Reporting Flag is not visible in the manage screen

Hi BI Experts, Good morning.
We load the inventory data daily in the night time which is delta load.
5 days back, we got 0 records and the request is in red.Then i rerun the infopackage manually and got the total records in to the cube.
From that day onwards its running successfully.
Yesterday i deleted the bad request from infocube.
But the Reporting flag is not visible.
Today i didnot get the records.
Please can anyone tell me the process.
Thanks in advance.
Regards
Anjali

Hi Nagesh,
Still i am not getting reporting flag.
I tried what did u say.
And today i did not get the records. Infopackages didnot run. It shows in red.
I tried to run it manually but it gives error.
The error message is:
Short text
    An exception occurred that was not caught.
What happened?
    The exception 'CX_RSR_X_MESSAGE' was raised, but it was not caught anywhere
     along
    the call hierarchy.
    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program 'SAPLRRMS' has to be
    terminated.
Please give me the reply.
Thanks in advance
Regards
Anjali

Similar Messages

I seem to have lost Sony AVCHD files while importing them into iPhoto. The 50p files were not visible in the Import screen. iPhoto 9.6.1.

System: Yosemite 10.10.2
Iphoto: 9.6.1
iPhoto 9.6.1 does not seem to recognize 50p AVCHD files from my Sony WS350x camera, so they are not imported, but are deleted from camera when the question is asked in the importscreen !!!
Why is that ? I am not happy....
Workaround: Should I import the media files with Sony's Playmemories sw first ?
Herman

The problem with AVCHD is that there are a wealth of codecs and very little standardisation further, these aren't files, but clusters of interlinked files that make up the data stream.
So read this
Using AVCHD video with iPhoto '11 - Apple Support
Bear in mind that not all Codecs are supported.
As an FYI: A note on AVCHD: This format was developed for people who are shooting to edit the material afterwards. If you're shooting to edit, then iMovie or Final Cut are the correct home for this material. If you're not shooting to edit consider using one of the other video formats on your Camera.

Request not visible in the version management of a Report Program

Hi,
We Imported an external request into the SAP System.
The request was imported successfully and a program already existing is updated with that request,
The problem is that the request number is not visible in the Version Management of the Report Program, but the other Programs have the request number visible in the version management, we could not find the request number in that particular program
We tried reimporting the request but the request is not visible.
Regards

Check the transport logs and see if there are any erros/warnings.

I updated win7 and now I cant see ff. I have reinstalled it 5 times now. It shows it is running in task manager but it is not visible on the desk top.

I installed win7 ultimate and then ff. ff worked fine until I installed win7 service pack 1 and all the other updates it recommended. I click to open ff and nothing happens. I look in task manager and it shows it is running. It is not visible on the screen or in the task bar. I have reinstalled a fresh download of it 5 times. I even tried the beta version but still the same problem. I can use explorer and chrome ok but not ff.

The "System Tray" is located at the very bottom right of your screen and is a list of most/all running applications that will show in this list.
For your SysFader issue, this "may" be the problem:
1 Find the "My Computer" desktop icon and right-click it. A pull-down menu will appear. Select "Properties."
2 Click on the "Advanced" tab. This will load a new page of options.
3 Select the "Visual Effects" tab at the top of the window and deselect "Animate Windows when minimizing and maximizing," "Fade or slide menus into view," "Fade or slide Tool Tips into view" and "Fade out Menu items after checking."
4 Click "OK." This will remove most if not all of the Sysfader effects, at the same time correcting related errors that used to come up during opening a new file or program.

CN41 Customer Fields for WBS not visible in the CN41 report

Hi,
I have Done the Below Steps:
I have done all the Things Below and it is working Also.:
Create structure CI_PRPS.
Create enhancement.
Edit the function exits.
Maintain the global declarations.
Design the customer-specific screen.
Activate the enhancements in CMOD.
Generate the structures in the Project Information System.
In CJ20N i have these customer fields as a new Tab and i am also able to save the data in the Database also.
My problem comes not in transaction execution but in Reporting.
When i run the Report CN41 the fields which i have added into the PRPS using the Include CI_PRPS is not displayed in the Report.These fields are available in the selection screen but not available in the report when i execute the Report and do choose fields to display collums in the report.
I am getting these fields in CN43 but not in CN41.
In CN43 also the Values are comming in ####### but not in correct values.
Also when i tried to Run the Report RCNCT001 it is asking for the access Key.
Thanks

Hi,
I have Done the Below Steps:
I have done all the Things Below and it is working Also.:
Create structure CI_PRPS.
Create enhancement.
Edit the function exits.
Maintain the global declarations.
Design the customer-specific screen.
Activate the enhancements in CMOD.
Generate the structures in the Project Information System.
In CJ20N i have these customer fields as a new Tab and i am also able to save the data in the Database also.
My problem comes not in transaction execution but in Reporting.
When i run the Report CN41 the fields which i have added into the PRPS using the Include CI_PRPS is not displayed in the Report.These fields are available in the selection screen but not available in the report when i execute the Report and do choose fields to display collums in the report.
I am getting these fields in CN43 but not in CN41.
Thanks

Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1 - which is what introduced the bugs.

Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1 - which is what introduced the bugs.
The only thing that I can think of that might be causing the issues that I have a Mac Mini on Mavericks.
Dave

Hi
I have discovered that my question above is a non-question. A user triggered by looking at the below article about Illustrator 2014 cc 17.0.2
http://helpx.adobe.com/illustrator/release-note/illustrator-17-0-2-release-notes.html
He had recently upgraded from wht we now know is 18.0 to 18.1 which is the latest version. He read the above artic
le and supposed that it was a bug fix release for his version - because the v17 ov18 number is not often displayed. It is usually just 2014 CC.
I have asked him to post a bug report about Adobe Illustrator CC 2014.1
Dave

Reporting tab is not shown in the console

hi everyone
the reporting tab is not shown in the service manager console, the topology i am using is 2 servers [one for DW and the other for management server] both servers have their SQL server installed on each one, could you please tell me how i can start to get
this working or the steps i have to follow ?? isn't supposed to be working out of the box ? i have checked reporting services and they are running

Probably your report server is not pointing to the DWDATAMART database, try login to:
http://YourDWDatabase/Reports/Pages/Folder.aspx?ItemPath=%2fSystemCenter%2fServiceManager&ViewMode=List
click on DWDATAMART Connection, under connection string, do you see your DWDATAMART DB name and server name?
Antoine AL Ibry

Supplier not visible in the Purchase Order Menu

Hi All,
I have created a Supplier and a Supplier Site from the back end using Supplier Conversion.
It was successful and I am able to see the customer in the Supplier menu in Payables and Supplier base menu in the Purchasing, but the supplier is not visible in the Purchase Order Menu in Purchasing.
I have Enabled the following flags in the Supplier Site Level,
               l_vendor_site_rec.purchasing_site_flag := 'Y';
               l_vendor_site_rec.pay_site_flag := 'Y';
               l_vendor_site_rec.rfq_only_site_flag := 'Y';
What else do I need to enable in Supplier level for the Supplier to be visible for Purchasing.
Please give me a solution so that I can resolve my issue.
Thanks in advance.
Regards,
Bhaskar.

Hi,
You will have to achieve this through APIs, Please do some google and refer Oracle docs.
Following are some links, which may interest you:
R12 Oracle Apps: Supplier or Vendor Creation API
Oracle EBS Technical Step By Step: August 2012
Hope this helps!
Best Regards

The "J2EE process table" node not visible in the SAP MMC

For Netweaver 7.0 - The "J2EE process table" node not visible in the SAP MMC.
Details for below
SAP Systems Manager
SAP AG
Version: 7100.109.15.8983
Window Xp
Any suggestions would be apperecited.
Thanks
Srini

It's hard to say without seeing the code for TreeTable. But they probably have something like an addNode mothod for the TreeTableNode which will take care of all the updates for you. If you want to do it youself, you will probably have to get the data Model (tree.getModel()???)behind the TreeTable and use one of the fire... methods on it like fireRowChanged(???) or fireTableChanged(???). I would suspect Sun would do it this way.

SAP RM: How can I create a Node when the node is not visible for the user

Hi,
Product: SAP records Management for Public Sector
Version: 7.00
is it possible to create a instance node when the model not is not visible for the active user?
I looked in the CL_SRM_XML_REC_MODEL but every methode I used gave me no results with the special user.
Regards and thanks for every beginning
Fanninger Thomas

Hi,
here an example.
When I use the method CL_SRM_XML_REC_INSTANCE->IF_SRM_XML_POID~GET_ALL( POID_TAB COUNT_USER_REST COUNT_POID_AUTH ).
When I used the user with no right for viewing the invisible nodes I get no elements in the tabelle POID_TAB and 38 in the value COUNT_USER_REST.
So did any one know a solution you can I create a nodes and change the restriction for the new node with the normal user?
Regards
Fanninger Thomas
Edited by: Thomas Fanninger on Feb 5, 2008 8:15 AM

MRS - Resources and demands are not visible in the Planning Board

Hi Friends - I am working on the the MRSS 610. We have installed it on the our ECC 6.0 as an add-on. We have configured the system as per the configuration guide.
But when I am accessing Manageru2019s Planning Board - /MRSS/PLBOMGR , using the Organization unit, I am getting Notification saying that the resources assigned to the Organization unit are not available in the MRS.
"Resource 00000000010000000000000000000000 not yet created in the WFM Core"
The details of the Error message
"Resource 00000000010000000000000000000000 not yet created in the WFM Core
Message no. /MRSS/SGE034
Diagnosis
Resource 00000000010000000000000000000000 has not yet been created in MRS.
System Response
No assignments have been created for resource 00000000010000000000000000000000, even though, according to the organizational model, this resource is to be taken into consideration in the planning board.
Procedure
Contact technical support.
Procedure for System Administration
Create the resource in question in MRS."
I have run the Report
/MRSS/HCM_RPTWFMIF : Transfers the HR data (availability times, qualifications and the resources itself) into the MRS Basis
But even after that I am not getting the resources in the planning board.
Also I am not able to view the Demands from PM/CS orders.
I have created PM Orders and
Assigned Work centres to the operations and
assigned the Resources to the Operations.
The HR assignment to the work center is also done.
I have tried T Code /MRSS/PLBOSRV - Enter the MRS planning board using a specified order
to pull the order demand. But it is not working
Its giving following message
1004280 is not a valid demand
Message no. /MRSS/SGU139
Diagnosis
The order does not exist in MRS.
This may be because:
The order number has an invalid format.
The order does not exist.
The order is not relevant for planning and has therefore not been transferred to MRS.
The order has been deleted from MRS.
Pls help me on this.
Thanks in advance and warm regards
Purnendu

Hi Anil/Saurabh - Thanks a lot for your replies.
I have checked the MRS configuration as per your suggestion.
It looks fine as per the configuration guide. I have done the PM/CS integration for Orders as demand.
But the Demands are not visible on the Planning Board.
I have checked in the debugging mode what is causing the problem - It looks like
"The Database Table: /mrss/d_dem_h needs entry"
But there are no entries in this table.
I could not find any Customizing transactions or Application transactions for maintaining this table. This is an Application Table for Master and Transaction Data and its Display and Maintenance allowed with Restriction.
I could not also find any transaction for transferring Demand from ECC(R/3) to MRS.
How do I maintain entries in this table?
How do I transfer Demand from ECC to MRS?
Saurabh - I have also been not able to transfer HR Resources from ECC to MRS.
We don't have WFM Core installed in our instance. But MRS should work fine without WFM. MRS Basis should take care of it.
To transfer Employee resources i have run the Program " /MRSS/HCM_RPTWFMIF". But when I execute the transaction with the selection parameters system shows that it is processing (Clock at the bottom Status bar) but it does not shows any result or status.
So I am not sure whether it is executing the program properly.
Pls help me resolve these issues.
Thanks and warm regards
Purnendu

[SOLVED] Reports 6i - Anchors Not Visible on Layout

I am using Reports 6i, and I have two frames anchored together, but the anchor is not visible on the layout. If I randomly click with the mouse in the area I know it's in, I can find it, but other than that it is invisible. Even when it is selected, only the little squares where the anchor touches the 2 frames are visible.
I did not have this issue when I was using Reports 2.5. Any ideas on this?
Thanks in advance,
Kurz
Message was edited by:
Kurzweil4

together, but the anchor is not visible on theUsually it doesn't happen like this. Are frames too close to each other? Close the report builder and re-open again and see if anchor shows up.
And also create a new dummy report (don't need to create a query). On layout, add two frames and anchored together. See if it shows up.

Firefox Downloads not visible in Download Manager sinze FF 16

Firefox Downloads not visible in Download Manager since FF 16 and now update to 17 still same issue...
check the show downloads and the rest even resting the download folder..

I can see the files while being downloaded only when they are done.. they disappear

Dashboard data not visible for the users - buffer issue?

It occurred several times last weeks that some out of 7 dashboards are not visible to the Dashboard users.
The scenario is the same all the time: users fills in the data, reviews it and posts some comments. Next morning the user canu2019t see the data in the system.
What can be the problem?

Hi,
IF your Company has NEtweaver License and the SAPNET User has access right to download section, you must be able to add SP Stacks to Download Basket.
If you have license and use have access, then please contact with local SAP Subsdiary for this problem.
But to be able to download some patches, you must have Solution Manager & Maintanance Optimizer to approve the items in basket.

Webcam not visible in Device Manager

Hello,
after a reinstalltion of windows 7 on my HP Pavilion 55SG the Webcam (HP TrueVision HD) is not visible in the device manager. I´ve searched for drivers of it but on the hp page there are none.
I have already installed cyberlinks youcam, but it says there is no webcam on my pc.
Is there any key combination to activate the webcam?
Thanks in advance!

Dear Customer,
Welcome and Thank you for posting your query on HP Support Forum
It looks like you are facing difficulties with regards to Webcam of your Notebook
We will surely assist you with this issue
Firstly I would like you to know that the Webcam might indeed be disconnected - it happens. The tiny wires that connect the webcam camera are fragile; they might disconnect, become twisted, or be crushed along the hinge area. The damage can occur at any time, or it may never happen. I have had some notebooks for many years in which the webcam has always remained fully functional. Every notebook is different.
Please click on the below shown link to find the troubleshooting steps to resolve the issue:
http://tinyurl.com/ogcpk9g for Windows 7
http://tinyurl.com/ob747gl for Windows 8
HP Technical Support / Customer Service Phone Numbers:
http://tinyurl.com/nxjotk7
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP

Reporting Flag is not visible in the manage screen

Similar Messages

Maybe you are looking for