DMS environment

I have three questions in DMS
We have ERP EHP6.0 and SRM7.0
and we have scenario for Transfering attachment in item level from ERP (PR) to SRM(Shopping Card)
1) Using DMS config(CV01N/DC10/DC30) with 3rd party Server , is it possible transfer item level attachment?.
    We are using BBP_EXTREQ_TRANSFER still now to transfer from ERP(PR) to SRM(Shopping cart) but since its not
   transfering attachment.. we need alternative plan to send the attachment at item level from ERP(PR) to SRM(SC)
    do you think CPPR implementation will solve this issue.?
2) Attaching document using CV01N and DMS config sometimes more complex for each process. so is it possible
   to control this in ADDON.
3)Do we need SAPDB enviornment for DMS
Regards
ckumar

thanks

Similar Messages

Re: Workflow for Document

Hi All,
PLease advise me how to configure a workflow for a document.
I would appreciate if I would be explained step by step.
My requirement is that I create a document. It should go in workflow for approval before it can be released and put is use.
Regards,
Vivek

Hi Vivek,
Refer this link for wokflow configuration in SAP DMS environment. It has some good reference.
You may need to involve some workflow consultant to get your task done.
http://www.saptraininghelp.com/business-workflow/sap-business-workflow-processing-of-document-info-records-pdf-tutorial-342.html
Hope this helps.
Regards,
Deepak Kori

Documents migration

Hi gurus,
THis is my client requirement.
The requirement is like this:
Non sap documents (shared drive) to be migrated to the content server.
a. Company is maintaining its non SAP documents in the shared drive, the volume of these documents are nearly 2 lac. Now these documents have to be migrated to content server (SAP DMS Environment).
Solution:
b. After migrating documents to content server how the user can use the old document as well as new documents in DMS envirnonment.
Solution :
b. In future, the client is planning to maintain all newly SAP DMS documents and non sap documents in the same Sap DMS environment. Is we have to provide separate spacing for the both or ...?. The end user has to have access to old and new documents. Is it possible?
Solution:
Sap R/3 document has to be migrated to the content server.
a. Company is maintaining some documents in SAP R/3, (ie) The PO external documents are attached to the service objects which are in the PO.Now client needs these documents are to be maintained on SAP DMS. is it possible.
Solution:
kindly help me and do the needful
regards
kannan

Hi Kanna,
Kindly find solutions for your queries as below:
a. Company is maintaining its non SAP documents in the shared drive, the volume of these documents are nearly 2 lac. Now these documents have to be migrated to content server (SAP DMS Environment).
Solution: A separate content server is required with appropriate size. For migration needs a abap program for moving directly and at a time from one non-sap server to sap content server.
b. After migrating documents to content server how the user can use the old document as well as new documents in DMS envirnonment.
Solution : Same like new documents in DMS. It will creare DIR's for old as well as new documents. This is maintained in abap program which is said in above (a) solution.
b. In future, the client is planning to maintain all newly SAP DMS documents and non sap documents in the same Sap DMS environment. Is we have to provide separate spacing for the both or ...?. The end user has to have access to old and new documents. Is it possible?
Solution: No. All documents will be saved in same content server. Make a appropriate sizing of content server considering old as well as new data upto next five year.
Sap R/3 document has to be migrated to the content server.
a. Company is maintaining some documents in SAP R/3, (ie) The PO external documents are attached to the service objects which are in the PO.Now client needs these documents are to be maintained on SAP DMS. is it possible.
Solution : No. This is not feasible. Only documents uploaded thru SAP DMS can be stored and saved and accessed thru DMS. The external direct attachments to any other transaction or sap object can't be displayed thru DMS. There is feathure in DMS to check-in documents in content server. And the documents checked-in can be only displayed or accessed thru DMS. Other external attachement can't.
Hope this will very much helpful.
Regards,
Ravindra

Failure at CLONING during upgrade -- quick help needed.

Hi,
I am in the process of upgrade and "PREPROCESSING" step, cloning has failed due to below reasons.
would appreciate your quick feedback on this. Upgrade is for NW7-Ehpi-SPS5
3 ETG011 "START RFCDES -> RFCDES~"
3 ETG011 "ORA-00955: name is already used by an existing obj"
3 ETG011 "ect"
1EETG011 "RFCDES"
3 ETG011 "Error when cloning table structure"
9 ETG011 "CLONING TABLES FAILED"
3 ETG011 "***********(014736)***********"
4 EPU202XEND OF SECTION BEING ANALYZED
Thanks, R

Hi Raj,
Can you please help with my question - [Cloning of DMS environment (as it is Window);
Thanks,
Ajay

XDC - External Document Converter

Hi folks,
we want to print smart-forms forms together with documents (TIFF and PDF) from dem KPro/DMS environment; so we found that via the XDC Interface this would be possible; i also found the documentation for that possibility, but our question is:
does anybody have done that yet
does anybody know what converters are available on the market
kind regards
oliver

Hello All,
I have a requirement in my current project wherein the attachments with SRM PO's are to be printed out along with the PO.
In the SAP implementation guide for this it is mentioned that `SAP
delivers a standard implementation with which you can print and fax
attachment documents' and also mentions that to implement the BAdI ie
BBP_DOC_PRINTDOC the requirement is of installing the SAP interface
External Document Converter (XDC) of the SAP component Print and Output
Management (BC-CCM-PRN).
Does this mean i need a third party tool to make this possible or SAP provides a standard with which we can print and Fax attachement documents which are in word or excel format.
Regards,
Sreejesh

Tool for monitoring OC4J

Hi *,
Is there any tool (eg., swing application) which I can user for monitor my OC4J (deployed ejbs, servlets, pools etc). I don't want to use Web Management Console.
best regards
maciek

From Oracle only the Enterprise Manager Web interface and the DMS Web monitoring tool are what Oracle offers. The DMS environment runs independent EM at:
http://<hostname>:<port>/dmsoc4j/AggreSpy
Doc on this is available at:
http://download-west.oracle.com/docs/cd/A97329_01/core.902/a95102/monitor_oc4j.htm#1019791
Other than those two options Oracle9iAS does have partner monitoring products that may offer a non-web UI - CA, BMC, Mercury Interactive etc have plug ins - these do require an additional purchase of their management environment.
Mike.

SAP DMS - How to do an external DMS configuration for the existing system ?

Hi All.
Greetings.
Request help and understanding.
Am new to the world of SAP. And request SOME clarity for understanding of DMS.
We are wanting to put an external DMS server and wish to configure for the same.
So that the load on the production SAP R/3 database is reduced.
We are now wanting to test the same on Dev environment.
From SDN Link :
I understand that :
DMS basically has a content server. which stores documents.
That can be accessed through Web, SAP R/3 Gui , SAP Portal.
I have gone thro various links and the following links i have found to be informative and helpful :
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c1/1c31a243c711d1893e0000e8323c4f/frameset.htm
http://wiki.sdn.sap.com/wiki/display/PLM/DMS+Customizing
http://help.sap.com/saphelp_nw70/helpdata/en/59/fba637fcf7dc39e10000009b38f8cf/frameset.htm
However, would like to know the following because am not getting the clarity :
1) Is there any supported platform / compatibility guide for DMS ?
if yes, can someone send me the link?
2) We have oracle 11g as our for SAP R/3 backend.
Windows 2003 server 64 bit system.
When i check the system status on the dev server of sap.
It says. ECC 6.0 Rel 7.00 update 20 (hOpe am reading it correctly)
After much search on the SMP site,
we finally discovered and downloaded the DMS software for unicode and / 64 bit.
Which we saw under the maintenance components separately seen for DMS 7.0
Now for this DMS content server which we would like to make it external for storage of documents -
do we need to have a separate database for this purpose as a repository.
If i run a setup of DMS - will that automatically install any default repository for this or
will it allow me to choose any other repository for the same ?
Can anyone advise on this.
Because this link says content server is based on Instance of MAXDB : http://help.sap.com/saphelp_nw70/helpdata/en/59/fba637fcf7dc39e10000009b38f8cf/frameset.htm
3) I read some thing like this on some of the SDN links :
P40 - Integration of DMS
P62 - R&D Document Manage¬ment and Workflow
P71 - Document management
What are they referring to.
4) We would be accessing these thro web, gui, customised portal.
This content server configuration is a bit confusing.
5) Is SNC configuration required to be done for the separate DMS server setup.
If yes, how to do that ? any configuration link for that please ?
Can anyone advise on the things to do.
Steps to do.
What all are the pre-requisites to check, before we start the set up of DMS.
Can anyone help me understand this whole thing regarding the DMS installation and configuration.
Step-wise.. from the start to end.
Because it gives me a lot of uneasiness without having everything in place before we could say we could start the whole process of configuration / installation.
Many thanks for your help in advance.
Wishing you a happy and relaxed weekend.
Kind regards
Indu

Thanks christoph & pradeep kumar.
did a few more research and atleast have come to understand that.
DMS server installation has content server which works only with MAXDB.
So my understanding is correct.
And what we see as Easy DMS is a client installation.
which probably i would look at at a later stage.
Found this link to be a little more informative :
http://www.sapfans.com/forums/viewtopic.php?f=12&t=330558
I really wish. That life were to be so easy. To call a consultant and finish it off
Wishful thinking
thanks and cheers
indu

DMS Document Management from SAP LSO and IT1062

Hi Experts
I need to use the Knowledge Link Infotype (IT 1062) for linking to documents in the DMS for use from within SAP LSO.
I can upload the documents using Tx OAOR, but how do I add the link to the document in IT 1062?
Is there another way of uploading the document which I should be trying?
What is the best / easiest way to upload a document to DMS and also link to it in IT 1062?
Thanks in advance
Anton Kruse

HI Everyone
I`v done a research and i believe its better to do the standard way of managing contents for LSO.
Based on my finding its better to use Kpro(Knowledge provider) for this purpose. DMS and CMS Services both are Kpro Services when DMS uses(in standard way) for documents related to MM and CMS recommended for LSO.
CMS can link to KM(Knowledge management) and also using Authoring Environment you can manage all contents related to LSO.
AE allows you to use external Authoring Tools in order to provide eLearning. indeed you can use CMS repositories to store LSO Docs.
Since you may decide to give users an access to learning material it is a good idea to upload docs in a way that easily being accessible from web.
Integration between CMS and DMS is possible( refer to link below: Integration of CMS & DMS).
Authoring Environment:
http://help.sap.com/saphelp_ls200/helpdata/en/e6/c9e81df5ed11d5997000508b6b8b11/frameset.htm
Integration of CMS and DMS refer to SAP SCN:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/15/aea9375d79fb7de10000009b38f8cf/frameset.htm
Any idea/recommendation/suggestion from you experts warmly appreciated.
Regards,

DMS Content Server installation error

Dear all:
We're now installing our SAP Content Server 640 for our DMS solution. The environment is Windows 2003 x64 Enterprise Edition SP2, SAP Content Server 640, and MaxDB 7.6. In the installtion initial screen, we choose the option to install the content server, the system reports an error even before it starts the installtaion process. The error message is
"FCO-00011 The step changeUserInstall with step key |SAP_CONTENT_SERVER|ind|ind|ind|ind|0|0|Preinstall|ind|ind|ind|ind|0|0|changeUserInstall was executed with status ERROR " in step "initial password manager".
Please help.

hi
download patch for "SAPInst.exe" from Note 929929
May be it will help you.
regards,
nitin
award point if useful

DMS-Document attachment in MIRO

Dear All,
Can we attach documents in MIRO and FB60 transactions.
Regards,
Venkat.

Hi Venkat,
From dms point of view,you want to display (attach)the documents to perticular screen means object link needs to be given.
In standard environment there is no MIRO or MIGO transaction as onject link.You can link to Material Master(MARA).I hope this you already know.
If you want to see dms screen in MIRO or MIGO transaction,you have to go for z-deveploment which can be programe writen by abap consultant.
I hope this will resolve the query.
Regards,
Ravindra

DMS Designing structure

Hi Friends,
We are implementing DMS in our organization. Our file storing system is explained below.
1st level - Vendor name (like Nyro / Hydraulics / techno or code : A112 , A113, A114 etc...)
2nd level - Project name (like 1130 / 1131 / 1132 )
3rd level - Dept. (like Civil / electric/ admin)
4th levl - Incoming / Out going docs.
5th level - Type (like Drawings / docs / memos)
We want to give authorization to one group combination of levels like in 1st level - Nyro, 2nd level- A2, 3rd level -3rd level - admin, so on...our requirement is to store documents at various levels along with authorization.
our requirement is not to have individual doc. authorization, which we can do on each document on authorization tab assigning user / user group.
We need to send the work flow item to different set of persons on storage of document on each level on each status. Like if we store doc. for Nyro - 1130 - civil - incoming - Drawings (considering livels of above example) work flow should go to A1 goup other wise with to another group.
We can do this with classification (by creating characteristics / class and attaching to doc. type) but I can't have authorization at individual class or characteristic , i.e. I can control at doc. type only. Since we have three characters for doc. type code we need to make many doc. types considering above scenario.
If we use three characters of doc. type, lab office or authorization group can be used for other levels but we can't send work flow item.
By using Document structure we can make BOM by linking the two or more docs. with qty.
Is there any best way using SAP DMS ? Now we are implementing SAP R/3, not plans to invest in another software.
Regards,
Sai Krishna

Hi Sai,
It's definate that the reuirement not get addressed in standard environment. Better way write a abap programe with workflow with user gropu or levels predefined and irrespective of status the group will be intimated or communicated.
Discuss with abap person who knows workflow very well.
I hope this will be helpful one.
Regards,
Ravindra

What is the easiest way to download a document from SAP DMS with C#?

Hi,
I've been sifting through this forum and looked at various posts and sample code, but so far my quest hasn't been fruitful.
What is the easiest way to download a physical document file from SAP DMS using C#? I'm using the NCo 3 (SAP .NET
Connector 3).
Requirements
- As few dependencies as possible (not adding or changing functionality in SAP)
- C# code (MS Visual Studio 2012)
- SAP Environment: NetWeaver 7.4.0
Thanks for all help.
Regards,
Frank

We've been using BAPI_DOCUMENT_CHECKOUT2, but there seems to be a limitation. From what I've found on Google, you must enable the use of the SAPGUI through the flag UseSAPGUI when connecting to SAP. It works, but my issue is that when I use it on a web server, I end up with some error when trying to start the GUI. There is very little recent information for this out there right now.

Confuguration of DMS using an external content server and KPRO

Hello all,
I am working in a new EH&S SAP environnement.
The aim is to configure a DMS to link EH&S with an external content server Documentum using Kpro.
I have done the following IMG activities:
- Specify Content Servers (Tcode: OAC0)
- Maintain Categories (Tcode: OACT)
- Specify links
- Specify Data Carriers
- Define document types
- Assign EH&S Document Types to Data Carriers
But i am facing to the following problems:
- CG36VEN: error: "could not create report for specification XX, variant XX and lang. EN.
- CG34: error: cannot display document MSDS
- CG4B: error: cannot display document TEST
Are there other actions to be done in the IMG activities?
Any idea to help me please?

More details:
I am working in a new EH&S SAP environnement.
I have installed a new DMS link witn an external documentum content server and he is working fine.
My aim is to configure EH&S to link SAP EH&S with my DMS.
Actually my connexion between EH&S and DMS is not working.
Can you tell me what are actions to be done to link EH&S to my DMS.
Thanks,
Ludovic Roux

Easy DMS - where does it store available systems list

Hello,
We have Easy DMS installed. If the client has a saplogon.ini file, this seems to be picked up in the list of Available Systems. If there is no other SAP software installed, systems can be input via the [.] button.
Does anyone know where this information is stored? I would like to investigate copying it between PC's. It does not seem to create a saplogon.ini
Thanks,
Philip.

It is stored in registry.
path: - HKEY_CURRENT_USER\Software\SAP\EasyDMS\RfcCache\AAA
where AAA is system name.
Hope this helps.
EasyDMS also reads the saplogon.ini file alonmg with this data.
Note:
If you are using SAp GUI 720 release you may have to use the environment variable posted in this thread for easydms to read the correct saplogon.ini file.

DMS and Content Server in ECC 6

Dear colleagues.
IN ECC 6 there is a internal BSP based content server, that allows store the document in the main SAP Database.
In case of great number of documnets. managed in DMS, can in impact performance of all ECC 6 applications.
Does it make sence to install separate 640 Content server, or maybe install pure NW 2004S server, which wil run inly content sever BSP on separate database?
Regards
Vladimir

I would always recommend the use of the SAP HTTP Content Server (640 content server). The database on the SAP server itself is impractical for anything other than a dev or qa environment.

DMS environment

Similar Messages

Maybe you are looking for