Do i need to bring in ID/documents into store if want to set up mobile contract?

Hi, i have nebver been with EE before and looking to take out a 2 year mobile contract. Does anyone know how you set up a Contract? do i have to go into store and take in any ID/ proof of identity or any other documents?thanks,

Hi
You would need to take two proofs into the store.
One such as a Passport or Driving Licence. And also a proof of address such as a utility bill, this must be dated within the last 3 months.
Hope this helps!
Thanks.

Similar Messages

I need to turn an indesign document into an editable pdf. how do I do that?

I need to turn an indesign document into an editable pdf, how do I do that?

InCopy is a solution, but it's not the only viable solution.
I update many books, from 200 pages to 3,200 pages every year, long document, very techincal tax books.
Some are done through InCopy, some are edited word files and rtfs exported from InDesign, some are marked up hard copies etc.
It totally depends on the clients technical ability with computers. Last year I taught over 30 authors of ours how to use InCopy. Some were receptive, some were dubious, some were totally clueless.
And on the dubious and totally clueless I spent more time troubleshooting their problems than I would normally with a Word/RTF option.
Some people are capable of switching to InCopy or even know how to use it in the first place. For anyone never used InDesign or InCopy before then it's a massive learning curve to jump from MS Word et al word processors, to InCopy.
I do agree, it is the best solution that's out there, technically. But that solution is not usable by a lot of people.
Yeh if the client is comfortable with InCopy then it's the way forward.
But in most cases, in my experience, it's faster and more efficient to Export the text as RTF and let the author update the RTF. That leaves you in control of reinserting the text and formatting it correctly. Rather than letting the client add bold, underline, italics, superscript, subscripts, crazy workarounds because they didn't know how to do it properly. And in the end you end up with 2 or 3 times the amount of work than is necessary, just cleaning up what the client has done in InCopy that does not suit the overall formatting of the publications.

Please, help... I need to convert an Illustrator document into .pdf

Does anybody can help me? I have a document in Adobe Illustrator Artwork 12.0 but don't have the program to open it (and don't know which one I need)
If I send the document, could you please convert it into .pdf or word. It's a letterhead for the church I work at.
Thank you very much.

E-mail the Illustrator document to me at the following address:
harron {at mark} kurakichi {dot} com
If you can, put the .ai document in a .zip archive before e-mailing.

Need help importing large word document into CS2

I am using ID CS2. I am putting together a document that has 120 pages that's 11.625 wide by 21.25 tall (newspaper) and will be in 8 columns. I want to place a text document using the autoflow method. My problem is, there are so many words, characters, etc. that my ID freezes up. I have changed the original document to a Word Doc, Excel file and a text document. Changing the type document seemed to make a difference. What is the best way to place the text and format it?

Technically, you don't need to draw the text box first. If you already have your margins and columns correct (which I assume you have set up on the master so it automatically applies to all pages), ID will create the textbox when you autoflow (shift click or alt click with a loaded curser). Just click with your loaded curser in the top left of the first column. Another way to do this is to create an 8 column text box on your master and click over it on the actual page. The advantage to this is that you don't have 8 text boxes across your page, but one single text box divided into eight columns. There are pros and cons to both work flows, though it appears that the new CS5 has more pros to the single text box with columns than the eight text boxes.
You should only remove the styles and formatting if you want all the formatting stripped from the file as you place it. Otherwise, you can actually map the styles in the placed document to the ones in the ID file from that dialog box, and that might save you a lot of formatting time with such a large document--assuming that the file you are placing is correctly styled and formatted (which is not always the case).
Since I'm now not sure what you meant by ID "freezing" in your original post--if ID actually crashes (closes itself with or without an error message) when you try this import, you might try opening the final text doc and breaking it up into smaller segments to place. However, there should be no problem placing a text document of that length into ID. If ID is just pausing for a while, do give it time to actually process all those pages.

Thinking apple needs to bring a option to pick from photo gallery to set as a theme/background on imessage/sms that will be cool to see on iphone :)

I THINK THAT IT WILL BE SO COOL IF YOU CAN PIC FROM YOUR PHOTO GALLERY TO SET AS THE BACKGROUND IN YOUR IMESSAGES/SMS IT WILL GIVE A NEW LOOK AND FEEL ALSO THE OPTION TO BLUR THE BACK GROUND JUST A LITTLE OR SET AS IS.....WHAT DO IPHONE USERS THINK SHOULD APPLE DO THE NEXT BIG UPDATE WHERE YOU CAN DO THAT ??????

This is a user to user technical help forum. You can contact Apple here: http://www.apple.com/feedback/

Convert word document into .JPG image. Possible?

Hello
I need to convert a word document into a .JPG image... Anyone who can recommend a mac program that can help, or how word can do it for me?
Best regards
Jesper Pedersen

In Word go to File > Print... > PDF > Save As PDF.Open the resulting file in Preview.
Choose File > Save As... > Format: JPEG.
Hope that helps.
mrtotes

Combining two sales documents into one billing document

Hi Friends,
I need to combine two sales document into one billing document. Header data is same in both sales document.
I have set factory calendar in the payer master.
Tried for data transfer rotine at copy control of item level. But was not sure which routine to be set.
Please let me know, what all settings are required to create one combine billing document.
Regards
Suman

Hi,
Is it delivery based billing or order based billing?
2 orders / 2 deliveries and 1 invoice.
For the above situation you need to write a routine which eliminates document number difference for Reference and Allocation.
If you do not have different customer purchase orders for these two sales orders and in your copy control from delivery to billing your assignment and reference numbers are blank then system will club these deliveries and create one sales order.
Else you need to eliminate these by writing a copy control routine and assign it at the header level.
Hope this helps. Pl. revert in case of further clarifications.
Thanks
Krishna.

I can not export Pages document into a Word file

Please help! I have researched many feeds in regards to my issue. None of the suggestions seem to work. I need to export a Pages document into a Word file and get the error messge "an unknown error has occured". I have attempted to "Save as" and export directly from the file menu. All of my fonts have been validated. Not sure what my other options are. Can anyone give any insight? Thanks

In case if the files are missing for the once you have in your book module they can have issues exporting as PDF or JPEG.
Please check the same and replace the files which are missing or attach the same and then try exporting the same.
-Mandhir

When I have my Firefox browser running, if I bring up a document from my computer, it appears briefly, then disappears behind the browser. It shows in the taskbar, but won't stay on top until I minimize all other windows.

When I have my Firefox browser running, if I bring up a document from my computer, it appears briefly, then disappears behind the browser. It shows in the taskbar, but won't stay on top until I minimize all other windows.

Hi NicoMan,
According to your description ,we seem to suffer a performance issue here.
Have you tried to open the task manager to check the system performance ? Is there any specific process occupied many system resources ?Will the issue occur only with the specific applications ?
We can try to restart the Windows Explorer process to have a check.
If it only occurred with the spefcific two applications ,we can try to end the other application processes manually from the task manager to have a check .
If this is caused by the specific application ,we may need to look for help from the third party support considering they are all the third party applications .
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Opening new word document brings up minimized documents

Hi,
Opening a new word document, brings up minimized documents.
This is a long time issue! Which i would rather not have it happen. It's annoying!
Has anybody found a solution for it?

Hi,
I'm not sure about the symptom yet, do you mean when you create a new document, the Word window becomes minimized? If I'm wrong, please provide detailed reproduce steps so that I can do more investigation.
I also need to confirm whether the issue persists when we open Word in Safe Mode:
Press Win + R, type "winword.exe /safe" in the blank box, press Enter, then Word will start in Safe Mode with no add-in loaded. Check if the issue persists.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

If I wanted to replace my iPhone 5 at the Apple Store, do I need to bring everything that came with the box, or just the iPhone?

My new iPhone 5 is currently having problems with the wifi. I can't connect to my home network unless I am right next to the router. Even then there are only one or two bars. When I am in a public place like Starbucks, I can't find any wifi networks. I plan on bringing it to the Apple Store and getting it replaced. Can I just get the iPhone replaced, or do I need to replace everything (box, manuals, headphones, etc)?

all you need to bring is the phone that is all they need to replace then that is all you need

Need to convert pictures and documents to PDF

need to convert pictures and documents to PDF

Hi BodyWhys,
Please do below if you are using Adobe Reader:
1. Launch Reader
2. Select "Tool" at right pane
3. Sign in with your Adobe ID and password after clicking "Sign in" under "Tools"
4. Select "Create PDF" tab
5. Click "Select File" button
6. Select your picture or document (please see more information on supported file at http://helpx.adobe.com/acrobat-com/kb/using-createpdf.html#main_Convert_a_file_to_PDF)
7. Click "Convert" button
8. Click "View PDF File in Reader" after converting the file
Please do below if you are using online service
1. Login to https://createpdf.acrobat.com/signin.html with your Adobe ID and password
2. Select "Convert to PDF"
3. Click "Select Files" button
4. Click "Download" button in progress bar after convert is complete.
Please let me know if you have more quetions.
thank you.
hisami

I need to make a pdf document, made in photoshop, 'page turn' and then add it to my website. I know I can do this in indesign but indesign will not open pdf files for some inexplicable reason. Any ideas how I can do it without completely starting again?

I need to make a pdf document, already made in photoshop, 'page turn' and then add it to my website as an e-brochure. I know I can do this in indesign but indesign will not open pdf files for some inexplicable reason. Any ideas how I can do it without completely starting again?

Hello waitingone,
please try this (all terms are translated from my German programs to my best knowledge):
1. Did the creator of the pdf file enable the import options?
2. See import options: choose an other visibility option for your layer.
3. Let you show the import options and click into one with a black background and try these out (often a gray is selected).
4. See trimming: try the different modes there. Often works: "Media".
5. Is the pdf file (eg from Word) correctly created?
6. Is the PDF file protected? >>> no import possible.
7. If that does not help, store the pdf file in Acrobat, repair possible errors, run the PDF Optimizer before placing in InDesign.
Good luck!
Hans-Günter

When I try to open up a PDF document, i get the following error message: "There was an error opening this document. The network path was not found" AArrgh please help as I need to open up my documents. Thanks.

When I open up a PDF Document all i get is an error message saying: "There was an error opening this document. The network path was not found" I dont know how to fix this, so looking for some advice please, as I really need o open up my documents.
Thank for any help.

The documents I’m trying to read are already saved on my computer, under various different headings, I know that we have a server, so I only assume these documents are saved on here, as I said before I’m not good with all this techno stuff. I do my work each week ( on a payroll system) and save the documents for each company, they automatically go to the correct place. I never request for them to be saved in a certain place ( well not that I’m aware of) . I then on occasions need to open up this information, it is then that I can’t read or open the documents. We do have a tech help, but they are off sick until the 5th Jan, hence me trying to work out if I can fix this problem through this help site. Its ADOBE Reader that I’m trying to use.

Hi there, I have a Macbook Pro and I have been using Libre Office but I am not happy with it. I need a good word processing package to produce a manuscript and don't know if I have to get Word for Mac and how to put my documents into it.

Hi there and hello everybody.
I am writing a book and have been using Libre Office and would like a better word processing package.
I have heard that Pages 5 is better than the latest one. I need to be able to put my Libre Office documents
into Pages. Anyone know how to do this please?

magathon wrote:
Thanks. So would you say Word is the best processing package? And how do I choose which package 'opens' them.
This is a basic computer skill you might want to learn. You can always control which application opens any document, and the steps below apply to any Mac or Windows computer you use:
Method 1: Drag the document icon on top of the application (Word, Pages, LibreOffice...) icon and release. The system will open the document in the application you dragged it to.
Method 2: Go into the application (Word, Pages, LibreOffice...) and choose File/Open. Locate and select the document, and click the Open or OK button.
Method 3: Select the document icon and choose File/Open With, then choose the application you want to open the document with.
The only time these don't work is when the application cannot open that type of document. For example, you usually can't make a photo editor open a text file. But Word, Pages, and LibreOffice all know how to open text files, RTF files, and Word files.
But if it is important that the document formatting is exactly preserved when exchanging with other Word users, you really should use Word. If you can't afford to pay the retail price for a copy, Microsoft now lets you use Office for $6.99 a month or $69.99 a year.

Do i need to bring in ID/documents into store if want to set up mobile contract?

Similar Messages

Maybe you are looking for