Doc change badi when storage loc change

Hi
How can i trigger doc change badi whenever storage location changes?
Thanks
Joe

Hi,
The Doc Change BADI will get triggerred automatically before saving the document (Create / change operations).
So, irrespective of any data change, this BADI will be triggerred automatically (provided if implemented and proper filters are set).
Hope this clarifies your query.
Regards
Kathirvel

Similar Messages

Trigger change badi when click a custom button

hello guys i want to trigger the change badi when a user clicks on a button. Any help would be create?
I am using the set change by client setting it to true and then firing the refresh but it is not working? Any clues? Thank you.

As I told you in that linked thread, I'd suggest trying to use SET_CHANGED_BY_CLIENT method on the context of your webdynpro. This is sufficient to make the system aware of a change and trigger the CHANGE badi.
As far as I've observed doing my tests, the CHANGE badi is then triggered after an event that will follow the SET_CHANGED_BY_CLIENT execution.
So I'd suggest two test:
- pre-exit of the method you trigger when the user press your custom buttom: set_changed_by_client and then execute your code. See if the badi is then triggered;
- if not: you could "force" a subsequent action after the button press, for example, a simple REFRESH of the view. Then I'm sure that, after the set_changed_by_client method, the badi will surely be triggered.
Please be aware that I'm absolutely NOT a guru on these arguments, so I'm trying to give you some workarounds I implemented on an SRM 7 system. Probably some guru will have better and cleaner solution for your task, but as far as I've seen, these ones should meet your needs.

Multiple Insert in Doc Save Badi when publishing Bid Invitation

Hi to all experts,
Currently i need to track changes in bid invitation. What i did is using doc save badi to get the value (bbp_bd_bid_getdetail) and compare them with the value i save in a cutom table.
Then the problem come in. Even if there is no changes, the badi will still cause an insert into my custom table. I used the debugger to go through the code and it never go to my insert statement.
However once i finishing running the dubugger, my custom table will have a new entry...
Why is this happening? IS it due to the different GUID in the bid invitaion?
Points will be awarded generaously, thanks again for reading.

Hi Disha and Marcin,
Thank you so much for your prompt replies. I have awarded points. We are using SRM 5.5.
Correct me if I am wrong, I have thought of using the doc_change badi but how do I confirm the changes should user cancel the transaction?
Hi Marcin,
I am new to this term LUW, please elaborate more on this.I have checked and confirm no other program or badi called my function modules.
I have suspected that the badi was called n-times and insert a line into my custom tables. I tried using modify in place of insert so that such problem can be avoided but this was not successful with saving longtext.
What I notice is after the system undergo a patch, the doc save badi started to behave in this way?
Please kindly advise, all SAP experts! Thank you!

Bug: docs disappearing offscreen when screen resolution changes?

Version 10.1, OS X 10.6.8 running on MacBook Pro mid-2010 with high-res 1680x1050 screen. When I view a pdf on my 27" Apple Cinema Display connected to my MacBook Pro as the sole display, then disconnect that display and use the MBP's built-in display, the document window essentially becomes invisible. Quitting Acrobat, relaunching, and reopening the document do not fix the situation. The only workaround is using an app called Optimal Layout which allows me to move windows via keystrokes -- I can move the window until it appears. When it does appear, only the title bar is visible (as if the old "screen shade" function from OS 9 were still functional), but clicking the green "zoom" button causes the window to reappear in its entirety.
This happens every time I switch between displays.
Does this bother anyone else?

Has anyone who switches between an internal laptop display and an external display as sole display seen this problem?

Colours change badly when LR2.5 image sent to Photoshop CS3

When I right click in LR on an image and "edit in CS3" the image opens in CS3 with a horrible magenta and/or blue colour cast that is difficult to remove.
I have set LR to export in AdobeRGB, and CS3 edits in AdobeRGB.
This is new behaviour, since I got a Canon 50D but I assume this is coincidence.
The effect is variable, worse on some images than others, so I can use no automatic workaround to fix the shift.
It is ruining my workflow. I've searched on everything I can think of in forums and help.
- Win XP SP3
- both screens calibrated with GretaMacbeth Eye-one
I observe that:
a) even the dialog boxes in the two programs have completely different colours, not sure if that is supposed to be so.
b) CS3 says that my CS apps are not sync'd for consistent color. I don't know what other apps I may have, or why this is so.
Attached -
- my external edit prefs and CS3 colour settings
- sample image screen capture in LR
- same image screen captured in CS3
Thanks
Julian

This seems to have died. I've answered a few questions but no responses to those reqested infos, and no answer forthcoming.Some responses suggest that my post has not even been read properly and the only suggestions made have been inappropriate to my posted info.
Can anyone tell me how I get effective help for Adobe products? I am more than jaded with the facts that:
- Adobe software in general and Lightroom especially has almost useless help files/website. Adobe seems to rely on a) 3rd parties and b) a collection of informal only sometimes professional often independent (uncoordinated) resources that are as disparate as they are confused to provide help and usage training. The help available from "Help" menu item is incomplete and often, if not mostly, missing the point for which you are seeking info.
- Adobe software including Acrobat reader (inside Firefox), CS3 and Lightroom are the ONLY softwares that crash my system or do not work reliably.
- Adobe phone and email support is entirely, completely and fully useless for anything beyond certain standard problems. The only offered solution to anything I've ever rung or emailed about has been "uninstall and re-install" after demanding enormous amounts of information that was probably irrelevant or ignored but consumed considerable effort and time to provide.
- when you DO uninstall and reinstall Photoshop, you find it is the only software I know of that routinely loses all your settings and actions in the process.
- and so far, uninstall and reinstall has never resolved any Adobe problem on my machine.
- Adobe more than any other provider seem to rely on new PAID upgrades as the suggested means of resolving bugs and other problems that are intrinsic to the software, and Adobe don't continue to maintain older versions.
So - here I am with what is to me a serious problem, and I have no visible means of useful tech support.
People like me are always being criticised on these forums for being cross and frustrated, with smooth talking smug folk saying that you'd get better results if you were polite. The trouble is it is difficult to remain polite when you see no available solution, a lot of time taken up and no APPARENT determination by Adobe to provide support that actually meets people's needs, or at least people with non-standard problems.
I don't believe I've been rude here, but it's now 4 days and I'm no nearer to solving the problem.
Could someone suggest how to get effective help with this problem, or other problems from Adobe?
Thanks
Julian

How to stop symbol-content from changing size when symbol size changes?

When I change the size of a symbol, the content is also resized. I want my symbol to act as a viewport: when I make the symbol half as high, the content shouldn't be transformed, you only should see half of the content instead of transformed content. Make the symbol's boundaries act as a cropper, if you get what I mean. How do I do this?

Hi Jack,
I think (not sure though) that the Library Item is causing the problem. I never use the Library Item because server side includes are far more efficient and need less maintenance.
Have a look here http://foundationphp.com/tutorials/sprymenu/ssi.php
If you have PHP serverside scripting language, use DW to add serverside includes using PHP.
Getting back to your original problem, try without the Library Item and see if DW still changes the code.
I hope this helps.
Ben

Program monitor changes size when Motion controls change. Turn this off please?

Hi. I'm running Premiere Pro CC on a fairly new (~6 mo old) iMac with 16 GB ram, SSD, Mavericks, the works. Everything's been great so far.
However, I'm having an issue whenever I use the Motion Effect Controls in the Program monitor/timeline. Any time I change a position or scale, the program monitor jumps from 16:9 to 4:3, and doesn't display any type of screen safe, so I have no idea where I'm actually placing/moving the item. This is a real bother, and it never was an issue before. Can I turn this off? Please help!

I've never seen anything like that. I don't know how you'd even make it start!

In ical why does my wife get an email everytime I update our home calendar but when she makes changes I don't?

I have shared a calendar with my wife aptely called "Home" to which every time I update or rearrange something she gets an email, I understand that this is quite useful for informing her of any changes but when she makes changes I receive no notifications/email. The problem I/she has is that when updating especially on the mac I change alot of things very quickly and she ends up with a flooded inbox informing her of small changes such as I've changed the time by half an hour or maybe a spelling has changed, does anybody out there know how to turn off the emails, we both regulary check the notifications bar on our ios devices and can see whats planned for the day etc so why burden the servers in the sky sending one way emails?? Any assistance would be greatly appreciated guys

OK, I don't have the exact same problem, but here are a few things you could try.
1. Go to www.icloud.com and login. Select your calendar from the icons and you will then see the cogwheel in the top right corner. Click on it and enter your settings. Under ADVANCED, there is a tick box saying "Send me a copy of event invitations and updates"
2. On the shared calendar on the left hand side of the calendar you are in, it should show a list of your calendars. The shared ones are green whilst the others are just white/transparent - Click on the green one of the calendar that is being shared (The clarify, this needs to be done within your wifes icloud, not yours and she needs to click your "Home" calendar green bit). This opens up the Tick box "Email me when this calendar changes" - deselect this.
Good luck.
For what its worth, here is my problem. I keep getting invitations for all my girlfriends new appointments. They are coming up in the same invitations box that you get notified in when someone invites you to a lunch where you select reject, accept etc. But these just have an OK select button. I can't seem to find anything that rectifys this, and it has only happened since I upgraded to Mountain Lion, but my girlfriend has not.
There is nothing on the web to describe this problem so far and I have gone through every setting trying to rectify it. If anyone can help on this one, that'd be great.

Send a Change Document entry when an equipment change its status (IE02)

Hello experts,
In the transaction IE02 (Change Equipment), when a user changes the equipment status, for instance, from Active (ACTV) -> Inactive (INAC) when the SAVE button is pressed I need to post a Change Document entry (CDHDR and CDPOS).
I've already identified the user exit EXIT_SAPMIEQ0_002 which is triggered when the SAVE button is pressed in IE02 transaction. I cannot read the new status value.
At that moment I can read the old status (which has been change until the user exit finalized) but I don't find a way to check if that old_value <> new_value.
Does anybody knows a way to achieve this?
Thanks in advance,
CL

Stauts changes are tracked in the table JCDS and not in CDHDR and CDPOS.
You will have to check the box for Change documents in the configuration for equipment status ( this is done on equipment type's status profile ). The status change tracking will not happen until it has been set there.
Thanks,
Srihari

Sale Order change BAPI - Storage loc not updated

Hi Everybody,
Iam using "BAPI_SALESORDER_CHANGE", to change the sale order items.
First iam calling above bapi with switch B, for new pricing & then second time for material change.
When i change any material number, it is getting updated correctly.
But the storage location, even though iam passing in the bapi it is not updated, & is blank - updation flag is also passed.
When i execute sale order change again it is updated - ie, for any material change for first bapi call, storage loc is not updated - for 2nd bapi call storage loc is updation - for same input in both the cases.
Is there any way to update the storage loc is first call of sales order change bapi.
Below is the parameters iam passing in bapi :
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
    EXPORTING
      SALESDOCUMENT      = LS_SALESDOCUMENT
      ORDER_HEADER_IN    = LT_HEADER_IN
      ORDER_HEADER_INX   = LT_HEADER_X
    TABLES
      RETURN                            = LT_RETURN
      ORDER_ITEM_IN               = LT_ITEMS
      ORDER_ITEM_INX             = LT_ITEM_X
      ORDER_CFGS_REF          = LT_CFGS_REF
      ORDER_CFGS_INST         = LT_PARTS
      ORDER_CFGS_VALUE     = LT_VALUES
      ORDER_CFGS_BLOB        = LT_CUBLOB
      ORDER_CFGS_VK            = LT_CUVK
      ORDER_CFGS_REFINST   = LT_CUREF
      SCHEDULE_LINES            = LT_SCHEDULE_L
      SCHEDULE_LINESX         = LT_SCHEDULE_X
      ORDER_TEXT                   = LT_TEXT
      CONDITIONS_IN                = LT_CONDITION_L
      CONDITIONS_INX              = LT_CONDITION_X.
Any help is appreciated.
Regards,
Nagarajan.J

Hi,
Storage location is updated only when same sale order bapi is called another time with required details.
rgs,
Nagarajan J

Doc Change Badi

Hi All,
Doc change badi is triggered twice. Once with old values and once with new values.
How will I know when this badi is for new values. Is there any attribute showing the values are edited.
I want to know this for item check badi also as i want to validate badi for the new values and not for the old values of the fields.
Thanks.
Edited by: santosh.p on Jan 30, 2012 7:50 PM
Edited by: santosh.p on Jan 30, 2012 8:05 PM

Hi santosh,
As I konw, the imported internal table for items only contains the changed items.
You can try to use FM 'BBP_PD_SC_GETDETAIL' to get the last changed item data, then compare them.
Hope this can help you!

Change storage loc in Sales order PO

Hi to all,
Please help me in solving this problem, actually we have created a PO by referring a Sales Order PR with Acc cat-> 'X' and Item Cat-->'S', now the user wants to Change the Storage loc, but the storage loc is grayed out that is non editable, i want to know whether this is a standard functionally of thirdparty PO with item category 'S' or else any configurational changes need to be done. for your information the PO is manual PO, I searched all over the scn i could not able to find it plz if this question is already posted plz let me know the link of the question .
Thanks in advance

Yes. It is a standard behavior. You can't use the storage location field for item category S.
Its because, the material will direct goes to delivery address location instead of storage location.
Normally, system will not accept storage location for the PO line item which has the item category S.
If you want to keep the storage location for your reporting purpose, then you can use the storage location field as per your requirement.
Go to path OLME-Purchase Order-Define Screen Layout at Document Level. Double click on PT5F field selection group.
then double click on Basic Data, Item.
Then make the storage location as per your requirement (Optional or required).
Then you can able to enter or change the storage location in ME21N or ME22N.
But remember, it will not effect at the time of MIGO.

What is the best way to have Mac setup for sync-ing 2 calendars? Any way to change? When we 1st got our Macbook we unknowingly set it up wrong--as 2 separate users, with separate everything. Good for contacts and email, bad for calendar, photos, music.

What is the best way to have Mac setup for sync-ing 2 calendars? Any way to change? When we first got our Macbook we unknowingly set it up as 2 separate users, with separate everything. Now I have an iphone and I want to sync calendars but not contacts or email. Any direction you could give would help! thx

Anyone...anyone? Bueller...Bueller?

In DOC CHECK BADI: Check if PO has a SC when coming from a BID

Hi Experts,
Please consider this situation and recommend best possible approach.
From Sourcing, I raise a BID and then create a PO from the BID.
While PO creation, I need to check if this PO had SC and if so include the SC requestor in the approval if the price has increased while Bidding when compared the created SC.
Here I am facing a challenge - When executing the DOC CHECK BADI, the FM: BBP_PROCDOC_GETDETAIL does not result any HEADER_REL itab values that shows any history details of the PO document. Whereas by the time the logic moves to the Workflow BADI, this same FM returns values (SC and other details).
My Query: While creating from a BID, How can I check if this PO is generating out of a SC in the DOC CHECK BADI.
Thanks in advance.
Vj

Hello Asha,
You can check this BADI "BBP_ITEM_CHECK_BADI" and this badi is called when
u2022 a new item has been created,
u2022 an item has been changed or the document is to be checked
Regards
Sameer

How to trigger a event when WBS gets changed in Cj02

Hello,
I have a requirement where I need to send create an idoc and send the idoc to external system when WBS is created or changed. Currently, I have the following setup:
   - I have created a YBUS2054 as a subtype of BUS2054 using SWO1
   - YBUS2054 has been delegated to BUS2054
   - created an CHANGED event in the YBUS2054. This event is implemented and then released
   - created a type linkage (object type=YBUS2054, event=CHANGED, receiver type null, and receiver function module = zz_create_wbs_idoc) using SWETYPV. This function is supposed to create an idoc when CHANGED event occurs. I just don't know how to trigger the event to occur.
   - all the port, define idoc type, logical system, and etc are setup
   - when I try to create an entry in "Event for Chagne Document" using SWEC with change doc object=PROJ, business object type = YBUS2054, with on change, I get "Key for change doc object PROJ and business object type YBUS2054 are incompatible".
I tried various configurations, and I was not successfully in creating an event on CHANGED
can you please advise what I am missing in getting the changed event to trigger?
Thank you in advance,
Shawn

Hi,
If the change doc doesnt exist, check if you can create an event using BSVW.
Also use the event log to see if there are other sap standard events happening.
I checked the package belonging to CJ02 to see if there is something useable, but didn't find anything: CN_PSP_OPR
If there are no sap standard ways to get an event, you'll have to find a badi/enhancement spot and include some coding to start the event using fm SAP_WAPI_CREATE_EVENT.
Kind regards, Rob Dielemans

Doc change badi when storage loc change

Similar Messages

Maybe you are looking for