Document doesn't have document category C in follow up document

Hi,
I have created a Return order in Services, Now on the Return order i have a requirement to create a follow up document in case of warranty,1st either we can issue a credit Note Or we can make a subsequent delivery free of charge on the same Return order, how ever when the follow up document is created it gives an error Document category is not C,but when the order is created individualy means without any preceding document subsequent deliver or credit memo both the orders are succesfully replicated.
I tried to get the category which was maintained as 'H' for subsequent delivery to "C" even after that the error is still coming the same error is coming for both the follow up documents .
Please suggest the same.
Message no. CRM_ORDER_MISC 020
Transmission log
Document 5000044 doesn't have document category C but (Notification E V2 068)
Sales document 0000080051 was not changed (Notification E V4 219)
Regards
Nikhil Chugh

Hi,
from crmfiltab
I get the message only when creating the return as a follow-up. Both the sales order and return replicate without error if I create them separately.
regards Camilla

Similar Messages

How do I change a document that I have saved as a PDF file in Documents? I can get it to OPEN but can't do anything to it.

How do I change a document that I have saved as a PDF file in Documents........I can open it but can't do anything with it.

A PDF is really an electronic print of your document & is not intended for future editing. You should always save a copy of the original document in the program that created it & use that for edits. You can then export or print the revised document to PDF, again saving the original.

My numbers document doesn't have some formulas

My numbers document is missing some of the formulas. And I can't open main document

That's 16GB before you take out the 3-4GB occupied by iOS and the bundled apps that come with it. Plus the 16GB quoted on the box is measured in decimal GB (10^9 or 1000000000bytes) whereas iOS reports the available/used storage in binary GB (2^30 or 1073741824bytes) instead.
See How OS X and iOS report storage capacity - Apple Support for more information.

The document does not have a valid format.

I created a special format document when I had Pages '08. I needed the proportions of the document to match the special paper on which the document would be printed so I created a special size for my document rather than 8 1/2 x 11. If I remember right it was closer to 8 1/2 x 13 or so. Anyway, I have now upgraded to Pages '09 and can no longer open any of these special format documents. I have versions of a couple of the documents that were created in Pages '08 without the special proportional size page and they open without issue. However the special size documents all get "The document does not have a valid format" and will not open. I really NEED these documents. I have seen some posts about renaming to a .zip and then something about an index file but I don't understand where this index file might be and what good it will do to open it. Also I know the files exist because they are still showing their original file sizes (not 0 MB). Any assistance would be appreciated.

Don't continue to search fruhulda.
I never saw such files.
The only things which I may recognize are :
the strings :
mluc
(10) nbNO --> Norvegian
(16) svSE --> Sveridge
(4) fiFI --> Finnish
(1) daDK --> Danish
(17) zhCN --> Chineese(1)
(5) frFR --> French
(8) jaJP --> Japanese
(3) enUS --> English (US)
(12) ptBR --> Portuguese (Brasil)
(15) esES --> Spanish
(18) zhTW --> Chineese(2)
(14) ruRU --> Russian
(9) koKR --> Korean
(6) deDE --> Deutch (Germany)
(2) nlNL --> Dutch (Nederland)
(7) itIT --> Italian
They are the symbols used to identify the languages used for 16 versions
Two others are missing:
(11) Polish (Polska) missing
(13) Portuguese (Portugal) missing
I found also
iMac in plain ASCII and .i.M.A.C (dots are in fact NIL characters) which is the Utf 16 representation of iMac.
During a few seconds I thought that it was a piece of System Files but the page thumbnail must be available somewhere so that the Finder is able to display it.
I will send these genetically modified documents to Apple Bugs Hunters.
Yvan KOENIG (VALLAURIS, France) lundi 31 janvier 2011 17:46:39
At the very end there is also the trailing string which fool the message parser:
the formula : *_Copyright Apple, Inc., 2010

Sending manual Email creates a follow up document of type Complaint.

Here are the steps which I have followed:
1. I login to IC WebClient and create a complaint. Close the Browser.
2. Login back to the ICWebClient. Click on Inbox and open the last created complaint. Click on Email (On the NavBar) and manually send an email to any user. Click on End button and close the browser.
3. Login back to the ICWebClient. Click on Inbox and do a search.
You see there is another complaint document created which is actually a follow up document for the complaint which I have created. And this follow up document stores the email sent. <i>The problem is that two documents of type complaint are getting created. One a main document and the other follow up document which stores the email sent.</i>
What we want is if the agent sends an email for a complaint, then we want all the emails to be stored as part of that complaint transaction document.
Am I missing any setting or is this is the standard behavior of SAP.
Message was edited by:
Rakesh Jain

Hi Rakesh,
Check this SDN post:
FM or Sample program to send email
Hope it will help
Thanks,
Arjun
Pl. Reward points........................

Problem in creating follow-on document (RFQ) for a bid invitation.

Hi Experts,
We have an issue while creating follow-on document(RFQ) for a bid invitation.
Process is as follows :
We have a bid invitation and sent it to two vendors. After this, created two responses one is accepted and another one is rejected.
Now the accepted bid is ready to "Create follow-on Document(RFQ)". But when we do this, the bid with rejected vendor also including in the follow-on document. This should not be the case.
The follow-on document should include only the accepted bid, but not the rejected bid.
Could anyone tell me how to achieve this ?
Thank you very much in advance.

As far as I understand, what you described is the standard behavior. ALL undeleted vendors are copied over to the follow-on RFQ regardless if their bids have been rejected or not. What you can do is to implement BBP_DOC_CHANGE_BADI for BUS2200 and explicitly remove the vendors which created rejected bids. Make use of the header field "copy_of_guid" to identify the originated RFQ.

On my mac when i click on pages, a new document doesn't open instantly but a window with my files open and then have to click on the left bottom new document in order to open one. How can i have directly a new document when i click on pages icon

On my mac when i click on pages, a new document doesn't open instantly but a window with my files open and then have to click on the left bottom < new document> in order to open one. How can i have directly a new document when i click on pages icon

How to open an existing Pages document?
Click Pages icon in the Dock to launch Pages.
When Pages is open, click File menu in the Pages menu bar.
Select “Open”.
When the select document dialog box opens up, highlight/select the document and click “Open”
at the bottom right corner of the dialog box.
s
https://support.apple.com/kb/PH15304?locale=en_US

How can I email a pages 08 document that doesn't have to be opened as an attachment by the recipient?? PS- I am using at&t mail.

How can I email a document created on Pages '08 that doesn't have to be opened as an attachment by
the recipients????
(I am using AT&T email)

"when I try save to PDF it just wants to save it to a file?"
Correct. The difference between "Mail PDF" and "Save PDF" is that the first opens a new Mail message with the file attached. the second saves a file which you may attach to an email message.
"Terrainathome is a good example of what I am trying to do."
Not familiar with Terrainathome, but my guess is that the company is sending an email message containing HTML code that downloads what's essentially a web page into the displayed message. To do that, you'll need a website, software that will produce the necessary HTML code, and recipients with email clients capable of interpreting HTML (which is 'most email clients' these days).
Regards,
Barry

How can I send scanned files, which are documents changed from doc to PDF, as documents that can be edited if the recipient doesn't have Adobe capabilities?

How can I send scanned files, which are documents changed from doc to PDF, as documents that can be edited if the recipient doesn't have Adobe capabilities?

Hi flaviusjack,
If you still have the .doc files, it might be best to send those to your recipients so they can be edited. Otherwise, you can use ExportPDF to convert the PDF files back to .doc format. But, again, that step would be unnecessary if you have the .doc files.
Best,
Sara

You have signed in to an iCloud account that doesn't have permission to open this documents

Hi,
All my Pages and Numbers documents on iCloud.com have suddenly become impossible to open. On iCloud.com (from IE10 or Google Chrome 40/Win 8) their file names appear scrambled (encrypted?) and if I try to open them I get this error message: "You have signed in to an iCloud account that doesn't have permission to open this documents". I can still open the files with Pages (2.5.2) and Numbers (2.5.2) on my iPad 2 (iOS 8.2). I haven't tried to access from my Macs.
I have tried to disconnect Pages on my iPad from iCloud, delete all files from Pages on iCloud.com, and reactivate the iCloud sync on my iPad. The files are uploaded but I still have the same problem.
I should say that I also cannot access my iCloud Drive ("Can't load iCloud Drive. There was a problem loading the application") or Photos (same error message).
The problem seems to be fairly recent as I have worked on my documents on iCloud.com for weeks without any problem (last successful access two days ago).
Since my last successful access I have updated my iPad to iOS 8.2 and modified a few Pages files from it.
Does anyone now what the problem might be?

Goto settings, iCloud, click on your user account at the top, login with your password, if you can successfully login, you will see your files are no longer encrypted. I had this issue when I upgraded to 8.2 on my iPad, for some reason I had access to iCloud drive, but the files were encrypted, it never prompted that something was wrong with my token.
Cheers

Everytime I try and sign into my iCloud account it tells me I can't log in due to a server error, but there is nothing wrong with my server . It also wont allow me to view any of my Photos or Documents that i have backed up.

Everytime I try and sign into my iCloud account it tells me I can't log in due to a server error, but there is nothing wrong with my server . It also wont allow me to view any of my Photos or Documents that I have backed up. Please help

Hi,
Are you running any Anti-virus software or do you have your firewall turned on? If so, disable them and try again. If that doesn't work, delete the iCloud account and then sign it back on again.
Make sure you are running the most current version of the iCloud Control Panel:
http://support.apple.com/kb/dl1455
Cheers,
GB

Hello and HELP! Over the years I have saved Invoices in my Documents. I have just tried to open them and all I am getting is " cannot be opened, Invoice**** is used by another user, do you want to make a copy?" That's on all my invoices.

Can someone help please.
I have just "lost" ( cannot open) all my saved Invoices in the Document folder. All I am getting is " cannot open, Invoice ** is used bey another user, do you want to make copy? " That doesn't work either. I can't get anything on the time capsule either. How can I reset to an earlier time? Or what can I do?
Thank you

Did you recently reinstall the OS then copy all your files back over? Do a Get info on one of the documents and see if your current UserName is listed and has Read & Write permissions. If not select the Documents folder and check that for Read & Write permissions for your UserName. If it doesn't have R & W permissions Add it so it does.

Why does mountain lion "bunch up" all my microsoft office documents that I have open when I hit f3? When I had snow leopard for example, if i had 4 or 5 different microsoft office documents open at the same time I could hit f3 and easily pick one of them

Why does mountain lion "bunch up" all my microsoft office documents that I have open when I hit f3? When I had snow leopard for example, if i had 4 or 5 different microsoft office documents open at the same time I could hit f3 and easily pick one of them.
Notice how in the photo, I can't identify which MS office document I would like to switch too. Perhaps since the Dashboard and Desktop windows are at the top of my screen now Apple doesn't let you have all the applications take up the full screen and be sized individually so that you can have a better idea on what to pick.
I like the idea of grouping to an extent... If you have a bunch of random things it was hard for me to decifer between what was safari, chrome, or word. But now that they grouped them like this, if you have multiple pages of one program running, you can't switch between those pages easily like before.

If I wanted to open any of my Applework documents I had to open them one at a time and resave them with pages. This could take weeks.I have 1000s of apple work documents.
You don't have to open and re-save every AppleWorks document you have right now. Just wait till you need one, then do it. The documents aren't going anywhere.
Am I dealing with Microsoft? This was a BIG surprise to me that Apple would release an OS without testing all programs.
Frankly, it is not Apple's responsibility to ensure compatibiltiy with every piece of software available for OS X. That is the responsibility of the software vendor. Lion has been available to developers for several months before it's release, so Microtek had plenty of time to update their software. Yet they did not. How is that Apple's fault? I think Apple was very generous to give you a refund for Lion.
I'm not trying to belittle your frustration but I do think your ire is misplaced.

Have converted pdf file into a word document. How do I engage the edit option?

Have converted pdf file into a word document. How do I engage the edit option?
jnicholasperkins@

Not stupid you! To, from PDF--it gets confusing!
To edit a PDF file, you need to use Acrobat. Depending on how much work needs to be done to the PDF, it may make sure sense to edit in Word, and then reconvert to PDF. Acrobat doesn't function as a word processor, so while limited changes to the text should be fine, extensive updates may not yield the results you're looking for.
That said, if you don't have Acrobat, you are welcome to try it for free for 30 days. For more information, see www.adobe.com/products/acrobat.html.
Best,
Sara

Billling document doesn't exits after system refresh -Message no. VF041

Hi ,
We recently refreshed our QAS system and from then on we are having a strange problem .
The issue is whenever I create a billing document ,it gives me a document number ,but when I try to view this in Vf02/03 it says "Document doesn't exists"
when I checked the dump in ST22 , it says "A RAISE statement in the program ( Z print program for Invoice)raised the exception condition "FILE OPEN ERROR".
I went and changed the Dispatch time to "Send with periodically scheduled job or Send with application own transaction " and it works . But Whenever the dispatch time is "Send immediately" it fails and throws a dump.
Have anyone come across this error .We are getting this problem everytime after refresh .
Thanks
Sridhar

Since the error message occurs in your custom (Z...) program, you will have to talk to your ABAP developers about that. My guess is that file name or path is stored in some table, which is probably wiped out or updated with Production data during the refresh. Then, when the program cannot find the file (because QA doesn't have access to PRD file server, for example) or doesn't have access to the specified location, it throws an error.
This is not an SD question and I seriously doubt anyone in this forum will be able to answer.

Document doesn't have document category C in follow up document

Similar Messages

Maybe you are looking for