STP very, VERY unstable for projects 45min DO NOT use for feature films

My mac has crashed nearly 50 times while using STP editing audio for a feature film. It simply isn't ready for primetime and its really bad. I've done all the troubleshooting tips (deleting preference files, cache files, etc.)
I would wholeheartedly suggest anyone look elsewhere if you have a large project. Digital Performer, etc. just anything other than STP

I've been using STP for almost five years for my podcast. Early on I discovered that, depending upon settings, I couldn't record more than a certain length without major issues. Essentially, the recording would get lost in a kind of crazy quilt of short patches. Cutting the file in two and then splicing together after editing usually fixed the issue.
These days, for example, recording at 96/24, I can get close to an hour and a half without any trouble. Usually I record less than an hour and a quarter, so I'm fine.
Otherwise, my sense is that STP has gotten more stable over time, though it's still plenty buggy.
g.

Similar Messages

No video output option at movie project setting can not use my blackmagic video card

no video output option at movie project setting can not use my blackmagic video card

There's no change if I hold command-R to boot into recovery. The mac chimes on powerup but nothing else seems to happen.
The machine has an SSD drive in it so I can't even listen to hear if it is loading anything or acting differently when I try different keypresses.
As I had some spare RAM lying around, I've tried swapping that in but no change there either. I still suspect it's a software rather than hardware problem, but without any way to control the boot up, I'm not sure how I can fix it.
I do have remote time machine backups - is there any way of restoring these manually, perhaps by removing the drive from the mac and copying the backup data over using another system? (Unfortunately I don't have any other mac systems to experiment with this, though)

MS Project Very Slow and Project Files Large when Using Shared Resource Pool

Hello,
We are using MS Project 2010 Professional in our organization and using a shared resource pool so we can easily identify resource conflicts. When we started this process many months ago the resource pool worked great. Now that we have nearly
all of our projects (~40) using the resource pool, it has become essentially unusable. Each project file that is sharing the resource pool is 12 MB or greater in file size, and most of the project files contain less than 100 lines. Saving any file
takes ~4 minutes. As a result, many of the resource managers and project managers are starting to avoid using MS Project which is undermining our original intent.
Any thoughts on what we could try to regain the usability, make the file sizes smaller, improve save times, etc.? Will MS Project Server fix all of these issues?
Thanks,
Josh

If any of your PMs renamed, moved or over-wrote their project file whilst linked to the Resource Pool or a master, then the file may well have corrupted itself or the pool or both. With 40 files, you can guarantee one or more PMs will do one of the above,
so file corruption is a when, not if (2days or 2 years or more).
For 40 projects Project Server or any solution that copies data to a database so the resource data can be consolidated is needed. Project Server is not a simple application, it's a full server and requires proper training and processes to add value. And
it needs configuring by someone who knows what they're doing!
In the mean time try unattaching all project files from the pool, then create a new blank pool and re-attach.You will also need to File, Save as to repair each project file if needed. For bad corruption save as to a .xml format then re-import to a blank
project.
Or, create a new master each time by inserting all projects into a new blank project, but deselecting the Link option. All tasks are then copied and the resource data consolidated. Record a macro to make creating this very quick and easy (provided your network
isn't too slow).
<p>Rod Gill</p> <p><a href="http://www.project-systems.co.nz/project-vba-book/index.html/">The one and only Project VBA Book</a> <a href="http://www.project-systems.co.nz/"></p> <p>Rod
Gill Project Management</a></p>

Workflow suitable for Feature Film edit?

Hi.
I work for a company that specialises in hiring large Avid systems to feature film projects.
In that environment, we have a number of editors and assistants each with their own machine hooked up to a central lanshare or unity. They can all open the same (main) project at the same time and all digitise / capture at the same time or while others are busy cutting - as soon as someone closes a bin, its updated contents are available to the rest of the team.
I know that multiple FCP machines cannot use the SAME project file at the same time. And I know that FCServer must have project files checked in / out. I also know that media captured is associated to the project that it was captured to.
So how to people use FCP for this type of team effort. On a movie, there are usually five or so people working on the same project and they all need to be able to capture if they need to (and have that media accessible to all asap), and be able to look at (or work on) each others' sequences at the drop of a hat.
With Avid this is all very mature and there are systems in place for this kind of collaborative workflow. Hows it work with FCS? How do you guys manage a single project that is being worked on by five different guys?
Any help is very welcome!

@Studio X:
I have not walked into anybody's office and asked for free advice, I have gone to a place that is specifically allocated as a place to share ideas and knowledge.
Secondly this is not a contractor speaking to an architect, as you put it; a better analogue is an architect asking another architect for advice.
Now I admit you are right, some architects would not give advice to 'the competition' as they might see this as undermining their business. I, however, am of the opinion that the sharing of knowledge creates valuable alliances, and for me this is a given when the two parties are not competing for the same client. In any event, this approach has not hurt our business (quite the contrary).
Anyway. Its simply two different points of view.
I am surprised though that you find my outlook curious! In what way?
@Shawn:
Thanks for the links. I appreciate the effort.
@RedTruck:
Thanks mate, but the features we are involved in don't work like that. In terms of the post team, they have a very well rehearsed working relationship. We are not hired to tell them how to do their job; they tell US how they want to work and we design the systems to do it. In this instance they have asked for the system to run FCP which is very unusual, its usually Avid. But they have Oscars and I don't, and its their money, so I'm not going to argue!
I do think though that we will just do what we always do; and that is purchase the kit, get it in the workshop and figure it out for ourselves. With a whole bagful of testing!
Thanks everyone for your input.
Dom.

PP CC 2014.0.1 (WIN) very unstable for unknown reasons

hey folks,
running on a:
- HP Z820
- 96GB RAM
- Nvidia Quadro 6000
- 16TB RAID SAS
- windows 7 proffessional
since the 14.0.1 update i've noticed that PP is not responding properly. takes ages to load up the media, several crashes for no apparent reasons, can't shuttle the timeline.
also when the program crashes it takes ages until you can force-quit the process.
trashed the prefs, emptied the media cashe, the preview files - nothing seems to help.
uninstalled the whole suite, used the cleaner tool afterwards, reinstall - same situation.
checked the RAID (contains the video data) - works like a charm.
this way in cannot use the software properly.
anyone having similar issues?
any input welcome.
best
sebastian.

hey folks,
running on a:
- HP Z820
- 96GB RAM
- Nvidia Quadro 6000
- 16TB RAID SAS
- windows 7 proffessional
since the 14.0.1 update i've noticed that PP is not responding properly. takes ages to load up the media, several crashes for no apparent reasons, can't shuttle the timeline.
also when the program crashes it takes ages until you can force-quit the process.
trashed the prefs, emptied the media cashe, the preview files - nothing seems to help.
uninstalled the whole suite, used the cleaner tool afterwards, reinstall - same situation.
checked the RAID (contains the video data) - works like a charm.
this way in cannot use the software properly.
anyone having similar issues?
any input welcome.
best
sebastian.

Exchange 2013 - outlook in LAN environment very slow upload but fast download - not using 'use cached exchange mode'

Hi,
I have Exchange 2013 setup in a new environment (no migration) and it is working great except I just realized there is a big problem.
I notice the following
Problem 1:
Outlook 2010 with sp2 with cached exchange mode on: when I import the pst into outlook, it imports fine but the sync is extremely slow. It uploads to the Exchange 2013 mail server at 20-70KB/sec (bytes) via LAN.
Problem 2:
Outlook 2010 with sp2 with cached exchange mode off: when I import the pst into outlook, it imports extremely slow. It uploads to the Exchange 2013 mail server at 20-70KB/sec (bytes) via LAN.
More info:
-user1 has 1GB of mail and when setting up the user on a new pc with outlook with cached exchange mode on, it downloads the mail very fast. It downloads at 40-80 Mbps/sec (bits).
-I have Exchange 2013 with CU3 with win2k12 non r2.
Why is the download so fast from Exchange 2013 but the upload to Exchange 2013 is extremely slow? How do I fix this?
Thanks

I did some more testing.
I setup a test environment with:
-Exchange 2013 SP1 on win2k12 r2
-Outlook 2010 SP2 on windows 7 sp1
-Outlook 2010 SP2 on windows 8.1
-Outlook 2013 SP1 on windows 8.1
Both windows 7 and windows 8.1 have the very slow upload issue to Exchange 2013. Windows 7 upload to Exchange 2013 is around 20-70KB/sec (bytes) via LAN. Windows 8.1 upload is a bit more responsive at around 500-600KB/sec (bytes) via LAN.
I changed the TcpAckFrequency to 1 for windows 7 and 8.1 and the problem went away. The upload on both Windows 7 and 8.1 was going at megabytes after the change.
I hope Microsoft fixes this soon.
PowerShell script to have this automated via GPO:
http://community.spiceworks.com/topic/571571-outlook-slow-after-migrating-to-exchange-2013
PowerShell Script:
$strGUIDS=[array](Get-WmiObject win32_networkadapter -filter "netconnectionstatus = 2" | select -expand GUID)
foreach ($strGUID in $strGUIDS) {New-ItemProperty -path HKLM:\System\CurrentControlSet\services\Tcpip\Parameters\Interfaces\$strGUID -propertytype DWORD -name TcpAckFrequency -value 1}

Creating Subtitles for Feature Film Documentary

I am finishing up editing work on a Brazil documentary, and I am looking for the best advice in adding subtitling in FCP. In searching the forums, I have came across this,
_*http://www.belle-nuit.com/subtitler/index.html*_
Is this a better way to create subtitles other then just creating a text layer in FCP and creating a text block through the text generator for every line of text?
Is NOT recommended to create subtitles in FCP because it will embed them into the video once exported?
My main question is, what is the best way to create subtitles for a feature length film that is edited in Final Cut?
Appreciate any advice as our deadline is coming!
Thanks,
ben
Message was edited by: Cinematographer NW

I just looking for the best option now, before we start the final subtitling, so that we don't shoot ourselves in the foot. < </div>
That would be to create a standardized .smi file that can be read by many different subtitle applications.
Looking for a method that will give us the best options for distributing the film. Not having to re-do the entire output of the film to change languages, re-edit subtitling.< </div>
Umm, how exactly would you release the project in three different languages without creating three different versions? Or at least three different subtitle files?
Would that link I previously posted, or even using DVD SP give the best option, just dropping in a different DVD SP title stream? < </div>
DVD is a terrible way to deliver subtitles, IMO. Just bring one home and watch it. But there's a huge difference between open and closed subs and open and closed captioning, too.
There is no best solution that applies to all distribution media. You must decide on the delivery format and then work backwards.
I offer these as helpful places to visit (there are hundreds more!):
http://www.captionmax.com/faqTechProb.php
http://www.ccaption.com/nccwork.shtml
http://www.robson.org/capfaq/
http://www.channel4.com/corporate/4producers/resources/documents/ForeignLanguage SubtitlingGuidelinesJan06.pdf
bogiesan

SH %LICMGR-3-LOG_LIC_FILE_MISSING: License file(s) missing for feature LAN_ENTERPRISE_SERVICES_PKG

Hello,
I have a log file that tells that the license file is missing for LAN_ENTERPRISE_SERVICES_PKG, but I do not use any feature of that package
NX3k# sh feature | include ena
lldp                  1         enabled
private-vlan          1         enabled
sshServer             1         enabled
tacacs                1         enabled
telnetServer          1         enabled
The log file:
SH %LICMGR-3-LOG_LIC_FILE_MISSING: License file(s) missing for feature LAN_ENTERPRISE_SERVICES_PKG
NX3k# sh license usage
Feature                      Ins Lic   Status Expiry Date Comments
                                 Count
LAN_BASE_SERVICES_PKG         Yes   -   Unused Never       -
LAN_ENTERPRISE_SERVICES_PKG   Yes   -   Unused Never       license missing
**** WARNING: License file(s) missing. ****
I would very appreciate if someone can help to disable the
LAN_ENTERPRISE_SERVICES_PKG
Regards,
Egor.

I found the solution. There is open bug regarding the issue.
CSCtz91348 - LIC_FILE_MISSING: log after ".lic" file lost in SPROM
https://www.cisco.com/cisco/psn/bssprt/bss?searchType=bugIdfilterData&bugId=CSCtz91348&filterData=EMPTY&QueryString=nexus%203000%20license%3Fst=kw&highLight=true&searchCriteria=nexus%25203000%2520license&isadvancedpage=false&SavedSearchType=false&advkeywords=&page=bstBugDetail&sortedCol=bugId&sortedDir=descending
Maybe it will help somebody.
Egori4.

Very unstable book created with the DPS

We have created a book of some 450 pages.
The fact is that is very very unstable with the ipad (content viewer)
Anyone know if stability is improved when the App is created or is it similar?
The book holds few seconds from a time is closed, it is totally useless.
We have a presentation within a few days with the client, we are desperate,
because it is a project we've worked for months ... and now not much.
Someone is just like us?
There is a possible solution?
Someone can give us any help or hint?
THANKS

Hello again,
Within a script-enabled Web content based on jQuery.
Basically it is a system of Sliders, namely RoyalSlider can be found in codecanyon.net.
This module allows slide pictures with your finger.
Now we're re-creating the entire book with the system moving images offered by the DPS.
But the user experience will be much poorer.
Thanks for everything

My iPad 1 is now very unstable. Apps crash consistently, Mac Numbers/Pages etc incompatible with IOS 5.1 etc. There seems to be no backwards compatibility to iPad 1. Am I just supposed to throw it away? I have restored the iPOad and it has ample storage .

My iPad 1 is very unstable. Many Apps simply crash after opening. There is ample storage available.I have restored the iPad twice now and still it is unstable.
Is this a lack of backwards compatibility because no-one writes apps for IOS 51.1. and the original iPad anymore? not even Apple, as the documents and sheets I create on my Mac are incompatible with my iPad now.
My naievete tells me that this is simply Apple expecting us to upgrade to later levels of hardware. If so, very disappointing for an Apple fan. Seems your App developer approvals (even your own apps) do no require compatibility with anything but IOS 6 or later.

There are various things to make your iPad more stable. You can try deleting all apps from the multitasking bar; do a reset ie hold the power and home buttons simultaneously until the Apple logo appears; Settings > General > Reset all Settings.
If you had the previous version of iPages (version 09) on your Mac before upgrading to Pages 5.2, your Mac should still have that version in Applications, which is still compatible with your version of Pages on your iPad.
If you don't have that version, you can 'Export to Pages 09' which is still compatible with iOS 5.1.1.

Computer randomly shuts down/Very unstable since upgrade to yosemite

Since upgrading to yosemite my computer has become very unstable.
For anyone that can help with what may be causing this issue I would really
appreciate it. As for "Adobe" being a possible cause, how can I determine
which Adobe program and related files are the culprit?
Thank you very much to anyone who offer's their support and help.
EtreCheck version: 2.1.8 (121)
Report generated February 10, 2015 at 12:59:00 PM MST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Early 2011) (Technical Specifications)
    MacBook Pro - model: MacBookPro8,1
    1 2.3 GHz Intel Core i5 CPU: 2-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1333 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1333 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 209
Video Information: ℹ️
    Intel HD Graphics 3000 - VRAM: 384 MB
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.10.2 (14C109) - Time since boot: 0:9:57
Disk Information: ℹ️
    Hitachi HTS545032B9A302 disk0 : (320.07 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 318.84 GB (62.33 GB free)
            Core Storage: disk0s2 319.21 GB Online
    MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
    Apple Computer, Inc. IR Receiver
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Configuration files: ℹ️
    /etc/hosts - Count: 15
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Library/Application Support/Roxio
    [not loaded]    com.roxio.TDIXController (1.7) [Click for support]
        /System/Library/Extensions
    [loaded]    com.manycamllc.driver.ManyCamDriver (0.0.9 - SDK 10.5) [Click for support]
    [not loaded]    com.paceap.kext.PACESupport (5.4) [Click for support]
    [not loaded]    com.paceap.kext.PACESupport2 (5.4) [Click for support]
    [loaded]    com.rim.driver.BlackBerryUSBDriverInt (0.0.74) [Click for support]
    [not loaded]    com.rim.driver.BlackBerryUSBDriverVSP (0.0.74) [Click for support]
    [not loaded]    com.symantec.kext.ips (1.3.1f6) [Click for support]
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [not loaded]    com.adobe.CS5ServiceManager.plist [Click for support]
    [not loaded]    com.epson.eventmanager.agent.plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [not loaded]    com.rim.BBAlbumArtCacher.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.adobe.SwitchBoard.plist [Click for support]
    [loaded]    com.google.keystone.daemon.plist [Click for support]
    [loaded]    com.macpaw.CleanMyMac2.Agent.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    [failed]    com.parallels.mobile.kextloader.launchdaemon.plist [Click for support]
    [running]    com.rim.BBDaemon.plist [Click for support]
    [running]    com.smithmicro.schedulerdaemon.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [failed]    com.avast.home.userinit.plist [Click for support]
    [loaded]    com.divx.agent.postinstall.plist [Click for support]
    [not loaded]    com.facebook.videochat.[redacted].plist [Click for support]
    [loaded]    com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Click for support]
    [loaded]    com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Click for support]
    [not loaded]    com.smithmicro.cleaning.schedulermailer.plist [Click for support]
User Login Items: ℹ️
    Google Chrome    Application Hidden (/Applications/Google Chrome.app)
    BlackBerry Device Manager    Application (/Library/Application Support/BlackBerry/BlackBerry Device Manager.app)
Internet Plug-ins: ℹ️
    FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    DivXBrowserPlugin: Version: 2.2 [Click for support]
    o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
    Google Earth Web Plug-in: Version: 7.1 [Click for support]
    googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
    JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
Safari Extensions: ℹ️
    Open in Internet Explorer
    DivX Plus Web Player HTML5 <video>
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Mobile backups: ON
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 318.84 GB Disk used: 256.51 GB
    Destinations:
        Data [Network]
        Total size: 3.00 TB
        Total number of backups: 30
        Oldest backup: 2014-12-22 10:14:08 +0000
        Last backup: 2015-02-10 02:49:48 +0000
        Size of backup disk: Excellent
            Backup size 3.00 TB > (Disk size 318.84 GB X 3)
Top Processes by CPU: ℹ️
         7%    WindowServer
         1%    Google Chrome
         0%    opendirectoryd
Top Processes by Memory: ℹ️
    129 MB    Google Chrome
    103 MB    Safari
    90 MB    WindowServer
    73 MB    Spotlight
    64 MB    Finder
Virtual Memory Information: ℹ️
    81 MB    Free RAM
    1.50 GB    Active RAM
    1.41 GB    Inactive RAM
    1.05 GB    Wired RAM
    1.66 GB    Page-ins
    21 MB    Page-outs
Diagnostics Information: ℹ️
    Feb 10, 2015, 12:42:48 PM    Self test - passed
    Feb 9, 2015, 05:23:10 PM    /Library/Logs/DiagnosticReports/mdworker_2015-02-09-172310_[redacted].crash

A number of problems exist including the likelihood of system corruption as a result of using CleanMyMac.
It is not reasonable to expect a Mac to operate normally after using CleanMyMac. Like many ill-conceived "cleaning" utilities, it is capable of corrupting a Mac to the point that erasing it completely is the only practicable means of recovery. CleanMyMac is not the only example; it is merely popular due to marketing strategies that are as effective as they are intrusive.
There is no practicable way to reverse the effects of having used CleanMyMac2 other than to reinstall all affected files from backups or their original sources. Its developer's uninstallation instructions are ineffective despite their recent claims to the contrary. Only MacPaw, its developer, can know the reason for that, but I can think of two possibilities: either they are purposefully leaving components behind for reasons known only to them, or they simply don't know what they're doing. Neither one of those possibilities is particularly comforting for the user.
Reinstalling OS X alone will have no effect on either removing CleanMyMac or reversing the damage it is capable of inflicting upon a system.
Besides CleanMyMac2, garbage "cleaning" and "anti-virus" software exists, specifically "Avast", "Smith Micro", and "Symantec / Norton". Those products should not be installed on any Mac, because they convey no benefit and are only capable of creating or contributing to problems.
In addition, that Mac's Hosts file appears to have been modified. Fixing a modified Hosts file requires specific instructions. Apple Support Communities contributor and EtreCheck author etresoft recently added a User Tip discussing that concern, and how to correct it: Fixing a hacked /etc/hosts file
The recovery procedure that follows will obviate the need to correct all those separate problems and is likely to require the least amount of your time and interaction.
Follow the applicable recovery procedure below:
If you have a backup that you created prior to using CleanMyMac, now is the time to use it. For Time Machine, boot OS X Recovery, and at the Mac OS X Utilities screen, choose Restore from Time Machine Backup. Choose a date preceding the installation of CleanMyMac.
If you do not have a backup that predates the use of CleanMyMac, create one now. To do that read Mac Basics: Time Machine backs up your Mac.
The recovery procedure will require that you erase the Mac using OS X Recovery, and then create a new user whose contents will be empty. You will then be able to use Setup Assistant to migrate your essential documents including photos, music, work products and other essential files.
When doing so, select only your previous User account and do not select "Applications", "Computer and Network Settings" or "Other files and folders". De-select those choices.
Subsequent to using Setup Assistant, you will need to reinstall the essential software you may require, once again remembering to install software only from their original sources, and omitting all non-essential software.
To erase and install Yosemite read: OS X Yosemite: Erase and reinstall OS X
To migrate your essential documents read: OS X Yosemite: Transfer your info from a computer or storage device and follow the procedure under Transfer info from a Time Machine backup or other storage device.

Iphone 4 running 4.3.5 wifi very unstable/will not connect to network

Hi all iPhone users. Im new to this so please bear with me. I have an iPhone 4 (had for about 1 month or so). I have recently updated to the new 4.3.5 software. Sice then, my wifi seems to be very very unstable. Im only about 10ft from my router and when I go to connect, I get an error saying 'unable to join network'. I previously had an iphone 3gs and that connected fine further away.
When my iphone 4 does connect, the connection lasts about 10-15 secs and then it will not load any web pages although it shows its connected. I have tried all methods on previous threads but nothing seems to work. Ive also tried retting my router and changing the wifi channel to make the signal stronger but nothing seems to work.
Ive seem some threads where people have 'put them in the freezer' but im not willing to do that as the phone is only a month old. Ive tried the network reset, the hard reset, re-installing itunes and trying the update again but it nothing seems to work.
Any help or advise would be much appreciated.
Thanks

Hi folks,
SOLVED
iPhone 4 wasn't having any joy (and neither was my new 4s).
Tried turning OFF the security on the router, connecting the iPhones (yep, they connected OK) then turning on the security (WPA2-PSK [AES]) and both iPhones still connected.
So, it looks like this is the way to solve a non-connecting iPhone 4/4s with a Netgear WiFi router.
Hope this helps others with the same problem.
Regards
RB

Premiere Pro CC 2014 Very Unstable

My CC2014 is very unstable since I have updated my Adobe Creative Cloud Software from CC to CC 2014, and I've been an adobe user since 1999 and I switched from FCP to Premiere in 2012. Everything has been great until the last two upgrades. What is going on???
My Premiere Pro has been very unstable. I can't keep it running for more than an hour before I receive the Premiere Pro has encountered a serious error and must shut down. I can't get anything done. I've gone from working 40 hours a week to 60 hours a week since I upgraded. This is extremely counter productive. Please HELP!!!!
I am experiencing difficulty with Illustrator a lot too, but not as important just wondering if somehow related.
System Info:
Creative Cloud 2014 Updated September 2nd, 2014 - Everyday I use; PP, AE, AU, IL, PS, ID.
Mac Pro Mid 2010
32 GB Ram
OS: 10.7.5
Processor: 2 x 2.4 GHz Quad-Core Intel Xeon

Hi chriscorrell,
Thank you for posting on Adobe forums.
Upgrading your OS might be a good idea because Premiere CC 2014's OS requirement is OS X 10.8.
See here: System requirements | Adobe Premiere Pro
Thanks,
Rameez

Has anyone noticed that Messages (iChat) is very unstable on OS 10.8.3?

I have a 27 inch iMac i5 with 4 GB of RAM. Since upgrading to OS 10.8.3, Messages (iChat) has become very unstable, freezing at least once or twice a day. This behavior is mainly associated with my sending iMessages to iPhone users. The problem is solved by force quitting and re-starting the app. The activity monitor shows the app to be consuming several hundred megabytes of memory when this happens, and the computer slows down considerably, but remains responsive. No other apps have become unstable.
My internet searches are too poorly worded to be of use--searching for "messages" or "ichat" does not yield any results or even any discussion of this kind of unstability. Any thoughts?

peteangus wrote:
Thank you all, a reset all settings cleared up the problem, however I have now lost all my wi-fi passwords.
If you reset all settings then your passwords for Wi-Fi will have been cleared. You will need to enter them again for each Wi-Fi network you connect to.

RoboHelp 10 is very unstable under Win7

Hi all,
using RH 10 under Win7 I noticed that the program is extremely unstable. It often crashes with only a very simple error message, telling that is searching for a solution but it never find one. Also the Windows Explorer crashes 10-20 times a day when working with RH. This is definitely linked to instaling the TCS4 on this system, and I have only been using RH and RSC yet.
Is thete anybody else with this issue, particularly the Explorer crash?
I found an older thread stating that RSC made Windows Explorer crash but this was related to RH7. Also there was no solution beyond deinstalling it.
Regards,
Robert

Hi,
I've been using RH10 since the beta builds on several computers, virtual machines and operating systems. I have not experienced any of the problems you encounter. I did, however, not use RSC. So that would point to RSC being the problem.
Do you use a 32-bit system or a 64-bit system? And do you have the same configuration on an XP machine?
Greet,
Willam

STP very, VERY unstable for projects 45min DO NOT use for feature films

Similar Messages

Maybe you are looking for