DML Program not visible in AWM

I have created a DML program with return type none in Analytic Workspace Manager. The program contains a Consider statement to assign an equation to a formula. The program compiles successfully however, the next time I log into AWM the program is no longer visible through the gui and the return type has been changed to dimension. If I execute an Edit program command through OLAP worksheet I can see the contents of the program. Why can I not see programs with Consider statements through my gui?
Kristine

I figured it out! This is an odd one. In my program I have statements similar to below:
CNS ...
LD ...
EQ ...
If I place a space infront of LD like below I am able to expand the programs list in AWM which was my 2nd issue I had mentioned in my last post:
CNS
+(single space)+ LD
EQ
Now if I place a space infront of EQ like below I am able to see my program through the GUI:
CNS
+(single space)+ LD
+(single space)+ EQ
It appears that both LD and EQ need at least one space before them, in other words they cannot be left justified against the program window. They do not necessarily need to be indented in respect to the CNS statement, for example the below format should work fine as long as there is a space before LD and EQ.
+(single space)+ CNS
+(single space)+ LD
+(single space)+ EQ
Kristine
Edited by: Kristine W on Feb 4, 2009 12:55 PM

Similar Messages

Request not visible in the version management of a Report Program

Hi,
We Imported an external request into the SAP System.
The request was imported successfully and a program already existing is updated with that request,
The problem is that the request number is not visible in the Version Management of the Report Program, but the other Programs have the request number visible in the version management, we could not find the request number in that particular program
We tried reimporting the request but the request is not visible.
Regards

Check the transport logs and see if there are any erros/warnings.

PSE10 not visible in my "Installed" Programs - W7

My licensed PSE10 is not visible in my Win7 Control Panel - "Programs and Features" - yet my PSE10 runs well
I tried to uninstall it with the installer program - but it quit and gave an error asking me to attempt it again
how do we repair an installation if we canot uninstall it, and there is no 'repair' feature to choose?

when I try to uninstall from the setup.exe file - it gives me an error -
Error 2343. Specified Path is empty
with an "OK" to click
Then it tells me the Installer was interrupted and try try again

Programs installed but not visible in application folder

I am having a strange problem. Only a few of my programs are showing up in the application folder. If I search for the programs using the finder window they are there and the path at the bottom of the finder window shows they are in applications, and can be used but they just are not visible in the application folder (root folder).
Any suggestions how I can make these programs visible.
Thanks

Try this as a start:
Enable Finder to Show Invisible Files and Folders
Open the Terminal application in your Utilities folder. At the prompt enter or paste the following command line then press RETURN.
defaults write com.apple.finder AppleShowAllFiles TRUE
killall Finder
To turn off the display of invisible files and folders enter or paste the following command line and press RETURN.
defaults write com.apple.finder AppleShowAllFiles FALSE
killall Finder
Alternatively you can use one of the numerous third-party utilities such as TinkerTool or ShowHideInvisibleFiles - VersionTracker or MacUpdate.
Do both items. Sometimes simply setting the Finder to show invisible files then turning off the option will make those invisible applications reappear. Sometimes it doesn't work. In that case you can try the following:
1. Enable the Finder to display invisible files. Leave the Terminal active.
2. Enter the following command line in the Terminal
sudo chflags -R nohidden
Put a space after "nohidden", select all the invisible applications you could not see and drag the selection into the Terminal window. Press RETURN. You will be prompted for your admin password. Enter it. It will not be echoed. Press RETURN.
3. Disable the Finder's display of invisible files.

Drop down boxes do not show up. My tabs are not visible. I could barely see the box to type in this question. Something is off. I deleted and reinstalled program it is still just floating words. I work on a Mac with ox 10.6.8

The browser boxes, tabs, and links do not show up with the needed outlines, colors, and shapes. This box I am typing in was barely visible. Above this box is a set of two verticle parallel bars. When I moused over it, I saw it was for inserting a link, but if I had not been curious I would not have known what those lines were for. When I look at this page on PC I have a colored blue backdrop. It is not visible on the Mac. The search box does not have the image of the magnifying class and the arrow does not show up where it should be. The words Post Question just appear below the statement we have made some educated guesses about your browser. I thought maybe it had been a theme that was applied, but I do not see how it could have come on when I trashed the old version of the firefox.

A;though the CSS is very well documented, there are those that ignore those signs. Look at the following
/* Menu item containers, position children relative to this container and are a fixed width */
ul.MenuBarHorizontal li
    margin: 0;
    padding: 0;
    list-style-type: none;
    font-size: 100%;
    position: relative;
    text-align: left;
    cursor: pointer;
    width: auto;
    float: left;
The rest have been given a width of 15em, so this value may be a good start.
DESIGN INFORMATION: describes color scheme, borders, fonts
/* Submenu containers have borders on all sides */
ul.MenuBarHorizontal ul
    border: 1px solid #CCC;
   width: auto;
    background-attachment: fixed;
Just keep the border property and remove the other two.
BROWSER HACKS: the hacks below should not be changed unless you are an expert
/* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
ul.MenuBarHorizontal iframe
    position: absolute;
    z-index: 1010;
/* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
@media screen, projection
ul.MenuBarHorizontal li.MenuBarItemIE
          display: inline;
          f\loat: left;
          background: #FFF;
The following is the original for the above
BROWSER HACKS: the hacks below should not be changed unless you are an expert
/* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
ul.MenuBarHorizontal iframe
    position: absolute;
    z-index: 1010;
    filter:alpha(opacity:0.1);
/* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
@media screen, projection
    ul.MenuBarHorizontal li.MenuBarItemIE
        display: inline;
        f\loat: left;
        background: #FFF;
Cheers,
Gramps

MS Project 2013 Trial Download not visible in installed programs and thus can't open

I've consulted other posts however answer is not listed. I have followed the instructions to download the file. I've downloaded the 64-bit file and selected Open application on download however nothing happens. I've gone to my Control Panel
and Project 2013 is NOT listed. I've searched for Project 2013 in the start up menu to no avail.
Can anyone advise how I can get the software installed on my laptop? The fact it states the application has downloaded but it's not visible as a downloaded file is driving me crazy.
Please help
Marisa

Hello Marisa,
When you download the trial, it downloads the image file by name ProjectProfessional_x64_en-us.img
Do you see this file under your download folder? If yes, then you have downloaded the trial software successfully.
As a next step, you need to extract .img into a directory using any tools that unzip the .img format (e.g., 7-zip
http://www.7-zip.org/ ) and then install from it by running setup.exe.
Hope this helps.
Thank you,
Kiran K

How do I view data from OLAP DML program or statement?

Hi
I'm struggling to find any information on this topic anywhere on the net:
How to view data produced by an Oracle OLAP DML program or statement.
Background :
I am using the latest AWM to create and maintain dimensions, cubes and measures. However, I've noticed that AWM, Discoverer OLAP, BI Beans, Excel Plug-In et al only provide a fixed set of formula and expressions.
For example, I wanted to created a Standard Deviation (STDEV) on measure. After much searching I learnt that I could do this by creating a custom measure in AWM by importing a measure defined in an XML dcoument as it's not provided by AWM. The output in Discoverer OLAP on the surface seems to give the correct results, however when drilling from high level to lower level of time time dimension hierarchy Discoverer includes the parent value in the calculation and renders the values incorrect.
My alternative is to use OLAP DML, as it provides a richer range of formuale and calculations possibilities and I was hoping to use this functionality to do create the measures. I have the distinct impression, however, that OLAP Worksheet is the only interface out there to do this.
It seems very primitive and limited with regards to data output, almost like SQL*Plus in many ways.
The burning questions I have are :
1) Do I need to write DML programs to perform these custom measure calculations and add them to cubes or do I import the custom measures via AWM and XML?
2) If the answer to question 1 is DML programming, is there a way of viewing the OLAP data output through a GUI interface without embedding the statements in SQL.
3) Has anyone experienced or noticed the same problem with Discoverer OLAP, AWM Viewer that I mentioned above? i,e, statistical functions performed on whole dimension hierarchy rather than lower levels.
I'm hoping someone out there knows what I am trying to do or get at. Keith, any ideas or suggestions?
Thanks
Kind Regards
Greg

Hi Greg,
There are two ways to achieve what you want. Both require the use of custom calculations which cannot be created via the calculation wizard within AWM. To do this the easiest way is step outside of AWM and use the Excel Calculation utility that is on the OLAP OTN home page:
Creating OLAP Calculations using Excel
http://download.oracle.com/otn/java/olap/SpreadsheetCalcs_10203.zip
Readme
http://www.oracle.com/technology/products/bi/olap/OLAP_SpreadsheetCalcs.html
(Oracle OLAP DML Reference contains a list of all the OLAP functions that can be used to create a custom calculation. http://www.oracle.com/technology/products/bi/olap/OLAP_DML_10.2.zip)
The Excel tool lets you assign your own formula to a measure and then uploads that measure definition into your AW. It is possible to import a custom calculation template into AWM using the menu option on the Calculated Measure node of each cube, but it is safer to use the Excel Worksheet as this directly uses the public XML API and is always best to use a public API rather than hacking XML templates.
There are two types of custom calculation:
1) Formula: using a formula you can directly call any of the OLAP functions. For example to create a measure that returns the standard deviation for a measure then you would enter the following as the formula for your calculated measure:
stddev(sales_revenue, time)
The easiest way to test if the measure is working as expected is to use the data viewer within AWM.
2) Programs - if the function you need is not provided or you want to do special processing to return a result you can create an OLAP DML program which can return a result. To do this use OLAP Worksheet to define the program and add a datatype to the DEFINE statement, such as :
DEFINE PRG_SD_SALES PROGRAM DECIMAL
In the program return the value you have calculated within your program. Within the program you can do just about anything but be aware that your program is going to fire for every cell within your virtual cube so it must be efficient and fast to execute. For a measure then you would enter the following as the formula for your calculated measure:
prg_sd_sales(time, products, geographies, channels).
The actual program code would look something like this:
DEFINE PRG_SD_REVENUE PROGRAM DECIMAL
PROGRAM
argument T_TIME TIME
argument T_PRODUCT PRODUCTS
argument T_GEOGRAPHY GEOGRAPHIES
argument T_CHANNEL CHANNELS
variable D_RETURN decimal
TEMPSTAT TIME, PRODUCTS, GEOGRAPHIES, CHANNELS
do
limit PRODUCTS to T_PRODUCT
limit CHANNELS to T_CHANNEL
limit GEOGRAPHIES to T_GEOGRAPHY
limit TIME to T_TIME
limit TIME add descendants using TIME_PARENTREL
limit TIME keep TIME_LEVELREL 'CAL_MONTH'
D_RETURN = stddev(SALES_REVENUE)
doend
return D_RETURN
END
This code computes a standard deviation the all months within the specified time range, at year level for all 12 months, at quarter level for the three months within the quarter ans returns NA at the month level.
As the code executes within a implicit loop you can only change the status fo dimensions that for part of that implicit by using the TEMPSTAT command. To test the program at the command line use the OLAP Worksheet and the SHOW command to just return one cell of data, DO NOT SIMPLY USE THE RPR COMMAND because you will have to wait for the whole cube to be returned. If you want to use the RPR command make sure you limit your base dimensions first! You can use PRGTRACE to debug your program code it is not working as expected. Again, the easiest way to test if the measure is working as expected is to use the data viewer within AWM, although this will not return debug information so send all your debug output to a file to capture any errors and/or trace the execution flow.
Hope this helps
Keith Laker
Oracle EMEA Consulting
BI Blog: http://oraclebi.blogspot.com/
DM Blog: http://oracledmt.blogspot.com/
BI on Oracle: http://www.oracle.com/bi/
BI on OTN: http://www.oracle.com/technology/products/bi/
BI Samples: http://www.oracle.com/technology/products/bi/samples/

Reporting Flag is not visible in the manage screen

Hi BI Experts, Good morning.
We load the inventory data daily in the night time which is delta load.
5 days back, we got 0 records and the request is in red.Then i rerun the infopackage manually and got the total records in to the cube.
From that day onwards its running successfully.
Yesterday i deleted the bad request from infocube.
But the Reporting flag is not visible.
Today i didnot get the records.
Please can anyone tell me the process.
Thanks in advance.
Regards
Anjali

Hi Nagesh,
Still i am not getting reporting flag.
I tried what did u say.
And today i did not get the records. Infopackages didnot run. It shows in red.
I tried to run it manually but it gives error.
The error message is:
Short text
    An exception occurred that was not caught.
What happened?
    The exception 'CX_RSR_X_MESSAGE' was raised, but it was not caught anywhere
     along
    the call hierarchy.
    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program 'SAPLRRMS' has to be
    terminated.
Please give me the reply.
Thanks in advance
Regards
Anjali

I updated win7 and now I cant see ff. I have reinstalled it 5 times now. It shows it is running in task manager but it is not visible on the desk top.

I installed win7 ultimate and then ff. ff worked fine until I installed win7 service pack 1 and all the other updates it recommended. I click to open ff and nothing happens. I look in task manager and it shows it is running. It is not visible on the screen or in the task bar. I have reinstalled a fresh download of it 5 times. I even tried the beta version but still the same problem. I can use explorer and chrome ok but not ff.

The "System Tray" is located at the very bottom right of your screen and is a list of most/all running applications that will show in this list.
For your SysFader issue, this "may" be the problem:
1 Find the "My Computer" desktop icon and right-click it. A pull-down menu will appear. Select "Properties."
2 Click on the "Advanced" tab. This will load a new page of options.
3 Select the "Visual Effects" tab at the top of the window and deselect "Animate Windows when minimizing and maximizing," "Fade or slide menus into view," "Fade or slide Tool Tips into view" and "Fade out Menu items after checking."
4 Click "OK." This will remove most if not all of the Sysfader effects, at the same time correcting related errors that used to come up during opening a new file or program.

Follow-on documents are not visible in MIRO in TEST server, awsys = PRD300.

Dear Experts ,
The Test Server was refreshed around mid-June 2011 with data of
Production Server. The follow-on documents are not visible for the
invoice documents in MIRO in TEST server due to value in tables
BKPF,RBKP : field : AWSYS = PRD300 .
The newly created Purchase Orders after the refresh, the accounting
documents can be seen for the Goods Receipt (MIGO_GR-display) and
Invoice documents (MIRO).
we had already raised this issue in March & got the feedback from SAP
as shown below.
accordingly we have developed & run the program "zzlogsys2" which
updates the Logsys/Awsys field from PRD300 ( of production server ) to
that of the current server i.e. TST300 as required.
after which the FI documents for the material documents are visible in
MIGO,but follow-on documents are not visible for the invoice documents
in MIRO.
we have Checked notes 781498 and 28958 to see if the logical system is
correctly assigned , where we found that in table RBKP after entering document number, Fiscal Year , the
Field AWSYS is "PRD300" & not "TST300" as it should be. We will take up the activity of updating table RBKP
also as we are currently doing for tables MKPF & BKPF.
But to have clear picture as to what we are doing is correct , pl
advise about the following :
1) Is it a correct process done by our SAP-Basis team , that every time
any Server ( e.g. Test or Quality ) is refreshed with Production server
data, the Field AWSYS in various transaction tables gets value as
"PRD300" which then is required to replaced by running program such as
ZZlogsys.
REPORT ZZLOGSYS.
TABLES: T000, MKPF.
DATA: NEW_SYS LIKE MKPF-AWSYS.
PARAMETER: OLD_SYS LIKE MKPF-AWSYS.
SELECT SINGLE * FROM T000 WHERE MANDT EQ SY-MANDT.
NEW_SYS = T000-LOGSYS.
CHECK NOT NEW_SYS IS INITIAL.
UPDATE MKPF SET AWSYS = NEW_SYS
WHERE AWSYS = OLD_SYS.
WRITE:/ 'Number of updates: ', SY-DBCNT.
2) if the above process is correct & normal , then which are the other
tables in a particular server ,apart from tables MKPF,BKPF,RBKP , which
needs to be updated the value of field "AWSYS" in the same way
replacing value "PRD300".
3) if the process in point no. 1 is not correct , then what is the
correct process that the Basis team can do while refreshing any target
server with production data so that target server retains its value in
Field AWSYS & not showing "PRD300".
With 3 servers TEST,DEV & Quality , recently refreshed with production
server to bring all servers in Sync for a HR patch application, we have
this situation now in all 3 servers .
Thanks in advance ,
Anil Shanbhag

It is appropriate to move this thread from ERP-MM to [Enterprise Resource Planning (ERP)|Enterprise Resource Planning (SAP ERP);
Edited by: Jeyakanthan A on Jul 7, 2011 4:56 PM

E-Recruiting - Internal Candidates not displayed in candidate search, job postings not visible for internal candidates in job search

Hi Friends,
We are on EREC standalone model. Initial data transfer between HR to EREC master data using PFAL is done.
All employees have got NA, CP, US, BP in HRP 1001 in EREC system.
Change pointers are also activated in HCM system, now current master data changes are also in reflecting in EREC system thro IDOC posting.
But when recruiter logs into portal and does a candidate search, no internal candidates are appearing ?
1) What needs to be done for internal candidates to visible during candidate search ?
2) Also while logged as internal candidate, released requisitions are not visible for internal candidates while they try to search for internal job postings ?
Kindly provide your inputs.
Regards,
ER.

Hi,
In SLG1, getting the below error messages for multiple times.
"Error while calling content extraction class CL_HRRCF_CEC_QUALI_WITH_PROFCY
The error occurred in program CL_HRRCF_SES_BUSOBJ_FROM_SPTYPCM001 line 96
Qualification 52000001 does not exist
The incorrect HR object has the key 01NA60000029 "
"The error occurred in program CL_HRRCF_ALE_EE_INBOUND"
Also please state how to differentiate internal and external candidate search pages.
Regards,
ER.

Time Capsule internal hard drive not visible

I have one of the older 500GB TC. It worked fine for a year then I decided to wipe the hard drive to erase the contents. I stopped the process in the middle of clearing the hard drive because it was going on about 8 hours. Every since then the TC works fine as a wireless router, but the internal hard drive is not visible. It won't do any back ups and it's not visible in the Airport program.
Any suggestions?

See Pondini's TM FAQs.
iMac refurb (27-inch Mid 2011), OS X Mavericks (10.9.4), SL & ML, G4 450 MP w/Leopard, 9.2.2

Footer is not visible in Table control at runtime

hi everybody i read some thread about footer not visible...but unable to conclude what to do should for paginator but doing this lightspeed will be losing...what is paginator and lightspeed
Second should leave how it visible at run time i.e without footer....and with scroll at leftside

>what dose lightspeed rendering engine means?.
Lightspeed is the name of the rewritten rendering engine in Web Dynpro as of NetWeaver 7.01. It has many new features and in particluar large performance improvements over the 7.0 version of the rendering engine.
>Can we use ajax in webdynpro?
NetWeaver 7.01 and higher with Lightspeed activated has AJAX in the rendering framework. It is used by some of the UI elements and by the delta renderer itself. You can not directly use AJAX in your programming model, however, for validation or other such approaches. Web Dynpro remains a server side programming model with AJAX to support some UI elements (SuggestValues, ThresholdSlider, etc).
>Can we design the view in different color front i means can we design as we required
You can create a Theme using the Portal Theme Editor or the Eclipse based standalone theme editor. Themes are the only supported way to change the color scheme or design of Web Dynpro applications.

DNG changes made in LR4 not visible in LR3

I am working on a MacBook Pro with both Lightroom 3 and Lightroom 4 installed. I wanted to test my assumption DNG is a DNG and that changes made to a DNG in LR4 would be visible in LR3, so I made changes to a DNG in Lightroom 4, clicked Update DNG Preview and Metadata and then exported that file as a DNG. I imported that DNG into a different Lightroom 3 catalog and the changes were not visible, even after choosing Read Metadata from File. Those same DNG changes were not visible in Bridge either. The changes are visible in the Finder, but not in Preview. Anyone know why and how I can make Lightroom 3 recognize the DNG changes made in LR4?

Your DNG is original-image-data + an adjustment recipe stored as metadata that tells LR how to display and export the image. Your DNG does not contain adjusted image data like a TIF or JPG would.
Your adjustments are probably in Process Version 2012, new to LR4, and only understood by LR4 and ACR 6.7/ACR 7.x and newer. The embedded JPG preview in the DNG is what LR4 put there.
There is a difference between a DNG being understood as a valid raw file by older Adobe products which it can, and those older products knowing how to interpret the adjustment recipe, which they can’t.
Specifically, LR3 doesn’t know how to interpret PV2012 adjustments, since it was last updated in 2011 and only knows about PV2010 and earlier.
Other non-Adobe programs, like Finder, can only see the embedded JPG preview which is the LR4 rendering, but LR3 re-renders the image using its own interpretation of the settings it can understand.

After Effects are not visible when exporting in Adobe Premiere Pro CS4

I have made a simple name/title bar for an interview video, using Adobe After Effects. When i import the composition to Premiere Pro it's visible in the preview window BUT; when I render the video in Premiere Pro the After Effects clip is not visible anymore. AND when i export the complete sequence to a .wmv file, the After Effects clip is not visible either.
I'm not that much of an expert in Premiere Pro or After Effetcs, so hopefully this can easily be solved.
What is it that i'm doing wrong?
Thanks in advance!

The names are the same, but the programs are very different... CS4 is 32bit, CS5 and later is completely rewritten to be 64bit
So, there is a different forum for CS4 and earlier http://forums.adobe.com/community/premiere/premierepro_previous?view=all

DML Program not visible in AWM

Similar Messages

Maybe you are looking for