Dmesg error.... Test WP failed, assume Write Enabled

Hi all....
there seems to be some kind of error going on. When I type
$dmesg | tail -3
[ 1398.681274] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1398.683528] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 1398.683542] sd 4:0:0:0: [sdb] Assuming drive cache: write through
This is repeated throughout the log files. And the funny thing is I don't have anything connected i.e. no usb drives, no secondary hdds. Also,
$df -h /dev/sdb
Filesystem Size Used Avail Use% Mounted on
/dev 493M 0 493M 0% /dev
What am I missing here?
Update:
Found a similar thread : https://bbs.archlinux.org/viewtopic.php?pid=1059099
Seems like its the card reader afterall.....
Last edited by whzee (2012-02-17 10:06:28)

Looks like the firmware update solved it.

Similar Messages

OracleCachedRowSet error: The RowSet is not write enabled

Hello,
I'm trying to used OracleCachedRowSet class from the ocrs12.jar (Oracle 9.2 Client) with an Oracle 9i Database.
When I try to insert a new row in the row set I get the error message "The RowSet is not write enabled, SQL State: null". I don't know what I have to do to write enable the row set. I think I do the same as described in Appendix A of the Manual JDBC Developer's Guide and Reference. I also tried to set the concurrency to ResultSet.CONCUR_UPDATABLE. Unfortunately I didn't find the JavaDoc API documentation of this class. It is not included in the Oracle/JDBC documentation.
The code looks like this:
OracleCachedRowSet rowSet = new OracleCachedRowSet ();
rowSet.setUrl("jdbc:oracle:oci:@MYDB");
rowSet.setUsername("MYDB");
rowSet.setPassword("MYPWD");
rowSet.setCommand(sqlStatement);
rowSet.setType(ResultSet.TYPE_SCROLL_INSENSITIVE);
rowSet.setConcurrency(ResultSet.CONCUR_UPDATABLE);
rowSet.execute();
System.out.println ("--- Row set after first select ---");
printResultSet (rowSet);
rowSet.moveToInsertRow ();
rowSet.updateString ("KUNDENID","4711");
rowSet.updateString ("VORNAME","Fred");
rowSet.updateString ("NACHNAME","Mayr");
rowSet.insertRow();
The row set contains the right data after the select statement is executed!
What is wrong? Where do I find the API documentation?
Thomas Mayr

Hello Avi,
thanks for your reply (even if it's nor vey helpful). I read off course the general description of the standard Java interface CachedRowSet (which is implemented by OracleCachedRowSet). I also implemented the scenario with Sun's reference implementation CachedRowSetImpl. This works by the way with this code fragment (however this implementation has other bugs). I think each implementation needs a certain set of properties which are be defined by the interface? The SQL statement executed is set by the method setCommand() and the statement string is "SELECT KUNDENID,NACHNAME,VORNAME FROM JDBCTEST" (sorry this is missing in the code fragment). The row set is also populated with the content of the table, so the statement execution works. I also tried to populate the row set with a result set created by a prepared statement. But the error message when updating the row set is the same. The code looks like this:
PreparedStatement ps = dbConnection.prepareStatement(sqlStatement,
ResultSet.TYPE_SCROLL_INSENSITIVE,
ResultSet.CONCUR_UPDATABLE);
ResultSet resultSet = ps.executeQuery ();
rowSet.populate (resultSet);
Note that the code fragment is not part of a productive code. It is a test case for row sets which I like to use in a productive code in a completly different scenario. Explicit insert, update or delete statements are not an alternative!

Receive error message: E_IO_CANNOT_OPEN-failed to write to destination file How do I fix?

I encountered this problem when trying to download a book from our public library on my new NOOK. It is our second one. Am wondering if having two active NOOKs, one with my husband as primary user and the new one with me as primary user is the cause.

Presumably you transferred the work file using Explorer or similar, not ADE (digital editions)?
You can transfer non-DRM .pdf files the same way.
If you are trying to transfer from ADE, are you sure that you have authorized the Kobo from ADE for your Adobe ID?
Normally it should give a different message in that case; but ADE messages are erratic, usually incomprehensible and often plain wrong.

Failed to Write Error Message

When trying to transfer a book from Adobe Digital Editions 2.0.1.78765 I get the error message E_IO_WRITE Failed to write to destination. The book shows in the Nook folder, but as 0 KB and cannot be found on the Nook device when unplugged. I don't have a problem transfering from ADE with a second Nook I own, just have a problem with this Nook.

I figured it out. I deleted the Digital Editions folder and then transferred the book without a problem. It quite possibly could have been that my daughter had exceeded the storage capacity of her Nook and there wasn't any room on there to transfer the books.

[solved] "failed command: WRITE FPDMA QUEUED" ATA errors

Hi!
Edit: Thinking about it, this could quite well be the famous "5184 hours" bug on micron SSDs. The 3624 seconds until failure basically scream for it being that issue. I'll do a firmware update after I have performed a backup and see if that helps.
Since shortly (I do not remember it to be linked to a kernel upgrade) I keep getting these error messages after a while, with the system freezing and usually not recovering:
[ 3624.763766] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6 frozen
[ 3624.763777] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3624.763786] ata1.00: cmd 61/08:00:57:a1:14/00:00:00:00:00/40 tag 0 ncq 4096 out
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 3624.763790] ata1.00: status: { DRDY }
[ 3624.764032] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3624.764035] ata1.00: cmd 61/08:f0:ff:80:46/00:00:00:00:00/40 tag 30 ncq 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 3624.764037] ata1.00: status: { DRDY }
[ 3624.764041] ata1: hard resetting link
[ 3630.100435] ata1: link is slow to respond, please be patient (ready=0)
[ 3634.796593] ata1: COMRESET failed (errno=-16)
[ 3634.796609] ata1: hard resetting link
[ 3640.133287] ata1: link is slow to respond, please be patient (ready=0)
[ 3644.829517] ata1: COMRESET failed (errno=-16)
[ 3644.829529] ata1: hard resetting link
[ 3650.166146] ata1: link is slow to respond, please be patient (ready=0)
[ 3679.894424] ata1: COMRESET failed (errno=-16)
[ 3679.894438] ata1: limiting SATA link speed to 1.5 Gbps
[ 3679.894443] ata1: hard resetting link
[ 3684.910856] ata1: COMRESET failed (errno=-16)
[ 3684.910871] ata1: reset failed, giving up
[ 3684.910875] ata1.00: disabled
[ 3684.910883] ata1.00: device reported invalid CHS sector 0
[ 3684.910888] ata1.00: device reported invalid CHS sector 0
[ 3684.910891] ata1.00: device reported invalid CHS sector 0
[ 3684.910969] ata1.00: device reported invalid CHS sector 0
[ 3684.910971] ata1.00: device reported invalid CHS sector 0
[ 3684.911077] ata1: EH complete
[ 3684.911110] sd 0:0:0:0: [sda] Unhandled error code
[ 3684.911113] sd 0:0:0:0: [sda]
[ 3684.911115] Result: hostbyte=0x04 driverbyte=0x00
[ 3684.911118] sd 0:0:0:0: [sda] CDB:
[ 3684.911120] cdb[0]=0x2a: 2a 00 00 46 80 ff 00 00 08 00
[ 3684.911129] end_request: I/O error, dev sda, sector 4620543
[ 3684.911134] Buffer I/O error on device sda1, logical block 577560
[ 3684.911143] EXT4-fs warning (device sda1): ext4_end_bio:286: I/O error writing to inode 1309793 (offset 5537792 size 4096 starting block 577568)
[ 3684.911161] sd 0:0:0:0: [sda] Unhandled error code
[ 3684.911163] sd 0:0:0:0: [sda]
[ 3684.911901] Buffer I/O error on device sda3, logical block 12682192
[ 3684.920707] systemd-journald[128]: Failed to write entry (20 items, 542 bytes), ignoring: Read-only file system
The computer is a thinkpad T410i, with this ATA controller:
» lspci |grep ATA
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06)
and this hard drive:
# smartctl -a /dev/sda |grep Model
Model Family: Crucial/Micron RealSSD m4/C400
Device Model: M4-CT128M4SSD2
Google and the error message suggest this is related to errors in the communication between the SATA controller and the hard drive. Usually things like "try another SATA cable" or "try a better power supply" are suggested, so I tried removing and re-inserting the drive into the slot; that didn't help though. What could I do now? I guess swapping the SATA cable or trying a better power supply is out of question
The disk itself seems fine to me, here's the SMART report:
# smartctl -a /dev/sda
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.10.6-2-ARCH] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Crucial/Micron RealSSD m4/C400
Device Model: M4-CT128M4SSD2
Serial Number: 000000001142031CDAA0
LU WWN Device Id: 5 00a075 1031cdaa0
Firmware Version: 0009
User Capacity: 128,035,676,160 bytes [128 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Tue Aug 20 02:16:50 2013 CEST
==> WARNING: This drive may hang after 5184 hours of power-on time:
http://www.tomshardware.com/news/Crucial-m4-Firmware-BSOD,14544.html
See the following web pages for firmware updates:
http://www.crucial.com/support/firmware.aspx
http://www.micron.com/products/solid-state-storage/client-ssd#software
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 595) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 9) minutes.
Conveyance self-test routine
recommended polling time: ( 3) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 050 Pre-fail Always - 0
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
9 Power_On_Hours 0x0032 100 100 001 Old_age Always - 6002
12 Power_Cycle_Count 0x0032 100 100 001 Old_age Always - 2557
170 Grown_Failing_Block_Ct 0x0033 100 100 010 Pre-fail Always - 0
171 Program_Fail_Count 0x0032 100 100 001 Old_age Always - 0
172 Erase_Fail_Count 0x0032 100 100 001 Old_age Always - 0
173 Wear_Leveling_Count 0x0033 098 098 010 Pre-fail Always - 73
174 Unexpect_Power_Loss_Ct 0x0032 100 100 001 Old_age Always - 0
181 Non4k_Aligned_Access 0x0022 100 100 001 Old_age Always - 4034 1449 2584
183 SATA_Iface_Downshift 0x0032 100 100 001 Old_age Always - 0
184 End-to-End_Error 0x0033 100 100 050 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 001 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 001 Old_age Always - 0
189 Factory_Bad_Block_Ct 0x000e 100 100 001 Old_age Always - 82
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 0
195 Hardware_ECC_Recovered 0x003a 100 100 001 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 100 100 001 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 001 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 001 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 100 100 001 Old_age Always - 0
202 Perc_Rated_Life_Used 0x0018 098 098 001 Old_age Offline - 2
206 Write_Error_Rate 0x000e 100 100 001 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 5684 -
# 2 Short offline Completed without error 00% 5550 -
# 3 Short offline Completed without error 00% 3843 -
# 4 Extended offline Completed without error 00% 1835 -
# 5 Short offline Completed without error 00% 1319 -
# 6 Short offline Completed without error 00% 244 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Any ideas would be very much appreciated.
Cheers,
Sven
Last edited by scummos (2013-08-23 18:44:52)

Looks like the firmware update solved it.

Error message "test page failed to print" in windows 7 ultimate 32 bits

I have installed printer a hp deskjet 1515 in windows 7 ultimate 32 bits and it is successfully installed, however when I tried to test print out there showed message "test page failed to print. Would you like to view the print troubleshooter
for assistance?". I tried to clicked Yes and running the troubleshooter until completed but the result still the same showed the same message above when test print again.
Please need assistance how to solve this problem
Thanks
Sopyan

Hi Sopyan,
On current situation, please refer to following steps and check if help us to troubleshoot this issue.
1. Please check if use the correct printer driver and also check if need to update it.
2. Please check if firewall was enabled or third-party security application ran. Please temporarily disable them and monitor the result.
3. Please use another administrator account to logon and print again, then check if this issue still exist.
4. Please open Event Viewer and check if find some relevant events or errors.
If any update, please feel free to let us know.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Credential Roaming failed to write to the Active Directory. Error code 5 (Access is denied.)

Hi All,
I could see following error event in all client computers , Could you please some one help me on this ?
Log Name:      Application
Source:
Microsoft-Windows-CertificateServicesClient-CredentialRoaming
Event ID:      1005
Level:         Error
Description: Certificate Services Client: Credential Roaming failed to write to the Active Directory. Error code 5 (Access is denied.)
Regards, Srinivasu.Muchcherla

If you are not using certificates and Credential Roaming for clients then simply ignore the error message.
If you are using certificates then you are getting access denied message when Credential Roaming is trying to write to your AD. More details about Credential Roaming here: http://blogs.technet.com/b/askds/archive/2009/01/06/certs-on-wheels-understanding-credential-roaming.aspx
http://blogs.technet.com/b/instan/archive/2009/05/26/considerations-for-implementing-credential-roaming.aspx
This is probably related to the fact that your schema version not 44 or higher: https://social.technet.microsoft.com/Forums/windowsserver/en-US/5b3a6e61-68c4-47d3-ae79-8296cb3be315/certificateservicesclientcredentialroaming-errors?forum=winserverGP
Active Directory
ObjectVersion
Windows 2000
13
Windows 2003
30
Windows 2003 R2
31
Windows 2008
44
Windows 2008 R2
47
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Error message on brand new WLC2504; "Failed to write...."

Hello!
I have received a new WLC2504 for my lab, which is nice.... :-)
What's not so nice is that I get a mysterious error message on the console. It appeared when the wizard started at first boot and it apperars at every startup since.
I have gone through the wizard twice and reset to factory defaults in between but the error message persists. It looks like this :
(Cisco Controller)
Enter User Name (or 'Recover-Config' this one-time only to reset configuration to factory defaults)
User: Failed to write I2C device: Input/output error
[i2c_wr_to_wdt_timer_reg]Got error -1 during tx.
User:
Is this unit ready for RMA/DOA or can I somehow force it into normal behaviour..?.. The GUI appears to be working normally.
Best Regards
Göran Blomqvsit
Sweden

I would suggest talked to TAC & RMA if that is their view on this.
Normally you should not get any errors like this on console, if it is working properly
HTH
Rasika
**** Pls rate all useful responses ****

[Flat File Destination [220]] Error: Failed to write out column name for column "Column 2"

I am using SSIS to extract fixed width data into a flat file destination and I keep getting below error. I have tried almost everything in this forum but still no solution. can anyone help me out to solve this problem.
[Flat File Destination [220]] Error: Failed to write out column name for column "Column 2".
[SSIS.Pipeline] Error: component "Flat File Destination" (220) failed the pre-execute phase and returned error code 0xC0202095
Thanks

Hi Giss68,
Could you check the Advanced tab of the Flat File Connection Manager to see whether the InputColumnWidth and the OutputColumnWidth properties of the Column2 has the same value? Please refer to the following link about the same topic:
http://stackoverflow.com/questions/10292091/how-do-i-fix-failed-to-write-error-while-exporting-data-to-ragged-right-flat-fil
If it doesn’t work, please post the sample data and the advanced settings of Column2 for further analysis.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

N7K F1 TCAM limitations ("ERROR: Hardware programming failed. Reason: Tcam will be over used, please enable bank chaining and/or turn off atomic update")

Platform/versions:
# sh ver
kickstart: version 6.2(2)
system:    version 6.2(2)
# sh mod
Mod Ports Module-Type                         Model              Status
1    32     10 Gbps Ethernet Module             N7K-M132XP-12      ok
2    48     1000 Mbps Optical Ethernet Module   N7K-M148GS-11      ok
3    32     1/10 Gbps Ethernet Module           N7K-F132XP-15      ok
4    32     1/10 Gbps Ethernet Module           N7K-F132XP-15      ok
5    0      Supervisor Module-1X                N7K-SUP1           ha-standby
6    0      Supervisor Module-1X                N7K-SUP1           active *
I recently tried to add a couple of "ip dhcp relay address" statements to an SVI and received the following error message:
ERROR: Hardware programming failed. Reason: Tcam will be over used, please enable bank chaining and/or turn off atomic update
Studying this page I was able to determine, that I seemed to be hitting a 50% TCAM utilization limit on the F1 modules, which prevented atomic updates:
# show hardware access-list resource entries module 3
         ACL Hardware Resource Utilization (Module 3)
                          Instance 1, Ingress
TCAM: 530 valid entries   494 free entries
IPv6 TCAM: 8 valid entries   248 free entries
                          Used    Free    Percent
                                          Utilization
TCAM                      530     494     51.75
I was able to workaround it be disabling atomic updates:
hardware access-list update default-result permit
no hardware access-list update atomic
I understand, that with this config I am theoretically allowing ACL traffic during updates which shouldn't be allowed (alternately I could drop it), but that's not really my primary concern here.
First of all I need to understand why adding DHCP relays are apparently affecting my TCAM entry resources?
Second, I need to understand if there are other implications of disabling atomic updates, such as during ISSU?
Third, What are my options - if any - for planning the usage of the apparently relatively scarce resources on the F1 modules?

Could be CSCua13121:
Symptom:
Host of certain Vlan will not get IP address from DHCP.
Conditions:
M1/F1 Chassis with Fabric Path Vlan with atomic update enable.
On such system if configured SVI with DHCP is bounced that is if we shut down and bring it up may cause DHCP relay issue.
Workaround:
Disable Atomic update and bounce the Vlan. Disabling Atomic update may cause packet drops .
Except that ought to be fixed in 6.2(2).

Using digital editions 2.0, I cannot transfer books downloaded to digital editions from library to my nook. Error message: failed to write destination file.

Using digital editions 2.0, I cannot transfer books downloaded to digital editions from the library to my nook. I get an error message: failed to write destination file. At first, this happened once in a while but now every time. Help!!!

Modern kobo books should just use regular Adobe DRM and be readable on compatible ereaders that are authorized to the correct Adobe ID.
I understand older kobo book had different DRM: but I wouldn't expect those to
When Adobe DRM book information say 'no copying', that generally means no copying outside those Adobe DRM limitations.
You should be able to copy within the restrictions. You can double-check that with the sellers (Kobo).
Just double-checking
the pocket book is Adobe DRM compatible?
that you have authorized your pocket book with your current Adobe ID?
menu/Help/Authorize Device when plugged into ADE: Library/Authorize Device if using the older more reliable ADE 1.7.2
If the pocket book is already authorized but to a different ID, you will need to deauthorize it first, ctrl-shift-E to ADE with device plugged in (or cmd-shift-E on Mac).
Be aware that will lose the ability to read DRM books authorized with the previous ID.

Getting "file failed to write" error while syncing.

I am syncing IPADs and IPODs (big family) over USB to a windows based machine. During large syncs it often fails with a message like "file failed to write." It is random as to which file fails. In fact if I keep trying it eventually syncs everything. It's like each file has some chance of failure and I just need to try enough times. It takes forever. Please help!
Some details
- I have updated with latest iTunes
- I have tried different USB cables and USB slots on the computer
Thanks.
-- C

Check out this Apple article -> 'Disk cannot be read from or written to' when syncing iPod or 'Firmware update failure' error when updating or restoring iPod
If you have a USB hub, try removing it and connecting the iPad or iPod to the back of the computer. If it isn't caused by the USB connection, the article suggestions will be a good place to start.

When burning my pictures to CD, a burn failed, medium write error came up.

When burning my pictures from IPhoto to a CD, a burn failed, medium write error showed up,

Like many other suggestions I found, I went ahead and purchased a lens cleaner. The CD instructions said to insert and play track 2, but my drive would just keep ejecting the CD. But it worked! That and a little compressed air.
Before using the lens cleaner and compressed air, my drive would constantly give me a medium write error and always make loud vibrating noises that sounded like my drive was about to explode. But now it writes like a charm and is completely silent!

An error encounter on test devise (real devise) i.e "apple mach -o linker error linker command failed with exit code 1", please any body help me to solve the problem

Hello, I am using tesseract api in my app, which run perfectly on simulator but on test devise (real devise) it is showing an error i.e "apple mach -o linker error linker command failed with exit code 1", please any body help me to solve the problem

if you can't compile the webutil.pll in your forms developer you need to set the forms_builder_classpath in you windows registry. You have to add the frmwebutil.jar,jacob.jar to the registry key. The configuration files you mention are for running the forms.

Ebook error message: "Fail to write destination file error"

I am attempting to transfer ebooks (checked out via my library's ebook consortium) from Adobe Digital Editions to my Nook. I have done this in the past with no issues, but recently I have been getting the following error message: "Fail to write destination file error".
I know the issue is NOT lack of space on my Nook (I cleared it of all info and still received the error message).

I had this problem as well, and after doing some research via google (because I found NOTHING helpful in adobe forums), I found the problem....my Nook was full. I had no idea this was even possible! But, I borrow a lot of library books, and didn't realize that after they expire, they are still taking up space on my Nook. Here's how to check: plug your Nook into your computer, go to file manager (right-click the start button in Windows), find the Nook drive and right click, choose properties. This should show you a pie chart of used/free space on your Nook. If this is the case, you need to remove some files from your Nook. For me, I had to find the Digital Editions file and delete all the thumbnails and actual files for the library books. If it's booked you've purchased, perhaps you need to archive some books. Hope this helps!

Dmesg error.... Test WP failed, assume Write Enabled

Similar Messages

Maybe you are looking for