Do books ever disappear during the review process?

I uploaded several books and when I went to Manage Your Books it gave me the usual red dot.
Then a couple days later the books I just uploaded were GONE. No red dots.... no orange dots.... no green dots..... and no notifications, emails, or tickets.... Does this ever happen during the review process? Thank you for your time!

You posted this on another group. Its is not advisable to repeat your posts everywhere.. I gave you a suggestion to get an answer to your problem.

Similar Messages

Updating a Book During the Review Process

Does anyone have any advice/experience with updating a book while it is still in the review process?
I have a book currently being reviewed, but just realized that one of the images in there is reversed. I also heard from a source that needs to change a citation in our back-of-book appendix. Both are not huge deals, and I could just wait to update after the book is successfully in the iTunes store.
However, if I did update the book now, would that screw up the review process? Not sure what happens if Apple is reviewing a book, and another version of the book is uploaded during the process.

Apparently, if you push an update, the book in the store is taken off sale until the process is wrapped up...
If you replace an asset under review, the process has to come to a halt, pick up the new content and start again. How that affects the queue could depend on if the review is being done by the same person and how busy their queue is, etc.
See Once my book is uploaded, how long before it appears in iTunes?

My computer freezes up when trying to upload photo book from iPhoto '11. This happens during the upload process.

My computer freezes up when trying to upload photo book from iPhoto '11. This happens during the upload process.
When this happens I need to close down the computer and restart.
Any ideas ?
I've got Mountain Lion running.
I'm on a 13" white MacBook with 8GB RAM installed.
I recently had a 1 TB hard disc installed at the Apple store.

can you preview it? -
Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
If that works fine and you still have problems boot into safe mode and try again
LN

Problem: An error occured during the uploading process.

Hello! I've searched around but I am having difficulty finding a solution to this problem.
I am trying to upload videos through Adobe Premiere Elements 9 to YouTube, using the preset options in the share tab. This worked previously without issue, but then one day I continually ran into an error stating "Sorry, an error occured during the uploading process. Please try again later." However, it eventually started working. It is now a few weeks later, and I am having the very same issue. I am unable to upload to YouTube or any other service through the Share tab. Even loading the software itself, the opening splash screen is unable to grab my Adobe ID. It never stops "Gathering User Info..."
Steps I have tried:
Going to Edit -> Preferences -> Web Sharing and hitting the refresh button to update settings.
Checked router settings.
Enabled DMZ on router and linked it to this specific computer.
Rebooted PC and router, and tried updating the Web Sharing settings multiple times.
I honestly do not believe it to be a router issue, especially since it is currently in DMZ mode and I have had absolutely no trouble with any other software. This has continued to baffle me though, and finding help is difficult. Searches keep giving me encoding settings for YouTube videos, and few results pertain to this particular issue.
I am aware I could export the video normally and upload through YouTube that way, but on DSL, my upload speed is pretty terrible for a high quality video. The YouTube HD setting has been great for me in the past, as files are small but still look great online. I would really like to get it working again, both for ease and convenience for simple projects.
If anyone has any ideas as to what could be causing a problem, I would be greatly appreciative of any advice. In regards to the project itself, there is no real editing being done at this point, as I am trying to eliminate any possibility of error elsewhere. I opened a new project, added a video clip and went directly to upload it, resulting in the error above.
I don't believe it matters in this situation, but just in case:
Windows 7
AMD Phenom II X4 820 - 2.80 GHz
6 GB RAM
Radeon HD 5880 1GB
Connecting through a Netgear WNDR3400 router, standard DSL connection.

Sorry, not seeing where to edit my original post.
Just wanted to add, that I am able to visit both the Photoshop.com website, as well as YouTube through my browser. So I am not being blocked somehow to those particular sites. It only seems to be through the software that I cannot connect to any of the online services to upload videos to.
Additionally, the only virus software running is Microsoft Security Essentials. It has never raised a flag before with this software or caused interference in the past. I do not use Norton or any other service which are known to interfere with programs often.
Just a quick example as well, pinging Photoshop.com through the command prompt shows I am getting through just fine. As you can see in this image though, it cannot seem to ever connect and grab my user information.
http://i.imgur.com/S53xN.png

Apple seriously needs to fix the review process

I know this has been discussed ad nauseam but I'm really frustrated about how reviews are handled by Apple.
I mean, what gives? Are they treating us like dirt because A) they don't care because devs are rushing to the iPhone platform or B) they are overwhelmed by submissions?
One of my apps has been in review for over 2 weeks (I know... some have been over a month so why am I complaining?) and there's no way to know when it's made available (if ever... Apple criteria's seem to change from day to day). 1 hour? 1 day? 1 week? 1 month? Who knows!
Every day my app stays "In Review", I'm losing money from potential sales. It would be nice to get at least an estimate of when your app will be reviewed. Or, at least Apple could tell us a bit more about the review process so we understand how it works and don't panic when apps don't get reviewed before several weeks.
It's sad because the iPhone platform is just terrific but what I dislike is the fact that once you send your app for review, you lose control over it. The App Store does have it's advantages, but I think it's getting sour and while launching a desktop app might be more demanding money-wize and marketing-wize, at least you keep control of your distribution and you can release your product when you see fit, at not have it standing in review forever without knowing when you'll see a return on your investment.
The lact of information is very unfortunate and I just hope that the answer to my first question in B).

Does anyone have a phone number to call? Hard to believe paying developers have nobody to call.
I don't mind waiting, but I sure as **** want to know if there is something in my app that they are waiting on ME for.
It wouldn't kill them to have each guy in the review phase check a single box to say what he has reviewed and then notify you by email.
Has anyone reading this been able to talk to anybody at Apple, just to make sure that they aren't waiting for something to be added to the upload or fixed in the binary?
I submitted 2 apps - the one on the 24th sailed through and has sold 150 copies.
The one on the 26th is still sitting in review.

How do I solve this Nano 3G syncing problem? During the syncing process my music files are registering as audio, but once I eject the IPOD it does not reveal the music files in the music folder.

During the syncing process my IPOD Nano 3G shows that the music files that I'm synching are registering as audio, and that the video files are registering as video, and even upon completion they are still labeled as such. But, when I eject the device from ITUNES and turn it on, the IPOD reveals that there are no music or video files to be played. When I plug the device back into my MAC and, when ITUNES recognizes the device, uder the summary tab the summary bar reads that the files that I loaded are all classified as other files. What could be causing this? I had to re-install my Tiger Software, and since then I've been having this problem.

was this ever addressed

Batch Traceability for Sugar as raw material during the production process

Dear Colleague ,
I need your support for a traceability issue in a customer on beverage sector
See the case below:
Batch Traceability for Sugar as raw material during the production process
In AMSB the batch traceability in some production processes is very difficult, especially in case of sugar where tanks wherein more than one batches of the same material can be mixed. For example, in a single day almost 17-20 batches of the same material can be mixed and as the result is a composition of water and sugar the normal FIFO rule strategy cannot be applied during the component consumption.
The raw material (sugar) is received in tank S5 at different points of time, and its content is transferred to tank B1 for storage purposes as well as for mix the sugar with other material such as water.
At a specific moment the S5 tank contains only a single batch, while the tank B1 contains more than one batch. Tank B1 is used in order to supply the production line and the corresponding material consumption is triggered in backflush as soon as the production activity is declared (production confirmation). Along with the material consumption the batch determination takes place and a complex algorithm is applied: at a very high level, the single batch is consumed depending on its percentage inside the mix of composition and in case the this
percentage is under a threshold level the current batch should be full used in order to avoid that it will exist for ever.
Moreover, the good movement reversal (reversal of material consumption) and its correction lead to a complete new calculation of all the batches consumed after the original movement date/time. This means that the algorithm for batch determination should be reapplied for all the consumptions subsequent to the original movement.
On the other hand it’s not possible to identify the mix of batches at the exit point of silos B1 because the total consumption of the material in the tank will never happen. As long as the tank level decreases it will be filled up from the tank used for receiving of sugar (S5).
As requirement AMSB needs to post the material consumption starting from EWM, this means that EWM should be the master system in this case and the correspondingmovements have to be transferred to ECC afterwards. This mainly because EWM should guarantee the business continuity in case the ERP system is not available.
AMSB asked if the scenario depicted has been implemented in some customer, in EWM system or in any other SAP solution.

Hi ,
At the time of consumption you can put ' * ' aestrix sign in the batch field.
You will get list of batches of that material.select ur batch and consume the quantity.
Regards
Piyush

"Errors found during the burning process"

Hello,
I created an iDVD project that includes:
1. 108-minute movie
2. 6-minute movie
3. 3-minute movie
4. 12-minute slide show (3 four-minute slide shows)
The project worked fine in the iDVD Preview. I then attempted to burn the DVD right from iDVD, and after 8 hours of encoding, I got the "Errors found during the burning process" message.
I've read so many posts here with a hundred different possible solutions, but what is the best place to start to try to determine what the errors are and how to fix them?
Following one suggestion, I am now creating a Disk Image first, but if errors still exist with a Disk Image, what do I do then?
I'm working on a Powerbook G4 with the iLife upgrade. Thanks for any advice.
Larry

Larry,
Here's my philosophy on iDVD troubleshooting, largley based upon my experience here at this forum, with heavy doeses of input from Ken Tidwell, Len Goff, Old Toad, F Shippey, with more recent input from SDIllini, Hui Cheng, and Beverly M.......
#0 - always use "Save as Disk Image" instead of burning when troubleshooting iDVD
#1 Try the easy usual suspect fixes first! After all if these don't work you can always try the hard fixes!
Check the list on this download:
http://dvd.kentidwell.com/iDVDUOFAQ2005.pdf
But here are easy solutions IMHO:
Get free space on the startup drive -20GB recommended
Delete the iDVD plist file com.apple.iDVD.plist
Repair Disk Permissions
Clear Cache Files (CacheOutX, TigerCacheCleaner, Onyx)
Do you have 12 bit audio - check your camcorder.......if not 16 bit you will have problems
Fix Chapter Markers-don't put one at the beginning in iMovie (iDVD will do it for you)
Chapter Markers - don't put one at the end.
Chapter Markers - don't put one within 2 secs of a transition
Delete other corrupt preference files (try using Preferential Treatment)
#2 When the easy fixes don't work, you need to divide and conquer. The suspects are your a) your project media, b)your hardware, c)your system/user preferences, d)iDVD.
A good test for a&d is to build a simple test project with other photos/movies/themes/audio and see if you can "save as disk image" the test project. The iDVD4 tutorial project is great if you've ever had iDVD4 installed on your machine. If this works it suggests that iDVD is working OK, and that something in your project is causing the hiccup.
The most common problems in projects are CMs, audio and transitions. One way that sometimes clears them up is to export to full quality DV (or to tape!) and re-import into iDVD. In slideshows, funny JPEGs can bring iDVD down. The only method here is to try different groups to find the bad actor.
OK let's assume that you can't burn (I mean "Save as Disk Image") the test project or the tutorial. This suggest that your hardware/system/iDVD is having problems and your project is probably fine. Then what?
c) Hardware: if you can make a disk image but can't burn it, or it plays badly, then try creating a data DVD - if you can't do that I'd suspect your DVD drive. Try different brands of DVD-R (and I'd stick to -R, not +R nor +RW), I like Verbatim. Next on the suspect list is RAM. iDVD is the best test for RAM known to mackind. Try pulling non-Apple supplied modules and try again.
OK, let's assume you can make data DVDs, but you can't make a good disk image, and you've tried pulling all non-Apple RAM. What next?
Try creating a new user. New users have more limited sets of fonts and all new preference files and caches, not only for iDVD but for everything, and few (if any) third party plug-ins installed.
Finally try reinstalling iDVD.......
If you've done all this, a new system install might be in order, but come here first for advice from others before going that far!
john b

[svn:fx-trunk] 11546: fix so the textLayout. swc does not get modified during the build process.

Revision: 11546
Author:   [email protected]
Date:     2009-11-06 15:42:05 -0800 (Fri, 06 Nov 2009)
Log Message:
fix so the textLayout.swc does not get modified during the build process.
QE notes: no
Doc notes: no
Bugs: no
Reviewer:
Tests run: checkintests
Is noteworthy for integration: no
Modified Paths:
    flex/sdk/trunk/build.xml

Printers deployed by Group Policy Preferences disappeared during GP refresh processing

I am testing deployment of print queues using GP preference. All clients are Win 7. Replace mode is used so that the print queues can be updated if they are renamed on server side. Also set to remove the printers when GP is out of scope. I found that all
the printers disappeared during GP refresh processing which happens every 90 to 120 mins by default. Then repopulated. As most of them are utilizing HP universal print driver so the repopulation usually take 5 to 10 minutes to complete.
To stop the refresh I attempt to set maxnogpolistchangesinterval registry value in HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\GPExtensions\{BC75B1ED-5833-4858-9BB8-CBF0B166DF9D} to 960 (16 hours). As users shutdown computer
daily so this should eliminate the refresh processing on printers. But the reg key can be writted only by SYSTEM. Administrators have read access only. Looks like anything under the key should not be modified.
Is there something I can set so that printer processing happens only during computer startup?

HelloForest,
To achieve the requirement, you can try the following solutions:
1. Create
a startup script to deploy the registry value;
How Can I Use the RunAs Command to Run a Script Under Alternate User Credentials?
http://blogs.technet.com/b/heyscriptingguy/archive/2006/04/28/how-can-i-use-the-runas-command-to-run-a-script-under-alternate-user-credentials.aspx
2. Create
a custom .adm to deploy the registry value;
Writing Custom ADM Files for System Policy Editor
http://support.microsoft.com/kb/225087
Brent Hu,
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer
your question. This can be beneficial to other community members reading the thread. ”

After upgrading to 27, firefox will not start. Saw an error message during the upgrade process.

After upgrading to 27, firefox will not start. Saw an error message during the upgrade process but cannot remember.
Tried to run firefox.exe -P but receive error message:
XML Parsing error: undefined entity
Location: chrome://mozapps/content/profile/profileSelection.xul
Line number 18, Column 1:
<dialog
^
Running on Windows XP SP3. No problem whatsoever before upgrading to 27. Sending this from Chrome as I cannot open Firefox at all.

Thanks jschaer2000: after starting it once in safe mode, I closed Mozilla and tried several restarts in normal mode. So far, all worked:-)
Thank you very much again.
Still the automatic update process bothers me: it took me several days to discover the reason to the malfunction, since when I removed the problematic version from Add and Remove Programs, I didn't pay attention at first that it was another version, not v26 which I installed from my folder.
In addition, I like to save the installation files before I run new programs and if I didn't have v26 exe file, I couldn't have operated Mozilla at all. Not that it was fun to remove and install again each time v27 didn't react, but it was better than nothing, I still prefer Mozilla over its competition.

There is always a blue screen appears after the Apple logo during the booting process. And then everything is back to normal. What is this thing? Is there something wrong with my screen or something?

There is always a blue screen appears after the Apple logo during the booting process. And then everything is back to normal. What is this thing? Is there something wrong with my screen or something?

Nah - that's just the normal boot process.
Clinton

What is the keyboard shortcut to lighten images during the editing process?

What is the keyboard shortcut to lighten images during the editing process?

I have no idea what you mean. You need to explain better.
Mylenium

HT201413 I keep error 9 when i try to restore my Ipod 5.It seems to be that my device disconnects during the restore process, then error messege pops up. I have updated the security settings on my pc and it still doesn't work.

Error 9 pops up when trying to restore Ipod 5. The problem seems to be that my ipod disconnects during the restore process. My ipod is stuck in restore mode so I can't access its update serever. I have already updated my pc and its security settings. Is there anything else i can try?

Hello AS234,
This error is typically indicative of a conflict with installed security software.
Configure your security software
Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.
Common errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/TS3694
Cheers,
Allen

Application error occurred during the request procession.

Hi all
i am geeting this error when i am ruuning my JSP page through NWDS.
Application error occurred during the request procession.
Details: com.sap.engine.services.servlets_jsp.server.exceptions.WebIOException:
Error compiling [/InvokeProxy.jsp] of alias [ProxySenderWeb] of J2EE application [sap.com/Refrence].
Exception id: [001279D06B4E00C6000027C700002DFC000445047AAE5AD8]
Thanks in advance

Dear Kunnal,
Please share your solution with the community.
Thank you.

Do books ever disappear during the review process?

Similar Messages

Maybe you are looking for