Do we need gcc compiler (prereq packages for linux) after installation?
Hi
Our data center folks want to remove any package that is not used at runtime. We told them that all the pre-req packages are needed during installation. Are they needed during the start/stop or run of OracleAS10g?
Thank you
Hi,
The compiler is also used for relinking during patching.
Regards,
Mathias
Similar Messages
-
Do I need to import any package for running exit(0)
i m using exit(0) but error is given on compilation.......do i need to import any package for exit() fucntion
Do you mean System.exit?
-
I need help w/ This: missing gina dll after installation...
I need help w/ This: missing gina dll after installation of linksys adaptor on Win XP.
Thank youI assume you are facing this error on wireless USB adapter ... WUSB54GC .... uninstall the adapter from all programs >> unplug & replug the adapter >> Install the drivers using found new hardware >>
Once installed use windows wireless configuration to connect to the wireless network .....
See if it works ..... -
Need to compile nvidia driver for a custom kernel [SOLVED]
I compiled a custom kernel following this wiki page: http://wiki.archlinux.org/index.php/Ker … rom_Source
I can boot into it just fine. I now want to compile an nvidia driver for use with it and followed the steps on this wiki page: http://wiki.archlinux.org/index.php/NVI … tom_kernel
I run into a problem when makepkg trys to compile it. Here is the output:
$ cd ~/devel/abs/nvidia/
$ makepkg -c
==> Making package: nvidia-my 190.42-1 x86_64 (Thu Nov 5 17:42:29 EST 2009)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
-> Found NVIDIA-Linux-x86_64-190.42-pkg0.run in build dir
==> Validating source files with md5sums...
NVIDIA-Linux-x86_64-190.42-pkg0.run ... Passed
==> Extracting Sources...
==> Entering fakeroot environment...
==> Starting build()...
Creating directory NVIDIA-Linux-x86_64-190.42-pkg0
Verifying archive integrity... OK
Uncompressing NVIDIA Accelerated Graphics Driver for Linux-x86_64 190.42..................................................................................................................................................
If you are using a Linux 2.4 kernel, please make sure
you either have configured kernel sources matching your
kernel or the correct set of kernel headers installed
on your system.
If you are using a Linux 2.6 kernel, please make sure
you have configured kernel sources matching your kernel
installed on your system. If you specified a separate
output directory using either the "KBUILD_OUTPUT" or
the "O" KBUILD parameter, make sure to specify this
directory with the SYSOUT environment variable or with
the equivalent nvidia-installer command line option.
Depending on where and how the kernel sources (or the
kernel headers) were installed, you may need to specify
their location with the SYSSRC environment variable or
the equivalent nvidia-installer command line option.
*** Unable to determine the target kernel version. ***
make: *** [select_makefile] Error 1
==> ERROR: Build Failed.
Aborting...
The step it's choking on is (from the PKGBUILD), "make SYSSRC=/lib/modules/${_kernver}/build module || return 1"
What am I doing wrong?
My PKGBUILD:
pkgname=nvidia-my
pkgver=190.42
_kernver='2.6.32-rc6-MINE'
pkgrel=1
pkgdesc="NVIDIA drivers for kernel26."
arch=('i686' 'x86_64')
[ "$CARCH" = "i686" ] && ARCH=x86
[ "$CARCH" = "x86_64" ] && ARCH=x86_64
url="http://www.nvidia.com/"
depends=('kernel26>=2.6.31' 'kernel26<2.6.32' "nvidia-utils=${pkgver}")
conflicts=('nvidia-96xx' 'nvidia-173xx')
license=('custom')
install=nvidia.install
source=("http://download.nvidia.com/XFree86/Linux-$ARCH/${pkgver}/NVIDIA-Linux-$ARCH-${pkgver}-pkg0.run")
md5sums=('f94806feee87de756d14fe3e9bcaf05a')
[ "$CARCH" = "x86_64" ] && md5sums=('ae431ff849ec01446e6724f9fcfe3bb4')
build() {
cd $srcdir
sh NVIDIA-Linux-$ARCH-${pkgver}-pkg0.run --extract-only
cd NVIDIA-Linux-$ARCH-${pkgver}-pkg0
cd usr/src/nv/
ln -s Makefile.kbuild Makefile
make SYSSRC=/lib/modules/${_kernver}/build module || return 1
mkdir -p $pkgdir/lib/modules/${_kernver}/kernel/drivers/video/
install -m644 nvidia.ko $pkgdir/lib/modules/${_kernver}/kernel/drivers/video/
sed -i -e "s/KERNEL_VERSION='.*'/KERNEL_VERSION='${_kernver}'/" $startdir/nvidia.install
My nvidia.install
post_install() {
KERNEL_VERSION='2.6.32-rc6-MINE'
depmod $KERNEL_VERSION
post_upgrade() {
post_install
rmmod nvidia || echo 'In order to use the new nvidia module, exit Xserver and unload it manually.'
post_remove() {
KERNEL_VERSION='2.6.32-rc6-MINE'
depmod $KERNEL_VERSION
Last edited by graysky (2009-11-07 10:54:33)Hello,
I'm kind of a noob and am trying to get follow the directions from the Nvidia wiki on installing on a custom kernel. I'm trying to use the abs method to install on kernel26rt version 2.6.33rt. I followed directions exactly and am getting an error that I didn't find on any other posts. Can you please take a look? Here is my terminal:
[jsadural@jlinux nvidia]$ makepkg -ci
==> Making package: nvidia-2633rt 270.30-3 (Wed Mar 30 08:53:08 PDT 2011)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving Sources...
-> Downloading NVIDIA-Linux-x86_64-270.30-no-compat32.run...
--2011-03-30 08:53:08-- ftp://download.nvidia.com/XFree86/Linux … mpat32.run
=> “NVIDIA-Linux-x86_64-270.30-no-compat32.run.part”
Resolving download.nvidia.com... 69.31.121.43
Connecting to download.nvidia.com|69.31.121.43|:21... connected.
Logging in as anonymous ... Logged in!
==> SYST ... done. ==> PWD ... done.
==> TYPE I ... done. ==> CWD (1) /XFree86/Linux-x86_64/270.30 ... done.
==> SIZE NVIDIA-Linux-x86_64-270.30-no-compat32.run ... 30037601
==> PASV ... done. ==> RETR NVIDIA-Linux-x86_64-270.30-no-compat32.run ... done.
Length: 30037601 (29M) (unauthoritative)
100%[======================================>] 30,037,601 696K/s in 42s
2011-03-30 08:53:50 (696 KB/s) - “NVIDIA-Linux-x86_64-270.30-no-compat32.run.part” saved [30037601]
==> Validating source files with md5sums...
NVIDIA-Linux-x86_64-270.30-no-compat32.run ... Passed
==> Extracting Sources...
==> Starting build()...
Creating directory NVIDIA-Linux-x86_64-270.30-no-compat32
Verifying archive integrity... OK
Uncompressing NVIDIA Accelerated Graphics Driver for Linux-x86_64 270.30........................................................................................................................
NVIDIA: calling KBUILD...
test -e include/generated/autoconf.h -a -e include/config/auto.conf || ( \
echo; \
echo " ERROR: Kernel configuration is invalid."; \
echo " include/generated/autoconf.h or include/config/auto.conf are missing.";\
echo " Run 'make oldconfig && make prepare' on kernel src to fix it."; \
echo; \
/bin/false)
mkdir -p /home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/.tmp_versions ; rm -f /home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/.tmp_versions/*
make -f scripts/Makefile.build obj=/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel
cc -Wp,-MD,/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/.nv.o.d -nostdinc -isystem /usr/lib/gcc/x86_64-unknown-linux-gnu/4.5.2/include -I/usr/src/linux-2.6.33-rt/arch/x86/include -Iinclude -include include/generated/autoconf.h -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -Wno-format-security -fno-delete-null-pointer-checks -O2 -m64 -mtune=generic -mno-red-zone -mcmodel=kernel -funit-at-a-time -maccumulate-outgoing-args -fstack-protector -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FRAME=1 -pipe -Wno-sign-compare -fno-asynchronous-unwind-tables -mno-sse -mno-mmx -mno-sse2 -mno-3dnow -Wframe-larger-than=2048 -fomit-frame-pointer -Wdeclaration-after-statement -Wno-pointer-sign -fno-strict-overflow -fno-dwarf2-cfi-asm -fconserve-stack -I/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel -Wall -MD -Wsign-compare -Wno-cast-qual -Wno-error -D__KERNEL__ -DMODULE -DNVRM -DNV_VERSION_STRING=\"270.30\" -Wno-unused-function -mcmodel=kernel -mno-red-zone -UDEBUG -U_DEBUG -DNDEBUG -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(nv)" -D"KBUILD_MODNAME=KBUILD_STR(nvidia)" -c -o /home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.o /home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c
In file included from /usr/src/linux-2.6.33-rt/arch/x86/include/asm/uaccess.h:573:0,
from include/linux/poll.h:13,
from /home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv-linux.h:84,
from /home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:13:
/usr/src/linux-2.6.33-rt/arch/x86/include/asm/uaccess_64.h: In function ‘copy_from_user’:
/usr/src/linux-2.6.33-rt/arch/x86/include/asm/uaccess_64.h:35:6: warning: comparison between signed and unsigned integer expressions
In file included from /home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:13:0:
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv-linux.h: At top level:
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv-linux.h:251:35: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘nv_spinlock_t’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv-linux.h:1436:5: error: expected specifier-qualifier-list before ‘nv_spinlock_t’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c: In function ‘nv_alloc_file_private’:
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:1993:5: error: implicit declaration of function ‘semaphore_init’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:1994:5: error: ‘nv_file_private_t’ has no member named ‘waitqueue’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:1995:5: error: implicit declaration of function ‘atomic_spin_lock_init’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:1995:5: error: ‘nv_file_private_t’ has no member named ‘fp_lock’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c: In function ‘nv_kern_poll’:
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:2790:30: error: ‘nv_file_private_t’ has no member named ‘waitqueue’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:2793:5: error: implicit declaration of function ‘atomic_spin_lock_irqsave’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:2793:5: error: ‘nv_file_private_t’ has no member named ‘fp_lock’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:2804:5: error: implicit declaration of function ‘atomic_spin_unlock_irqrestore’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:2804:5: error: ‘nv_file_private_t’ has no member named ‘fp_lock’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c: In function ‘nv_kern_close_registry’:
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:3595:18: error: ‘nv_file_private_t’ has no member named ‘off’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:3611:22: error: ‘nv_file_private_t’ has no member named ‘off’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c: In function ‘nv_kern_write_registry’:
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:3703:51: error: ‘nv_file_private_t’ has no member named ‘off’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:3710:45: error: ‘nv_file_private_t’ has no member named ‘off’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:3720:9: error: ‘nv_file_private_t’ has no member named ‘off’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c: In function ‘nv_post_event’:
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:4330:5: error: ‘nv_file_private_t’ has no member named ‘fp_lock’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:4347:5: error: ‘nv_file_private_t’ has no member named ‘waitqueue’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:4348:5: error: ‘nv_file_private_t’ has no member named ‘fp_lock’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c: In function ‘nv_get_event’:
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:4362:5: error: ‘nv_file_private_t’ has no member named ‘fp_lock’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:4365:9: error: ‘nv_file_private_t’ has no member named ‘fp_lock’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:4390:5: error: ‘nv_file_private_t’ has no member named ‘fp_lock’
make[3]: *** [/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.o] Error 1
make[2]: *** [_module_/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel] Error 2
NVIDIA: left KBUILD.
nvidia.ko failed to build!
make[1]: *** [module] Error 1
make: *** [module] Error 2
==> ERROR: A failure occurred in build().
Aborting...
thanks,
jason -
Help needed: making a psptoolchain package for arch
Hi....
I'm very new to archlinux (now using it for 3 weeks), but I really like it
Now I tried to make a archlinux package for the psptoolchain (PSP's are so nice )
I already got a working package for the psp-gcc and the psp-binutils (wrote my own PKGBUILD's) which came with the psptoolchain.
But now I got stuck with psp-newlib and pspsdk.
At the moment I'm building all the packages separately, but later I'll try to make one package for the whole psptoolchain....
So here comes my problem with psp-newlib and pspsdk...
psp-gcc -march=i686 -O2 -pipe -G0 -Wall -I../../src/base -I../../src/kernel -c sceAtrac3plus.S
sceAtrac3plus.S:0: error: bad value (i686) for -march
Assembler messages:
Error: Bad value (i686) for -march
make[3]: *** [sceAtrac3plus.o] Error 1
make[3]: Leaving directory `/mnt/data/archlinux/packages/psptoolchain/pspsdk/src/pspsdk/src/atrac3'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/mnt/data/archlinux/packages/psptoolchain/pspsdk/src/pspsdk/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/mnt/data/archlinux/packages/psptoolchain/pspsdk/src/pspsdk'
make: *** [all] Error 2
==> ERROR: Build Failed. Aborting...
And here comes my PKGBUILD for psp-newlib:
# Contributor: [email protected]
pkgname=newlib
pkgver=1.13.0
pkgrel=1
pkgdesc="GCC for psp-devel"
url="http://ps2dev.org/psp/Tools/Toolchain/"
depends=()
makedepends=()
source=(ftp://sources.redhat.com/pub/newlib/$pkgname-$pkgver.tar.gz)
md5sums=('3d07cc367a22b78c44227456b0d3b7dc')
build() {
export PSPDEV="/usr/local/pspdev"
export PATH="$PATH:$PSPDEV/bin"
cp $startdir/newlib-1.13.0.patch /$startdir/src/$pkgname-$pkgver
cd $startdir/src/$pkgname-$pkgver
cat newlib-1.13.0.patch | patch -p1
cd /$startdir/src/$pkgname-$pkgver
BUILDDIR="/tmp/pspdev" PSPDEV="/usr/local/pspdev" ./configure --prefix=/usr/local/pspdev --target=psp
make || return 1
make DESTDIR=$startdir/pkg install
I know, using newlib as pkgname is bad, but later I'll change it to psp-newlib and I'll replace the $pkgname's with newlib (I hope this idea isn't too bad)
One last thing: psp-binutils and psp-gcc are installed in "/usr/local/pspdev"
I hope you can help me
thanks, and have a nice day
XazZAfter a long break I decided to work on the PKGBUILD again.
Now I got two PKGBUILD's: one for the psptoolchain and one for pspsdk (pspsdk gets updated very often, so I decided to create an extra PKGBUILD).
I'm not sure if my PKGBUILD's fit the PKGBUILD-standard
First thing before I post my PKGBUILD's: I'm not finished with adding all required fields (as license and so on)!
Here comes the one for psptoolchain:
pkgname=psptoolchain
pkgver=2211
pkgrel=1
pkgdesc="A collection of tools to create executables for the Sony PSP"
url="http://ps2dev.org/psp/Tools/Toolchain/"
depends=('subversion' 'texinfo')
makedepends=()
license=('GPL')
source=(ftp://ftp.gnu.org/pub/gnu/binutils/binutils-2.16.1.tar.bz2 ftp://ftp.gnu.org/pub/gnu/gcc/gcc-4.0.2/gcc-4.0.2.tar.bz2 ftp://sources.redhat.com/pub/newlib/newlib-1.15.0.tar.gz)
md5sums=('6a9d529efb285071dad10e1f3d2b2967'
'a659b8388cac9db2b13e056e574ceeb0'
'4020004b1b7a56ca4cf7f6d35b40a4cb')
sha1sums=('5c80fd5657da47efc16a63fdd93ef7395319fbbf'
'f1b714c6398393d8f7f4ad5be933b462a95b075d'
'f6860b36e48fb831a30bab491230bbc7ce2669a2')
arch=('i686')
_svntrunk=svn://svn.pspdev.org/psp/trunk/psptoolchain
_svnmod=psptoolchain
_svntrunk1=svn://svn.pspdev.org/psp/trunk/pspsdk
_svnmod1=pspsdk
build() {
cd $startdir/src
svn co $_svntrunk $_svnmod
cd psptoolchain
cp binutils-2.16.1.patch $startdir/src/binutils-2.16.1/
cp gcc-4.0.2.patch $startdir/src/gcc-4.0.2/
cp newlib-1.15.0.patch $startdir/src/newlib-1.15.0
export PSPDEV="$startdir/pkg/usr/local/pspdev"
export PATH="$PATH:$PSPDEV/bin"
msg "patching and building binutils..."
cd $startdir/src/binutils-2.16.1
cat binutils-2.16.1.patch | patch -p1
./configure --prefix=/usr/local/pspdev --target=psp --enable-install-libbfd
make clean || return 1
make || return 1
make DESTDIR=$startdir/pkg install
msg "building and patching binutils finished"
msg ""
msg "patching and building gcc..."
cd $startdir/src/gcc-4.0.2
cat gcc-4.0.2.patch | patch -p1
mkdir objdir
cd $startdir/src/gcc-4.0.2/objdir
../configure --prefix=$startdir/pkg/usr/local/pspdev --target=psp --enable-languages="c" --with-newlib --without-headers
make || return 1
make DESTDIR=/ install
msg "building and patching gcc finished"
msg ""
msg "building pspsdk-headers - we'll only need them temporary"
cd $startdir/src/
svn co $_svntrunk1 $_svnmod1
cd $_svnmod1/
./bootstrap
./configure --prefix=/usr/local/pspdev -with-pspdev=/usr/local/pspdev
make clean || return 1
make DESTDIR=$startdir/pkg install-data
msg "building pspsdk-headers finished"
msg ""
msg "patching and building newlib-psp"
cd $startdir/src/newlib-1.15.0
cat newlib-1.15.0.patch | patch -p1
./configure --prefix=$startdir/pkg/usr/local/pspdev --target=psp
make || return 1
make DESTDIR=/ install
msg "building newlib-psp finished"
msg ""
msg "building gcc-c++"
cd $startdir/src/gcc-4.0.2
mkdir build-psp-c++
cd $startdir/src/gcc-4.0.2/build-psp-c++
../configure --prefix=$startdir/pkg/usr/local/pspdev --target=psp --enable-languages="c,c++" --with-newlib --enable-cxx-flags="-G0"
make clean || return 1
make CFLAGS_FOR_TARGET="-G0"
make || return 1
make DESTDIR=/ install
msg "building gcc-c++ finished"
msg ""
msg "removing unnecessary code"
cd $startdir/pkg/usr/local/pspdev/psp
rm -rf sdk
msg "Now you need to build and install pspsdk!"
And here the one for pspsdk:
pkgname=pspsdk
pkgver=2209
pkgrel=1
pkgdesc="A collection of Open Source tools and libraries written for the Sony Playstation Portable (PSP)."
url="http://ps2dev.org/psp/Tools/Toolchain/"
depends=('psptoolchain')
makedepends=()
arch=('i686')
license="custom"
_svntrunk=svn://svn.pspdev.org/psp/trunk/pspsdk
_svnmod=pspsdk
build() {
export PSPDEV="/usr/local/pspdev"
export PATH="$PATH:$PSPDEV/bin"
cd $startdir/src
svn co $_svntrunk $_svnmod
cd $_svnmod/
./bootstrap
./configure --prefix=/usr/local/pspdev -with-pspdev=/usr/local/pspdev
make clean || return 1
make DESTDIR=$startdir/pkg install-data
make clean || return 1
./configure --prefix=$startdir/pkg/usr/local/pspdev -with-pspdev=/usr/local/pspdev
make || return 1
make DESTDIR=$startdir/pkg install
Some explanation: I've used this one very often: --prefix=$startdir/pkg/usr/local/pspdev
Explanation: When I wanted to create only one PKGBUILD for the psptoolchain, some dependences were in $startdir/pkg. If you take --prefix=/usr/local/pspdev he won't get some depencies (mostly header files), which means I had to create single PKGBUILD's for every part of the psptoolchain (that would be 6 single parts).
Those --prefix-changes don't stop my psp environment from working! (tested it myself - I comiled almos all sample apps which were included in the pspsdk - and all compiled well)
I hope we can find a better solution than mine.
Thanks in advance
XazZ -
Need to compile C code for Solaris 5.4 target
Hi,
I'm current on a project where the target platform is Solaris 5.4. I believe the SunOS version is 2.4. Unfortunately, there is no way I can get the customer to upgrade their server or OS.
In my search so far I've been unsuccessful in finding a compiler for that platform. The oldest gcc I can find is for SunOS 2.5.
What other options do I have?
Will code compiled with the C compiler in the Sun Studio 12 be able to run on SunOS 2.4? If so, is there a command line option I need to set while compiling the code?No available Sun compiler can be used on, or to generate code for, SunOS 5.4 (Solaris 2.4). Even Sun Workshop 5.0, released in 1998, did not support Solaris 2.4.
If you develop code to be run on Solaris 2.4, you need to compile on Solaris 2.4 (or earlier). Binaries created on a later version of Solaris will not in general run on an earlier version of Solaris. I think that Sun WorkShop 3.0 was the last version that supported Solaris 2.4, but it might have been WorkShop 2.0. Those antiques are not available from Sun.
If I were in this situation, I would tell the customer that the OS and all support software are many years past End Of Service Life. No support is available, the software is no longer available, and I can't help them unless they are willing to upgrade to supported software. (I might also ask the customer if they still use Windows 3.1 on their PCs. The situation is comparable.)
If you don't have that option, your next best hope is that the customer has a C compiler on their system. If so, find a way to use it. If it's a Sun compiler, you will have a problem acquiring a license to run it. You will probably have to run it on their system.
If the customer doesn't have a compiler, I guess you have to keep trolling in newsgroups and forums, looking for a compiler that supports Solaris 2.4. Good luck. -
Where can I find adobe file packager for linux?
Now I need Adobe's file packager to produce .f4f ,.f4m and .f4x files in linux for http dynamic streaming. but I can't find where to download it.
Isn't the packager part of Flash Media Server?
http://help.adobe.com/en_US/HTTPStreaming/1.0/Using/WS9463dbe8dbe45c4c-c126f3b1260533756d- 7ffc.html#WSaeac10ab694095a12a9a3a7d12823cda643-7fff
HTTP live media streaming software | Adobe Media Server 5 Professional
Adobe Media Server Help | Install Adobe Media Server -
I have purchased the OS X mountain lion and want to re install after resetting my system but app store not showing it in my purchases. Do i need to re buy it and pay for it again for the second installation. ?
Welcome to the Apple Support Communities
Open App Store > Featured > Account > Show hidden purchases and unhide Mountain Lion. You can install Mountain Lion on all your computers for free -
Latest flashplayer package for Linux tar.gz appears to be defective.
Yeah, I know those are strong words, so here's the story:
In the past, the flashplayer package for tar.gz, the only version of flashplayer i know that installs in all Linux distros, has always unzipped into a directory containing two files, one of which is a script. You CD to the directory, run the script, and flashplayer installs.
Well, suddenly , there is no directory, and no script, just a single library file named flashplayer.so
The installation instructions have not changed, however:
"Installation instructions for tar.gz
Click the download link to begin installation. A dialog box will appear asking you where to save the file.
Save the .tar.gz file to your desktop and wait for the file to download completely.
Unpackage the file. A directory called install_flash_player_10_linux will be created.
In terminal, navigate to this directory and type ./flashplayer-installer to run the installer. Click Enter. The installer will instruct you to shut down your browser(s).
Once the installation is complete, the plug-in will be installed in your Mozilla browser. To verify, launch Mozilla and choose Help > About Plug-ins from the browser menu."
The directory is mentioned, and so is the script, but those things aren't in the file anymore. So yeah, something's seriously messed up, and has been for weeks. I'm wondering if someone can maybe tell me if there's a place on the web where I can find the previous version.11.2.202.346 was and is the last version to be developed for Linux. There won't be any more.
-
Need to use default package for JNI code?
Hi,
I don't have much experience with JNI code, so excuse me if I make a silly mistake.
I have a set of DLLs to interface with Microsoft native speech code ("Microsoft Sam") -- a GPL library called Quadmore. Quadmore has some sample Java code to work with the libraries, all of which they put in the default package (no package). If I move their code to a named package, it breaks. The Java code is able to load th libraries, but can't find any of the methods.
Looking at the source for their DLLs (though I don't speak C++), the method names are things like
JNIEXPORT jboolean JNICALL Java_QuadmoreTTS_SpeakDarling(JNIEnv *env,jobject obj,jstring strInput)As far as I understand, this implies that the QuadmoreTTS.class that calls the code must be in the default package, as otherwise the method name needs to be prepended with a package name.
If that's so, then there's no way I can use the code as-is, right? Naturally, the rest of my program is in named packages, and I can't import any class that is in the default package, right? I've tried placing all their code in a jar and adding the jar to my classpath, but I still can't import any of their classes as they are in the default package.
Is the only solution to re-compile all their C/C++ code to let it use packages? Am I being dumb and missing something? I'm pretty sure other people have used Quadmore before, so I can't believe that they've never had this problem before.
Any suggestions greatly appreciated!
SamC/C++ functions in JNI must conform to the prototypes produced by running the javah compiler against the class file with native methods in it. So if you move the class to another package, the prototypes change. If you doun't change the compiled C coudes to suit, you will get undefined method errors when you load the dll as the JVM won't be able to match the native methods to the methods in the dll (it will call WinLoadLibrary() and WinLoadProcAddress() or somesuch under Windows).
-
We need a teacher tablet package for schools
Wy doesn't Apple get hip to the needs of educators and capture a piece of the pie to get technology into teachers hands? Apple should create a package that could be advertised to district superintendants and administrators; the package should include one main computer for the school with an Apple account for the school, X number of ipads depending on school needs with an app bundle that includes iworks, Microsoft office, and for gods sake the ability to run flash and java. This could either be a third party app or Apple could realize there is a need, Hawaii uses eSIS for grading and attendance which requires java. We may be purchasing Asus Eeee tablet computers instead of ipads simply because of this. If a school purchases ipads now, teachers have to buy their own apps yet they do not own the ipad. Creating a bundle of most used apps allows schools a one time purchase that allows schools and teachers to get up and running immediatly with the basics needed in our profession. Then leadership teams could decide what other apps they want to purchase as they go.
Is anybody listening?Microsoft would have to make office for iPad-not Apple.
Flash and java are not going to happen, no matter what misguided reasons you want it.
Some links you may find educational:
http://www.apple.com/hotnews/thoughts-on-flash/
http://ipadeducators.ning.com/m/
http://www.iear.org/
http://www.nytimes.com/2011/01/05/education/05tablets.html?pagewanted=all
http://www.usatoday.com/money/industries/technology/2011-08-02-inkling-ipad-e-te xtbooks_n.htm -
Prereq packages for grid 11.2.0.3 on rhel6
I am trying to install grid infrastructure 11.2.0.3 on rhel6 x86_64 and I ran the runcluvfy.sh script with the following options and it is reporting that there are a handful of missing packages but when I try to use yum to download and install the packages it says that they are not available?
./runcluvfy.sh stage -pre crsinst -n node01,node02 -fixup -verbose
Here is my yum output...
yum install libaio-0.3.105.i386 - No package
libaio-0.3.105.i386 available
yum install compat-libstdc++-33-3.2.3.i386 - No package
compat-libstdc++-33-3.2.3.i386 available.
yum install elfutils-libelf-devel-0.97 - No package
elfutils-libelf-devel-0.97 available.
yum install libaio-devel-0.3.105.i386 - No package
libaio-devel-0.3.105.i386 available
yum install libgcc-3.4.6.i386 - No package
libgcc-3.4.6.i386 available
yum install libstdc++-3.4.6.i386 - No package
libstdc++-3.4.6.i386 available.
yum install unixODBC-2.2.11.i386 - No package
unixODBC-2.2.11.i386 available.
yum install unixODBC-2.2.11.x86_64 - No package
unixODBC-2.2.11.x86_64 available
yum install unixODBC-devel-2.2.11.i386 - No package
unixODBC-devel-2.2.11.i386 available.
yum install unixODBC-devel-2.2.11.x86_64 - No package
unixODBC-devel-2.2.11.x86_64 available
yum install pdksh-5.2.14 - No package pdksh-5.2.14
available
Whats the deal? Do I really need these packages?
Any help is greatly appreciated.
Thanks.I tried and got the following. I believe that only works if you have oracle unbreakable linux? I have redhat enterprise linux 6.
[root@qlndlnxraccl01 tmp]# yum install oracle-validated
Loaded plugins: refresh-packagekit, rhnplugin
Setting up Install Process
No package oracle-validated available.
Error: Nothing to do -
There are plenty of executables, but non of them opened a window when I clicked on them. The package is the latest beta release.
You need to start the firefox script.
*http://kb.mozillazine.org/Installing_Firefox#Linux
Create a new profile exclusively for the 4.0 beta version and create a desktop shortcut with -P "profile" appended to the target to launch that profile.
* http://kb.mozillazine.org/Testing_pre-release_versions
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox -
Whre can I get these packages for linux?
Hi,
I installed OWB in Linux Server.
Database oracle10g, Workflow server 2.6.3 are installed on Linux server.
Now I want to install OEM in Linux server. While I am trying to install OEM, it is showing that, the prerequisites are not satisfied.
Oracle Grid Control 10g Release 1 (10.1) installs.
Specifically, please ensure the following:
* Availability of gcc-3.2.3, setarch-1.3, pdksh-5.2,
openmotif21-2.1.30, sysstat-4.0.7, gnome-libs-1.4.1.2.90-34.1,
libstdc++-3.2.3, etc.
* Availability of Compat libraries:
compat-libstdc++-devel-7.3-2.96.122,
compat-glibc-7.x-2.2.4.32.5, etc.
* Patch for libcwait.so (Patch no. 3006854)
* Symbolic links for gcc/g++
Finally I checked the packages in my linux server. I found as follows
gcc-3.2.3-20
setarch-1.3-1
package pdksh-5.2 is not installed
package openmotif21-2.1.30 is not installed
package sysstat-4.0.7 is not installed
gnome-libs-1.4.1.2.90-34.1
libstdc++-3.2.3-20
compat-libstdc++-devel-7.3-2.96.122
package compat-glibc-7.x-2.2.4.32.5 is not installed
How to get the components (Not Installed components).
Is there any site that provides this software?
Any help is appreciated.
Thanks and regards
Gowtham Sen.Which version of Linux are you using?
Read this:
http://lists.suse.com/archive/suse-oracle/2004-Jul/0033.html
Maybe it can be useful help.
Also, try to re-open this thread in the OEM Forum (Enterprise Manager
Good luck.
Marcos -
Prompted for Credentials after installation.
After a fresh installation of a client OS the Lync client starts and asks for the users credentials. This used to auto-populate with the sip address, user account and credentials and begin the login process... Outlook still does. The
user can enter the appropriate information and they are authenticated into Lync. We'd rather they didn't have to enter this first time (like it used to be).
How is this no longer working? Is there some client policy that I check or user/lync attribute that is now messed up? How does Lync populate these fields.
Any help will be greatly appreciated.
Thanks,
JamesDid the new fresh installation client OS join the domain?
If the computer didn’t join the domain and the Windows account you used to log on wasn’t Lync enabled, you need to enter the credential manually.
Lisa Zheng
TechNet Community Support
Maybe you are looking for
-
How to open and modify a internet service.
I want to modify Internet Service PZ02. I checked in SICf, it is listed under bc/gui/sap/its and is also activated. But when i go to SE80 and search for it in Internet Service, i get a message saying "Service PZ18 does not exist, create object? " How
-
I'm in the Hotel Concorde in Berlin and can't get iChat up. Reviewing the topics it would appear the hotels security won't allow the traffic through. Can I get some advise on what I should be asking the Hotel to change to give me access? Thanks.
-
Hi, 1. What is the procedure to copy originals from local content server to central content servers located at different geographical locations. (There is a report SAPKROTP, but i am unable to execute it). Even if copy it, will it display in DIR
-
Hi In sales Order row lines i have fiven 2 decimal places . for eg it is not rounding off figure like 280.34 it is o.k , but in Total (LC) is is rounding off for eg 3245.47 to 3245.5 which i don't want Thanks
-
What is Wrong with CS4 Software?
I Upgrated Mac Operating system Panter OS X 10.9.1 and I'm not able to print from photoshop or Ilustrator, Programs Crashes, when loading cc profiles, paer and size, new driver instaled