DMEE - 1 tree with many format

hi,
need advice on this.
i got request where they will create 1 payment method for E-banking. and inside it there will have many kind of bank file formats.
so what i did was, i create 1 new DMEE format tree with type PAYM. and inside, i create a few segment groups; represent each bank format. izzit right to do this? the problem now, i don know how to put the condition for each segment group. fyi, i hv never use this DMEE and not sure and familliar on each tab function.
thx a lot

I have a similar case at hand.
Out of one DMEE tree I need to produce two (or perhaps three) files.
The reason is that I need a different format if the amount of the payment is below or above a threshold amount.
I know it sounds strange but this is the business requirement.
I can solve the problem if I use more payment methods, but this creates other complications (master data maintenance, etc).
So, my question is: is it possible to produce more than one files out of a single dmee tree?
If yes, then, how?

Similar Messages

DME Tree for PAYMUL format

Hi,
I am creating DME tree by modifying standard DME tree 'DK_PAYMUL_DOMESTIC' standard format is configured with One Lin, Multiple SEQs, I got a requirement of mapping DME structure with One Lin, One SEQ.
Please let me know.
Regards,
Anand

Hi,
I met the same problem with you and I have read the article above. But could you please let me know more detailed information?
I have created two examples:
First, two invoice for the same vendor but different currency. The output file can show LIN1 SEQ1....LIN2 SEQ++1 correctly.
Second, two invoice for different vendors and same currency. Only the first invoice shows in output file.
If you know what's the problem about this?
Thanks,
Lisa

Working with many different formats/codecs/frame rates within one Sequence.

Good Afternoon,
As an editor for an ad agency I am being tasked with cutting a demo reel together. Nothing too difficult.
The reel is to include video footage of past projects, going back a couple years or so. The footage that I will be given will undoubtably be in a variety of formats, codecs, frame sizes, frame rates, etc (all SD, though). Delivery is SD DVD.
My question is this:
What is the best way to set up my timeline for a barrage of clips with differing specs?
Do I encode all the media assets FIRST to conform to my Sequence Settings? Or do I just deal with the large amounts of timeline rendering as I work with different formats and codecs? Or do I....?
I am running FCP 5.1.4, so I don't have the Open Timeline feature going for me.
I appreciate any advice and tips you can offer!
Thanks!

Your final format is NTSC SD DVD, so you're going to have to go to 720x480 at some point. This is what I would upscale to. Make sure your "client" knows that the 320x240 wmv's may not look to good in the final production.
Personally I use MPEG Streamclip (an excellent FREE application that's part of many a pro's arsenal) for this kind of conversion and/or upscaling. It's not particularly intuitive (especially for upscaling) so read the manual.
You may need to get hold of Flip4Mac or Episode for the wmv conversions.
I would tend to convert to a lossless codec like Apple Uncompressed or Animation. You could try going to NTSC-DV but you're going to lose some quality initially and again when you do the final mpeg2 compression.
Experiment.

Too many flat files with different formats.

Hi gurus,
i have a headache problems. that is follows:
We will upload data from flat files,but you know there are about 100 .xls files and with different formats.
and as you know the datasource of the flat file must correspond to every fields of the flat file.
but you know there are 100 flat files and if we donot do any optimise,we will create about 100 transformation and 100 datasource to meet our requirements.
but that seems impossible.
is there any good idea to decrease the number of transfomation ?

Hi AK1987,
To import flat files with dynamic columns, we can use Script Task inside a Foreach Loop Container to parse the first row of the flat file to get the columns names and save them into a .NET variable, then, we can create “Create Table” script based on this
variable, and then store the script into a SSIS package variable. After that, we create a staging table based on the package variable, load the flat file data to the staging table. Eventually, we load data from the staging table to the destination table. For
the detail steps, please walk through the following blog:
http://www.citagus.com/citagus/blog/importing-from-flat-file-with-dynamic-columns/
Regards,
Mike Yin
TechNet Community Support

HT4168 I have created an 100 page booklet in Pages, with many photographs, can I export it to ePub, and make an electronic book, because it says that "Note: The Pages document must have been created using a word processing template"?

I have created an 100 page booklet in Pages, with many photographs, and much written word, can I export it to ePub, and make an electronic book, because it says that "Note: The Pages document must have been created using a word processing template"?....
Basically what I want to do is publish the document into both an eDocument, and a hard copy document. What is the best way to do this?

No Peter, this statement came right off the Apple ePub statement when outlining how to use ePub. the full context is:
Creating ePub files with Pages
Summary
Learn how to create ePub files with Pages.
Products Affected
Pages '09
ePub is an open ebook standard produced by the International Digital Publishing Forum. Pages ’09 lets you export your documents in ePub format for reading with iBooks on iPhone, iPad, or iPod touch.
iBooks supports both ePub and PDF file formats, and you can export both from Pages.
When to use ePub or PDF
Use ePub when text is the most important part of your document, for example when you create a book, a report, a paper, a thesis, or classroom reading material.
More details on using ePubUse PDF when layout is the most important part of your document, for example when you create a brochure, a flyer, or a manual with multiple illustrations.
More details on using PDF
Creating an ePub Document to Read in iBooks
You can export any Pages word processing document to the ePub file format for reading in an ePub reader, such as the iBooks application on the iPad, iPhone, or iPod touch. Documents created in page layout templates can’t be exported to the ePub format.
Documents exported to ePub format will look different than their Pages counterparts. If you want to get the best document fidelity between the Pages and ePub formats, style your Pages document with paragraph styles and other formatting attributes allowed in an ePub file. A sample document is provided on the Apple Support site that features styles and guidelines to help you create a Pages document that’s optimized for export to the ePub file format, which you can use as a template or a guide. To learn more about using paragraph styles in Pages, see the topics under the heading “Working with Styles” in the Pages built-in help.
To read your ePub document in iBooks on your mobile device, you must transfer the ePub file that you create onto your device.
To use the “ePub Best Practices” sample documentTo learn more about using the ePub format and get a better feel for how a Pages document might appear as a book in iBooks, it’s a good idea to download the “ePub Best Practices” sample document. After reading the guidelines and instructions within the document, you can use it as a template to create your own document. You can also import the styles from the sample document into a new document you create.
Download the “ePub Best Practices” sample document at the following web address:
http://images.apple.com/support/pages/docs/ePub_Best_Practices_EN.zip
Do either of the following:Use the sample document as a template.Import the paragraph styles from the sample document into a new or existing Pages document.
Export the document you create to ePub format to see how it looks in iBooks.
Preparing an existing Pages document for export to ePub format
Documents exported to the ePub format automatically appear with page breaks before every chapter. A table of contents is automatically generated, which allows readers to jump quickly to any chapter title, heading, or subheading in the book. In order to create a meaningful table of contents, it’s important to apply appropriate styles within your document. The ePub reader uses the paragraph styles to determine which items should appear in the table of contents for your book.
Note: The Pages document must have been created using a word processing template.

All fields with !Format event blank when printing

A client asked for assistance creating a new shipping label template with Adobe Output Designer 5.5, a program I've not used before. I had no problem creating the layout, and slapping the necessary fields on there (they had a few other templates I was able to use as examples). When I use Test Presentment from within Output Designer, the results look great - all the data fields and barcodes show up fine. When actually printing a label from Prophet 21, all the fields with !Format events defined are completely missing. I copied many of these !Formats from existing templates and adjusted them slightly to match the new label format, so I'm not sure why all those fields in the new template end up blank. I haven't made any changes to the default template preamble, which I've included below. What simple detail am I overlooking that's needed to make this work? Like I said, this is not a program I have much familiarity with, and a couple hours of experimenting and searching the web have proved fruitless.
JFPREAMBLE:
^comment ************************************************************************************
^comment * NOTE. Because the custom properties JFPREAMBLE_n
^comment *             will be overwritten when you compile you should
^comment *             apply your preamble overrides to the JFPREAMBLE
^comment *             custom property following the reference to the
^comment *             ^FILE DOCVAR:JFPREAMBLE_1 DICTIONARY below.
^comment ************************************************************************************
^FILE DOCVAR:JFPREAMBLE_1 DICTIONARY
^comment *    Preamble overrides...
JFPREAMBLE_1:
^inline on
^comment ***************************************************************************************
^comment * NOTE. The JFPREAMBLE_n custom properties will be overwritten
^comment *             when you compile the form.
^comment *
^comment *             Preamble changes should be made to the JFPREAMBLE
^comment *             custom property.
^comment ***************************************************************************************
^define group:PO_NUMBER_COMBO!Format       @("K@CUSTOMER_PO_NUMBER.")
^define group:ITEM_ID_COMBO!Format         @("P@ORDERED_AS_SCRIPT.")
^define group:SUPPLIER_CODE_COMBO!Format       @("1456")
^define group:LOT_CD_COMBO!Format          @("T@LOT_CD.")
^define group:SERIAL_COMBO1!Format         @("S@PICK_TICKET_NO.@Line_Number.")
^define group:UNIT_QTY_ON_LABEL_COMBO!Format       @("Q@USER_DEFINED_QTY_PER_LABEL.")
^define group:SERIAL_COMBO2!Format         @("@PICK_TICKET_NO.@Line_Number.")
^define group:SUPPLIER_SERIAL_COMBO1!Format       @("1456@PICK_TICKET_NO.@Line_Number.")
^define group:SUPPLIER_SERIAL_COMBO2!Format       @("3S1456@PICK_TICKET_NO.@Line_Number.")
^comment
^comment **************************************************************************
^comment *    End of Adobe Output Designer generated preamble.
^comment **************************************************************************

Hi David,
Please send me your ifd and a sample data file so that I can investigate what is happening (log files etc.)
cheers
Chris
[email protected]

Problem in Tree with in a table

Hi Experts,
I have created a WDC which contains the tree with in a table.
I have created a table in the view and a Master column in it.
Initially i loaded the tree with some values in my WDDOINIT of my view.
I have also created the event handler for that Master column i.e., OnLoadChildren event handler.
I have written some code in it, so that this event handler method will be called when i try to expand a node in the table.
Unfortunately, the debugger is not getting in to that method, and that event is not being called when i Expand the tree node in the table.
Please suggest me so that i can complete the assignment.
Thanks in advance and for all the help given till now.

Hi
You can join a hierarchical query as you suggest; you can also use SYS_CONNECT_BY_PATH() to identify the subproduct. Here's the kind of query you need - I've used the HR sample data, but you should be able to transform this into products, subproducts etc
select subproduct.first_name, subproduct.last_name, part.job_id, sum(part.salary), count(distinct part.employee_id)
from employees subproduct
left join (
select level lev
     , sys_connect_by_path(last_name,'/') reportsto
     , sys_connect_by_path(to_char(employee_id,'fm0000'),'/') ancestors
     , substr(sys_connect_by_path(to_char(employee_id,'fm0000'),'/'),7,4) subprodid
     , emp.*
from employees emp
start with employee_id = 100 -- like identifying the product
connect by prior employee_id = manager_id
) part
on part.subprodid = to_char(subproduct.employee_id,'fm0000')
where subproduct.manager_id=100
group by subproduct.first_name, subproduct.last_name, part.job_idYou'll see I've used a fixed format connect_by_path (with 4 digits per level) which makes it easy to pull out the second level.
HTH
Regards Nigel

I did a presentation with many images and animations, now I need to change only the images without modify the related animations. How can I do it?

I did a presentation with many images and animations, now I need to change only the images without modify the related animations. How can I do it?
I use Keynote 09

Select the image you want to change and go to Format Menu>Advanced>Define as Media Placeholder (or command, option, control i).

Design View Not Displaying Pages with any Formatting

I asked this question in another thread and somebody locked it. The question is not answered. My Design view is not displaying my files with any formatting. I can view them in a browser, but not in Design view where I can see my work as I'm working. While I can upload files to the remote server (host provider) the links got screwed up so files on the remote server don't show any formatting either. Every link, thousands of links, are off by one word (folder) from where my site was residing on my hard drive. When I try to make a change to the links manually then I can no longer view them with any formatting in my own browser either.
On my local broswer on my PC the address line reads: http://localhost/folderNameIneedToDelete/filename.php
On the live website (for my homepage) the address line reads http://websiteName.com/folderNameIneedToDelete/index.html
(Here is the text from another thread that was improperly locked)
I just added a remote server to my site so I could begin uploading files to my host provider. When I saved the setup I saw a message popup about the cache changing. Now when I try to view a file in Dreamweaver in Design View it doesn't recognize any of the external style sheets. It displays with no formating.
I can still view the pages in a browser and they look appropriate, just not in Design View where I can continue working on the site as I've been doing.
How do I get Design View to display my pages properly again using the .css pages that apply to each page design?
Thanks,
Robert

Murray, thanks for all your assistance.
Before I edit thousands of links again I want to confirm I've interpreted all your info correctly. If I setup everything as follows all my pages should work in Design View, browsers accessed from the "Preview/Debug in browser" icon in Dreamweaver and most importantly in a live environment at a host provider:
Site Setup
Site - Site Name: anything including spaces
Site - Local Site Folder: C:\wamp\www\rootfoldername\
Servers - Testing Server (Testing: checked)
Server Name: Testing Server
Connect Using: Local/Network
Server Folder: C:\wamp\www\rootfoldername\
Web URL: http://localhost/rootfoldername/
Remote Server - Maintain synmchronization information: checked
Remote Server - Automatically upload files to server on Save: unchecked
Remote Server - Enable file check-out: unchecked
Testing Server - Server Model: PHP My SQL
Version Control - Access: None
Advanced Settings - Local Info - Default Images Folder: C:\wamp\www\rootfoldername\_images\
Advanced Settings - Local Info - Links relative to: Document
Advanced Settings - Local Info - Web URL: http://sitename.com/
Advanced Settings - Local Info - Case-sensitive links checking: unchecked
Advanced Settings - Local Info - Enable Cache: checked
Advanced Settings - Cloaking - Enable Cloaking: checked
Cloak files ending with: unchecked
Advanced Settings - Design Notes - Maintain Design Notes: checked
Advanced Settings - Design Notes - Enable Upload Design Notes for Sharing: unchecked
Advanced Settings - File View Columns - Name: Built In - Show
Advanced Settings - File View Columns - Notes: Built In - Hide
Advanced Settings - File View Columns - Size: Built In - Show
Advanced Settings - File View Columns - Type: Built In - Show
Advanced Settings - File View Columns - Modified: Built In - Show
Advanced Settings - File View Columns - Checked Out By: Built In - Show
Advanced Settings - Contribute - Enable Contribute compatibility: unchecked
Advanced Settings - Templates - Don't rewrite relative document paths: checked
Advanced Settings - Spry - Asset Folder: C:\wamp\www\rootfoldername\SpryAssets\
Site File Structure - place files in the following folders:
C:\wamp\www\rootfoldername
webpages (html & php)
_images - [folder] (there are numerous image folders beginning with _images) containing .jpg and .png files
_includes - [folder] containing attached .php files for the header, navigation and footer attached to every page
_scripts - [folder] containing .js script files
_styles - [folder] containing .css files (external style sheets)
Connections - [folder] contains one php file (databasename.php)
SpryAssets - [folder] containing system generated .js files .css files and .gif files
ZendFramework - [folder] - I have no idea if the files in this folder are necesary and why it was placed here many months ago
** Links **
Remove the leading / from every link in every file
HTML5 shiv
using an external link will always reflect the latest changes(Question) - If I link to this .js file externally at google instead of linking to a current copy in my _script folder could future changes to this external .js file cause future problems with the webpages that have this file attached?
Remote Server
Setup a remote server using the ftp address settings provided by the host provider. (Question) Any settings defined for the future Remote Server (the first remote server was deleted when problems occured) will not cause any harm to anything involving the Testing Server such as viewing webpages in Design View, browsers accessed from the "Preview/Debug in browser" icon in Dreamweaver and will not cause any harm to any files eventually put to the host provider via that future Remote Server. Is that correct?
Murray, thanks again for your help,
Robert

Hierarchical query with many-to-many relationship

I have read with interest the creative solutions to complex hierarchical queries posted previously; they have been instructive but have not quite addressed this scenario.
We have a hierarchy table H, with columns for ID, name, parentID, and other attributes.
Within this table are a number of independent hierarchies, each existing for a different purpose.
We have a master list of hierarchies in table T which describes the purpose of each hierarchy, provides some default attributes which the nodes can inherit, and stores a unique id for each hierarchy and a pointer to the root node of the corresponding hierarchy in table H.
We have a master list of items M, with identically named columns to those in H, along with many other attributes.
The members of table M ALL belong to EACH of the Hierarchies. So we have a link table I to define the intersection of H and M.
So the leaf nodes of H are really containers for the list of elements from M which may be attached to them.
The universe of M is very volatile, with new members being added, old ones deleted, and existing ones being reclassified frequently from node to node within each hierarchy. Since the hierarchies have to be built to handle every possible scenario, so that the members of M can always find a suitable node to reside in, quite often, in fact more often than not, the majority of leaf nodes for each hierarchy are empty at any given moment.
Therefore, although we always know the root sector of a given hierarchy and can traverse downwards from there, if we worked our way up from the intersection table, we could eliminate up to 70% of the nodes of any given hierarchy from further consideration, as they don't need to be (in fact, must not be) included in reports.
As implied by the above, rows in M are structurally similar (in terms of columns, but not in any real world sense) and are a superset of rows in H. But combining them into the one table doesn't seem to help the reporting process due to the many-to-many relationship which prevents the ID/parentID relationship from being carried through to this level.
There are a number of other considerations of which the most pertinent is that the people using this database generally have an interest in only a subset of the master list of items in M. This relationship is also dynamic but important enough and rigid enough that another link table P exists to combine the Users in table U with the subset of M in which they are interested. (The users are also grouped into hierarchies of a totally different nature, but this aspect is secondary for now.)
The reporting is reasonably straightforward for any single combination of User and Hierarchy; they want to see all the items they are interested in, listed in hierarchical sequence, totalled on change of level with the individual items M listed beneath the nodes of H. This is unfortunately required in real time, so retrieval performance is paramount.
Some statistics might help to determine the optimum approach:
The largest hierarchy has 10,000 nodes. The smallest about 100.
The largest would have 70% or more of its nodes unused at any point in time, and even the smallest would have 25% unused.
The hierarchies tend to be broad rather than deep, the maximum number of levels being about 5; but the larger ones should be twice as deep as this if performance was not compromised.
There are dozens of hierarchies, but it may be possible to sharply reduce this number by exploiting the Order Siblings By clause.
The number of rows in M varies between 500,000 and 50,000; depending upon how long historical data is retained on-line (and performance permitting, it would be retained indefinitely).
The number of users varies between 1000 and 2000 but the range of M in which they are interested varies greatly; from as few as 100 to as many as 10,000+. So it is almost always worth beginning by eliminating the items in which they are not interested, implying once again that the hierarchy should be traversed upwards rather than down from the root.
The current system is very old and survives by a tactic of building what are essentially materialised views of the database structure for each user overnight using, ahem, non-relational technology. This is inefficient and not easily scaled (but it works) and hence this redevelopment project needs to (a) work, and (b) work better and faster.
I am happy to provide some DDL scripts if that helps explain the problem better than this narrative.
I can't help feeling that the solution lies in somehow extending the hierarchical query past the many-to-many link table so that the Master list can be merged directly into the hierarchy such that the M items become the leaf nodes rather than the design outlined above - but I don't know how to do that. But I am sure everyone reading this does! :)
All advice appreciated. Database version is not an issue; we are currently using version 10XE for experimentation, but production usage could be on 11 if that contains helpful features.
Thank you
CS

Hi,
ChrisS. wrote:
I am happy to provide some DDL scripts if that helps explain the problem better than this narrative.Yes, please do.
The problem seems interesting, I'm sure many people here (including myself) are willing to help you in this matter.
So yes, post DDL for the tables, as well as INSERTs to populate them with representative data. Please also include the output you require along with detailed explanations about the logic to get it.
Don't forget to put lines of code between {code} tags in order to preserve formatting and readability, like this :
SELECT sysdate FROM dual;Thanks.

I have started migration système to transfert from hold Macbook pro to New MacBook air application starter successfully for several hours. But since more than 3 hours I got the message transferring Time zone paramètres with time left less than 1 minute.

Hi
I have started migration système to transfert from hold Macbook pro to New MacBook air
Application starter successfully for several hours.
But since more than 3 hours I got the message "transferring Time zone paramètres " with time left less than 1 minute.
Any recommendation or suggestion to solve it ?
Many tanks

If it has run for 3 hours it's probably done and you can quit Migration Assistant and reboot the new computer. In the future rather than using Migration Assistant I would recommend using Startup Assistant which tends to be a bit more reliable and does not create a new user account as MA does. If you're interested here is an article explaining Setup Assistant tips.
Roger

Premiere Pro CS3 crash with many video files

Hi
I got back from my Ski vacation with many short (few minutes) videos which I took on Canon P&S camera, about 50 files.
I imported the 50 files to Premiere and tried to work on a movie, but everything works slow and every few commads the premiere crashes.
I notice that for each new file I add to the project 20K of rams are used - 1G for 50 files. I also get message of low resources from premere which recommend to save my works.
The video are standard video (not HD) 30fps, and the project is also standard.
Why is this happening?
Does the premiere have a limitation for number for files to be imported?
Does it have problem with the video format?
How can I overcome this and get a stable editing environment?
Thanks

Sorry for the CAPS Lock, I was writing from my mobile, and for some reason it was locked
so you do not recommend any of those codec package. How are you dealing with all video and audio formats, and subtitles? ffdshow does all for me.
dont' worry I dont have Klite installed
so you belive that if one of two codecs you recommened installed well and working it will solve my problem and work much better then FFDSHOW
I also have the option for converting the file to another format. under what name will I found a sutible format in the conversion software?

Time Data loading with missing format

Hi expert,
after we load time data, find the following missing information:
0CALDAY:
20.080.112 (Error)
2008.01.12 (correct one)
0CALMONTH:
200.801(Error)
2008.01(correct one)
0CALQUARTE
20.081(Error)
20081(correct one)
Could anyone let us know how to correct data with missing format to correct one and how to do this step by step? Many thank!

What is the source for this data ?
Have it corrected in the source
Or
Correct in PSA and load it from there.
Does it happen only for a few records ?

Appointment Letters with different formats

Hello Experts,
I want to generate appointment letters for different departments using different formats. How to create different formats for each department.
Kindly advise.
Regards,
Devendra.

The first question is can I do this with Reports?Yes, its possible in Oracle Reports. You can create multiple layouts in one report.
Also sometimes I will need to print some forms with
one format and not others. It can be done in reports. You have to use format trigger to hide or show a layout.
Is there a way to configure the report to print some
forms with their format if they have data and others
not if they don't have data.You can create a summary column on a group to check how many records it has and in format trigger of the particular layout (frame) hide and show the layout based on this summary column.
--- You have to use frame's format trigger to hide or show a layout
http://www.oracle.com/webapps/online-help/reports/10.1.2/state/content/navId.3/navSetId._/vtTopicFile.htmlhelp_rwbuild_hs%7Crwrefex%7Cplsql%7Ctriggers%7Ctr_format_trigger%7Ehtm/

Camera just died... should I stick with MiniDV format?

I only need SD and I want to make sure I get a camera that works well with FCP 6. Should I stick with MiniDV format or are there Memory Card or Hard Drive based cameras that work well for SD shooting and FCP? Thanks

Hello Bruce,
What kind of budget are you looking at when it comes to the purchase of your next camera?
As a previous owner, I highly recommend purchasing a used, low hours, Panasonic AG-DVX100B.
It is a fantastic camera, I don't want to start up a war of the SD cameras in this thread but I personally believe it is the best SD camera ever made. And many others feel the same way. It can shoot in multiple frame rates (24P, 24PA, 30P, and 60i) and with the cameras scene files it makes it easy to get the look you want. It is built like a tank and with the Leica lens you get very good quality with no need to transcode to a different format for FCP.
Do some research on them if you haven't already. I guarantee you wont be disappointed if that is the route you took. I know I wasn't.

DMEE - 1 tree with many format

Similar Messages

Maybe you are looking for