DNS Server - Access Denied

Good Day,
My Old DC crashed, I still have 2 GC servers I am now trying to add another DC, but when I try and setup the DNS role on one of the exsiting servers, I get access denied.
Any assistance would be appreciated.

Hi,
This might be due to a missing domain naming master server but I need more information about where exactly you see this error. Also please provide the full text of the error including any error codes.
If the domain naming master is missing, you can try to seize this role. First you should try to determine if and where it exists.
http://blogs.technet.com/b/mempson/archive/2007/11/08/how-to-find-out-who-has-your-fsmo-roles.aspx
http://technet.microsoft.com/en-us/library/cc738540.aspx
Thanks,
-Greg

Similar Messages

VI Server access denied

I am receiving "LabVIEW: VI Server access denied." from TestStand 2010. This is using LabVIEW 2011 on Windows 7 but only started happening after I had transitioned to using the Run-Time engine for a while.
I ran into this when trying to convert back to the development system for the configuration adapter due to needing to update some 130 steps worth of prototypes which takes a long time to do while running the run-time engine version.
Thanks

Thanks for the response Alexandra,
1) The project and VI both run perfectly fine on the same system from the development environment.
2) The LabVIEW module is a conglomeration of various instrument calls to accumulate some amount of data which is returned to Test Stand for Pass/Fail status and logging.
3) I can run the sequence with TestStand LabVIEW Adapter configured for the RunTime, setting the LabVIEW adapter to Development System is when the VI Server access denied appears.
4) System has always been a development system, I just switched the adapter over to RunTime engine to speed up operation of the test, now I am in integration with hardware and made a few changes that need to be updated in the sequence. I brute forced the update with runtime, but it took several hours to do for a 140+ step test.
5) The only additional toolkit for LabVIEW is the FPGA one I believe, everything else is standard LabVIEW Professional.
Thanks,
James

Clients can't save to the server, access denied no permissions, how to give permission?

I set up my school lab with an xserv 10.6.8. Everything was fine in terms of the users logging in to their respective groups. However, they weren't able to save anything to the server , they had access denied errors or you don't have permissions, even the keychain app was giving the users an error that said it couldn't save to reset to default values. Anyhow, I tried using the Server Admin application to propagate permissions, selected the hard drives and propagated permissions by clicking all the selections in the dialog. Now, the server wont start and only shows the grey Apple and the spinning gear, please help, I am so frustrated, I was so close to have this server running. All I want is to be able to have the students in my school log in to the server from the computer lab and save their work on the server. Simple service, I have running AFP, OD, DNS and SMB. I don't knowe if SMB is neccesary either.

Yes, I created the users using WGM home tab and then clicking on the create home now and then save. No, I didn't use terminal with the command, maybe that's one of the things I needed to do so that the problems with permissions wouldn't show. I used the secondary HD to create the sharepoint folder "Users" and that's the folder I used when creating the home directory for that specific part of the setup. My setup is pretty simple, I just want a Groups folder(sharepoint) where I can store the diffrent grades or classes that come to my lab and I have a "Users" folder(sharepoint) where the kids can use to login and save their work. Later, I may add another folder to place videos so that the folder can mount when they log in and all they have to do is go to the folder and double click on the video. Can you ellaborate more on how to use the command with terminal? Would the "a" be the name of the sharepoint? I created the folders using Server Admin, I believe that clicking on the sharepoint button, there is another button that says "new", would that be the correct way to do it? When I get back to school tomorrw I will post more specifics on the way that I setup the server and maybe it will give you a better picture of how I did it.
I really appreciate your assistance, I am trying to use the limited knowledge I have to setup this lab which will enable me to do a lot of things with the kids and make their lives easier, so they don't have to bring flash drives to save their work. Thanks again for your time!

Sql server Access denied

I am executing exec xp_cmdShell command to copy my backup file to another machine over network and getting Access Denied error. However from command prompt when I try dos command to copy, it does with no pain. The destination folder is shared and given full permission. Can any body help plz. I am doing a production server backup.
Is there any setting witin SQL server I got to make ?
Thanks in advance.

Does any body has any answer for me ??????

Access Denied DNS Server 'Windows Server 2008 R2 and Install AD (PDC) and ADD (BDC=Additional AD)

hi
I Have
Windows server 2008 R2 and Install Active Directory
Install and configuration for windows server 2008 PDC (Primary Domain Controller) and BDC (Additionall Domain Controller)
Error
A security Package specific Error Occurrred. would you like to add it anyway
and
Access Denied Console Other Domain AD
and Nslookup
C:\Users\admin>nslookup pdc
Server: bdc.*.*
Address: 10.0.X.X
Name: pdc.*.*
Addresses: 10.0.1.11
10.0.X.X

Hello,
your description is a bit confusing. You get the error message when you try to add the other DC to the DNS management console on one machine?
Both DCs belong to the same domain according to your description?
Please post an unedited ipconfig /all from both DC/DNS servers here.
BTW: PDC/BDC concept is gone since the start from AD with Windows 2000 Server. All DCs are the same, difference are only the FSMO roles, still that can be held from any DC in the domain according to some rules.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://msmvps.com/blogs/mweber/
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

Access Denied when trying to access shared folders on the server with administrative privileges

I have problem accessing shared folder on the server machine from Windows 7 machine even if I try to access it with administrative privileges (server Administrator account). I will try now to explain better my situation.
In my company, we have small network infrastructure with one main server machine (HP ProLiant server) with Windows Server 2012 R2 installed and couple of desktop machines. The network is administrated by me.
On Windows Server we have installed and setup DHCP, DNS, Remote Access and Routing, File and Storage and Active Directory services. Desktop machines are having Windows 8.1 Pro, Windows 8.1 or Windows 7 Home Premium installed on them. In Active
Directory I have created domain, User groups and Users for employees in my company and so far, I didn't added desktop machines to the domain.
Also, I've created one folder on the server which should contain different projects data for network users and I have set access permissions and security for this folder and shared it on the network (I've added couple of users to one user group and I
gave Full control to this group over this folder). When I try to access this folder from network, I've been asked for login credentials (normally), where I just type in one of users username and password who has been given access permissions to (who is member
of group with full control over the folder). From Windows 8.1 Pro and Windows 8.1 machines I can access and work on this folder without any problems.
The problem comes with Windows 7 machines. On Windows 7 machines (I have also tried this with Windows 7 Ultimate in VMWare) I can access server, I can see its shares, but as soon I try to access folder I've created for projects, I get Access Denied message
with request for User login credentials. Whichever user account I use (even servers main Administrator account) I keep getting this message over and over and I'm unable to access it at all.
I have also tried to access the server through VPN (from local or outside) but I'm getting the same error again. Also I've tried to add these Windows 7 machines to the domain and login with domain user but the result is the same. Turned off both firewalls
(on server and desktop machines, which I know is unnecessary, but lets try it), still same case. I've tried couple more things with registry editor on desktop machines which I found on different forums and websites but still no luck. And now I don't know
what else I can do.
Does anyone knows what's the problem here, have I set something wrong, have not set something I should?

Hi MeipoXu,
thanks for your response. I will first answer on your question.
Yes, the main issue is that we can see the folder when we access the server but we cannot access its contents from Windows 7 machines. I have tried on two machines, one with Windows 7 Home Premium version and the other one with Windows 7 Ultimate version
and the situation is the same.
As you recommended, I've checked Network Discovery and File and Printer Sharing and the situation is next: File and Printer Sharing is turned on all layers (Private, Public and Domain) while Network Discovery is off for all layers too. I don't know if this
is normal thing but Network Discovery cannot be turned on in Windows Server (I'm able to select Turn on Network Discovery and apply the changes, but when I get back to this settings page, I again see that it's turned off, so I assume this can't be changed
at all).
I also tried with icacls in command prompt and everything seems to be ok there regarding permissions. Share permissions are set to Full control to Everyone and Security permissions are set to Full control only for Administrators and the user group I've created
for employees in my company. The confirmation for this is that on Windows 8 machines you can access this folder without any problem and without getting any message connected with access permissions with any user account within this user group. This share is
created through File and Storage Services service in Server Manager panel.
And then something came up on my mind. I went in Server Manager to check shared folder settings in File and Storage Services and under Settings page I saw that "Encrypt data access" has been enabled (I enabled this option because I thought
I will get more security with this option). I asked my self what would happen if I disable it, tried it and now everything works ok on Windows 7 machines too. Now I assume that Windows 7 doesn't have this feature implemented or there are some
settings which needs to be set on Windows 7 machines to make this encryption thing work with Windows Server. So basically, I will let this feature off for now until I find out more about it and how to implement it to work with all operating systems.
I want to thank you once more for your kind help!

Access denied in Windows 2012 Server Manager after a period of time working without problems

Hello,
I had 2 servers with windows 2012 installed in a domain (dc is in a 3rd server) and both added to server manager of each other. Both servers had Failover cluster installed and configured roles. After startup in both servers i can see the other and manage
it without problems (in server manager and failover cluster manages) but after a period of 30-40 minutes in both servers I see "Online - Data Retrieval failures Ocurred" for the partner server and "Online - Access Denied" for local server.
When I access de Failure Cluster Manager I had errors accessing resources and roles and can´t failover the cluster.
I removed the failover cluster thinking that could be the original problem, remove servers from domain, change names and add again to the domain without install failover cluster.
Now, the servers have not the failover cluster feature and the problem persists. 30-40 minutes after boot the server manager show messages of inaccesible partner with same messages. I tried to execute powershell commands to add a new ip to the NIC and I
receive a Access Denied Message and show Access Denied message in other events in log.
I´m using Domain Administrator Account and tried different solutions but not solved. I saw that this message can occur in a variety of different scenarios, but i don´t know why works during a period of time before failing. It´s frustrating
Regards
EDITED: in detail of Online - Data retrieval failures i see that: Configuration refresh failed with the following error: The metadata failed to be retrieved from the server, due to the following error: The WS-Management service cannot process the request.
The WMI provider returned an 'access denied' error.

Hi PabloVDL,
It seems is this two server has register the incorrect DNS, please try to add this server manage NIC IP to your manager hosts file or if possible trmpory disable the useless NIC DNS register. This issue also some times caused by when you installed
the HP insignth management, if in your environment you have this tools please temporarily uninstall it.
More information:
Windows Server 2012 - Server Manager Troubleshooting Guide, Part III: Common
Events and Errors in Server Manager
http://social.technet.microsoft.com/wiki/contents/articles/13445.windows-server-2012-server-manager-troubleshooting-guide-part-iii-common-events-and-errors-in-server-manager.aspx
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Access Denied In windows 2008 Server R2

Hi team,
I ma trying to implemet a Lab setup to impelment 2008 AD/DNS/DHCP and work on SCCM 2007 deployment concepts. We have two 2008 R2 server adn one Win 7 mahcine all in Workgroup environment.
I tried to Promote one of the Server to DC. As the initial steps, i loaded the AD DS binary files in the mahcine and renmed the machine name to something accrording to DC standards. I did all this logged in with the defauld Administrator acct.
We rebooted the machine and i cant login with the dafualt Administrator acct anymore. I am gettin Access Denied.
I connected to the computer mgmt snapin remotely created a new user, added to administrators group,Remote desktop users group and can login with the newly created account. but not the Deafult Administrator acct. Have anyone come across similar issues. Please
letme know what could be the issue, since i have never faced this issue before :-( :-(
AppGN

Hiya,
It sounds like the following:
1: When you started working with your server you were using your local Administrator account, doing everything on the server.
2: When you promoted it to a DC, it no longer has a local Administrator account, but only a Domain Administrator account. You need to login using <Domain>\Administrator and not <ServerName>\Administrator. When you try to logon, it will have the
previously used local administrator account as the account.
3: When you remote connected you just wrote Administrator, which resolved to the domain administrator account, hence you were able to login and create the new account.
That would be my guess :)

Unable to send emails, get error message that access to server is denied...problem began a few days ago

For the past few days, since the Thunderbird update, I have been unable to send any emails from my thunderbird account. I have also tried going into my juno account online, and any emails that I send out come back with the mailer demon response - tha the email did not go through. With help from Juno I have tried to reconfigure my account, turn off my Anti-Virus and Firewall (Norton 360) changed my password many times, but nothing is working.
This is the error message that I receive...An error occurred while sending mail. The mail server responded: Access denied...4664b9656464c9c921b121b9b9c5354d11b420a93520358d357984a56d99d1cd24a07174e57559e0b1f00c7149f025b925ed4d45140c20f5.... Please check the message and try again.
In the past, I have received this message and was told by Juno to change my password. When I did that, I was again able to send out emails. But this time nothing has worked. I even tried a system restore to go back before the Thunderbird update, but that did not help either. I really need to use my email, and just can't imagine what has happened to it. I am not sure if this is a problem for Thunderbird or for Juno my email server. Please advise. thanks.

To diagnose problems with Thunderbird, try the following:
*Restart Thunderbird with add-ons disabled (Thunderbird Safe Mode). On the Help menu, click on "Restart with Add-ons Disabled". If Thunderbird works like normal, there is an Add-on or Theme interfering with normal operations. You will need to re-enable add-ons one at a time until you locate the offender.
*Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates.
Note that Norton's is notorious for not being "off" when their interface says they are. Safe mode with networking guarantees that.

"Access denied" when opening report on RAS Server

I'm sure I'm doing something wrong, but I've only been able to open a report using the rassdk protocol from the server where my java code is running.    This is fine, but I was hoping for efficiency sake that I could have reports reside on the RAS server itself.
My ras server definitely has a Crystal report called EBTest.rpt in the c:\temp directory. I run this code...
ReportClientDocument rcd = new ReportClientDocument();
rcd.setReportAppServer(ReportConstants.RAS_HOST);
rcd.open("c:\\temp\\EBTest.rpt", OpenReportOptions._openAsReadOnly);
rcd.close();
According to the JavaDoc, this should work, but I get this error ...
Caused by: com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException: Access denied. Please check directory setting for files you can access.---- Error code:-2147467259 Error code name:failed
     at com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException.throwReportSDKServerException(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.s.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.if(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.if(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ClientDocument.open(Unknown Source)
Am I missing something trivial?
Thanks,
Eric

Now that I've got it working, I expected that the RAS-local approach would be much faster than the RAS-remote, but I didn't find that to be the case in a quick test that I did. Is this what you'd expect? Or is there a different part of the ReportClientDocument interaction that would be more efficient.
From what I've seen, the ReportClientDocument construct and open() are one of the expensive aspects of the report rendering.
Enclosed are the results from a test I did:
--PERF--20 iteration test for 'Test local report initialization'
--PERF--WARMED UP in 3359 ms
--PERF--,Iterations          ,Total Time (mS)     ,Avg(ms)/Iteration   ,Transactions/sec
--PERF--,20                  ,35515               ,1775.75             ,0.5631423
--PERF--20 iteration test for 'Test remote report initialization'
--PERF--WARMED UP in 1828 ms
--PERF--,Iterations          ,Total Time (mS)     ,Avg(ms)/Iteration   ,Transactions/sec
--PERF--,20                  ,37109               ,1855.45             ,0.5389528
And here's the bulk of the code that generated those results...
int numIterations = 20;
PerformanceUtils.runPerformanceTest("Test local report initialization", numIterations, new Command(){
     public void execute() {
          try{
               ReportClientDocument rcd = new ReportClientDocument();
               rcd.setReportAppServer(ReportConstants.RAS_HOST);
               rcd.open("D:\\Program Files\\Business Objects\\BusinessObjects Enterprise 12.0\\Samples\\EN\\Reports\\triCalendarPeriod___-___Find___-___Months.rpt", OpenReportOptions._openAsReadOnly);
               rcd.close();
          }catch(Exception e){
               throw new RuntimeException(e);
PerformanceUtils.runPerformanceTest("Test remote report initialization", numIterations, new Command(){
     public void execute() {
          try{
               ReportClientDocument rcd = new ReportClientDocument();
               rcd.setReportAppServer(ReportConstants.RAS_HOST);
               rcd.open("rassdk://./test/data/crystal/triCalendarPeriod___-___Find___-___Months.rpt", OpenReportOptions._openAsReadOnly);
               rcd.close();
          }catch(Exception e){
               throw new RuntimeException(e);

Access Denied to report file on Windows Server 2003 Enterprise

Hi,
I have a deployment problem for which I am out of ideas. I have an ASP.NET web site deployed on a server running Windows Server 2003 R2, sp2. It makes extensive use of Crystal Reports, including both displaying them and e-mailing them to specified recipients as PDF files. It all works great.
Now I need to port the web site to a different server, running Windows Server 2003 Enterprise, sp1. The reports display fine as long as I am not trying to convert it to PDF for e-mailng. When it gets to the following line in my code:
MemoryStream memStream = (MemoryStream)rptDoc.ExportToStream(ExportFormatType.PortableDocFormat);
It reports the following error:
Access denied.Error in File JobDetails {DC64A5D3-9DD7-4E4C-90F5-A08731409B29}.rpt:
Access to report file denied. Another program may be using it.
I finally got it to work by granting Modify permission to Everyone for the c:\Windows\Temp folder. Obviously this is not a good practice. Granting Full Control to the IUSR_servername account did not solve the problem on Windows Server Enterprise, although it did the trick on R2.
So the question is, which account needs which permission to the Temp folder to enable the PDF to get written?
Thanks.
Dan

What ever account the app is running under will need read / write permissions on the temp folder. Your working server should be a good place to look to see how the premissions were set there. The same will apply to any other server(?).
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Error 550 5.7.0 Relay Access Denied in Server 2013 Enterprise

Good evening everyone.
When emails are sent from outside of our domain, to our domain; the following message is returned:
Delivery to the following recipient failed permanently:
email
Technical details of permanent failure
Google tried to deliver your message, but it was rejected by the server for the recipient domain by mail messaging microsoft
The error that the other server returned was:
550 5.7.0 Relay Access Denied
It is affecting all users.
I have scoured the net and tried many solutions. I have disabled both the anti-spam software and Symantec.
I am at a loss. I am willing to try a reconfigure that doesn't require an outside relay or try and fix this issue but the system has been down for the organization for too long.
Any advice is appreciated!
Thank you

Hi ,
1.On the exchange cas server please check the option anonymous users is checked on the receive connectors under permissions groups.
Connector name : Default front end connector
Note : Anonymous users needs to be checked on the above mentioned connector in all the cas servers to accept the anonymous connections coming from internet.
2.However please tell me ,For you exchange organisation where you have pointed your MX records ?
3.Did you done any recent change on the receive connectors ?
4.Please do the inbound email test from EXRCA tool and share me the results .
Thanks & Regards S.Nithyanandham

How to install printer in windows 7 from print server without downloading the driver access denied

Hi dears,<o:p></o:p>
i am trying
to install printer driver which is installed in win server 2003 into win 7, but
after connecting it says access denied, looks like the win 7 does not have a
power user to install the driver.<o:p></o:p>
now the IT
in charge do not want to change the GP in the domain (win 2008 R2) and he want
the printer driver to be installed without the it involvements.<o:p></o:p>
as i can
see only thru GP in the DC you can do this, am i correct??<o:p></o:p>

You are looking for this information
http://social.technet.microsoft.com/Forums/windowsserver/en-US/dc4fcf93-8268-44f4-822a-d463d9443f6c/windows-7-and-server-2003-printer-server-issues?forum=winserverprint
Alan Morris Windows Printing Team

Can't Create a Data Source - Failed to test connection. [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied

Hi there,
I am having a serious issue with The Power BI Data Management Gateway which I am hoping that someone can help me with.
Basically I am setting a connection between a Power BI demo site and a SQL 2012 Database based on Azure. The Data Management Gateway and is up and running, and Power BI has managed to connect to it successfuly.
By following the tutorials at
here I was able to successful create my Data Connection Gateway with a self-signed certificate.
However, when trying to create the data source I come into problems. The Data Source Manager manages to successfully resolve the hostname, as per the screenshot below:
Bear in mind that I exposed the require ports in Azure as endpoints and I managed to modify my hosts file on my local machine so I could access the SQL server hosted in Azure using its internal name -- otherwise I would not be able to get this far.
However the creation of the data source also fails when trying to created it whilst logged in the SQL server in question:
The Data Source Manager returns the error when using the Microsoft OLE DB Provider for SQL Server:
Failed to test connection. [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied
I tried using the SQL Server Native Client 11.0 instead but I also get an error. This time the error is:
Failed to test connection. Login timeout expiredA network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online.Named Pipes Provider: Could not open a connection to SQL Server [53].
Some considerations
If I provide an invalid username/password, the Data Source Manager does say that the username and password is incorrect.
Firewall is turned off in the SQL Server (either way, this error also happens if I try top use the Data Source Manager whilst logged in the SQL Server itself).
SQL Profiler does not show any attempt of connection.
The SQL server instance in question is the default one.
The error happens regardless if I select the option to encrypt connection or not.
In SQL Configuration manager I can see that all protocols are enabled (TCP/IP, Named Pipes and Shared Memory.
The Event Viewer does not provide any further errors than the one I have copied in this post.
I'm at a loss here. Could someone please advise what might I be doing wrong?
Regards,
P.

Here is what I had to do to solve this issue:
Basically I had to add the MSSQL TCP/IP port as an end-point in Azure. After I did that, then I was able to create the data-source. However, I was only able to authenticate with a SQL account, as any domain account would return me an error saying that the
domain isn't trusted.
What puzzles me here is how come the Data Source Manager would inform me that an account username/password was invalid, but it would fail/timeout if I provided valid credentials (!?!?!!?)

I cannot send mail. Been so for 2 days. Get the message: An error occurred while sending mail. The mail server responded: Access denied

When I send message the reply is "Access Denied" and a bunch of gobbly-gook ending with please re-check message. What would I check for? The G-G is of absolutely no value to the human species.
An error occurred while sending mail. The mail server responded: Access denied...3c61d9886161c1c1b119b169f84d0c00bd1d41014c8da58d391805d17cbcdccd89e9557dcc85058535d178217d0831cc6d65.... Please check the message and try again.
So what now. Mozilla must be the offspring of Microsoft in that help NEVER HELPS, EVER.

Hello,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you.

DNS Server - Access Denied

Similar Messages

Maybe you are looking for