Do we see an Error Message at the Spreadsheet Level?

My Interface is a Table - PA_TRANSACTION_INTERFACE_ALL
I am using Oracle Standard Importer to pick data from PA_TRANSACTION_INTERFACE_ALL and load to PA base tables. I have defined Error setups as below. My expectation is, if there is any validation failure during the Importer process, the Error Message will be Displayed to the User at the Spreadsheet level itself (Experts, request to correct my understanding here)
Error Row Definition -
SELECT * FROM PA_TRANSACTION_INTERFACE_ALL WHERE TRANSACTION_STATUS_CODE = 'R' AND BATCH_NAME = $param$.BATCH_NAME
The value for the Batch Name is got from Source - IMPORT and Value - PA_TRANSACTION_INTERFACE_ALL.BATCH_NAME
Error Message Setup
SELECT MEANING FROM FND_LOOKUP_VALUES WHERE LOOKUP_CODE = $param$.TRANSACTION_REJECTION_CODE
The value for the Transaction Rejection code is got from the Source - INTERFACE and Value - PA_TRANSACTION_INTERFACE_ALL.TRANSACTION_REJECTION_CODE
My setups seems to be correct in all respects. Now, i perform the testing as follows -
I uploaded a data which would fail validations during Import. My expectation is - The Error Message (specific to the validation) should be displayed to the User. But it does not happen. Instead it shows the standard message (like no of rows uploaded successfully)
Is there some configuration missing. Some valuable input required. we have already applied patch Patch 9790225: Oracle Web Applications Desktop Integrator 12.1.3 Release Update Patchset 1
Regards
Pradeep

It looks like your data is corrupted. Take a look to this articles and try to reset the information in your account: [[Replace your Sync information]]

Similar Messages

TS1140 I am having issues with an iPhoto book that I created. When I try to purchase it, it fails to load for payment, yet I don't see any error messages in the book itself? Help!

I can't seem to get my photos for an iphoto book to load. It will assemble the pictures, but at the last step, it never progresses with loading the photos - I always get an error message.

how doe the preview work?
Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
what is the error message?
LN

Error message in the IDOC at item level

Hi,
Iam working on IDOC.when idoc failed i get the that idoc error message and displaying in the report at header level.But my requirement is to diplay the error messages at the item level.Is it possible to display the error messages at the item level?For example for IDoc number is 30000045.For this idoc number 7 line items is there like 1000,1001,1002,1003,1004,1005,1006,1007.i want error message line item wise.Kindly suggest me.
Regards,
Sujan

hi sivaprasath,
write the custme code as per your requirement so that it will do..user exit or badi .
~linganna

Suddenly, I am seeing an error message that reads: "The iTunes Library cannot be saved. An unknown error occurred (-54)". Can anyone tell me what that means?

Suddenly, I am seeing an error message that reads: "The iTunes Library cannot be saved. An unknown error occurred (-54)". Can anyone tell me what that means? Am I in danger of my iTunes library being lost?

== Error -54 ==
From an OS9 reference, error -54 is a software lock on a file or a permissions error. (Some of the old codes still apply to OSX although there is no formal list of OSX error codes.)
First, try simply restarting your computer.
iTunes Library cannot be saved (Error -54) - https://discussions.apple.com/thread/1912814
Unknown error (-54) while syncing ipod - https://discussions.apple.com/thread/1082953 - problem was locked files
Why does iTunes keep showing a -54 error when I sync my iPad? - https://discussions.apple.com/thread/3727114
Error -54 possibly related to Touch Copy - https://discussions.apple.com/thread/3727114 - cleared by deleting preferences on iPad.

PI 7.11 - confusing error messages in the Default Trace

Hello,
Every day, I see these error messages pop up in the default trace ( all with location System.err ):
at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:314)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:96)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:115)
at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:55)
at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:57)
at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:977)
at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:41)
at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:67)
at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:69)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:355)
at com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImplp4_Skel.dispatch(P4ConnectorServerImplp4_Skel.java:64)
at com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImpl.invokeMbs(P4ConnectorServerImpl.java:60)
at com.sap.engine.services.jmx.MBeanServerInterceptorInvoker.invokeMbs(MBeanServerInterceptorInvoker.java:102)
at com.sap.engine.services.jmx.ClusterInterceptor.invoke(ClusterInterceptor.java:803)
.... and many others.
It all seems to start with this error:
java.util.regex.PatternSyntaxException: Unexpected internal error near index 16 number_of_nodes\
They all appear just once a day and all at the same time.
I already looked for possible causes or background jobs, but nothing...
Can anybody give me a suggestion?
Thanks a lot.

Hi Kevin,
indeed....You need to apply the following SAP Notes:
1749574 - Checking for the latest Configuration Wizard patch
1927916 - Registration of Mbean:ConfigurationExportKMC DefaultTrace
Afterwards restart J2EE engine. This helped in my case.
Best Regards
Harald

I am unable to open a project that I have worked on and saved. I get an error message that the file is damaged and cannot be opened.

I am unable to open a project that I have worked on and saved. I get an error message that the file is damaged and cannot be opened.

Leslie Tanaka
Travel and detours have kept me from following up sooner. If the problem that you wrote about still persists.....
Let us go back over that Adobe document regarding troubleshooting damaged projects.
3. Delete the Application Preferences
Where you able to follow that path and delete the Adobe Premiere Elements Prefs file at the end of the path? And, after you did, did the saved/closed programs still refuse to open? If you could not carry out this procedure, what were the limiting factors that kept you from do
7. Test to see if individual media files are causing the problem.
That is an important one. How far did you get into following the instructions given in the document? If you could not complete the test, what was the major block that prevented you from doing so?
I want to make sure that we have gone through everything in that document and ruled all factors there in or out. If it was a matter of you not understanding the instructions, I am hoping that the above will channel you questions to me so that I can clarify anything that you did not understand in the Adobe document instructions.
I do not recall if I asked previously. Even if you cannot open all your saved/closed projects, can you still open a new project and save/close it? Maybe even reopen it?
Please review and consider.
Thank you.
ATR

Error message in the middle left hand of portal

Hi,
      I am getting the following kind of error message in the middle left hand of portal(Quick Create),
"<b>Error occurred. Contact the administrator and report the exception ID in the log: 00145EC53868009000000B93001820000004265B5BB688B3</b>.
     Can any body tell me the reason for causing this error message and how to rectify this error message.
     This requirement is urgent
     Thanks in advance.
Regards,
Ravi.

Hello
Can you see the defaulttrace file for more details?
Open up Visual Administrator and go to Log Viewer. Then open up the Defaulttrace file. Generate the same error message and look in the file for more details.
What do you see?
And of course.. What did you do to make this error ?
Best Regards
Kristoffer Engh

My iTunes won't open on my laptop. Error message says The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes. Help Please!

My iTunes won't open on my laptop. Error message says The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes. Help Please!

See Empty/corrupt iTunes library after upgrade/crash.
tt2

I had just put the finishing touches on my 36 minute documentatary when I got an error message that the external 1TB HD I was using to store the project had been ejected improperly (must have shaken a cord). The result is that the project would not load

I had just put the finishing touches on my 36 minute documentatary when I got an error message that the external 1TB HD I was using to store the project had been ejected improperly (must have shaken a cord). The result is that the project would not load in the edit Projects window. I can see the file in the finder window and it will launch iMovie but the file itself will not load in the projects window.
I have contacted apple support and they tried to do a few things... to no available.
With my limited knowledge of file structures I assume that the header file must be corrupt.
Is there a 3rd party utility that can decompile and fix the file structure so it will load properly. I've been working on this project since june and would hate to have to redo the whole thing again.

I had just put the finishing touches on my 36 minute documentatary when I got an error message that the external 1TB HD I was using to store the project had been ejected improperly (must have shaken a cord). The result is that the project would not load in the edit Projects window. I can see the file in the finder window and it will launch iMovie but the file itself will not load in the projects window.
I have contacted apple support and they tried to do a few things... to no available.
With my limited knowledge of file structures I assume that the header file must be corrupt.
Is there a 3rd party utility that can decompile and fix the file structure so it will load properly. I've been working on this project since june and would hate to have to redo the whole thing again.

Hi I have a question about shooting in Raw with my Canon EOS 6d. I'm in the process of learning photography and my goal was to start shooting in raw. I have Photoshop CS5. When I tried to edit my images in raw I received an error message stating, "The pho

Hi I have a question about shooting in Raw with my Canon EOS 6d.
I'm in the process of learning photography and my goal was to start shooting in raw.
I have Photoshop CS5. When I tried to edit my images in raw I received an error message stating, "The photoshop camera raw plug-in did not recognize the format. If these files are from a camera, you may need to update your camera raw plug in."
In researching the issue I read that to edit in raw you need a camera model requirement of at least 7.3 which only works with CS6. My version of CS5 is 6.0.0.205. Being new to all this I see that my options are to upgrade to CS6 or convert by using DNG converter and paying a monthly fee. Two things I know nothing about and don't know which is would be more beneficial.
I'd appreciate any advise on which route to go and how upgrade and what it may cost. THANKS in advance!
Heather

In researching the issue I read that to edit in raw you need a camera model requirement of at least 7.3 which only works with CS6.
That is correct. Your camera was first supported by Camera Raw 7.3. Camera Raw 7.3 will not work with CS5. You need CS6 or CC.
Being new to all this I see that my options are to upgrade to CS6 or convert by using DNG converter and paying a monthly fee. Two things I know nothing about and don't know which is would be more beneficial.
I'd appreciate any advise on which route to go and how upgrade and what it may cost.
It all depends on your preferred workflow and your budget.
Using the DNG converter is free. There is no monthly fee. You use the converter to convert all Raw files from the EOS 6D to DNGs then edit the DNGs in CS5. That's an extra step every time - every photo. Some people don't like the extra step. Others don't mind.
Camera raw, DNG | Adobe Photoshop CC
Or you can upgrade to CS6 (non-Cloud) and pay the upgrade fee
Creative Suite 6
Or join the Cloud and pay the monthly fee
Or join the Photoshop Photography Program (US9.99/month) and get PS CC+LR

How to set error message inside the loop...module pool

Dear all,
     Am creating Table Control without wizard. In that i am looping the values, that is, Once if i entered 5 digit values means, 12345-08... the values should be stored in z-table like this 12345,12346,12347,12348 . That is 5-8 it as to update in z table. for this i createdloop at itab and inside that i written a code to count the value and all. and also its clearly updating the value in ztable too. now i want to know, if once again i entered the same value means, like 12345-08.. it as to show error messge.I dont know how to set the condition with error message inside the single loop .... Its all comes under module pool program.
Thanks,
Santhosh.R

If i understood your doubt, here goes the answer.
LOOP AT itab INTO wa_itab. " This is your loop
l_tabix = sy-tabix. "l_tabix receives the line of the loop
READ TABLE itab WITH KEY itab = wa_itab. "itab is the same tab of your loop
IF sy-subrc EQ 0 AND l_tabix NE sy-tabix.    "Here the sy tabix have the value of the read table.
*     Here you do your error treatment.
ENDIF.
ENDLOOP.
Explanation: When you are looping your internal table, you use a READ TABLE to see the already recorded registers. If the read table finds one register (sy-subrc EQ 0) and the this register is not the one of the current line (l_tabix NE sy-tabix). It means you have a duplicated register.
Maybe there is someway easier to do this, but this is what i thought now.
I hope this was your doubt hehe.
Thales Schmidt

After editing a photo, I sometimes get an error message that the "File is empty". Can revert to original and start again, but file disappears after editing.

So frustrating! I open the photo. Edit by cropping, adjusting color, etc. It's perfect. I click DONE and move on to the next. When I come back, the first photo is gone. I can see it in the album but cannot open it. When I look at the file information, it shows zero KB. If I move it to the desktop and try to open it, the error message says the file is empty. I can revert to original and there it is. Edit again, and again it disappears. What am I doing wrong? I am using iPhoto 09

You shooting with a Nikon? We've seen a few examples of this bug with Nikons on 09 and 10.6, with no solution except to upgrade.
Regards
TD

When restoring an iPhoto library I got an "unexpected error" message and the operation could not be completed. Is my best choice to try again?

One of my external hard drives died. I had several iPhoto libraries in it. Fortunately, I used Time Machine to backup to a Time Capsule and I can see all the iPhoto library icons in Backups.
When restoring the first iPhoto library, after three hours, I got an "unexpected error" message and the operation could not be completed. Indeed, the restored library is smaller than the library in Backups. Is my best choice to try again and replace the restored library (which apparently must be missing some photos)? It would mean another 3 hours plus of restoration with fingers crossed...
Any suggestions? Thank you in advance!

I am always suspicious of using a different OS to the one that was used to run the backup.. ie if you used Snow L to backup then there is absolutely nothing wrong with using SL to restore.
Mount the TC sparsebundle and verify it using disk utility.
A5 here. http://pondini.org/TM/Troubleshooting.html
You might also like to load the widget in Time Machine so you get whatever the full error message is..
I cannot find any reference to the error code you are getting..
My recommendation would be to try it on a different computer.. restore the whole backup to an external drive large enough to accept the whole backup.
Use the manual methods pondini recommends.
http://pondini.org/TM/FAQ.html
Q16 17
Use ethernet only. Turn off wireless so it does not enter the situation.

Error message -48: The itunes library file cannot be saved.

Hello,
When I open up my itunes i get an error message 48 - the itunes library file cannot be saved. All my data is there - music, podcasts etc. Just wondering if this error message means anything, if so what, and what I can do to fix it?
Thanks!

I just called Apple Support and I think they helped me, but I'm still waiting to see if the error message returns. I was experiencing the same problem. Whenever I started iTunes, I would get the -48 error message. Everything else was working fine. Apple Support instructed me to delete some files from a folder and restart my pc. I did this and it seems to have worked. The folder is on my C:/ drive. Using Windows Explorer, I went to my C:/ drive and then opened the following folders in this order: "Documents and Settings", "Administrator", "Application Data", "Apple Computer", "iTunes", "iPod Software Updates". Inside the iPod Software Updates folder, I found four files which I deleted. I then emptied my trash can and restarted my pc. After I restarted my pc and opened iTunes, the error message did not come up. So it looks like my problem has been solved. Just some minor glitch having to do with the last update. I should mention that I did just get an iPod Classic 80 gig which replaced my 30 gig iPod Photo which just died.

I got a problem on installing iTune-64bit on WIndows 7, error message says the folder "itunes" is on a locked disk or you do not have write permissions for this folder.

I got a problem on running the iTune 64bit on Windows 7, error message says " the folder "itunes" is on a locked disk or your do not have write permission for this folder. Any one ran into this problem ?
It worked before.

Open Disk Utility via Spotlight or in the Applications folder stored within the Utilities folder. Close all applications and 3rd party software and choose "Repair Disk Permissions." Reboot the computer when finished, and test to see if the issue is resolved.

Do we see an Error Message at the Spreadsheet Level?

Similar Messages

Maybe you are looking for