Access Denied to report file on Windows Server 2003 Enterprise
Hi,
I have a deployment problem for which I am out of ideas. I have an ASP.NET web site deployed on a server running Windows Server 2003 R2, sp2. It makes extensive use of Crystal Reports, including both displaying them and e-mailing them to specified recipients as PDF files. It all works great.
Now I need to port the web site to a different server, running Windows Server 2003 Enterprise, sp1. The reports display fine as long as I am not trying to convert it to PDF for e-mailng. When it gets to the following line in my code:
MemoryStream memStream = (MemoryStream)rptDoc.ExportToStream(ExportFormatType.PortableDocFormat);
It reports the following error:
Access denied.Error in File JobDetails {DC64A5D3-9DD7-4E4C-90F5-A08731409B29}.rpt:
Access to report file denied. Another program may be using it.
I finally got it to work by granting Modify permission to Everyone for the c:\Windows\Temp folder. Obviously this is not a good practice. Granting Full Control to the IUSR_servername account did not solve the problem on Windows Server Enterprise, although it did the trick on R2.
So the question is, which account needs which permission to the Temp folder to enable the PDF to get written?
Thanks.
Dan
What ever account the app is running under will need read / write permissions on the temp folder. Your working server should be a good place to look to see how the premissions were set there. The same will apply to any other server(?).
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]
Similar Messages
-
Do I need the /3gb switch on Windows Server 2003 Enterprise Edition
I have an Oracle 10g database running on a Windows Server 2003 Enterprise Edition with 16gb of RAM. Do I need to set the /3gb and or /PAE switch in the boot.ini file for Oracle to use this memory?
This metalink doc talking pretty extensively about the setting
Implementing Address Windowing Extensions (AWE) or VLM on Windows Platforms
Doc ID: Note:225349.1
As you might know 32bit system has limitation of 4G max addressable memory issue. In Windows that's 2G limit because Windows reserve 2G for system. With /3G switch you can let Application address 3G with 1G for OS, if your system has more than 4G you need to use /PAE to address memory beyond 4G.
Of course if you don't plan to allocate more than 2G to Oracle SGA then don't need the settings. -
Failed Windows Server 2003 Enterprise SP2 to Windows 2008 Enterprise OS Upgrade
Attempted to upgrade the OS on our Primary Domain Controller which is running Windows Server 2003 Enterprise with Service Pack 2 installed on a HP ProLiant DL360 G4P Server with 2GB of ram, 3.2 GHz Processor and 53.2 GB of free space on C. I took
the following steps prior to attempting upgrade.
1. Determined that Server meet the minmum requirements for upgrade.
2. Installed all Windows Updates.
3. Uninstalled McAfee Virus Scan Enterprise Application
4. Backed Up and Imaged Primary Domain Controller.
5. Tested Domain Replication to ensure Primary and Backup Domain Controllers were communicating with each other.
6. Set Domain Function Level at Windows Server 2003
7. Placed ADPREP folder on C:\ on Primary Domain Controller and ran "adprep /forestprep" and "adprep /domainprep" successfully
8. In the C:\Windowd\System32 renamed the WindowsPowerShell application folder to WindowPowerShell-Old, the application failed the Upgrade compatibility test.
Loaded the DVD: "Windows Server 2008 for Enterprise, Standard and Datacenter 32bit Edition", ran installation in upgrade mode to preserve existing settings and software. The Ugrade ran to last step, application install and failed at
26% complete with the following errror message:
"Windows installation encountered an error and cannot continue. Your computer will now restart and your previous version of windows will be restored"
My questions are why did the upgrade fail? What can we do to ensure the upgrade will succeed next time?
I have incuded the Setuperr.log below.
2014-08-24 08:48:27, Error [0x08081e] MIG Failed to load manifest at C:\$WINDOWS.~BT\Sources\dlmanifests\errorreportingfaults-dl.man: class UnBCL::XmlException: hResult = 0x0, Line = 2, Position = 134;
void __thiscall UnBCL::XmlDocument::Load(class UnBCL::String *)
2014-08-24 08:48:30, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:30, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:30, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:48:35, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:35, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:35, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:48:35, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:35, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:35, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:48:35, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:35, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:35, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:48:58, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:58, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:58, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:48:58, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:58, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:58, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:48:58, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:58, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:58, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:48:58, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:58, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:58, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:48:59, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:59, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:59, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:48:59, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:59, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:59, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:48:59, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:59, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:59, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:48:59, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:48:59, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:48:59, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:49:09, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:49:09, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:49:09, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:49:09, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:49:09, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:49:09, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:49:09, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:49:09, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
failed gle=0x7f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
2014-08-24 08:49:09, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
0) failed, hr=[0x8007007f].
2014-08-24 08:49:18, Error [0x08071d] MIG CDownlevelOCStore::GetOCCollection, Failed to load C:\$WINDOWS.~BT\Sources\dlmanifests\errorreportingfaults-dl.man.: class UnBCL::XmlException: hResult = 0x0, Line
= 2, Position = 134; . .
void __thiscall UnBCL::XmlDocument::Load(class UnBCL::String *)
2014-08-24 08:49:22, Error [0x08081e] MIG Failed to load manifest at C:\$WINDOWS.~BT\Sources\dlmanifests\errorreportingfaults-dl.man: class UnBCL::XmlException: hResult = 0x0, Line = 2, Position = 134;
void __thiscall UnBCL::XmlDocument::Load(class UnBCL::String *)
2014-08-24 09:13:05, Error [0x080792] MIG COCEventTracing::COCEventTracing Failed to call StartTrace 87.[gle=0x00000057]
2014-08-24 09:14:26, Error [0x0802b6] MIG Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\AutoEnrollment [EventMessageFile]. Exception class Mig::Win32ErrorException: Win32ErrorException:
Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\AutoEnrollment [EventMessageFile]], which is protected by WRP..
void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
2014-08-24 09:14:26, Error [0x0802b6] MIG Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\AutoEnrollment [TypesSupported]. Exception class Mig::Win32ErrorException: Win32ErrorException:
Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\AutoEnrollment [TypesSupported]], which is protected by WRP..
void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
2014-08-24 09:14:27, Error [0x0802b6] MIG Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\Tlntsvr [EventMessageFile]. Exception class Mig::Win32ErrorException: Win32ErrorException:
Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\Tlntsvr [EventMessageFile]], which is protected by WRP..
void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
2014-08-24 09:14:27, Error [0x0802b6] MIG Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\DfsSvc [EventMessageFile]. Exception class Mig::Win32ErrorException: Win32ErrorException:
Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\DfsSvc [EventMessageFile]], which is protected by WRP..
void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
2014-08-24 09:14:27, Error [0x0802b6] MIG Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\DfsSvc [TypesSupported]. Exception class Mig::Win32ErrorException: Win32ErrorException:
Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\DfsSvc [TypesSupported]], which is protected by WRP..
void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
2014-08-24 09:14:27, Error [0x0802b6] MIG Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\SCardSvr [EventMessageFile]. Exception class Mig::Win32ErrorException: Win32ErrorException:
Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\SCardSvr [EventMessageFile]], which is protected by WRP..
void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
2014-08-24 09:14:27, Error [0x0802b6] MIG Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\SCardSvr [TypesSupported]. Exception class Mig::Win32ErrorException: Win32ErrorException:
Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\SCardSvr [TypesSupported]], which is protected by WRP..
void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
2014-08-24 09:30:13, Error [0x060005] IBS CallBack_StampRequiredDrives:An error occurred while fixing paths on black board GLE is [0x0]
2014-08-24 09:30:13, Error [0x064188] IBSLIB RollbackReinitialize: threw exception.: class UnBCL::ArgumentException: Directory "X:\$WINDOWS.~BT\Sources\Rollback" doesn't exists..
__thiscall OSRollbackService::CCheckpointImpressario::CCheckpointImpressario(const unsigned short *,class OSRollbackService::CCheckpointSequence *,int)
[gle=0x00000003]
2014-08-24 09:33:19, Error [0x0804b3] MIG CMigWorkingDirHelper::CMigWorkingDirHelper() failed.: class UnBCL::DirectoryNotFoundException: root of directory to create not found.
class UnBCL::DirectoryInfo *__stdcall UnBCL::Directory::CreateDir(const class UnBCL::String *)
[gle=0x00000003]
2014-08-24 09:33:19, Error [0x0802fa] MIG MigStartUp caught exception: class UnBCL::DirectoryNotFoundException: root of directory to create not found.
__thiscall Mig::CMigWorkingDirHelper::CMigWorkingDirHelper(class UnBCL::String *)
__thiscall Mig::CMigWorkingDirHelper::CMigWorkingDirHelper(class UnBCL::String *)
class UnBCL::DirectoryInfo *__stdcall UnBCL::Directory::CreateDir(const class UnBCL::String *)
[gle=0x00000003]Hi,
Here are some limitation of upgrading:
Upgrading is supported from x86-based and x64-based computers, but cross-architecture upgrades are not supported.
Cross-language upgrades are not supported.
Upgrading from Windows Server 2003 to a Server Core installation of Windows Server 2008 is not supported.
We cannot upgrade the failover clusters from Windows Server 2003 to Windows Server 2008. Before upgrading, we must uninstall failover clustering.
For detailed information about Upgrading to Windows Server 2008, please refer to the link below,
http://technet.microsoft.com/en-us/library/cc755199(v=WS.10).aspx#BKMK_Supported
Besides, to confirm that it isn't an IO issue, could you please try to copy the DVD to the local disk?
If error occurs, it may be an IO issue.
Best Regards.
Steven Lee
TechNet Community Support -
In my sharepoint 2007, I have upgraded the OS from windows server 2003 standard to windows server 2003 enterprise R2 SP2. After the OS upgrade when I run the central admin it's showing this error "Microsoft Windows Sharepoint Services 3.0 Error 2908
error has occurred" screen shot below of the error.
Any help?Not sure I can help. In general MS does NOT support the upgrade of the Underlying OS without re-installing SharePoint. Many of the prerequisites that were installed when SharePoint was installed are OS specific. You can either contact
Product Support and see if they can provide any assistance or re-install SharePoint from scratch and re-attach/migrate all the existing databases with content into the new system on the new OS.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem. -
Install Oracle 10g on Windows Server 2003 Enterprise Edition
I have a machine with the following specs:
Windows Server 2003 Enterprise Edition
16GB Memory
1.2TB Storage
I heard that Oracle has a limitation of 2GB Memory Allocation for Oracle Database. Can you post steps on how to acoomplish this task?mrp wrote:
I have a machine with the following specs:
Windows Server 2003 Enterprise Edition
16GB Memory
1.2TB Storage
I heard that Oracle has a limitation of 2GB Memory Allocation for Oracle Database. Can you post steps on how to acoomplish this task?Pray tell, where did you hear that? I'd encourage you find the source and ask for your money back - they give bad advice.
More relevant info can be found at http://www.oracle.com/pls/db102/portal.portal_db?selected=3 ... scroll down to 'Platform Guide' and select the appropriate guide - Windows 32 bit, Windows Itanium, or Windows 64 bit - that is relevant to your environment. For 32 bit, look at Chapter 1 and the sections
Oracle Database Scalability on Windows
* Support for Very Large Memory (VLM) Configurations
* Windows 4 GB RAM Tuning (4GT) -
Why Windows server 2003 enterprise edi is the recommended OS for Netweaver?
Hi All,
I am in a client discussion stage and the client is a huge enterprise going for SAP installation.
In order to implement SAP Netweaver 2004 S, the recommended OS is Windows Server 2003 Enterprise Edition?
I need to be equipped about the difference feature wise between Enterprise and Standard Edition.
Any kind of help is really appreciated.
It is a bit urgent.
So Tribe please come together and help me out.
Points will be rewarded for the timely help.
Thanks
Anilawhy not have a look yourself
-> http://technet.microsoft.com/en-us/windowsserver/bb294403.aspx
as you might see, the standard edition of win2k3 only supports up to 4 gb of ram, 4 cpus and it seems that there will be not 64bit edition...so, these might be some reasons, why sap recommends the enterprise edition
GreetZ, AH -
FMS on Microsoft Windows Server 2003, Enterprise Edition (64-bit)
Hi,
I am gotta buy Microsoft Windows Server 2003, Enterprise
Edition (64-bit) for my deployment of FMS 2.
As I read FMS 2 system requirement, it only support Microsoft
Windows Server 2003, Enterprise Edition (not mention 32 / 64-bit).
Does anyone got idea on this issue?
Thx a lot!
AlanAt this time, FMS is only officially supported on the 32 bit
version of Windows Server 2003. -
Transferring network user files from Windows Server 2003 to Mac OSX 10.5.8
I'm wondering if any network admins out there have a suggested method of transferring network user files from a Windows Server 2003 to an XServe running 10.5.8?
When we did the file transfer, clicking and dragging, there were a myriad permissions issues that subsequently arose. Surely there is a way to strip permissions off files PRIOR to the transfer?? Maybe not, but I'm wondering how you folks have done it.
We have had nothing but persistent permissions issues since the transfer (i.e. folks who should have access to files, being denied access, including the local server admin!!). This also translates to synch errors for network mobile accounts.
Thanks,
John Orban
System Administrator
The Country Schoolhttp://www.laurentnomine.com/2009/09/invalid-file-handle-when-copying-files-from -os-x-leopard-10-5-to-vista7/
-
Crystal Reports 9 and Windows Server 2003 sp1/sp2
Post Author: jnribeyrol
CA Forum: General
Hello,
due to security updates in my company, we have to upgrade from Windows Server 2003 to sp1 or sp2.
I haven't been able in the support to find out if there was any problem with Report Access Server on these SPs.
Can somebody help me.
regardsCR XI is past it's end of life. You can upgrade to CR XI R2 for free.
Go to: http://www.sdn.sap.com/irj/boc and download the trial version of CR XI R2 and use your XI keycode, then apply the patches which you can get to by clicking on the BusinessObjects tab above, then Downloads.
Typically this is due to DEP, search forums for more info on how to configure it as well as your Anti-virus and/or Firewall may be stopping CR from running. You also need full Admin rights to install all components.
Thank you
Don -
Cannot save files to Windows server 2003 file server from MAC
Hi,
We have few MAC users and others mostly windows based users. Problem now is MAC users cannot save any files to the file server. I had the issues to save in the portable hard drive then i format the HDD to fat 32 and now i can save, But the file server cannot
be done like that.
What i can do to save the files to file server? please advice me
thanks
saththiyanI cannot attach another NAS as CEO need to save files to all the folders which is there in the file server already,
You can share the folder and map a drive across the network to access the shared folder on the file server. Shared folders formatted NTFS do not affect network access. You would do that by using the SMB. Here's how:
How to Map Network Drive in Mac OS X
http://www.technipages.com/how-to-map-network-drive-in-mac-os-x.html
What OS version is the server? Is it a DC? You may need to reduce security on the server to allow Macs to access the server. Here's more info:
How to Disable SMB 2.0 on Windows Vista/2008/2008 R2
http://www.petri.co.il/how-to-disable-smb-2-on-windows-vista-or-server-2008.htm
"To disable SMB ... Otherwise, disable SMB signing on Windows Server 2003 domain controllers.
http://support.microsoft.com/kb/325379
How to enable Windows 98/ME/NT and MAC clients to logon to Windows 2003 based Domains
http://support.microsoft.com/default.aspx/kb/555038
Ace Fekay
MVP, MCT, MCITP/EA, MCTS Windows 2008/R2 & Exchange 2007, Exchange 2010 EA, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Technical Blogs & Videos: http://www.delawarecountycomputerconsulting.com/
This post is provided AS-IS with no warranties or guarantees and confers no rights. -
Problems with the shared files of Windows Server 2003 and Mac
I have some Mac computers in the domain of my LAN Network, and when I share a folder in Windows Server 2003 sometimes the Mac can not see and sometimes yes, but lasts a long time so that they can view folders. I have installed the protocol Apple Talk on the server and File Server and in the Domain Server.
The folders when users have no security users or groups are immediately with a connection AFP, but if they have not already created security can be displayed with a connection AFP, but if you can visualize a connection with SMB, but I can not work with Quark 6.0 Pro files.
What can I do to solve this problem.
AsalomonThe newer printers:
canon irc3100
canon ir5020-i have working on osx side, not in classic
Older printers:
hp laserjet 5m-2 of these
hp 2200
hp laserjet 5si-2 of these
hp laserjet 4100
These are installed on windows 2003 with mac print services running. I need to know what option i should use in osx when installing these network printers on these macs. When i go to printers folder, i chose windows printing then it prompts for the ppd file. I found it for the ir5020 but not the ir3100. I really need to test the hp laserjets in osx too. Ill post up when i test those. But that one canon (ir3100) is bothering me. They are roughly the same age and the drivers on the site don't seem to work. -
Running Forms and Reports 6i on Windows Server 2003
Hello,
Has anyone managed to get Forms and Reports 6i (running on 9iAS web) to run succesfully on Windows Server 2003? If so would you mind sharing what you needed to do to get it to work. I don't care about any of the other components of 9iAS other than forms and reports. Also is it possible to run on the 64bit version of this OS?
The problem I'm encountering (on the 64bit version of Windows) is that I can't get our webforms to launch any reports. The forms run just fine. I can run the report manually using rwrun60.exe and entering all the parameters by hand. BUT when I run the report from within the form a rwrun60.exe process starts and runs at full cpu. After a bit it dies but the form still continues to wait for it. The only way to get out is to close the browser and forcefully kill the form instance. If anyone has any ideas on what this could be any help is appreciated.
ThanksHi Jan,
I haven't tried to run Forms and Reports on Windows Server 2003, but I have worked on Windows XP and UNIX with F/R 6i 9i and 10g. I never had much luck with 9i Forms and Reports, 10g rel 1 was better, but 10g rel 2 is best. I recommend you bite the bullet and convert to 10g AS, Forms & Reports 10g rel 2. After running your 6i F/R to 10g through the converter, you may need to adjust fonts and colors.
Regarding your specific question, I am surprised that the rwrun60 works at all with 9i AS. And rwrun90 probably won't run the 6i version of your reports without recompiling in the 9 version.
Hope this helps,
Frank -
SOLARIS 10 & WINDOWS SERVER 2003 ENTERPRISE
Hi.
I have a Windows Server 2003 installed on my laptop and need to install a Solaris 10 as well .Is it possbile to have both on my laptop?If so ,I put the first CD when booting the system but nothing came up .It heppened also when I wanted to install Fedora CORE 4 on my laptop to have 2 different OS's.
Best Reagrdscheck your bios if the boot up priority options boots the CD first instead of the harddisk.
You should boot the CD ROM drive then the harddisk to detect any boot installation disc. -
WSUS - "this computer has not reported status yet" Windows server 2003
I just did a successful installation of wsus 3.0 Sp2
I am able to see all the machines but the issue starts there
Each of the machine show this error " this computer has not reported status yet"
i have tried but hasnt manage to resolve this issue
kindly guide me on how i can resolve it
thx2013-06-26 14:20:36:633
644 478
AU ## END ## AU: Search for updates [CallId = {4E48EF51-0D7C-458A-A575-9BA1B4799175}]
2013-06-26 14:20:36:633
644 478
AU #############
2013-06-26 14:20:36:634
644 478
AU Successfully wrote event for AU health state:0
2013-06-26 14:20:36:634
644 478
AU AU setting next detection timeout to 2013-06-26 16:20:36
2013-06-26 14:20:36:634
644 478
AU Setting AU scheduled install time to 2013-06-27 00:00:00
2013-06-26 14:20:36:634
644 478
AU Successfully wrote event for AU health state:0
2013-06-26 14:20:36:634
644 478
AU Successfully wrote event for AU health state:0
2013-06-26 14:20:41:581
644 1338
Report REPORT EVENT: {8DFBD635-02A8-4773-9DF8-80880752189A}
2013-06-26 14:20:36:577+0300 1
148 101
{D67661EB-2423-451D-BF5D-13199E37DF28}
1 800b0001
SelfUpdate Failure
Software Synchronization Windows Update Client failed to detect with error 0x800b0001.
2013-06-26 14:20:41:621
644 1338
Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2013-06-26 14:20:41:621
644 1338
Report WER Report sent: 7.6.7600.256 0x800b0001 D67661EB-2423-451D-BF5D-13199E37DF28 Scan 101 Managed
2013-06-26 14:20:41:621
644 1338
Report CWERReporter finishing event handling. (00000000)
2013-06-26 14:22:41:605
644 1338
Report Uploading 1 events using cached cookie, reporting URL = http://NTKE01/ReportingWebService/ReportingWebService.asmx
2013-06-26 14:22:41:612
644 1338
Report Reporter successfully uploaded 1 events.
2013-06-26 15:25:02:219
644 13d0
AU Triggering AU detection through DetectNow API
2013-06-26 15:25:02:219
644 13d0
AU Triggering Online detection (non-interactive)
2013-06-26 15:25:02:220
644 718
AU #############
2013-06-26 15:25:02:220
644 718
AU ## START ## AU: Search for updates
2013-06-26 15:25:02:220
644 718
AU #########
2013-06-26 15:25:02:221
644 718
AU <<## SUBMITTED ## AU: Search for updates [CallId = {65FA8DBB-1567-45A0-8ECB-103EFAB1C0A3}]
2013-06-26 15:25:02:221
644 179c
Agent *************
2013-06-26 15:25:02:221
644 179c
Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2013-06-26 15:25:02:221
644 179c
Agent *********
2013-06-26 15:25:02:221
644 179c
Agent * Online = Yes; Ignore download priority = No
2013-06-26 15:25:02:222
644 179c
Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0
and DeploymentAction='Uninstallation' and RebootRequired=1"
2013-06-26 15:25:02:222
644 179c
Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2013-06-26 15:25:02:222
644 179c
Agent * Search Scope = {Machine}
2013-06-26 15:25:02:242
644 179c
Setup Checking for agent SelfUpdate
2013-06-26 15:25:02:242
644 179c
Setup Client version: Core: 7.6.7600.256 Aux: 7.6.7600.256
2013-06-26 15:25:06:522
644 179c
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2013-06-26 15:25:06:530
644 179c
Misc Microsoft signed: Yes
2013-06-26 15:25:06:533
644 179c
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2013-06-26 15:25:06:558
644 179c
Misc Microsoft signed: Yes
2013-06-26 15:25:08:643
644 179c
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2013-06-26 15:25:08:647
644 179c
Misc Microsoft signed: Yes
2013-06-26 15:25:08:700
644 179c
Setup Determining whether a new setup handler needs to be downloaded
2013-06-26 15:25:08:700
644 179c
Setup SelfUpdate handler is not found. It will be downloaded
2013-06-26 15:25:08:700
644 179c
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.256"
2013-06-26 15:25:09:376
644 179c
Setup Setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2013-06-26 15:25:09:376
644 179c
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256"
2013-06-26 15:25:09:388
644 179c
Setup Setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2013-06-26 15:25:09:388
644 179c
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256"
2013-06-26 15:25:09:406
644 179c
Setup Setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2013-06-26 15:25:09:406
644 179c
Setup SelfUpdate check completed. SelfUpdate is NOT required.
2013-06-26 15:25:09:466
644 179c
PT +++++++++++ PT: Synchronizing server updates +++++++++++
2013-06-26 15:25:09:466
644 179c
PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://NTKE01/ClientWebService/client.asmx
2013-06-26 15:25:09:536
644 179c
PT WARNING: Cached cookie has expired or new PID is available
2013-06-26 15:25:09:536
644 179c
PT Initializing simple targeting cookie, clientId = 01f95362-b793-4a75-bc97-94e49f6b63aa, target group = , DNS name = pcke65.kenya
2013-06-26 15:25:09:536
644 179c
PT Server URL = http://NTKE01/SimpleAuthWebService/SimpleAuth.asmx
2013-06-26 15:25:17:456
644 179c
PT WARNING: GetCookie failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
2013-06-26 15:25:17:456
644 179c
PT WARNING: SOAP Fault: 0x00012c
2013-06-26 15:25:17:457
644 179c
PT WARNING: faultstring:Fault occurred
2013-06-26 15:25:17:457
644 179c
PT WARNING: ErrorCode:ConfigChanged(2)
2013-06-26 15:25:17:457
644 179c
PT WARNING: Message:(null)
2013-06-26 15:25:17:457
644 179c
PT WARNING: Method:"http://www.microsoft.com/SoftwareDistribution/Server/ClientWebService/GetCookie"
2013-06-26 15:25:17:457
644 179c
PT WARNING: ID:78fa31e8-8714-47b9-8ae3-182ecb2d9f74
2013-06-26 15:25:17:477
644 179c
PT WARNING: Cached cookie has expired or new PID is available
2013-06-26 15:25:17:477
644 179c
PT Initializing simple targeting cookie, clientId = 01f95362-b793-4a75-bc97-94e49f6b63aa, target group = , DNS name = pcke65.kenya
2013-06-26 15:25:17:477
644 179c
PT Server URL = http://NTKE01/SimpleAuthWebService/SimpleAuth.asmx
2013-06-26 15:27:50:499
644 718
AU AU received policy change subscription event
2013-06-26 15:31:23:807
644 13d0
AU Triggering AU detection through DetectNow API
2013-06-26 15:31:23:807
644 13d0
AU Piggybacking on an AU detection already in progress
2013-06-26 15:31:27:317
644 13d0
AU Triggering AU detection through DetectNow API
2013-06-26 15:31:27:317
644 13d0
AU Piggybacking on an AU detection already in progress
2013-06-26 15:36:56:942
644 179c
PT WARNING: SyncUpdates failure, error = 0x8024400A, soap client error = 10, soap error code = 0, HTTP status code = 200
2013-06-26 15:36:56:942
644 179c
PT WARNING: PTError: 0x8024400a
2013-06-26 15:36:56:942
644 179c
PT WARNING: SyncUpdates_WithRecovery failed.: 0x8024400a
2013-06-26 15:36:56:942
644 179c
PT WARNING: Sync of Updates: 0x8024400a
2013-06-26 15:36:56:942
644 179c
PT WARNING: SyncServerUpdatesInternal failed: 0x8024400a
2013-06-26 15:36:56:942
644 179c
Agent * WARNING: Failed to synchronize, error = 0x8024400A
2013-06-26 15:36:56:943
644 179c
Agent * WARNING: Exit code = 0x8024400A
2013-06-26 15:36:56:943
644 179c
Agent *********
2013-06-26 15:36:56:943
644 179c
Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2013-06-26 15:36:56:943
644 179c
Agent *************
2013-06-26 15:36:56:943
644 179c
Agent WARNING: WU client failed Searching for update with error 0x8024400a
2013-06-26 15:36:56:959
644 8dc
AU >>## RESUMED ## AU: Search for updates [CallId = {65FA8DBB-1567-45A0-8ECB-103EFAB1C0A3}]
2013-06-26 15:36:56:959
644 8dc
AU # WARNING: Search callback failed, result = 0x8024400A
2013-06-26 15:36:56:959
644 8dc
AU # WARNING: Failed to find updates with error code 8024400A
2013-06-26 15:36:56:959
644 8dc
AU #########
2013-06-26 15:36:56:959
644 8dc
AU ## END ## AU: Search for updates [CallId = {65FA8DBB-1567-45A0-8ECB-103EFAB1C0A3}]
2013-06-26 15:36:56:959
644 8dc
AU #############
2013-06-26 15:36:56:959
644 8dc
AU Successfully wrote event for AU health state:0
2013-06-26 15:36:56:959
644 8dc
AU AU setting next detection timeout to 2013-06-26 17:36:56
2013-06-26 15:36:56:959
644 8dc
AU Setting AU scheduled install time to 2013-06-27 00:00:00
2013-06-26 15:36:56:959
644 8dc
AU Successfully wrote event for AU health state:0
2013-06-26 15:36:56:960
644 8dc
AU Successfully wrote event for AU health state:0
2013-06-26 15:37:01:943
644 179c
Report REPORT EVENT: {48D1738E-F97A-45A4-8AB5-ECBE8FBDDF8F}
2013-06-26 15:36:56:943+0300 1
148 101
{00000000-0000-0000-0000-000000000000}
0 8024400a
AutomaticUpdates Failure
Software Synchronization Windows Update Client failed to detect with error 0x8024400a.
2013-06-26 15:37:01:950
644 179c
Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2013-06-26 15:37:01:950
644 179c
Report WER Report sent: 7.6.7600.256 0x8024400a 00000000-0000-0000-0000-000000000000 Scan 101 Managed
2013-06-26 15:37:01:951
644 179c
Report CWERReporter finishing event handling. (00000000)
2013-06-26 15:39:01:979
644 179c
PT WARNING: Cached cookie has expired or new PID is available
2013-06-26 15:39:01:979
644 179c
PT Initializing simple targeting cookie, clientId = 01f95362-b793-4a75-bc97-94e49f6b63aa, target group = , DNS name = pcke65.kenya
2013-06-26 15:39:01:979
644 179c
PT Server URL = http://NTKE01/SimpleAuthWebService/SimpleAuth.asmx
2013-06-26 15:39:02:302
644 179c
PT WARNING: GetCookie failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
2013-06-26 15:39:02:302
644 179c
PT WARNING: SOAP Fault: 0x00012c
2013-06-26 15:39:02:302
644 179c
PT WARNING: faultstring:Fault occurred
2013-06-26 15:39:02:302
644 179c
PT WARNING: ErrorCode:ConfigChanged(2)
2013-06-26 15:39:02:302
644 179c
PT WARNING: Message:(null)
2013-06-26 15:39:02:302
644 179c
PT WARNING: Method:"http://www.microsoft.com/SoftwareDistribution/Server/ClientWebService/GetCookie"
2013-06-26 15:39:02:302
644 179c
PT WARNING: ID:38d9b059-92f2-4248-9a71-be1e33841fcb
2013-06-26 15:39:02:311
644 179c
PT WARNING: Cached cookie has expired or new PID is available
2013-06-26 15:39:02:311
644 179c
PT Initializing simple targeting cookie, clientId = 01f95362-b793-4a75-bc97-94e49f6b63aa, target group = , DNS name = pcke65.kenya
2013-06-26 15:39:02:311
644 179c
PT Server URL =
AS you can see the log file is bigggggg..
pls advise -
Problem installing on Windows Server 2003 Enterprise Ed.
I have the following problem when i try to install Oracle Database 10g Express Ed R2 on Windows 2003 Server Enterprise Ed.:
Error Number: 0x80040707
Description: DLL function call crashed: GetHostnameDll.GetHostname
Setup will now terminate.
please help me, thanksMaybe it's a little late, but if it helps someone.
I have had the same problem and the cause was that the host name was too long.
I put a name shorter and the error has disappeared
Maybe you are looking for
-
11.5.10 Step by Step - Run istore from local machine for customization
Hello, Does anyone have step by step instructions on using JDeveloper to run iStore JSPs on local machine with the end goal to customize JSPs? We have 11.5.10. I am using JDeveloper 9.0.3.5. Have tried following steps per lot of metalink notes but no
-
PowerBook 17" window views do not stick.
For several years I've set window view from Finder > View to List view then went on to view option and chose set for all windows. It stuck. The I installed three pieces of software. Two I have since removed. PocketMac for a Blackberry 8330 Phone sold
-
IPhoto crashes after update using OS X 10.8
Using Mountain lion OS X 10.8. I recently updated to the new iPhoto 9.4 and after updating iPhoto to 9.4 it keeps crashing. I've read prior discussions and those answers seemed not to work. I pasted below the error message. Please help. Thank you!
-
Camera app problem after updating to 8.0.2
FFacing hanging up of the cameri app while opening through locked screen and even through normal way wwhat to do
-
JDeveloper 9.0.3.1035 does not use the path environment setting on windows 2000. I 'm using a few java classes that depend on dlls that are on the system's search path, when running my class from the command prompt with java the class will run. Runni