DME data for house bank is not maintained - Message no. F0 275

Hello!
We got an error message in transaction 'F110 - Payments':
DME data for house bank 1253 210 is not maintained
Message no. F0 275
Diagnosis
The system could not fill a payment medium correctly due to missing house bank additional information.
System Response
The payment medium was created. You can weigh up whether the payment medium program run should be repeated after eliminating the error.
Procedure
Correct the error by expanding the missing house bank DME details.
Proceed
Do anyone know of which 'Data medium exchange' field(s) for House bank information would be mandatory:
Alternative bank ID
Bank receiving DME
Customer number
Company number
Bank number
Account number
Bank control key
ISO currency code
Instruction key
Lead days
Payment method and program is:
Country BE Belgium
Pmnt method F
Description Foreign banktransfers
Payment medium program RFFOBE_E

Dear Kuki,
Please, verify in the transaction FI12 , field instruction key for the house bank.
Regards,
PaULO

Similar Messages

  • ECC6 V_TIBAN Transport for House Banks IBAN

    Hi SAPer,
    I wonder if you have experienced this.
    As I am now implementing ECC6 and  trying to transport IBAN for house bank account.
    The IBANs are stored in the application table TIBAN ane even though I
    transport House Banks, NO IBANs were transported
    As 4.7 or before, I would normally  use transaction SM30, enter the table V_TIBAN and transport, which is OK because it set as maintenance is allowed
    However, in ECC6 system, V_TIBAN does only have "Display/Maintenance only allowed with restriction" hence am not able to SM30 transport. The change in View setting appears to be out of SAP box.
    Would any of you shed some light on how I would be able to work around this?
    Thanks for your tips
    taro

    Hello,
    We have ECC 6.0 and is able to create entry in V_TIBAN successfully.
    Please go to SE11 > View V_TIBAN. Go to tab "Maintainance Status"
    In "Access" part, radio button selected should be "Read, Change, Delete, INsert"
    In "Delivery Class" it should be "A Application table (master and transaction data)"
    In "Data Browser/Table View Maint" it should be "X Display/ Maintainance Allowed"
    However if your setting is different, then you must have a support pack restricting the access to V_TIBAN in SM30. See the below OSS note 983944, which provides and alternative in such scenario:-
    [https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=983944]
    This should solve your issue.
    Regards,
    Gaurav

  • How to define GL account for  House Bank?

    Dear Friends
    I maintained house bank sbi, house bank account and GL for house bank in FBZP. Then I maintained a Check lot in FCHI. When I was running F-58 and selected Check lot no as 8 as I maintained in FCHI, I am getting the following error:
    No G/L accounts are defined for bank SBI and payment method C
    Message no. F5459
    Diagnosis
    For the specified payment method C, in combination with house bank SBI, you have not specified a G/L account to which the posting is to be made under bank selection (Goto -> Account Determination).
    System Response
    Input not accepted.
    Procedure
    Correct your entries if they are incorrect. Otherwise ensure that the missing bank selection details are added.
    How to define GL for a Bank? Wht is T code?
    Thanks
    Chandra

    Hello,
          In FBZP assign payment method C to the bank account. and check while creating the bank account are give main bank account in FI12, account id.
    Hope this is clear, in case of problem revert me back.
    Regards,
    Sankar

  • BDC for House Bank thru fi12

    Hi,
    I hav a recording for fi12. In that after giving address, im double clicking on
    'Bank Accounts' to give Account id, GL account, etc,.
    But the function code for double clicking is not triggering the next screen while running the BDC program.
    In recording it gave the function code as '=%_GC 156 22' for double clicking.....
    How can i sort this double clicking issue or is there any Bapi for this?

    hi kapilan,
    i do have problems while creating BDC for FI12 T.Code.
    After brief analysis i found that:
    1. its not standard transaction code but its part of customizing setting.
    2. at end it creates transport request.
    after consulting our function consultant. the decision was to create different recordings for House Bank Adress data and bank accounts.
    try this way.
    Regards,
    krishna chaitanya

  • What this mean? "could not rasterize because the pixel data for this layer is not"

    I've taken a color picture and made it black and white by doing the following: Layer>New Adjustment Layer>Hue/Saturation. I brought the saturation down to -100.  The pencil is selected and my foreground color is black.
    When I try to select the flowers in my picture to bring out their color (within the black and white image), I get a circle with a black line thru it and the error message "could not rasterize because the pixel data for this layer is not directly editable".  The steps I followed are working for most of my team but some of us are getting this error message.
    Any idea why and/or how to fix it?

    Ah, thank you!  I didn't have the mask selected. So once I did select it, the color came thru like magic. 

  • Number range  for object MDTB does not exist - Message no. 61501

    Hi All ,
      I have done the necessary configurations in PP say
    Order Type
    Order Type Dependent Parameters
    Scheduling parameters for planned & production order
    Confirmation parameters
    Availabilty check etc
    and iam able to create planned & production order and confirma the production order.
    I want to configure for MRP: -
    Settings done are
    Have activeted planning file entry for all plants.
    When i run MRP system throws a error <b>Number range  for object MDTB does not exist - Message no.61501 </b>
    Is there anything to do with plant parameters OPPQ and Mrp Group OPPR.
    I just tried plant parameters,standard 0001 is not available for copying.
    Suggest me how to proceed to set MRP.
    Shankar

    Hi shankar
      it is a good practice while creating the plant copying the plant from the standard plant so that all the standard table enteries will be copied  for the plant as the standard plant is not there youcan think of copying from any other plant similar to your plant which has the required entry. else
    in SE16N  check the NRIV table for the Object MDTB. if enteris found then make the table entry with the help of abaper.
    hope this helps
    regards
    SK

  • House Bank Address Not In Transport

    Hi SAP Gurus,
    We added a new house bank in FBZP and entered all the necessary info, cocode, house bank, bank country, bank key, swift code, address, etc. However, when we moved the config to QA, the bank address is missing in the config that made it to QA.  All the following tables are in our transport: T012, T012D, T012K and T012T.
    We went back to our DEV box, entered the address again and manually triggered a transport. Still the complete bank address is missing in QA. Although we can manually insert the bank address in production. My question is, is there any reason why our transport is not allowing the bank address to be included or should the address be updated using Fi02? And shouldnu2019t FI12 directly update table BNKA? We are on ECC6 platform.
    Thanks,
    Keen

    Hi keen,
    Address data in a Bank Key can be transported but there is a special way of transporting the request to make sure that Address data is transferred to the QE0/PE0 clients.
    Follow the steps below:-
    1. Double click on the created transport request in SE10.
    2. Go to the Objects tab, and enter R3TR, TABU and BNKA in the 2nd 3rd and the 4th coulumn.. Pro_, Obj_, Object Name.
    3. Now double click on BNKA Object name and enter * for table contents under table keys.
    This way the address related data can be very well transported to other clients.
    Regards,
    SAPFICO

  • DME generation for multiple banks

    Hello,
    Our client in USA has 6 banks, and we have to generate DME for all these 6 banks, and we have to go through PMW for these requirements, now in FBZP for the country there is only 1 PMW maintenance for a given payment type, even if I configure 6 payment types with different PMW for each bank, how does this get tied back to the process, because payment type is maintained in the invoice document, which will be defaulted from the payment terms and again in F110 even if I select different payment advices, i have not seen multipe DME for the invoices, please help.
    We are in ECC6.0
    Regards
    Sus

    I think system does it automaticaly based on payment method...If you have 6 different payment methods make sure right Payment method used for each payment
    Regards,
    Guest

  • For TDS Bank hallan not updated.

    Hi Expert,
    I have configured House Bank.As we know HB will create under co code
    level.But for my case while run J1INBANK (bank challan update) there is
    showing below error.But not able to understand why system is showing
    this?Please share your view regarding the issue ASAP. Screen shot provided.
    Please give proper solution for this.
    Cheers,
    Joy Lodh
    9748438226

    Hi Manu,
    please check below steps
    1) you have to assign the dunning procedure in customer master, in the correspondence tab, if you not  maintain please maintain.
    2) check dunning procedure parameters.
    check below thread.
    http://scn.sap.com/thread/990082
    Note : Do not post your queries another threads, maintain separate query.
    Regards.
      Dileep

  • Creation of Account payee keys and Table for House Bank

    Hi Gurus,
    Please tell me how to create a Account payee keys what is transaction code for this.And let me know that what is table to check the house Banks.
    Thanks

    I dont think you create payee keys mate, you get that data from your financial institute(bank) and then upload it into your sap system.
    so if I were in your position I would talk to the business user who deals with the bank & bank transfers currently in your client-organisation and ask for that info to be provided.
    from my previous payroll expreience I know the business user for payroll, usually the payroll manager, gets that info for the sap team member and then there should also be a standard upload program to upload all those payee keys into the system.
    cheers

  • GL Acount Master Data: field 'House Bank'

    Hi,
    Does anybody knows what is the field "House Bank" for in GL Account Master data (SKB1- HBKID)?
    I have configured in FBZP for each "house bank" its GL Account in table T012K-HBKID but I have never informed HBKID in GL Account Master data.
    - what is SKB1- HBKID for?
    - should I inform the house bank at GL Account Master Data level?
    Cheers!!!

    House bank need to be setup for your companies transactions. The house bank is tied to a bank key which is tied to a account id eg Payroll, AP etc then the accoun ID is tied to a G/l Account, Ap could go to 113001 and PY to 113002 etc
    So the system know which G/l to pick based on the account id. The g.l is stored in the accound ids master data.
    Plz assign points if usefull

  • Acc *** Mandatory for Material + Material 200000060 not maintained by Purch

    Dear Gurus,
    I wanted to up the quantities for the following material in stocks: 200000060
    I then went to TC- ME21N and the system came out with the following message:
    Account assignment mandatory for material 200000060 (enter acc. ***.
    Material 200000060 not maintained by Purchasing
    Can anyone explain to me where to maintain this account assignment as there appear to have at least 2 fields in the Material Master Data with a similar name.
    Also can you explain to me how to maintain this material in Purchasing please.
    Kind regards
    Chris

    Hi,
    You have not maintined purchasing view and account view 1 for this material for that particular plant for which you are making the P.O.
    In the accounting view you have to enter the valuation class and price for the material and if this filled then it will not ask for account assignment while doing me21n.
    Regards,
    Raj.

  • Cellular Data for iTunes Match but not for app updates

    In iOS7 we can now have App updates downloaded automatically. Great. But if I want to use cellular data to stream songs from my iTunes Match library in iCloud when I'm on the road, but don't want to waste cellular data on App updates how can I do this?  It appears that enabling cellular data for iTunes Match also requires using cellular data for any of the four auto download features as well in Settings>iTunes &amp; App Store. Am I seeing this correctly and is there a way to fix this?  I don't want to use cellular data for app updates, just for iTunes Match streaming.  Any help would be great.

    This looks like the same problem I've come across. From what I have been told, they are not separate, ie if you enable use cellular data to stream songs from iTunes Match you also have to download updated apps if you have it set to automatically download them.
    I think this should definitely be separated.
    The other thing you could do it go to another streaming music provider and then turn cellular downloads off. That's what I'm looking at doing.

  • Queries based on Master data for the particular periods not working

    Hi,
    My Queries are based on master data and for 2007 we did not have customer groups define hence for the historical also we would like to display the customer groups hence we are reproting based on master data. But when iam executing my reprots for each and every month for the 2007 , i can able to execute the reprot properly but same when iam giving the values in ranges with the help of input filed ( calender month -interval) its taking hours but unable to retrieve the data for the 6 months at a time even if iam restricting the values in the queries still the problem is same...
    Can anyone has an idea what would be the problem .. its only for 6 months
    Thanks

    Hi
    Master data report consumes much time. try to see the Query Statistics  and make the performance tuning.
    Recheck your data flow for routines at TRules/upRules level.
    Recheck on the Query designer for formula/ Cmod Variables.
    The report fetching time even depends on the NO.of records too.
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d06dcd70-41a8-2b10-9f8f-dc5c68769753
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6009e125-e9a3-2a10-c6a9-e1483dfa2e1b
    Hope ithelps

  • Pricing data for partner 300027 could not be found

    Hi guys,
    We have ECC6 and CRM5,both are IDES.I have fulfilled some exercises on training document,for example,I can create sales order in CRM,then this sales order can be transported into ECC.
    now I want to extend the sales area,so I made these operations:
    1. create sales area Z009/71/71 in ECC
    2. copy this sales area to CRM
    3. extend the sales view(Z009/71/71 ) of BP 300027 in ECC
    4. check this sales view for BP 300027 exists in CRM
    than I create sales order in CRM,I use sales organizaion Z009/71/71,BP 300027,but when I press ENTER,the error occurs.
    Could anybody help me and give me some advices,many thanks!

    Hi Curry
    Shalini has correctly pointed out the essentials required for price determination am using the same below:
    Sales Org...........................Z009
    Distribution Channel............71
    Division..............................71
    Customer Pricing Procedure ( can be seen in the transaction type Customizing)
    Document Pricing procedure.( Can be ssen in the business partner-sales area data)
    You need to check all these perameters, if the correct values are maintained for them. However if you are using your CRM installation for the first time then there is one important thing which you need to check. In the above mentioned essentials the Division plays a major role as dispite of the fact that the sales area is available in CRM system it is important to check if the Division is activated for the Sales Order Header or not. If the division is not activated then even if you maintain all the values system will throw the error that pricing data could not be read for the respective BP.
    Following is the process to check the same and maintain the necessary values:
    1. follow the path IMG -> CRM -> Master Data -> Organization Management -> Division Settings -> Define Use of Division and Dummy Division.
    2. Put a tick mark in the check box Header Div. Act. and save your settings. Now check the transaction again.
    Hope this help.
    Cheers
    Avi

Maybe you are looking for