Do I have to use another fitness app in order for the new health app to track my fitness? Or does the health app have its own gps tracking? It's not working for me.

I have the iphone 6 ios 8.0.2. The health app hasn't worked for me yet. I have pinned things to my dashboard but it isn't updating anything. I curious to know if I need a third party app in order for it to track? Or if it is supposed to be tracking?

The iPhone 6 has a built in M8 coprocessor that tracks steps. Start with the manual:
http://support.apple.com/manuals/#iphone
p. 120.

Similar Messages

HT4528 I have an Iphone 4s and downloaded the "NEW and IMPROVED" I/OS 6 - Don't do it! Now my bluetooth connection to my radio is not working. I connects but will not advance songs using the Radio Controls.

Hello, My Controls on my new Pansonic Car radion stopped working after downloading os/6. It is a Bluetooh connection works and the music plays - but the song advance control on the radion no longer works. How can I get back my old os5?

When you turn iMessage off and then back on again, is it completely activating? If not, then turn off iMessage, wait a few minutes, then turn it back on. If it activates, it pulls your phone number from your SIM and account. If it activates, you go into those same settings and set the Send & Receive.

People picker is not working for ie11 but working fine for other lower version

i am using sharepoint 2010 and windows authentication
recently i have updated my ie to ie11 and problem goes here.
when i try to select from people picker, there are an unexpected error happened
however when i use other ie version, people picker work fine, what goes wrong?
i have already added my system as trusted site
if there any others thing i miss out?

Hi,
According to your post, my understanding is that People picker is not working for ie11 but working fine for other lower version.
IE 11 is known to have compatibility issues on SharePoint 2010, please make sure to:
first of all, try installing latest update for IE 11 (several compatibility issues were fixed since the first release)
add the site to compatibility view (in IE> Tools> Compatibility view settings> type site name> add)
add the site to trusted sites and set the zone security level to low (in IE> Internet Options> Security> trusted sites> sites>add your site there> ok> custom level> select low> reset> ok)
You can use developer tools (f12) and set browser mode to the version that is most compatible with your environment.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Push mail is not working for gmail and hotmail on ...

i have been using my nokia e72 since february 2011. i had two mailbox configured, gmail and hotmail. Until last week, everything was fine. but suddenly my push mail stopped working for both gmail and hotmail.
when i noticed this, i removed both of my mailboxes and tried to create a new one. when trying to create a Gmail mailbox, it goes fine upto "downloading terms". after that, when i choose to connect to "nokia messaging service", it creates a mailbox named "HOTMAIL" instead of "GMAIL". it takes only my user name for Gmail and rest of the settings are for HOTMAIL.
if i choose not to connect to "nokia messaging service" then it works quite well. but thats not real push mail. it will check my email every 5 mins. but when tried to create a "HOTMAIL" mailbox, i had no luck. no matter how i try, hotmail mailbox can't download my mail. and as hotmail don't support IMAP, its very disgusting to use "POP3" if i choose not to connect to nokia messaging.
i have tried to reset the phone using *#7370# and *#7730#, but no luck. i also tried reinstalling the firmware using ovi suite, but i didn't had any luck either.
please help me, i am very disappointed with this kind of problem specially from nokia.
someone please do help. i m in a huge mess.

delete the account and re-add it.

I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords but it does not work for the macbook.

I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords several times but it does not work for the macbook.

You will have to provide the correct password to delete the existing account, if you have tried but are not getting the password reset email, contact Apple for assistance by going to https://expresslane.apple.com, then click More Products and Services>Apple ID>Other Apple ID Topics>Lost or forgotten Apple ID password.

Incoming Email not working for one web app, but IS working for others in same farm.

I have enabled incoming email in a large multi-web application farm running SharePoint 2013 SP1 and the Feb 2015/March 2015 CUs that were pushed down in Windows Updates. It works just fine for two web applications, but it will not work for one particular
web application. I see the email land in the /drop folder. If I remove the email address from the library in http://nonworkingapp web
application and use it on a library in a http://working web application, then the email is processed successfully. Conversely,
if I take an address from a library in http://working and move it to a library inhttp://nonworkingapp it
does not work. I've tried multiple site collections on http://nonworkingapp. This rules out any SMTP issues, etc. and means
the issue is bound to this web application. Permissions are the same between the "non-working" and "working" locations: domain users are members on the site, and the library inherits permissions from the site. The App Pool and Timer
Service accounts have rights to the folder and to the library.
The error in the ULS log is the typical error processing message, but it gives no additional information even though I have enabled Verbose logging.
The Incoming E-Mail service has completed a batch. The elapsed time was 00:00: 00.0156294. The service processed 2 message(s) in total. Errors occurred processing 2 message(s): Message ID: Message
ID:
Typically, you see "alias not found" or some permissions or quota issue here, but this issue is NOT the same as those. In this case NO additional information is provided in ULS.
Edit: running stsadm.exe -o refreshdms -url http://one/failing/site fixed some similar issues where "Unknown alias" was
reported even though the list did have an alias (see here:http://blogs.technet.com/b/vinitt/archive/2009/07/15/e-mail-enabled-list-alias-information-is-not-synchronized-between-configuration-database-and-content-database.aspx).
This did not fix the issue for the case mentioned above.
What could possibly be the issue preventing incoming email from working on this one web application?

Thanks for your reply. Incoming E-Mail was running on all 3 WFE, however I do not think this was the cause. As noted, _other_ emails send to http://workingapp are working just fine. I can send two emails - one to a library on http://workingapp
and another on http://notworkingapp. The email to http://notworkingapp will sit in the drop folder, while the one to http://workingapp will be processed correctly. In addition, the ULS log on WFE1 indicates an attempt to process the file fails.
So clearly, the timer job on WFE1 is running and attempting to process the file. For kicks, I disabled the service on WFE2 and WFE3, but with no change in the behavior.
WRT to #1, I have done this already (as noted in the original post). I can remove an alias from http://workingapp and place it on http://nonworkingapp and it is not processed. If I return it to http://workingapp it is processed. In other
words, I go into Library Settings -> Incoming Email for a working library, and copy the alias, then disable incoming email for that library. I then go to Library Settings -> Incoming Email for a non-working library, enable incoming email, and paste
the alias. Once done, emails sent to the alias are not processed. I then do the reverse, and it works again.
On #2, I have already tried multiple libraries on http://nonworkingapp (also as noted in the original post).
In my environment, incoming email does not work for any library on http://nonworkingapp, but does work for any library on http://workingapp. Troubleshooting listed above has ruled out any problem with basic mail server configuration or library settings
- the problem is bound to http://nonworkingapp
I'm not sure what you mean by "steps to reproduce the issue". If I knew that, I would probably be able to solve the issue. The best I could come up with to describe the situation would be:
Set up SP 2010 in a three-node configuration with multiple web apps
Enable incoming email and confirm it works
Migrate to a SP2013 SP1 farm in a three node configuration.
Enable a new email alias for a library
Observe that it doesn't work for one web application.
Obviously, it's pretty unlikely that attempting that in a lab would actually have the same result.

Hi could someone help me please ? Ive just bought the new ipad and want to put some movies on it. I have already converted some movies using handbrake and tried to transfer them to my ipad and it just wont work. ive tried drag and drop and everything

Hi could someone help me please ? Ive just bought the new ipad and want to put some movies on it. I have already converted some movies using handbrake and tried to transfer them to my ipad and it just wont work. ive tried drag and drop and everything

bluztoo wrote:
Haven't really used any of them including VLC - actually use netflix on the ipad more than anything. I was able to drop an mp4 into imovie on my ipad and see it there. This was something I had shot as avhcd and converted with turbo.264. Played fine. Probably not what you want for a movie player though.
Well, turbo.264 is indeed very nice to have - even for converting full-sized movies. (Nevertheless, TechRadar's latest roundup (see http://www.techradar.com/news/software/applications/6-of-the-best-video-converte rs-for-mac-1074303 ; also linked from another roundup at http://www.iphonelife.com/blog/87/benchmark-excellent-multimedia-converter-handb rake-vs-commercial-apps ) has shown it's still worse than HandBrake in most respects.)
All H.264 files (assuming they are H.264 level 4.1 or lower) are compatible with the built-in Videos app.
bluztoo wrote:
Those of you who use other players, what do you reccomend? Just curious.
It entirely depends on your needs. The top players (AVPlayerHD / ProPlayer, It's Playing, GoodPlayer) all have different strengths and weaknesses. I myself use It's Playing the most as I convert everything into MP4 and simply love the DSP's (brightness / volume / saturation boosting). (Its software decoders are definitely worse than those of AVPlayerHD / ProPlayer; however, MP4's are played back from hardware.)

M177fw wireless not working for scanner only-have same printer in second location

I have this exact same MFP laserjet in another location that works perfectly over the wifi network. I just purchased the same printer for a second physical location and installed it. I gave the new printer a different name when I installed the device. Printing over wifi works perfectly from two laptops. The copy function works perfectly. I cannot get the scanner to work at the new location from either laptop.
When I installed the software on one of the laptops, I got a message that the driver was already present and suggested I use the existing version already installed. So I used the already installed software. For this laptop, I have a shortcut from the start menu called HP Scan. At the original location, this works fine over wifi. For the new printer at the new location, when I start HP Scan from either the HP folder or the shortcut, I get a box titled "Scanner Unreachable. Scanner communication cannot be established..." and suggests updating the IP address. I looked at the printer configuration and the ip address is correct.
I reset the printer to the factory settings, rebooted the modem and configured the printer again, hoping that the correct IP address would populate correctly, but I have the same problem. So my questions are:
-Is it likely that the IP address is the problem for the scanner and how do I fix it?
-If it is the IP address, what can I do to not have to manually change it each time I go to a different location?
-If not, what is the likely problem? What can I do to fix it?

Hi,
As you mention "When I installed the software on one of the laptops, I got a message that the driver was already present and suggested I use the existing version already installed.", such a message is common for adding a printer from the Windows Add a Printer wizard, may you added it by clicking add printer under Devices and Printers?
If so, that may explain the issue as the printer should be added via the HP Software for the HP Scan to operate.
Be sure to remove the newly added device first by right clicking it and selecting Remove Device, then reboot your PC.
From the Start menu select HP and open the printer folder. then select Reconfigure your HP device.
Follow the steps on screen to add the printer on your current location and check if that may help,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - not working for one user - working for another

Hi,
I recently have an issue with Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - NOT working for one user - working for another.
Windows 7 updates recently installed ???
By checking the device properties on the user that works - "Synaptics PS/2 Port Touchpad 13/10/2011 Version 15.3.29.0"
When the other user logs on, the touchpad works for a few seconds, then a displays a black square with a red diagonal line through it, then the touchpad won't respond. Trying to use the keypad to navigate to system diagnosics or anything to find further info is useless....

Hey eagle_no11,
Thank you for joining the HP Support Community!
I will do my best in assisting to hopefully get the TouchPad to work on the second user profile.
What I would like to start off with, is to restore the original Synaptics drivers onto the profile that is not working correctly. I have included the document Using Recovery Manager to Restore Software and Drivers (Windows 7).
Once you have installed the original drivers, you will need to complete all updates from both HP, as well as Windows. For these updates, if you open the HP Support Assistant, and select Maintain, you should see an option for updating.
Please let me know how these steps do work out for you.
Have a great day!
I worked on behalf of HP

Sound not working for apps

The sound is not working for game apps, and possibly other apps. Sound effects work. Side switch is not on mute. Nothing, I repeat NOTHING, is muted. YouTube videos work. System sounds work. Games that are supposed to have sounds no longer have sounds.
I also cannot update the iOS system. It says that there is no internet connection but the internet works fine for everything else. I am posting this from the device. Resetting and restarting have not worked. Also, the keyboard seems to be having minor problems as well, such as capitalizing, autocorrect, etc, which used to work but now doesn't.
I have not used the iPad in over a year because of forgotten passcode, and now it has a bajillion problems!
btw, how do I change the Apple ID username and email information?

You said that you "reset" and that means different things to different people so we could use some clarification on that.
For now, I would start with this. If you have already done this, please remember that is where the clarification is so important. Go to Settings>General>Reset>Reset all settings. The iPad will start up on its own when you do this. No data is lost. It all settings have to be entered again.
IF you changed your Apple ID, go to settings>ITunes & App Store>Apple ID. Sign out in there and sign in with the new ID. This is worthwhile reading and should help.
What to do after you change your Apple ID email address or password - Apple Support

My itunes store will not open. : ( It has not worked for months. I have tried everything!

My itunes store will not open. It is a blank, white screen when I click on it. It has not worked for months. I have installed all software updates more than once during this time and there is still no change. I am using Mac OSX version 10.6.8 and itunes version 11.1.5. I have tried every solution I can find on the internet. Please help!

Hi Abeaze,
Welcome to the Support Communities!
The article below will get you connected with the iTunes Store Support. These folks can review your account with you:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933?viewlocale=en_US
Cheers,
- Judy

Where used list is not working for IMG nodes/Document in solar01

hi experts
In template project , we are using same IMG objects in different business processes and subsequent configuration document is attached to each IMG node in configuration tab. ( like same IMG node - define order types used in different business process configuration tab )
when i use " where used list " from the configuration tab , its not showing the IMG objects used in different business processes in the same project. whereas its showing the IMG nodes used in the different project.
I need to find out the same IMG objects/ document used in the same project using the " Where used list " button.
Please provide your answers
Note : we have linked one configuration document to same IMG nodes used in different business. " where used list " also not working for documents as well
Thanks
Sol man

Hello there,
I just tried some tests and couldn't face any problem with locating other usages for the objects in configuration tab.
You mentioned a configuration document, so have in mind that the document usage will only be considered if it is a link to the same document and not just a copy.
e.g:
Here I created a document in this node:
Then I added it as a link here:
and as a copy here:
When I go back to the original node and use the where-used, it'll only show the original and the link:
This happens because after copying a document, it is considered as a new one instead of another usage of the original one.
best regards,
Fabricius

USB port Working for my Wireless mouse but not working for another Devices like Flash Memory ?, USB port Working for my Wireless mouse but not working for another Devices like Flash Memory ?

USB port Working for my Wireless mouse but not working for another Devices like Flash Memory ? Anyone can help me plz?

Hi, is this a question" Post?
or are you just offering an insight into your Mouse Issue?
Generally and at times we all have little idiosyncrasies appearing with the running of our Macs.
I use the same Logitech BT with my MBP. MB & iBook..(not at the same time) Only ever had one issue
and the cure was to completely Delete the mouse from BT -> Repair Permissions & Reboot then Re Install the BT mouse..Ihave just put a new set of batteries in the Logitech (only 2nd set ever)...L

Browserlab is not working for me, it wont complete the load even though i have high speed internet?

Subject
First time use of browser lab not working.
Problem Description
Ok, so, I'm working on a tutorial page on CS5.5 and I am at the stage of using browserlab to preview it online. I log in and enter my password then it opens my browser and I click on "start using browserlab now" and a load screed appears. It loads for about a minute and then remains "blank", which is in fact the adobe screen with a language bar at the top right, but NO preview pages? also, if I then go into dreamweaver again the browserlab tab reports an error saying "Timed out, failed to connect to BrowserLab"
Steps to Recreate
This issue happens every time, and I have never got it to work.
Windows 7 32-bit operating system.
I am using the main BrowserLab interface as well as testing via Dreamweaver integration (DW version is version 11.5 build 5315)
I dont understand what this next statement means? "What is the URL you're testing against?"
Expected Results
I thought that browserlab would open my page in multiple browsers on one page so i could see if there are any errors for different browser types.
Actual Results
Did not load correctly and gives errors.
Many thanks in advance
Marshall de Meillon

Hi Marshall,
Thanks for the detailed report. Don't worry about your step #4, you didn't get to that point.
From what I can tell, you're opening up BrowserLab in your browser first, then trying to do a preview from Dreamweaver, is that correct? I'd like to try a test where you first test BrowserLab in standalone mode and if that works, then try the BrowserLab integration with Dreamweaver. So please try doing the following steps:
Close Dreamweaver and all of your browser windows.
Leave DW closed, open a single browser window and go to https://browserlab.adobe.com
Log in, and request a screenshot by typing in a URL like http://www.yahoo.com and pressing <Enter>
Does that work for you? Do you get screenshots for that? If not, please describe the steps you followed and what you see
If so, close your browser window and open Dreamweaver. Do not open your browser to BrowserLab
In DW, open the webpage you'd like to view in BrowserLab and press the preview button in the BrowserLab panel as shown in your shot
You may need to log in again, but let me know what happens with that test.
Mark

HT201365 Just dowloaded the new ios 7, and i can't seem to get any apps to download in the app store. It doesn't have the meter bar anymore and all it does is have a Blue circle spin and spin for over 5 or 10 min. without nothing happening! Help !!!

Just downloaded the new ios 7, and I can't seem to get any apps to download in the app store. It doesn't have the meter bar anymore and all it does is have a blue circle spin and spin for over 5 min. without nothing happening! Help!!!

Hi,
This is how App Store app shows now when an app is downloading. If you cannot download anything, go to Settings > iTunes & App Store, remove your Apple ID, and set it again. That should work.
Hope that helps.

Do I have to use another fitness app in order for the new health app to track my fitness? Or does the health app have its own gps tracking? It's not working for me.

Similar Messages

Maybe you are looking for