How to open and modify a internet service.

I want to modify Internet Service PZ02. I checked in SICf, it is listed under bc/gui/sap/its and is also activated.
But when i go to SE80 and search for it in Internet Service, i get a message saying "Service PZ18 does not exist, create object? "
How do i open, get access to code of pz18 and modify it
Thanks
Sharath

Chris-
Thanks for the reply.
How do i create the ITS service (service file, template, theme etc..) out of the dynamically generated HR service PZ02.
Pleae let me know if the following steps are correct
1. In SE80, Choose Internet service and enter a name like zpz02.
2. In the pop-up for transaction code enter pz02. Check the box for ITS mixed mode
3. Then Right click in zpz02, select create->template->
assign theme=99,
program number-SAPMPZ02
screen number=1000
generating style=webgui
( The above informtaion was found out in the following way: go to se93 -> enter pz02 as the transaction code ->
click display.
When i did that it displayed the following info
program : SAPMPZ02
selection screen: 1000 )
When i click on save it says that the screen 1000 does not exist in the program SAPMPZ02.
But from the info that i got from the SE93 it looks like the screen number is 1000??
What is the mistake ?? Is the approach wrong
Help will be really appreciated
Sharath

Similar Messages

How do i open and modify my pdf converted to excell spreadsheet

How do I open and modify my PDF converted to Excell spreadsheet?

After the conversion from PDF to .xlsx, you should be able to open the file in Excel and edit it like any other Excel file.

How to stop and start IGS(internet graphic server)

Hi Techies
How to stop and start IGS(internet graphic server) in Solaries
IGS is 7.0 1patch
Is this the command to stop and start IGS
stopigs and startigs
If this correct will there be any issues if i stop the IGS from the above command
Thank You
Haroon

Hoi Haroon
On base 6.40 there were stopigs/startigs scripts, yes. When we upgraded our systems to 7.0 I encountered the same problem, the igs could be stopped, but not started anymore (externally). Can you check, if the startigs/stopigs-scripts are 7.0 or 6.40.
I then opened an oss and got as answer:
"To start and to stop the igs there's only the offical way by stopping and starting the sap system".
However I found a solution to start and stop:
start:
nohup /sapmnt/<SID>/exe/igswd_mt -mode=profile pf=/usr/sap/<SID>/SYS/profile/<Instaneprofile> &
e.g.:
nohup /sapmnt/P72/exe/igswd_mt -mode=profile pf=/usr/sap/P72/SYS/profile/P72_DVEBMGS01_migzmc10 &
stop:
--> stopigs, therefore the 6.40-stopigs script has to remain in the exe directory.
Hope this helps.
Regards Patrick

HT4753 would number automatically save an .xlsx file I opened and modified but not saved? I've lost a file with many edits...

would number automatically save an .xlsx file I opened and modified but not saved? I've lost a file with many edits...

kearly - thanks a million for posting both the question & the reply! I just unchecked that little box by accident, & couldn't figure out for the life of me how to fix it. Thanks again!!

How to open and closed posting period??

Dear Gurus,
Pls help me, how to open and closed posting period.when and how we used special period.
Regrds
Mahesh

HI,
Tcode is ob52
here we generally provide the following details
a/c type from a/c to a/c from period year to period year from period year to period
+ 1 2007 12 2007 13 2007 16
+ implies it applicable to all account types
generally we can have maximum 4 special periods and total no of periods(normal+special) should not exceed 16
generally we use special periods for year end adjustments like tax adjustments
if it is useful assign me points

How to open and close posting period for both material , n invoicing

HI
how to open and close posting period for both material , n invoicing , AM NEW TO SD , SO ALL DOUBTS I DO POST IN HERE PLEASE DONT MIND

Hi Sunaina
Period Open T.code: MMP1
Period Close T-Code: MMPV
Automate the opening of MM periods
How can you automate the monthly opening of MM periods (transaction MMPV - program RMMMPERI) with
SM36?
RMMMPERI accepts a period/year or a date.
If you enter a date the period is derived by it.
1. create a variant and check the attribute 'selection variable' for the parameter date. Then click the button 'Selection variables' and set the current date. Every time this variant is used the parameter DATE is filled with the current date.
2. create a job for RMMMPERI with the variant created in the preceding step. Set it as periodic.
If you're not using a fiscal year variant simply schedule it as monthly (to be executed the first day of the month).
If you are using a fiscal year variant you'd have to define a calendar with only the first day of each period defined as working
day and use it in the periodicity restrictions.
Another possibility:
Write a very simple ABAP which run daily to check if the period has changed and submit RMMMPERI.
Reward if useful to u

How to open and navigate between human task forms in a same page?

Hi
I use Oracle BPM 11.1.1.5
I have a question about taskflows in BPM Application.
In ADF web application, I create a sipmle task flow and insert view id and bind these to jspx pages, my pages are opend in same page when
return an outcome.
For exapmle I have three pages like A,B,C.
In task flow, insert three view ids and bind to A,B,C.
My first pages is A, and when outcome is B navigate to B, when my outcome is C then navigate to C in a same page not separate pages.
But my problem is here.. in BPM Application when create task forms, every task has a separate task flow that there exist a single view id and a wild card flow in it.
In BPM workspace when initiate human task form is closed, I should press refresh button to see next human task form in task list table.
I tried to create a simple task flow and insert human task forms in it and navigate between these.. but show human task form in wrong display and don`t show some component and human task payload.
Now, my question : How to open and navigate between human task forms in a same page like software installation?

Having a separate Data Control for each human task is normally the case. There is a way to assign multiple human tasks to a single data control (and one task flow), but I don't think that this is going to help you with what I think you're trying to do.
If your human task is called "EmployeeDetail", then you'd use the data control associated with this for the UI pages in the task flow diagram that is associated with this human task. For example, you might have a first page that has just the basic employee information - the fields (at least the ID field) would come from the EmployeeDetail data control. When the end user clicks "Next", you might have this UI page flow to a second UI page in the task flow diagram that has the employee's address information. You might place the address fields from the EmployeeDetail data control onto this second UI page.
You might be asking how the work item instance can automatically flow to the next interactive activity in the process while staying inside the first interactive activity's human task's task flow diagram. This is not how it works - the task flow diagram models the end user interaction while inside a single human task that is tied to a specific interactive activity in the process. If you want a the end user to be able to move the instance through multiple interactive activities in the process in one interaction, look at "Activity Guides". Activity Guides do a nice job of this.
Dan

How to open and edit a TopLink .mwp file?

I can not open the toplink_mappings.mwp file using JDeveloper tool.
How to open and edit a TopLink .mwp file?
Thank you

Hi,
Use JDeveloper to import the mwp project .In Jdeveloper,File->Import->ToplinkWorkbench->Select the .mwp file and can work from JDeveloper in editing the tlmap.xml and session.xml.
Regards,
P.Vinay Kumar

How to start and stop the BI Services in Solaris 10

Hello All,
Can anyone guide me on how to start and stop the BI Services in Solaris 10. In windows there are options set in Start->Programs->Middleware_Home->Start/Stop BI Services.
Primarily after doing changes to the scheduler configuration, I need to restart the services to get it implemented? If yes how can I do it?
Any help will be appreciated
Thank you
Ash
Edited by: 902739 on Jan 11, 2012 12:17 PM

Please help me by showing action plan for stop sap , offline backup and then start sap.
i am little bit confuse How to start and stop SAP on cluster for offline backup
Below are the systems name with host name , please explain me in sequence
Systems name                                   Hostname
# Hope SAP ERP Prod DB Primary       gsgbbux860
# Hope SAP ERP Prod DB Standby      gsgbbux861
# Hope SAP ERP Prod Cluster              gsgbbux862
# Hope SAP ERP App 1                       gsgbbux864
# Hope SAP ERP App 2                       gsgbbux865
Thanks in advance
Zaheer

How to install and consume GroupWise Web Service (SOAP)

Hello! I'm Razvan, programmer from Romnia, and I am new to GroupWise development.
I am asking if anyone could help me with a C# Visual Studio 2010 example of how to install and consume GroupWise Web Service (SOAP).
The documentation from novell site didn't help me, i didn't understant much of it.
All I need is either a link to a documented GroupWise C# developer step-by-step tutorial, or some code examples.
Can you please show me some code examples in C# with:
1)loging in using a username and a password,
2)retrieving contact list,
3)retrieving appointment list,
4)sending a mail,
5)setting an appointment
I don't know how to use "groupwise.wsdl" and customise it so that it points to our GroupWise server.
Please, I really need this because I am working at a project right now which involves GroupWise integration.
I hope I haven't disturbed anyone with my simple question.
I know this might be a very simple question given the complexity of the other posts here, but that's why I really hope I will get an answer soon.
Thank you very much!
Signature:
How old is the Orthodox faith?
How old is the orthodox faith?

Just a comment.
The value for the version element should be "1.02"
not "1.2".
Preston
>>> On Tuesday, March 01, 2011 at 8:06 AM,
TheRomanian<[email protected]> wrote:
> I have great news! After strong documentation yesterday and today, I've
> just made a successfull example that actually connects to our GroupWise
> server.
>
> I made it in PHP.
>
> I need an ASP.NET + C# application, but now is very simple to convert
> it. I post the PHP code here for other people who in future might be
> interested in finding out.
>
> So a simple PHP GroupWise Login code using "groupwise.wsdl" web
> service:
>
>
> require_once('./GWService/GroupwiseService.php');
> require_once('FB.class.php');
>
> $classmap = array(
> 'Authenication' => 'Authenication',
> 'PlainText' => 'PlainText',
> 'loginRequest' => 'loginRequest',
> 'loginResponse' => 'loginResponse',
> 'logoutRequest' => 'logoutRequest',
> 'logoutResponse' => 'logoutResponse',
> 'UserInfo' => 'UserInfo',
> );
>
> $gwservice = new GroupwiseService(
> "./WSDL/groupwise.wsdl",
> array(
> "location" => "http://11.150.40.78:8756/soap",
> *Your GroupWise server IP:
> and PORT*
> "classmap" => $classmap,
> "trace" => true)
> );
>
> // do login
> $pt = new PlainText();
> $pt‑>username = *"YOUR GROUPWISE USERNAME"*;
> $pt‑>password = *"YOUR GROUPWISE PASSWORD"*;
>
> $lr = new loginRequest();
> $lr‑>auth = $pt;
> $lr‑>language = "en";
> $lr‑>version = "1.2";
> $lr‑>application = "phpClient";
>
> $lres = $gwservice‑>loginRequest($lr);
> //print_r($lres);
>
>
> I Hope this will help others.
>
> ‑‑
> Signature:
>
> How old is the Orthodox Faith?
> 'How old is the orthodox faith?'
> (http://www.orthodoxphotos.com/history.shtml)

How to find and modify item in a nested array collection?

Hi,
would anybody know how to find and modify item in a nested
array collection:
private var ac:ArrayCollection = new ArrayCollection([
{id:1,name:"A",children:[{id:4,name:"AA",children:[{id:8,name:"AAA"}]},{id:5,name:"AB"}]} ,
{id:2,name:"B",children:[{id:6,name:"BA"},{id:7,name:"BB"}]},
{id:3,name:"C"}
Let's say I've got object {id:8, name:"X"} , how could I find
item in a collection with the correspoding id property, get handle
on it and update the name property of that object?
I'm trying to use this as a dataprovider for a tree populated
via CF and remoting....
Thanks a lot for help!

Thanks a lot for your help!
In the meantime I've come up with a recursive version of the
code.
This works and replaces the item on any level deep:
private function findInAC(ac:ArrayCollection):void{
var iMatchValue:uint=8;
for(var i:uint=0; i<ac.length; i++){
if(ac
.id == iMatchValue){
ac.name = "NEW NAME";
break;
if(ac
.children !=undefined){
findInAC( new ArrayCollection(ac.children));
However, if I use the array collection as a dataprovider for
a tree and change it, the tree doesn't update, unless I collapse
and reopen it.
Any ideas how to fix it ?

Working with Chinese characters: How to paste and modify them as sentences; not as individual images?

Working with Chinese characters: How to paste and modify them as sentences; not as individual images?
From 2004, this is so far the most detailed answer I could find: http://en.allexperts.com/q/Adobe-Illustrator-1027/FONTS-display-problem-Adobe.htm, but is this really still the most up-to date solution?
Is it possible at all to work with Chinese characters, if I don't have the Chinese version of Illustrator? (http://www.proz.com/forum/dtp_desktop_publishing/221125-chinese_in_indesign.html)

Thanks for your reply.
I'm using Version 17.1.0 (64-bit) - basically CS6.
Operating system is Windows 8.1. Installed is the simplied Chinese language package.
I have received the text in a Word document. It contains mixed characters, something like this:
教授资料
学术背景：
博士；曾于波恩大学（Rheinische Friedrich-Wilhelms-Universität Bonn）、台湾师范大学、
I have tried to paste it in the two following ways:
1) to create a text box and paste the text. The result is that some of the characters are not showed correctly.
2) Paste it directly without any preparation. This result into a single "image" or group of images. I can cancel modify each character one at a time, or I can dissolve the group, but the result is the same.

How to deploy and debug java web service in eclipes or using any other soft

Hai,
can any one tell me how to deploy and debug java web service in eclipes or using any other software.
i have used tomcat web server and jdk1.4.0 to develop web service.
we have used web service to interact with MS outlook .
bye
sudhakar.m

Hi Sudhakar,
If you are used to working with ant then you can very well use eclipse to deploy your web service.
You would usually have the ant script in the source root working directory. From eclipse if you select the build file from the navigator view and right click you will see a run ant option in the pop up menu.
Select that option and you would be able to see each targets with a checkbox select option. So define each target maybe one for wsdl2java conversion, one for compilation and one for deploying your web services. You can either make all of them run by having depends option on or you can run them individually as it takes your fancy.
I am not sure about debugging a web service yet.
Hope this helps
Aviroop
The truth is out there? Does anyone know the URL?

How to install and configure "SAP MAPI Service Provider" in 470(basis 620)?

Hi everyone,
Requse:
Send E-mail from SAP and Recive E-mail from MS outlook2003.
My question:
How to install and configure "SAP MAPI Service Provider" in 470(basis 620)?
For example:
Which setting need to do in R/3 server?
Which parameters need to select when install 620gui?
Which setting need to mark in MS outlook2003?
Thanks and Regards,
Colin.

Hi Colin,
For SAP MAPI read,
http://help.sap.com/saphelp_46c/helpdata/en/04/81dd4ebf2811d2897f0000e8216438/frameset.htm
For Sending mail from SAP,
http://help.sap.com/saphelp_46c/helpdata/en/55/a8b538891b11d2a25a00a0c943858e/frameset.htm
For Receiving mails read,
http://help.sap.com/saphelp_nw04/helpdata/en/af/73563c1e734f0fe10000000a114084/frameset.htm
<b>Which parameters need to select when install 620gui?</b>
Don't get this question...
<b>Which setting need to mark in MS outlook2003?</b>
None
Regards
Juan
Please reward with points if helpful

How to uncover and use the hidden Service menu on the Galaxy S3

I ran across this article over at Android Central that appeared interesting, there appears to be a diagnostic menu built into the S3 software to test the hardware for defects, this may be a useful item for any users that feel that they have a defective device... Check out the article at How to uncover and use the hidden Service menu on the Galaxy S3

That's good to know that such options exist in phones.

How to open and modify a internet service.

Similar Messages

Maybe you are looking for