Do games etc actually work properly on the MBP with boot camp?

I have heard alot about Boot camp being excellent for windows but does it actually run games smoothly, for example I play Flight sim 2004 on my Pc at home, how would this rate on th MBP, or even a game like Battlefield 2 etc?

Well....being my first Mac (& me being a switcher, also), I can say that I like what I've encountered. I literally stay in OSX for everything except gaming. I like the Mail interface -- it is so much simpler than Outlook. I like the integration of the iLife suite of products. I like the look & feel of the machine; the back-lit keyboard is most impressive.
As far as advice -- be open to changes. Mac folks tend not to concern themselves w/ the minutia of computing the way we Win-geeks have for years (sorry about the generalization, but this is what I've noticed in my measely Mac experience). I think this is simply b/c the Mac "just tends to work." If one does not want to concern oneself over minutia (re: the Mac), that is completely possible. For a Win-geek, it really isn't. Make sure you partition (choose the right size) correctly, since doing it over again is a bit of a pain. Finally, ask lots of questions. I am by no means competent w/ OSX yet....but I am comfortable. There are some good reads out there on optimizing the OSX environment (& plenty of websites).
And, of course, in the greats words of Douglas Adams, don't panic. Pour yourself a pint (of 1759, of course!) & enjoy.

Similar Messages

  • I can't access the internet with boot camp -- windows 7

    Just bought the computer yesterday (15 inch mac book pro) and installed windows 7 with boot camp.  I have a wireless network with a comcast modem and apple ariport extremes.  The macs (including the new mac book pro when not running windows) and a different windows computer can reach the internet fine using the wireless network.  When I run windows through boot camp it can't find the network.  Any help would be greatly appreciated!

    Glad it has a simple cure

  • I have installed windows 7 on my macbook but i didn't partition the disk with boot camp, now boot camp doesn't recognize my windows. Any solution because i need to have my MacBook drivers on the Windows 7 ?

    Regards,

    Start again this time read and follow the Bootcamp help and installation manuals, http://www.apple.com/support/bootcamp/. Use Bootcamp Assistant to create a Bootcamp partition and download the Windows support software.

  • Why the games are not working properly in my ipad after installing iOS7

    Why games are not working properly in my ipad in my iOS 7

    The games you mention would have been written and therefore designed for the previous version of iOS - you've most likely had a lot of updates lately in the run-up to the release of iOS 7 and if these games haven't had an update then chances are these will need to be adapted to iOS 7 by the developers if not working correctly.
    Regards,
    Steve

  • HT4061 actually i bought iphone 4s in nov 2012 and now its not working properly as the screen goes black ....i lost  the bill..is it possible to get another copy of the bill......

    actually i bought iphone 4s in nov 2012 and now its not working properly and i lost my bill as well i want to request to get a copy of bill pls.....

    You are not addressing Apple here. This is a user to user technical support forum. If you are having warranty issues with the phone, a copy of the bill is not necessary for Apple to check and evaluate the phone. If there is a manufacturer defect, they will deal with it.
    What is "not working properly" on the phone. Maybe someone can help and it not be necessasry to be replaced.

  • Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applica

    Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applications.

    I received no error message. The application was just trying to find applications unsuccessfully.
    I am using MAC OS 10.10.1
    I tried to uninstall the application  but it seems that a kind of deamon is still installed thus providing me to reinstall properly. Do you know where are the elements to remove in order to get my machine just like before ?
    Otherwise I would have to reinstall everything and this would be a pain.
    Thanks for your help.

  • My IPOD classic headport is not working properly.  The sound is going in and out?

    My ipod classic headport is not working properly.  The sound keeps going in and out.  I have tried changing headphones and checking the settings.  Does anyone have any ideas?

    Do a Hard Reset
    After charging till full charge, at least 2 hours (preferably 4 hours)
    Toggle the Hold switch, make sure you dont see the red mark when you do the  next step
    Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
    Then release the buttons
    Select your preferred language.
    Here is the Apple support Article on the 5Rs
    http://www.apple.com/support/ipod/five_rs/classic/
    If the sound is still the same, but ok, coming from the bottom Dock connector, then try cleaning the headport, using a jet of air or some electronic cleaner.

  • My trackpad in Macbook is not working properly. The tap and double tap is not working but other gestures are working. Please help me..thanks

    My trackpad in Macbook is not working properly. The tap and double tap is not working but other gestures are working. Please help me..thanks

    Portables and Magic Trackpad: Jumpy or erratic trackpad operation
    Might be something from that link that will help.

  • Help! My Mouse pad is not working properly. The arrow cannot be controlled, it just keeps jumping all over the page. How can I stop this?

    Help! My Mouse pad is not working properly. The arrow cannot be controlled, it just keeps jumping all over the page. How can I stop this?

    There are several possible causes for this issue. Please take each of the following steps that you haven't already tried until it's resolved. Some may not apply in your case.
    1. Follow the instructions in this support article, and also this one, if applicable. A damaged or defective AC adapter could be the cause, even if it's the right kind.
    2. Press down all four corners of the trackpad at once and release. If there's any effect, it's likely to be temporary, and in that case the unit must be serviced or replaced.
    3. Open the Bluetooth preference pane in System Preferences and delete all pointing devices other than the trackpad, if applicable. Disconnect any USB pointing devices. By a "pointing device," I mean a peripheral that moves the cursor, such as a trackpad, mouse, trackball, or graphics tablet. A plain keyboard is not a pointing device.
    4. Start up in safe mode and test, preferably without launching any third-party applications. If you don't have the problem in safe mode, but it comes back when you restart as usual, stop here and post your results. Do the same if you can't start in safe mode. If there was no difference in safe mode, go on to the next step.
    5. Reset the System Management Controller.
    6. If you're using a Bluetooth trackpad, investigate potential sources of interference, including USB 3 devices.
    7. A swollen battery in a portable computer can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced without delay.
    8. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built-in trackpad of a MacBook to  behave erratically. If you're using such an adapter, disconnect it and test.
    9. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
    10. If none of the above applies, or if you have another reason to think that your computer is being remotely controlled, remove it from the network by turning off Wi-Fi (or your Wi-Fi access point), disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop at once, you should suspect an intrusion.
    11. Make a "Genius" appointment at an Apple Store to have the machine and/or external trackpad tested.

  • [svn:fx-trunk] 13157: -revert a portion of my previous change so that asdoc will work properly - moved the proprietary automation swcs back into the libs directory .

    Revision: 13157
    Revision: 13157
    Author:   [email protected]
    Date:     2009-12-22 10:15:18 -0800 (Tue, 22 Dec 2009)
    Log Message:
    -revert a portion of my previous change so that asdoc will work properly - moved the proprietary automation swcs back into the libs directory.  the automation projects swcs will still get compiled into the automation directory.
    This should fix the build
    QE notes: make sure packaging is correct
    Doc notes: no
    Bugs: no
    Reviewer:no
    Tests run: checkintests, doc targets run
    Is noteworthy for integration: no
    Modified Paths:
        flex/sdk/trunk/build.xml
        flex/sdk/trunk/frameworks/projects/automation/build.xml
        flex/sdk/trunk/frameworks/projects/automation_air/build.xml
        flex/sdk/trunk/frameworks/projects/automation_dmv/build.xml
        flex/sdk/trunk/frameworks/projects/automation_flashflexkit/build.xml
        flex/sdk/trunk/frameworks/projects/automation_spark/build.xml
    Added Paths:
        flex/sdk/trunk/frameworks/libs/automation_agent.swc
        flex/sdk/trunk/frameworks/libs/qtp.swc
        flex/sdk/trunk/frameworks/libs/qtp_air.swc
    Removed Paths:
        flex/sdk/trunk/frameworks/libs/automation/

    Revision: 13157
    Revision: 13157
    Author:   [email protected]
    Date:     2009-12-22 10:15:18 -0800 (Tue, 22 Dec 2009)
    Log Message:
    -revert a portion of my previous change so that asdoc will work properly - moved the proprietary automation swcs back into the libs directory.  the automation projects swcs will still get compiled into the automation directory.
    This should fix the build
    QE notes: make sure packaging is correct
    Doc notes: no
    Bugs: no
    Reviewer:no
    Tests run: checkintests, doc targets run
    Is noteworthy for integration: no
    Modified Paths:
        flex/sdk/trunk/build.xml
        flex/sdk/trunk/frameworks/projects/automation/build.xml
        flex/sdk/trunk/frameworks/projects/automation_air/build.xml
        flex/sdk/trunk/frameworks/projects/automation_dmv/build.xml
        flex/sdk/trunk/frameworks/projects/automation_flashflexkit/build.xml
        flex/sdk/trunk/frameworks/projects/automation_spark/build.xml
    Added Paths:
        flex/sdk/trunk/frameworks/libs/automation_agent.swc
        flex/sdk/trunk/frameworks/libs/qtp.swc
        flex/sdk/trunk/frameworks/libs/qtp_air.swc
    Removed Paths:
        flex/sdk/trunk/frameworks/libs/automation/

  • I am running Windows XP, SP3. I have tried to run Firefox 4 several times but it doesn't work properly. The main page comes up showing the logo, below that is the search box, and below that is another box with nothing in it.

    I am running Windows XP, SP3. I have tried to run Firefox 4 several times but it doesn't work properly. The main page comes up showing the logo, below that is the search box, and below that is another box with nothing in it.

    The external DVD/CD Writer will Not appear on your desktop when you attach it to your iMac.  It will appear in "Finder", which is in your Dock.
    Hope this helps

  • The paint bucket tool is not working properly. The colors does not change, any suggestion?

    The paint bucket tool is not working properly. The colors does not change, any suggestion?

    Maybe on the wrong layer.
    It would be more beneficial if you capture your screen with the layers panel open and any layers that are collapsed, expand them.

  • Why PhotoBooth can't get the background images to work properly on the picture

    Why PhotoBooth can get the background images to work properly on the picture, is it because too much luminosity in the environment or too little? I have tried everything and nothing works.
    <Re-Titled By Host>

    Might try this...
    Go to System Preferences > Universal Access and down in the Display: section make sure that the Enhance contrast: slider is all the way to left to Normal, or more to the right for less Contrast.
    Go to System Preferences > Accessibility in 10.8.x,and down in the Display: section make sure that the Enhance contrast: slider is all the way to left to Normal, or more to the right for less Contrast.

  • Skrolu mouse does not work properly in the list of bookmarks

    skrolu mouse does not work properly in the list of bookmarks
    yer imleri listesinde maus skrolu düzgün çalışmıyor

    A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    You can also try to move (delete) the Firefox plist file.<br />
    See [http://www.macfixit.com/article.php?story=20060606082246983 How .plist files become corrupt and troubleshooting the results]
    Go to "Library > Preferences" and remove the plist file for Firefox (org.mozilla.firefox.plist).

  • My iPhone 5 speaker suddenly doesn't work properly!  The volume is so low I can't hear the phone ring.  I've restored and updated and done everything I can think of.  Please help!

    My iPhone 5 speaker suddenly doesn't work properly!  The volume is so low I can't hear the phone ring.  I've restored and updated and done everything I can think of.  Please help!

    Sorry, I think you got scam.
    Last thing you can try is restore as new:
    http://support.apple.com/kb/HT1414

Maybe you are looking for