shape Width.
I set
Tools.Preferences.Diagrams.Database.Max Compartment Entries = 100
Max Shape Width = 1000
However, what I observe when using this option in a Database Diagram is that the box height is resized to show the first 15 column names and an ellipsis and the box width is less than the width of many of the column name rows.
Does anyone else think this is a bug? If so, I will open an SR.

Update:
The limits set by Tools.Preferences.Diagrams.Database.Max Compartment Entries and Max Shape Width affect the default values for subsequently created shapes and not existing shapes.
However, a Service Request has confirmed that changing the value for Max Compartment Entries has no effect. This behavior has been filed as a bug that will hopefully be fixed in the next release of Jdeveloper 11g.

HT4236 There HAS to be a way to get photos that were synced from the computer on to the iPad OFF of the iPad in a different way than having to email each individual photo back to oneself. And you can't delete them either, using up vital storage

My Ipad2 has photos synced from my main computer on it, taking up vital storage. I cannot remove them at all, and the folks at the Genius Bar can't help either. Apparently there is no way to remove them unless they were originally taken by the Ipad2 camera. And the only way you can get copies of those photos back on to the computer or another device is to individually email EACH photograph.
There has to be a way to remove these pics to free up the storage.
I almost was unable to load the new operating system because of the amount of photos on the iPad,which ended up on the iPad as a mistake in the first place during an early syncing when it was first purchased.
This is a HUGE glitch in the system. If you know otherwise, please advise!

How to Transfer Photos from an iPad to a Computer
http://www.wikihow.com/Transfer-Photos-from-an-iPad-to-a-Computer
Importing Personal Photos and videos from your iOS device to your computer.
http://support.apple.com/kb/HT4083
The links below have instructions for deleting photos.
iOS and iPod: Syncing photos using iTunes
http://support.apple.com/kb/HT4236
iPad Tip: How to Delete Photos from Your iPad in the Photos App
http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
Another Way to Quickly Delete Photos from Your iPad (Mac Only)
http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
How to Delete Photos from iPad
http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
How to: Batch Delete Photos on the iPad
http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
(With iOS 5.1, use 2 fingers)
How to Delete Photos from iCloud’s Photo Stream
http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
 Cheers, Tom

SQL server 2014 and VS 2013 - Dataflow task, read CSV file and insert data to SQL table

Hello everyone,
I was assigned a work item wherein, I've a dataflow task on For Each Loop container at control flow of SSIS package. This For Each Loop container reads the CSV files from the specified location one by one, and populates a variable with current
file name. Note, the tables where I would like to push the data from each CSV file are also having the same names as CSV file names.
On the dataflow task, I've Flat File component as a source, this component uses the above variable to read the data of a particular file. Now, here my question comes, how can I move the data to destination, SQL table, using the same variable name?
I've tried to setup the OLE DB destination component dynamically but it executes well only for first time. It does not change the mappings as per the columns of the second CSV file. There're around 50 CSV files, each has different set off columns
in it. These files needs to be migrated to SQL tables using the optimum way.
Does anybody know which is the best way to setup the Dataflow task for this requirement?
Also, I cannot use Bulk insert task here as we would like to keep a log of corrupted rows.
Any help would be much appreciated. It's very urgent.
Thanks, <b>Ankit Shah</b> <hr> Inkey Solutions, India. <hr> Microsoft Certified Business Management Solutions Professionals <hr> http://ankit.inkeysolutions.com

The standard Data Flow Task supports only static metadata defined during design time. I would recommend you check the commercial COZYROC
Data Flow Task Plus. It is an extension of the standard Data Flow Task and it supports dynamic metadata at runtime. You can process all your input CSV files using a single Data Flow Task
Plus. No programming skills are required.
SSIS Tasks Components Scripts Services | http://www.cozyroc.com/

Flow diagram of AP,AR and OPM MOdule

Hi,
I want to learn the flow of tables of AR,AP and OPM module.
My question is that is how to learn these flow and
...is thr any documents or flow diagram ??
Please share the documents if u have..this will be very helpfull for me..!!!!
my id : [email protected]

Did you notice the forum you were posting in? It's for SQL and PL/SQL questions.
I suggest you ask in one of the forums in
https://forums.oracle.com/forums/category.jspa?categoryID=3

ER diagrams in word docs and web pages

What are the best ways of getting ER diagrams displayed in Word documents and web pages? The output facilities from Designer seem a bit limited unless I am missing something.

True, the diagrammer is a modelling tool, not a drawing tool.
To get your diagram in word however you can select & copy the entities in a windows fashion to word (Ctrl-C + Ctrl-V).
If you want the contents of the repository in html on the web you should try ODWA (Oracle Designer Web Assitant)!
null

Tracking Individual Users Scores using Captivate 4 and Connect Enterprise

Hi,
I work in an IT shop and currently I am having trouble supporting our Marketing division's Captivate needs. They wish to be able to create quizes for online viewing in an LMS and be able to track individual users scores for accountability. Right now I we are using Captivate 4 with Adobe Connect Enterprise. I have been able to use the LMS and view quizes online, but all reporting is done as aggregate and not a session by session (individual) basis. Thus, I only have access to average, max, min scores and other info about all test takers, but no information about specific test users. I have considered accomplishing this by sending data to an access database, but this would require the IT deparment to regularly assist them with creating tests. Obviously I am looking to have the Marketing department be as self-sufficient as they can be. I think the easiest way would be to have the quiz report a session ID (unique for each instance of the quiz being accessed) to Adobe Connect and having Connect associate each aswer to a specific session ID. Other than that I do not have any other ideas for proper tracking of each user's score.
Does anyone know what the easiest (least amount of involvement from the IT staff each time Marketing needs to make a test in captivate) way to accomplish this?
Thanks!

So, i sorta found a way to do this -- by adding a TOC and making the lessons self-paced, the user will always be brought back to the place where they left off when they exited the lesson.
But it seems that even though the icon in the curriculum list changes to CONTINUE when the user closes the lesson, it still unlocks the next lesson even though the staus checkmarks in the previous lesson are not complete.
Help. Are there any other such postings?

HT4993 How do I remove podcast stations, not individual podcasts, from my iphone 5 and make it sync with my pc?

How do I remove podcast stations, not individual podcasts, from my iphone 5?

Contacts and calender you can put on icloud then sync to your new phone when its setup to the icloud account. Not sure so with emails.

Ipad App Store said "20" updates. I attempted to update w/3G. Now many apps say "Waiting" and are frozen. When I go online and plug into computer it just updates and doesn't address the individual apps, which still say "Waiting" and are frozen.

iPad App Store app said "20 updates". Attempted to update w/3G. Updated some, but now many apps say "waiting" and are frozen. I attempted to update then by attaching to computer Itunes Store. All it did was very quickly go thru the 4 steps and said, "Synched, OK to uplug." I clicked my ipad and then apps. It also said Update complete (or something like that). Now several apps on iPad are frozen and say "Waiting". Help!!

Oh a few other things I forgot.
The long winded back-ups!!!! JESSSSSSH! Although I think the latest update seems to have bit into this a bit.
Also why is it that sometimes when the iPhone is syncing it will not say on the actual iPhone that it is syncing. I see it's syncing in iTunes but the iPhone doesn't have the typical do not disconnect -syncing message!!! What's odd is I can see the new apps being updated to the iPhone and as long as I don't open any apps it will finish it's sync but the minute I open any apps the iPhone will lock-up!!!

DM 3.0.0.665: Individual dataflow diagrams forget process size and position

Similar Messages

Maybe you are looking for