Do I need to do anything different with the client or is it a server setting that needs modification

I have a Flex based application which is using Flash Media Server (FMS) server (version 4.0) for live video streaming between two users (i.e. a one to one teleconferencing service). This streaming is one-to-one, as defined by business rules, so that no third person can join a teleconference. Either person can start the video stream via a browser-based Flex client and communication gets established once the second user joins. Validation for connecting the streams of the two users is implemented on the FMS server (as server side scripting defined in main.asc). I am facing three critical problems with our teleconferencing solution.
1.Often times, full communication can not be established between the two users. One user can not usually see or hear the other user. There is a client side 'refresh' button that when clicked, attempts to establish a connection via the server side script. This sometimes works. Before implementing our current server side script, I tried establishing a stream by using methods found here: http://forums.adobe.com/thread/905613
I think the method below may work as it would give me an array of subscribers to the stream.
getLiveStreamStats(appInst:String, stream:String) : Object
But the problem is that server returns the following:
<result>
<level>error</level>
<code>Admin.API.MethodNotAllowed</code>
<description>getlivestreams - Method not allowed!</description>
<timestamp>8/7/2012 10:05:38 AM</timestamp>
</result>

Srr20 wrote:
I bought a new iPad two days back. After moving all my stuff from iPad 2, I realized that the camera shutter is not opening . Is it a configuration issue or do I need to do anything to get it opertional
Try a Hard Reset. Hold ON/OFF Button and Home Button at the same time until it reboots and Apple Logo appears, let go of buttons.
Mybe that will do it...

Similar Messages

HT201318 I need to cancel my storage plan and I don't have physical phone or anything associated with the phone anymore to get serial # from, so how do I contact apple?

I need to cancel my storage plan and I don't have the physical phone or anything associated with the phone anymore to get serial # from, so how do I contact apple?

Contact the Apple online store at the number shown at the bottom of this page (1-800-MY-APPLE in the U.S. and Canada.)
If you ever synced your phone with iTunes, you can find your serial number by doing the following:
Launch iTunes on your computer.
Hold down your Control key, then on the menu bar in iTunes click iTunes>About iTunes (Mac) or Help>About iTunes (PC).
Any previously synced devices will scroll in a pop-up window; press the space bar to stop scrolling so you can write down the serial number.

I have two iPads. With two functioning iPads. Is it possible (on the same ID) to sync two of them differently with the same account. So I want to use the new iPad for all my current functions. The old iPad for just my music collection?

I have two iPads. With two functioning iPads. Is it possible (on the same ID) to sync two of them differently with the same account. So I want to use the new iPad for all my current functions. The old iPad for just my music collection and remove all the other stuff?

Very easily. I have an iPod touch and iPad on the same account with totally different content.
If you use iTunes, connect each iPad to your computer and open iTunes and deselect any automatic updating/syncing. If you don't sync with iTunes but have them set up independently, under the settings, App Store, turn off automatic downloads for apps, etc.
I'm old fashioned, I set up and sync my iPad and iPod to my computer and iTunes. Each device has a different name and I manage content manually and only allow sharing on what I want shared.

Mapviewer displaying maps differently from the client than from the server

Can anyone explain to me why this is happening. I have been deploying my java server page to the server, and the way it works is to have multiple base routes which are not originally shown, but the user can 'check' them and they will display. On the server this works as one would expect, but on the client
I originally couldn't get this to work through Jdeveloper, but now it works -- that's another story :(
all of my base maps are displayed when the map first comes up. I don't want this to occur because it takes too long. Anyway, does anyone know why the map is working different from the client than it does when I deploy it to the server? Here is the significant code:
var basemap1 = new MVBaseMap("ds_prod.prod_rdlg_qry");
var basemap2 = new MVBaseMap("ds_prod.interstate", "", true);
basemap2.setTransparent(true);
var basemap3 = new MVBaseMap("ds_prod.primary", "", true);
basemap3.setTransparent(true);
mapview = new MVMapView(document.getElementById("map"), baseURL);
mapview.addBaseMapLayer(basemap1);
mapview.addBaseMapLayer(basemap2);
mapview.addBaseMapLayer(basemap3);
basemap1.setVisible (true);
basemap2.setVisible (false);
basemap3.setVisible (false);
Any suggestions would be appreciated. Thanks.

Hi
Whitch version of mapviewer are you using? (MVBaseMap/addBaseMapLayer is for older versions, and in newer there is MVMapTileLayer/addMapTileLayer)
I had similar difficulties displaying multiple tile layers in application with mapviewer ver. B080618. (not sute, may be in newer versions this works different)
When adding all tile layers initially and then setting theig Visible properties, browser fetches from server data for ALL the layers (even if they were set to visible -> false)
the workaround was to add aditional layers ony when this is needed.
Michael

DPM failed to communicate with the protection agent on DPM 2010 SERVER because the agent is not responding. (ID 43 Details: Internal error code: 0x8099090E)

Hi everyone,
Backup jobs for protected members are intermittently failing with the following error on the DPM server:
DPM failed to communicate with the protection agent on <DPM 2010 SERVER> because the agent is not responding. (ID 43 Details: Internal error code: 0x8099090E)
Why does the DPM server failing to see it's own DPM agent cause the backup job for another server to fail? One day a backup will work fine, the next it may fail; and the next back to normal again...
The following error is recorded in the Service Control Manager event log on the DPM server just prior to the above error:
A timeout was reached (30000 milliseconds) while waiting for the DPMRA service to connect.
Thank you.
With regards,
Rob

Hello,
I have read these entire postings and see that my problems match most of the above problems.
I believe we have tried all of the ideas in this blog and lots of other ideas from other forums and internet searches.
We have about 80 small databases protected and set at 15 minute incremental and most will work but some fail. When they fail the most common, but not only error, is something like "DPM
failed to communicate with the protection agent on <DPM 2010 SERVER> because the agent is not responding. (ID 43 Details: Internal error code: 0x8099090E)". The alert is inactivated in the DPM Console, and the backups resume as normal."
Since later jobs are successful I thought all was well. All was well until I went to restore from incremental backups. We worked for two days (day and night work) to restore
from a corrupted virtual disk on our SQL Server 2008 R2. I suspect DPM had something to do with the corrupted virtual disk. All I know is that we never had this problem until installing DPM. Here is what we encountered when we went to restore
from the protection points:
* Restore jobs take a minimum of 15 minutes for jobs that are 45 MB or 2 GB.
* If you pick a backup from the list of recovery points that is not valid the job runs for 15 minutes and then "Failed".
* You cannot rerun the job because SQL Server 2008 has the table being recovered as <tablename> (recovering) and a retry will not work. Of course time is wasted while waiting
to see if it worked.
* Eventually you realize that even after dropping the table in the (recovering) mode in SQL that the restore point must be bad or possibly one of this failed recovery points.
* So begins the quest to start restoring recovery points one by one and 15 minutes by 15 minutes until you find one that actually restores to a SQL Instance.
* If you have 80 of these to do and you average trying three recovery points and each takes 15 minutes, not to mention the time to drop the table in SQL, well that time adds up to 3,600
minutes of trial and error. 60 hours of trial and error, wow not much of a savings using DPM over a SQL backup plan.
* And then you have to explain to your customers that their databases were restored but you do not know at what point the DB was restored.
All in all it seems like DPM concept is great but like many backups the backup plan looks good on paper but actually restoring a backup is quite a different matter.
I don't know if anyone has ever solved the problems presented in this forum but if they have then I wish they would post and if no one has solved the problem then shame on DPM.
Good luck everyone, but I for one have spent about two months on trying to protect and restore consistently. I have never had one day of consistent and reliable restore points. I
am going back to sql management plans for my backups. I have never, in 10 years had a sql generated backup fail me. Never.
gbl

I have two iphones in my house hold one syncs with my MAC Itunes the other doesn't is there a setting that casues the Iphone to stops syncing with Itunes?

I have two iphones in my house hold one syncs with my MAC Itunes the other doesn't is there a setting that casues the Iphone to stops syncing with Itunes?

You need to start over with Music. On the iPhone Music screen uncheck sync music. Also, on the Summary screen uncheck "Manually manage music and videos", then sync and it should clear off your phone.
Next, choose the music you want to sync. If you want to fit more on check "Convert higher bit rate songs to 128 kbps AAC". This will reduce quality slightly, but it won't be noticable unless you are using $300 headphones.

When our iPad is in use on the internet, my iMac internet connection goes off. I can't get the two devices to work at the same time with the AirPort Express. Is there a setting somewhere I may have missed?

When our iPad is in use on the internet, my iMac internet connection goes off. I can't get the two devices to work at the same time with the AirPort Express. Is there a setting somewhere I may have missed?

When two or more devices conflict it typically means that the DHCP service is either misconfigured or is not running at all. DHCP provides IP addresses to local network clients.
Is your AirPort Express base station the only router in your current network configuration? That is, is it connected directly to an Internet modem and not to another router upstream of it?

SQL developer not installed with the client software

Hi All,
OS: Windows
Clinet: 11g 64 bit
I have installed oracle client for windows 64 bit, as we know with client installation the sql developer also comes with. But in my case, I am able to find every other component but sql developer.
I am thninking of downloading the same from Oracle site, is there a alternate way for the same?
Regards,
Sphinx

What, exactly, did you install?
Did you install the Instant Client? Or did you do a full client install? If you did a full client install, which option did you pick during the installation process-- Administrator, Runtime, or Custom? If you did a full client install that didn't include SQL Developer, you can always restart the Oracle Universal Installer, do a custom install, and choose to install just SQL Developer.
That being said, my bias would generally be to download the most recent version of SQL Developer from OTN separately. SQL Developer gets released much more frequently than the Oracle client so the version on OTN is generally multiple revisions more recent than the version that was shipped with the client. If you're going to be developing code, you may as well leverage all the new features of SQL Developer rather than settling for whatever version was current when 11.2 was released.
Justin

Can i delete the apps that comes with the 5s phone, like itunes, weather and others that i won't be using?

can i delete the apps that comes with the 5s phone, like itunes, weather and others that i won't be using?

You can't delete some of the native apps but you can put them away in a folder OR some of them you can make invisible by restricting them (iTunes for example).

We live in motel but my iMac is not connecting with the internet but my cousin has hp laptop that works perfectly fine in my room. So can you help me with this situation?

We live in motel but my iMac is not connecting with the internet but my cousin has hp laptop that works perfectly fine in my room. So can you help me with this situation?

Joining an encrypted WEP or WPA Wi-Fi network

Aloha! I bought an iPhone 5 sprint via ebay, it has an iCloud id that was used to previous user. I don't have any contact with the previous user. I want to delete that email or id account that is now existing in my cell phone.

Aloha! I bought an iPhone 5 sprint via ebay, it has an iCloud id that was used to previous user. I don't have any contact with the previous user. I want to delete that email or id account that is now existing in my cell phone.

Again, you wasted your money. You can ignore raymond73's post, as you won't be able to turn off Find My Phone or delete the iCloud account associated with this phone, without knowing that info.
I don't know how clearer I can be.

Anyone have a fully functioning thread server ? (any server with the client

Anyone have a fully functioning thread server ? (any server with the client source code) ? can u share it to me ? please ? I'm very hard to find a fully functinal example....
thx ........

Why not just write one yourself, it's not that hard. If you can't, then maybe you should learn how to write one before you try to use one.

What is the different with the NLS setting in installation

I mean,
1.when I install the Oracle, set the native LANG to one(call it A), and client access it with the NLS set to another(call it B), what the different between if I install it with B directly? the client can get same result, isn't it?
2.For I upgrade a Oracle7 to oracle8i, the NLS keep unchanged(ASCII), both the server and the Client(developed with developer2000) runs OK. But I need exchange data with another Oracle8, whose NLS is different(ZHKGB2312,I forget it). when I upgraded the server(change to the same one,zhkgb2312), the original table size changed from 6 to 12, so the client can not run correctly.
Did anybody meet the same thing? and any advice for me to solve this problem?

>>when I install the Oracle, set the native LANG to one(call it A),
You mean your database was created using character set A ?
>>and client access it with the NLS set to another(call it B)
You mean your client NLS_LANG character set is B ?
what the different between if I install it with B directly? the client can get same result, isn't it?
From reading your 2nd question, I am guessing that you have Chinese data in both of your USA7ASCII and ZHKGB2312 database, and you want to exchange data between them. I am sure that this is working for all your English ASCII data, but not for the Chinese 2 byte data. This is because Oracle handles the character set conversions between the databases (character set conversion occurs only when the 2 character sets are different),the real problem is that you are using the wrong database character set to store your chinese data; US7ASCII can not process Chinese data correctly, they got into your database because you set the client character set to be the same as the database character set, hence you are fooling Oracle that you are feeding in US7ASCII data.
When you try to exchange data between databases, Oracle does not know how to receive or send these Chinese character from inside an US7ASCII database, it does not know what character set these 8 bit characters are encoded in, US7ASCII should contain 128 characters only.
Please refer to the Globalization Support FAQ - on the Globalization Support website http://technet.oracle.com/tech/globalization/content.html
for more information on Database character set and NLS_LANG client character set.

Output different with the spool file

Hi friends,
I have using this Tcode : S_ALR_87012301 to print GL account balances.
once executed, the system display correct information.
but once printed, in spool file, instead of showing the name of the company , the system displayed the environment e.g Production. If we try to print in DEV, the system will display Development.
Your advice is highly appreciated.

Celtic Mom
Welcome to the Apple user to user discussion forums
While I was organizing my photos, I realized there are about 30 or so photos that have the same exact file name as another photo. Example: There are two IMG_1243.jpg, but they are different pictures. They were taken at different times, even different years. I have used more than one camera to import photos. I have changed the name of one of the photos in the Title area in the information section of iPhoto. When I try to put the newly named photo into a folder that has the other IMG_1243, I get a message that says" An older item named "IMG_1243" already exists. Do you want to replace it with the newer one you are moving?"
I want to have both IMG_1243.jpg photos in the same folder. How can I do this? Also, I have a few thousand pictures, so how can I tell exactly how many photos have the same file name as another photo?
It sounds like you are using the finder inside the iPhoto library - do not do that - you will corrupt your library and lose the edits, keywords, etc that you have
iPhoto does not care about duplicate file names - it handles it fine
changing the title of a photo does not affect the file name - although when you export the photo you can use the title for the file name as an option
What are you doing and what do you want to accomplish?
Remember do not ever make any changes in the iPhoto library using the finder or any other program
LN

I have an older Macbook, and it has "n" wi-fi bt I need software to unlock it. It is supposed to come with the time-capsule but there is no software that I can find. Does anyone know were it is? supposed

I have an older white Macbook. It is supposed tohave "N" networking but needs to be unlocked. The software is supposed to come with the time-capsule, but I can not find it, also I checked with a friend who just bought an airport extreme and he can't find any software. Does anyone know where this software is located?

I think you are looking for this: AirPort Extreme 802.11n* Enabler for Mac - Apple Store (U.S.)

Do I need to do anything different with the client or is it a server setting that needs modification

Similar Messages

Maybe you are looking for