"Do Not Use Envelope" feature: WS Receiver vs Soap Receiver

I have a scenario that I need to call web service on receive side.
When I use Soap adapter, need to use mapping program to compose SOAP message mannully:
Envelope
   + Header
     ++MessageID
     ++Action
   +Body
     ++FistName
     ++FistName
In SOAP receiver adapter, I do not use PI envlope, so I have to choose "Do Not Use Soap Envelope" option.
When I use WS receiver adapter to call the same web service, I could not find the way the Soap adapter does.
Anyone tried to use same feature in WS adapter ?
Thanks
Liang
Edited by: Liang Ji on Oct 27, 2011 4:33 PM

>Anyone tried to use same feature in WS adapter ?
IMO, WS adapter does not provide "Do Not USe Envelope option" in 7.1 as well in above versions. You might want to see other experts opinion.

Similar Messages

Generating SOAP Envelope when DO NOT USE ENVELOPE option is marked

My scenario: SPROXY => XI => 3rdParty WebService. Communication is synchronous. I've a problem with soap envelope. It is required by webservice, but when I use standard soap envelope generated by SAP I've a problem with receiving response from webservice.
So I want to create my own envelope. For this reason I've used DO NOT USE SOAP ENVELOPE option. Now the challenge comes. How can I create my own soap envelope?
Do you have any working example? Soap envelope should be added to message send from XI to 3rdParty WebService.
Helping answers => a lot of points

I'm talking about HTTP header.
When I'm sending SOAP request from SAP my whole message looks like when I use soap envelope
POST / HTTP/1.0
Accept: */*
Host: 192.168.132.179:54000
User-Agent: SAP-Messaging-com.sap.aii.messaging/1.0505
Content-ID: <soap-02cce7702b1a11dd9902000c29ee261e[at]sap.com>
Content-Type: text/xml; charset=utf-8
Content-Disposition: attachment;filename="soap-02cce7702b1a11dd9902000c29ee261e[at]sap.com.xml"
Content-Description: SOAP
Content-Length: 259
SOAPACTION:
<SOAP:Envelope xmlns:SOAP='http://schemas.xmlsoap.org/soap/envelope/'><SOAP:Header/><SOAP:Body><ns0:Sd2Ids_SzfExport xmlns:ns0='http://www.dat.de/sdii/ids/Sd2SOAP.wsdl'><arg1>1234567899-0</arg1><arg2>1</arg2></ns0:Sd2Ids_SzfExport></SOAP:Body></SOAP:Envelope>
Always after such request I got and HTTP 411 error.
In opposite, when I'm sending request from e.g. Altova or SoapUI, my message looks:
POST / HTTP/1.1
Content-Type: text/xml; Charset=UTF-8
User-Agent: XML Spy
Host: 192.168.132.179:54000
Content-Length: 489
Connection: Keep-Alive
Cache-Control: no-cache
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
 <SOAP-ENV:Body>
 <m:Sd2Ids_SzfExport xmlns:m="http://www.dat.de/sdii/ids/Sd2SOAP.wsdl">
 <arg1 xsi:type="xsd:string">1234567899-0</arg1>
 <arg2 xsi:type="xsd:string">1</arg2>
 </m:Sd2Ids_SzfExport>
 </SOAP-ENV:Body>
</SOAP-ENV:Envelope>
After that request WebService response is correct.
You can find such differences (except Content-length which is a result of XML message formatting) in those two headers:
- for first is used HTTP 1.0 protocol for later 1.1
- in SAP header an info about attachment is added
After a lot of test I thing that those attachment info in header of HTTP is causing a problem. So I want to use DO NOT USE SOAP ENVELOPE option to generate HTTP header without Content-Disposition and generate SOAP Envelope manually.

ELEMENTS 11: I want to import files from my Epson 4490 Photo scanner and I can not use WIA feature.

I would like to import photos that I have scanned with my Epson 4490 photo scanner. I am scanning slides and it appears that I can not use the WAI feature that is offered in photoshop elements 11. I am able to import using photoshop elements 2. Has the functionality been lost in the newer version?

Try installing the TWAIN plug-in - http://helpx.adobe.com/photoshop-elements/kb/twain-installed-photoshop-elements-11.html.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Help Please -Need video to NOT automatically load when not using autoplay feature

Hi, I am hoping someone can help me or point me to the right
place to find what I need!
I use the standard skins in Flash for putting videos onto a
webpage but I am having problems when I use more than one video on
a page.
I have the videos set to autoplay -false, however the page
takes forever to load because the videos still download so they are
'ready' to play. (Of course this is what you want when you have one
video on a page but it is not helpful for more than one video...)
I have looked through the parameter options for the flv and
the HTML publish setting but can not find anything in here -I have
also tried to search through this forum and have tried "googling"
but no luck. Perhaps I am using the wrong terminology for my search
but I am not sure what the correct terminology is.
I am pretty sure that I need to go in to the actual flash
file of the skin and alter it to suit my needs but I am not sure
what code I need to do this etc....
I am using Flash CS3 and using the Actionscript3 skins. I
know how to access the standard flash skin flash files and alter
them to customize them but my knowledge of code is not the best.
If someone could help me out I would really appreciate it!!

Friend,
I have maintained the means of transport to the tranportation lane
Regards
KRN

STP very, VERY unstable for projects 45min DO NOT use for feature films

My mac has crashed nearly 50 times while using STP editing audio for a feature film. It simply isn't ready for primetime and its really bad. I've done all the troubleshooting tips (deleting preference files, cache files, etc.)
I would wholeheartedly suggest anyone look elsewhere if you have a large project. Digital Performer, etc. just anything other than STP

I've been using STP for almost five years for my podcast. Early on I discovered that, depending upon settings, I couldn't record more than a certain length without major issues. Essentially, the recording would get lost in a kind of crazy quilt of short patches. Cutting the file in two and then splicing together after editing usually fixed the issue.
These days, for example, recording at 96/24, I can get close to an hour and a half without any trouble. Usually I record less than an hour and a quarter, so I'm fine.
Otherwise, my sense is that STP has gotten more stable over time, though it's still plenty buggy.
g.

Printer screen is unreadable so can not use copy feature

Printer display is nothing but vertical bars of different shades of grey and widths. Therefore I cannot use the copy function. Well actually I can by guessing where to touch the scan function and number of copies. Since the display is unreadable I can print and scan from PC but not copy.
Is there a way to control (use) the "copy" function from my PC?

Hi @bartie2,
You can not copy from the PC, but you could scan, then print.
With regards to the condition of the screen, do you have the printer connected directly to a wall outlet or is it in a surge protector or power bar? Even if you have been using a surge protector/power bar all this time and you feel it is not the cause, please connect it to a wall outlet just so we can eliminate the power source as the root cause. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector
In this document you will see, ISSUE: Problems or issues may arise when an HP LaserJet series printer is connected to an uninterruptible power supply (UPS), a power strip, or a surge protector
^ This is not limited to Laserjet printers.
Let's perform a hard reset. To do so, leave the printer on and unplug the power cable for 1 minute. While it is unplugged, hold down the power button on the printer for 10-15 seconds to release any built up power, then after the minute has passed, plug the printer back in.
I hope that if you can not get the screen working, that scan then print is a viable work around for you to make copies.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Setting up Time Capsule as "Access Point" and not using router feature

I would like to use my Time Capsule as a wireless access point for a laptop. What settings in Airport Utility do I need to make?
Here's my setup:
Internet -> DSL Modem -> Linksys (wired) router -> Ethernet Switch -> Time Capsule.
Connect Using: Ethernet
Configure IPv4: Manually
IP address: 192.168.1.20
Subnet: 255.255.255.0
Router: 192.168.8.1
Connection Sharing: Off - Bridge Mode

Follow up to my question.
Got my laptop to access the internet via the Time Capsule. How? By having my ethernet switch connected to the WAN port of the Time Capsule - not the LAN port.
Internet ->DSL Modem -> Ethernet Switch -> Time Capsule (WAN port)
I noticed that makes it so computers on my wired LAN can't use 'Airport Utility' to access the Time Capsule. I have to move the ethernet cable from the ethernet switch to a Time Capsule LAN port, in order for my wired LAN computers to see my Time Capsule.
Is there a way, so I don't have to unplug from the Time Capsule WAN - to LAN port?

Can I use an external GPS Receiver via Bluetooth?

Great phone. I used a Galaxy Nexus for over a year until I got this phone, but once I started using the Z10, I never looked back. The "Hub" is a GREAT feature, exactly what I use most of the time. Oddly enough, I was never much of a BB fan until the Z10.
Anyhow, I have bought several apps and accessories for the Z10. I rely on my Z10 a lot.
I still have (from my old Windows Mobile 6 phone days back several years ago) a perfectly working external GPS receiver that has Bluetooth (Holux GPSlim236). Great little receiver.
Since I often use my Z10 for GPS nagigation (I am using Mireo DON"T PANIC) for directions whilst riding my motorcycle all day long, with Bluetooth enabled to my helmet, having the GPS radio on as well as Mobile (aka phone) and Bluetooth does drain the battery faster than if I could avoid using the internal GPS at this time (I still want to use the internal GPS at other times). I do have a data plan, so I could use the internal maps, however, I often ride through places with no data access (back country).
I was able to pair the Bluetooth GPS Receiver to the Z10 (easy enough), however, there is no option in the "Network Connections" settings area to be able to disable the internal GPS radio, or anywhere else, so I can't tell for sure that this is working (that is, not using internal GPS but using external GPS). I suspect it is not using the external GPS Receiver, though, since Bluetooth settings indicate "no services" for the external Bluetooth device.
Is there a way to sometimes use the external Bluetooth Receiver on the Z10 (in order to save battery on long trips)?
It is also not just for battery power savings, but also when I ride there is no air conditioning, so the phone does get hot, and I suspect would be cooler if I used an external GPS receiver via already-enabled-anyways Bluetooth.
Thanks

I am not sure my original message was clear.
I have th Z10, it has GPS software and a built-in GPS radio receiver. I also have an external GPS radio receiver, not a GPS device. It is strictly a radio receiver. I used to use it years ago on my Windows Mobile device - the software with maps was on Windows Mobile, and the GPS receiver hooked up via Bluetooth.
The GPS receiver in the Z10 uses the Z10 battery. I have the Bluetooth on anyhow to connect to my helmet headset. Since Bluetooth is on already, I could save Z10 battery by using the external GPS radio receiver (disable the internal GPS radio receiver), thought the map software would still run on the Z10.
So, the previous response says "does have GPS profile" but also says "external GPS will not work:".
I am not sure the statement was respect to my setup.
What I really need is for the Z10 Bluetooth to see the external GPS receiver, perhaps as a serial device or as a GPS device, howsoever such things work, and for the GPS map software to use the external rather than try to use the internal (the map software should not really care, it should be the OS that virtualises the GPS port).

Unsing RequestOneWayBean with Do Not Use SOAP Envelope

HI All ,
I have a requriement where Ecc is calling PI with an Asyn Proxy and PI calls a Sync Webservice and gets the Response back and sends the response back to ECC in Async manner . (Async - Sync Bridge).
I need to call aWeb Service which required specifc SOAP Headers . SO I have created a Custom Structure via XSLT mapping and calling the Web Service with the Option Do Not Use SOAP Envelope as checked . I have also used the RequestResponse Bean & ResponseOneWay Bean in the SOAP Receiver adapter to make the call from Sync to Asyn. When I execute the Interface the response from the Web Service is not flowing into PI .
I am getting the error "Exception caught by adapter framework: InterfaceDetermination did not yield any actual interface" .
Has anyone worked on the ResponseOneway Bean with parameter "Do Not Use SOAP Envelope as checked" . Can some one please help me out with this issue..
Thanks
Regards
NIlesh Taunk.

HI Eng ,
I have not been able to accept the SOAP Fault Response. The link that you have provided above works for accepting the SOAP Fault . But in my case the SOAP Receiver Adapter has the Option "DO NOT Use SOAP Envelope " checked . So it is still not working in my case .
I have made all the Configurations in the Receiver SOAP adapter but am unable to get the fault response back .
Please find below the Screenshot of the Receiver SOAP Adapter.
Im my case I am able to receive the successfull response in my Response Mappping (I have created a diff ICO for Response Message and a diff ICO for Fault Message). When a fault is received even the Fault message goes to the response mapping and it fails in the response mapping as the fault structure & the response structure do not match .
Do we need to make some additional configuration for the handing faults, whn the option "DO NOT use SOAP envlope is checked" as it removed the Env from the messgaes.
Am I missing something, would you be able to have a look.
Thanks
Regards
Nilesh Taunk.

SOAP Adapter: DO not use soap envelope

Hi Guys
I have a scenario, which calls a webservice from my ABAP Proxies, the twist in this is that SOAP request expects license info into the header of SOAP envelope, I could achive this by XSLT mapping in the receiver SOAP adapter I selected the option "Do not use SOAP envelope" and could do the call.
Due to this the response received from the webservice is treated as payload, as shown below...
response message payload:
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<Header xmlns="http://schemas.xmlsoap.org/soap/envelope/">
 <SubscriptionInfo xmlns="http://ws.strikeiron.com">
 <LicenseStatusCode>0</LicenseStatusCode>
 <LicenseStatus>Valid license key</LicenseStatus>
 <LicenseActionCode>0</LicenseActionCode>
 <LicenseAction>Decremented hit count</LicenseAction>
 <RemainingHits>18</RemainingHits>
 <Amount>0</Amount>
 </SubscriptionInfo>
</Header>
<soap:Body>
 <getRateResponse xmlns="CurrencyRates">
 <getRateResult>44.945</getRateResult>
 </getRateResponse>
</soap:Body>
</soap:Envelope>
and when i am trying to do the response mapping, it is not able to read the value.
Anyone having any idea, on how we could do this.
Thanks
Dheeraj

Hi
I am sorry for replying in so late, was busy with some projects.
I got few mails and this post is cathing up again, so thought of giving the solution I followed without any adapter module or anything, simple plain XSLT mapping.
Integration Repository
1. Created data type and message type for Outbound Interface
2. Imported the WSDL
3. Created an XSD out of the sample response I got by calling the WSDL (this you can do from any tool available, i used the strikeiron website), pls refer below to see the XSD below, and you will have to use the message type envelope from it.
4. Most Important step, created 2 XSLT mappings, one for request and the other for response., Pls refer below for both these mappings.
5. did the interface mapping
Integration Directory
1. pls configure your scenario as normaly you do, and while you configure the communication channel for your soap receiver, make sure you click on the do not use soap envelop option.
thats it done.
XSLT Request Mapping
<?xml version="1.0"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
 <xsl:template match="/">
 <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
 <SOAP-ENV:Header>
 <LicenseInfo xmlns="http://ws.strikeiron.com">
 <RegisteredUser>
 <UserID>xyz</UserID>
 <Password>xyz</Password>
 </RegisteredUser>
 </LicenseInfo>
 </SOAP-ENV:Header>
 <SOAP-ENV:Body>
 <getConversion xmlns="CurrencyRates">
 <FromCurrencyCode>
 <xsl:value-of select="//fromCurrency"/>
 </FromCurrencyCode>
 <ToCurrencyCode>
 <xsl:value-of select="//ToCurrency"/>
 </ToCurrencyCode>
 <Amount>1</Amount>
 </getConversion>
 </SOAP-ENV:Body>
 </SOAP-ENV:Envelope>
 </xsl:template>
</xsl:stylesheet>
XSLT Response Mapping
<?xml version='1.0' ?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:a="CurrencyRates" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
 <xsl:template match="/">
 <ns0:MT_Cur_res xmlns:ns0="http://www.april.in/WebService/SOAPHeader">
 <Rate>
 <xsl:value-of select="soap:Envelope/soap:Body/a:getConversionResponse/a:getConversionResult"/>
 </Rate>
 </ns0:MT_Cur_res>
 </xsl:template>
</xsl:stylesheet>
Webservice Response XSD
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified" targetNamespace="http://schemas.xmlsoap.org/soap/envelope/" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="http://ws.strikeiron.com" xmlns:ns2="CurrencyRates">
<xs:import namespace="CurrencyRates" schemaLocation="ns2.xsd"/>
<xs:import namespace="http://ws.strikeiron.com" schemaLocation="ns1.xsd"/>
<xs:element name="Envelope">
 <xs:complexType>
 <xs:sequence>
 <xs:element ref="soap:Header"/>
 <xs:element ref="soap:Body"/>
 </xs:sequence>
 </xs:complexType>
</xs:element>
<xs:element name="Header">
 <xs:complexType>
 <xs:sequence>
 <xs:element ref="ns1:SubscriptionInfo"/>
 </xs:sequence>
 </xs:complexType>
</xs:element>
<xs:element name="Body">
 <xs:complexType>
 <xs:sequence>
 <xs:element ref="ns2:getConversionResponse"/>
 </xs:sequence>
 </xs:complexType>
</xs:element>
</xs:schema>
let me know in case somebody gets stuck somewhere for this scenario.
Take Care
Dheeraj

SOAP scenario "Do not use SOAP Envelope" check problems

Hi Gurus!
I'm again here.
I've an scenario with SOAP Receiver, the WS do I need consume, looks like:
POST /SumTotalws1/services/Authentication.asmx HTTP/1.1
Host: xxx.xxx.xxx.xxx
Content-Type: text/xml; charset=utf-8
Content-Length: length
SOAPAction: "http://www.sumtotalsystems.com/sumtotal7/sumtotalws/Authentication/Login"
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Body>
 <Login xmlns="http://www.sumtotalsystems.com/sumtotal7/sumtotalws/Authentication/">
 <credentials>
 <Username>string</Username>
 <Passcode>string</Passcode>
 <AuthenticationType>NotSpecified or Anonymous or NTAuthentication or Passport or LDAP</AuthenticationType>
 <AccountType>NotSpecified or WebService or WebUI</AccountType>
 </credentials>
 </Login>
</soap:Body>
</soap:Envelope>
but the response looks like:
HTTP/1.1 200 OK
Content-Type: text/xml; charset=utf-8
Content-Length: length
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Header>
 <UserToken xmlns="http://www.sumtotalsystems.com/sumtotal7/sumtotalws/">
 <Value>string</Value>
 </UserToken>
</soap:Header>
<soap:Body>
 <LoginResponse xmlns="http://www.sumtotalsystems.com/sumtotal7/sumtotalws/Authentication/" />
</soap:Body>
</soap:Envelope>
when I create my communication channel with "Do not Use SOAP Envelope" uncheck it, all run ok, but I only get in response message "<LoginResponse>" and I need <UserToken>
When I check it "Do not use SOAP Envelope" and I use XSLT mapping to add SOAP Env to request message, I get response message empty.
I tried the web Service with the message that I obtained from de XSLT mapping in the program SOAPUI. I get ok response with the <UserToken> value.
some idea to solve this problem??
Thanks in advance.
Edited by: KrlosRios on Sep 30, 2011 8:07 PM

Hi, thanks for your answer.
Can I use AXIS to execute any WS?
The WS that I tried execute looks like this:
POST /xxxx/services/Authentication.asmx HTTP/1.1
Host: xxx.240.106.39
Content-Type: text/xml; charset=utf-8
Content-Length: length
SOAPAction: "http://xxx/Authentication/Login"
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Body>
 <Login xmlns="http://xxxxAuthentication/">
 <credentials>
 <Username>string</Username>
 <Passcode>string</Passcode>
 <AuthenticationType>NotSpecified or Anonymous or NTAuthentication or Passport or LDAP</AuthenticationType>
 <AccountType>NotSpecified or WebService or WebUI</AccountType>
 </credentials>
 </Login>
</soap:Body>
</soap:Envelope>
and for the response:
HTTP/1.1 200 OK
Content-Type: text/xml; charset=utf-8
Content-Length: length
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Header>
 <UserToken xmlns="http://www.sumtotalsystems.com/sumtotal7/sumtotalws/">
 <Value>string</Value>
 </UserToken>
</soap:Header>
<soap:Body>
 <LoginResponse xmlns="http://www.sumtotalsystems.com/sumtotal7/sumtotalws/Authentication/"></LoginResponse>
</soap:Body>
</soap:Envelope>
also I found in Trace node in SXI_MONITOR, jus before execute response mapping :
<Trace level="1" type="B" name="PLSRV_MAPPING_RESPONSE"></Trace>
<Trace level="1" type="Timestamp">2011-11-01T19:33:34Z UTC-6 Start of pipeline service processing PLSRVID= PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification... </Trace>
<Trace level="3" type="T">PLSRVTYPE = </Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_MAPPING_XMS_PLSRV3</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL"></Trace>
<Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV"></Trace>
<Trace level="2" type="T">......attachment XI_Context not found </Trace>
<Trace level="3" type="T">Das Mapping wurde bereits in der Interface-Ermittlung bestimmt. </Trace>
<Trace level="3" type="T">Objekt-Id des Interface-Mappings 8594D8C2E6DA3C008F45B112FFCC86B8 </Trace>
<Trace level="3" type="T">Versions-Id des Interface-Mappings C3BB8FB0A1D511E0A688E9FCB9F06E16 </Trace>
<Trace level="1" type="T">Interface-Mapping http://xxxxx.net/pi/lms/Authentication OM_LMS_Authentication </Trace>
<Trace level="3" type="T">Mapping-Schritte 1 XSLT Response_LMS_Auth5 </Trace>
<Trace level="3" type="T">MTOM-Attachments werden nicht in die Payload überführt. </Trace>
<Trace level="1" type="T">Payload is empty. </Trace>
<Trace level="3" type="T">Dynamische Konfiguration ist leer. </Trace>
<Trace level="2" type="T">Modus 0 </Trace>
<Trace level="2" type="T">Call XSLT processor with stylsheet Response_LMS_Auth5.xsl. </Trace>
<Trace level="3" type="T">Method fatalError called, terminate transformation, because of
Thrown:
javax.xml.transform.TransformerException: java.io.IOException: Parsing an empty source. Root element expected!
 at com.sap.engine.lib.jaxp.TransformerImpl.transform(TransformerImpl.java:250)
Say Payload is empty.
and in left directory tree, not exist "payload" node, only existe SOAP Body and in "Manifest" node looks like this:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Manifest wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<SAP:Payload xlink:href="cid:att-60c3078b066911e1bc1500000093b25a @sap.com">
<SAP:Name>MainAttachment</SAP:Name><
SAP:Description>Main document</SAP:Description>
<SAP:Type>Application</SAP:Type></SAP:Payload>
</SAP:Manifest>
Thanks for your help.

Do not use SOAP envelope

I have a scenario in which a Webservice is called from PI; as the webservice request some specific fields in the SOAP-header I have found that I should check the "Do not use SOAP envelope" option in the SOAP-receiver channel.
I have searched the forum/SDN for examples of how to create the SOAP envelope including the required header fields. I have found some posts refering to XSLT-mapping; however I'm not famliar with XSLT so I'm looking for an example or guide how to create the SOAP envelope for this scenario.
Can anybody be of assistance?
Kind regards,
John.

Here is a sample of an xlst I used for this purpose.
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsl:stylesheet version="1.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match="/">
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Header/>
<soapenv:Body>
 <p262:operationName xmlns:p262="http://othersite.com">
 <xsl:apply-templates/>
 </p262:operationName>
</soapenv:Body>
</soapenv:Envelope>
</xsl:template>
<xsl:template match="shippingOptions">
 <shippingOptions>
 <xsl:apply-templates select="destination" />
 <equipmentId><xsl:value-of select="equipmentId"/></equipmentId>
 <xsl:apply-templates select="origin" />
 </shippingOptions>
</xsl:template>
<xsl:template match="destination">
 <destination>
 <countryCode><xsl:value-of select="countryCode"/></countryCode>
 <postalCode><xsl:value-of select="postalCode"/></postalCode>
 </destination>
</xsl:template>
<xsl:template match="origin">
 <origin>
 <countryCode><xsl:value-of select="countryCode"/></countryCode>
 <postalCode><xsl:value-of select="postalCode"/></postalCode>
 </origin>
</xsl:template>
</xsl:stylesheet>

How to capture SOAP fault when using "Do not use SOAP envelope" parameter

Hi,
we have a synchronous RFC -> XI -> Web Service scenario. The Web Service requires some custom SOAP header elements for user authorization which forced us create the entire SOAP message in a message mapping and to set the "Do not use SOAP envelope" parameter in the receiving SOAP adapter.
In order to capture the SOAP fault message from the Web Service we have created a message interface with a fault message and also created an interface mapping with a fault message mapping.
Our problem is that the fault message is not populated when we get a SOAP fault message back from the Web Service. Is this due to the fact that we have set the "Do not use SOAP envelope" parameter?
Thanks in advance!
Stefan
Message was edited by:
Stefan Nilsson

Hi Bhavesh,
I have exaactly same scenario. But the only difference is that the Successful payload is also not coming into PI.
The request is successfully hittng the webservice.
Please guide me on how to capture the paylod.
I am using the WSDL provided by the thirdparty but sill the message is not coming into PI.

Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB hard drive and only 120GB Macbook. It worked fine before the latest Maverick's

Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB external hard drive and only 120GB Macbook. It worked fine before the latest Maverick's update. Any help would be greatly appreciated.

My guess would be it has created an entirely new backup of your drive when you upgraded to Mavericks.
See Here: http://pondini.org/TM/1.html
And here: http://pondini.org/TM/9.html
Peruse the whole site. There is a lot of information there.

Sorry, we couldn't open your file using this feature. Visio Web Access is not available on this site.

Recently installed Service Pack 1 in SharePoint Server 2013 Farm, post upgrade we are experiencing issue when opening visio documents:
I am trying to open .vsdx (visio 2013) file but encounter following issue:
Sorry, we couldn't open your file using this feature. Visio Web Access is not available on this site.
Under Document library-->Library settings-->Advanced Settings
Still I cant open file in browser as we always used to. Unfortunately we don't have Visio services in Farm.
can you share your experiences regarding this issue post Sp1 SharePoint Server 2013.
Thank You

Hi Octopus,
Based on the error message, it seems that the Visio Graphics Service is not started or the Enterprise feature is not enabled.
I recommend to check the things below:
Go to Central Administration > System Settings > Manage service on server > check if the Visio Graphics Service is started > then click Application Management > Manage service applications > check if the Visio Graphics Service application
is created.
Go to the root site settings page of the site where you got this error, click Site collection features to check if the SharePoint Server Enterprise Site Collection Features is enabled.
Go to the site settings page of the site where you got this error, click Manage site feature to check if the SharePoint Server Enterprise Site Features is enabled.
More information about the Visio Graphics Service:
http://tutorial.programming4.us/windows_server/microsoft-sharepoint-2013---looking-at-visio-services-(part-3)---visio-graphics-service-service-application.aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support

"Do Not Use Envelope" feature: WS Receiver vs Soap Receiver

Similar Messages

Maybe you are looking for