Document for JMS Content Conversion

Hi,
I am fairly new to XI.  Am working with MQSeries as both sender and receiver.  The messages from/to MQSeries are not in XML format.  I will need to convert them into/from XML.
I know there are help/how-to documents on this topic but cannot find them.
Does anyone know their locations?
Thanks,
John

Hi John,
You can find the how-to document on:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
The same document is also available in service.sap.com: Media Library->Guides
Regards,
Bill

Similar Messages

  • JMS Content Conversion with spaces

    Hi
    I am using the JMS Content Conversion to transalte MQ messages ( they come from the Mainframe ),to XML Format.
    These messages are in fixed lenghts structure , the fields contain blanks (spaces)
    The adapter cannot deal with it,only fixed lenghts without spaces , the monitor gives the following error
    XI inbound processing failed for message at 2006-08-24|07:45:25.518+0200. JMS and XI identifiers for message are ID:414d51204445564d41494e31202020207aabe04420c2ea13 and bd95c760-3333-11db-b915-001125a56002 respectively. JMS adapter will rollback database and JMS session transactions
    Have some1 dealed with this issue? managed to solve it?
    Thx,Shai

    Hi Shai.
    Before you call him ,try to use the simple convertion in the sender JMS comm. channel,then after you got the first XML structure to the XI ,use a simple\advanced java function from the message mapping and get rid of the spaces if they bother you.
    Can you post the fixed width message you get from JMS I'd like to have a look.
    By the way ,how did you resolve the File content convertion with 4 levels?
    Regarding Yaki's phone...well I'm sure your Boss have it.
    8-)
    Again ,good luck.
    Nimrod
    Message was edited by: Nimrod Gisis

  • Sender JMS content conversion

    Hi
       In the sender JMS content conversion, I do not want Recordset name hence I specified,
    Parameter Name: xml.ignoreRecordsetName
    Parameter Value: true
    But am still getting the Recordset name in the payload...
    Is this working for someone or a bug?
    Thanks in advance!
    Amulya

    >
    Amulya Lewis wrote:
    > Hi
    >
    >    In the sender JMS content conversion, I do not want Recordset name hence I specified,
    > Parameter Name: xml.ignoreRecordsetName
    > Parameter Value: true
    > But am still getting the Recordset name in the payload...
    > Is this working for someone or a bug?
    >
    > Thanks in advance!
    > Amulya
    when using the MessageTransformBean do note that xml.ignoreRecordsetName does not work

  • DT for File Content Conversion scenario

    Hi Guys,
    I am working on IDOC to file scenario in which I want to know which type of DT should I go for?
    DT_Type
    ....Row
    ......Filed1
    ......Filed2
    ......Field3
    ...Row
    DT_Type
    Or
    DT_Type
    ..Details
    ....Row
    ......Filed1
    ......Filed2
    ......Field3
    ...Row
    ..Details
    DT_Type
    I am going for Receiver Content conversion as I need to produce Flat like, I have about 30 filed names and I am wondering is it possible not ot mention field names in Content conversion?
    What is the parameter to place to get a new line after each record? I am using row.endSeparator as 'nl' I am getting some special character instead of starting a new record in next line.
    Thanks
    Rajeev

    HI,
    The SOURCE IDOC strcuture is:
    IDOCNAME----
    1..1
    >IDOC--
    1..1
    >BEGIN--
    required
    >EDI_DC40--
    1..1 (it has sub nodes but not required)
    >E1KNAM1--
    1..1
    >SEGMENT----
    Required
    >Werks----
    0..1
    >Z1KNU2----
    0..1 (SUB SEGMENT OF E1KNAM1)
    >ZNUM----
    0..1
    >Z1ADD----
    0..7 (SUB SEGMENT OF E1KNAM1)
    >PostCode----
    0..1
    >E1KAVVM----
    0..999(SUB SEGMENT OF E1KNAM1)
    >VTWEG----
    0..1
    >LOVEM----
    0..1
    >E1KAVPM----
    0..999(SUB SEGMENT OF E1KNAM1)
    >KUNN2----
    0..1
    >Z1KAN--0..1 (SUB SEGMENT OF E1KAVPM---(SUB SEGMENT OF E1KNAM1))
    >NAME1----
    0..1
    Target File structure is:
    MT_Type----
    1..1
    Row--
    0..Unbound
    Filed1----
    0..Unbound
    Filed2----
    0..Unbound
    Filed3----
    0..Unbound
    Filed4----
    0..Unbound
    Filed5----
    0..Unbound
    Filed6----
    0..Unbound
    if IDOC contains one IDOC data then it has to generate one file .. If IDOC contains more than one IDOC information then it has to generate one file with multiple IDOC informaiton in it.
    how this can be achieved?
    Thanks
    Rajeev

  • Blogs for File content conversion in File Adapter

    hi all,
    Can some one give me the links for File Content Conversion for File to File Scenario. please.
    Thanks in advance.

    Hi
    For Sender
    /people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
    /people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
    /people/sap.user72/blog/2005/01/06/how-to-process-csv-data-with-xi-file-adapter
    /people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
    SAP Help for sender
    http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
    For Receiver:
    /people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
    SAP Help for receiver
    http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm

  • JMS content conversion issue

    Hi ,
    I am facing issue in JMS content conversion
    my file looks like as below...
    field1¤field2¤
    field1¤field2¤
    field1¤field2¤
    field1¤field2¤
    in module i have used this
    AF_Modules/MessageTransformBean   PLAIN2XML
    Transform.Class                com.sap.aii.messaging.adapter.Conversion
    Transform.ContentType     text/xml;charset=utf-8
    xml.conversionType           SimplePlain2XML
    xml.documentName            MT_data  
    xml.documentNamespace  http://xyz.com    
    xml.fieldNames                   field1,field2
    xml.fieldSeparator              ¤
    xml.processFieldNames     fromConfiguration
    xml.structureTitle                records
    but i am getting following error
    Error occurred while processing message: . Detailed error (if any):  com.sap.aii.adapter.jms.api.channel.filter.MessageFilterException: Transformer Conversion3.0.5226 Error initializing Class: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: (4408) Parameter xml.fieldFixedLengths or xml.fieldSeparator is missing (4409) Consistency check: no. of arguments in xml.fieldFixedLength does not match xml.fieldNames (0 <> 2) : TransformException: Transformer Conversion3.0.5226 Error initializing Class: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: (4408) Parameter 'xml.fieldFixedLengths' or 'xml.fieldSeparator' is missing (4409) Consistency check: no. of arguments in 'xml.fieldFixedLength' does not match 'xml.fieldNames' (0 <> 2)
    ironically when i use file adapter, its reading the file properly and converting XML as expected?
    Did anyone face this issue.....
    is this issue because of an extra ¤ .. is so... why its not giving issue with File??

    You need an additional hierarchy level:
    root
    -> row
      -> data
    In your example:
    <?xml version="1.0" ?>
    <ns1:HQ_reply_MT xmlns:ns1="urn:abc.com:HQToSAP">
    <b><row></b>
    <Data1> PIPXSDI3070 00000 00342YSDI3070PROCESS_MQSERIES HQXPLOR10 XPLOR.ORDER.RESULTS 0000 000000000000000086312 Invalid Process flag : 2. 065</Data1>
    <b></row></b>
    </ns1:HQ_reply_MT>
    Regards
    Stefan

  • JMS content conversion adapter module

    Hi All,
    In JMS Content conversion module Xml2Plain how do u put two new lines 'nl'.
    I am using localejbs/AF_Modules/MessageTransformBean in adapter module.
    If I put xml.record.fieldSeparator in parameter name and in parameter value if I put one 'nl' it gives me one new line. Now I require two new lines in my output text so I put 'nl' 'nl' in parameter value but it takes only one new line.
    e.g
    Vivek
    mumbai
    India
    John
    Delhi
    India
    Now I want the output as:
    Vivek
    mumbai
    India
    John
    Delhi
    India
    Thanks in advance.
    ravijeet

    try,
    xml.record.fieldSeparator '0x0D''0x0D'
    or
    xml.record.fieldSeparator '0x0A''0x0A'

  • Testing JMS content conversion

    Hi Experts,
    I have a scenario MQ-->PI--ECC.
    MQ sends a flat file and there is JMS content conversion used in sender JMS channel. On MQ side channels are not yet setup. Now I need to test if JMS content conversion is working properly. I cannot test by triggering flat file from RWB.
    Is there a way I can trigger a file from any third party tools and test the content conversion. Do you have any suggestions to make this test possible.
    Thanks,
    Avinash.

    Hi Avinash
    One option is to create a temporary File/FTP sender channel and use it in the sender agreement replacing the JSM channel. In the File/FTP channel, use the MessageTransformBean to achieve content conversion. This way, you can test out the content conversion parameters, and once the JMS server is ready, you can just swap it.
    Rgds
    Eng Swee

  • Sender JMS Content Conversion - How to process multiple records

    Hi All,
    I use a Sender JMS Channel with Content Conversion.
    My message structure is like this
    <root>
        <rec>    </rec>
        <rec>    </rec>
    </root>
    I have fixed length flat file with multiple records.
    i have given the parameters FixedFieldLength, FieldNames and StructureTitle.
    Which parameter i need to use specify the RecordDelimiter
    Because my input file will have more than record
    my input file -
    xxxx
    yyyy
    if i dont specify any delimiter value, in the module parameter,then for each newline of the file, a new mesage is created.
    <root>
      <rec>xxxx</rec>
    <root>
    <root>
      <rec>yyyy</rec>
    <root>
    But i want the output to be like this
    <root>
    <rec>xxxx<rec>
    <rec>yyyy</rec>
    </root>

    hi,
    You can do your FCC for sender JMS by going through page 5 of this document.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50061bd9-e56e-2910-3495-c5faa652b710

  • JMS Content Conversion - Need to control RecordSet per Message

    Hi All,
    I have done a simple JMS to JMS scenario with content conversion.
    I need to control  RecordSet per Message ( similarlly we do for the FILE . that is , Recordset Structure = Records, 500 and Recordset per message = 1)
    How to achive this in JMS adapter.
    Regards,
    B.Jude

    There doesnt seem to be an option for that in the messagetransforbean
    http://wiki.sdn.sap.com/wiki/display/XI/HowTo...ContentconversionmodulewithJ2EEJMS+adapter

  • File is not creating on the Receiver for File Content Conversion

    Hi,
    i have created a scenario with this blog
    /people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
    for sender side i am using File Content Conversion to read .txt file and on receiver side i need xml file i have done that.
    when i placed the file in the sender folder it gets picked up and i checked in Communication Channel monitporing in Runtime WorkBench it is processed Successfully. but no XML File is created on the Receiver side. i am unable to see the messages on SXMB_MONI also.
    Please suggest some ideas to solve this.
    Thanks,
    Giridhar.C

    Hi Giridhar.
    unable to see the messages on SXMB_MONI also
    If the file got picked and in Communication Channel monitoring RWB you can see that it is processed without any errors ,, then i feel it should come in come.Please check the Audit log in RWB, there you can see the error message if any.
    Please check the connection parameters in FTP and make sure that the same sender folder is
    not being used by any other scenario.If you have done any recent changes then do  a cache refresh .
    Please post if you see any error in content conversion.
    Regards
    Srinivas

  • Key field values for file content conversion at sender communicationchannel

    Hi all,
    I am working on  scenario File to Idoc.In this scenario at the sender side we configure the file content conversion for .CSV file.
    In the flat file i am having more than one orders, XI will pick the file and creates a separate Idoc for each sales order at r/3.
    We have similar fields "Order Item Number" both header and item.
    If we got '00000' on the Header item then it should create a new idoc at the r/3 side other wise it will create line item.
    Order item number will be 00000 for header but it will differ from order item to item.
    source structure
    Order Header
    Order type
    Sold-to-code
    PO number
    Order item number
    Order date
    AdresName1
    AdresName2
    Street and House number
    Postal Code
    City
    Country Code
    Filler
    Order Item
    Order type
    Sold-to-code
    PO  number
    Order item number
    Order date
    Product code
    Order quantity
    Item text
    Filler
    Now I have some questions....
    I don't have standard filed values to give the key fileds at source structure.
    I need to create the Idoc at r/3 system for each individual record.
    Is it possible to create new idoc with out using the Key filed value?
    If it is possible then how can i proceed with fcc?
    please give me your valuable suggestions
    Best Regards,
    satya
    Edited by: satyatanuku on Mar 3, 2010 1:41 PM
    Edited by: satyatanuku on Mar 3, 2010 1:42 PM
    Edited by: satyatanuku on Mar 3, 2010 1:44 PM

    Hi,
    Just check the Content Conversion Parameters-  Recordset Structure.
    If you have filled in this parameter with
    Header,1,Item,1
    then change it to
    Header,1,Item,3
    Regards
    Chandra

  • JMS Content Conversion

    Hi all,
    is possible to do content conversion in JMS Adapter of a file whit the following structure?
    -Root
    --Header
    ---A
    ---B
    ---C
    --Content
    ---Record_A
    D
    E
    F
    ---Record_B
    G
    H
    Record_C
    I
    J
    And if it's possible....how to do it?
    Thanks all
    Mane

    Hi,
    Refer to these links
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
    Check the how to guide provided by prabhu and also this link on the XMl To TeXtCoversion Module,
    http://help.sap.com/saphelp_nw04/helpdata/en/44/748d595dab6fb5e10000000a155369/content.htm
    Regards,
    Kumar.
    **reward points if helpful!!!

  • Doubt in jms content conversion

    Hi ,
    I m doing content conversion in sender jms channel.
    My input is of the format
    AAAAAAA#bbbbbbb#ccccccc#
    I want to map it to XML Structure
    <Root>
    <Record>
      <item>AAAAA </item>
    </Record>
    <Record>
      <item>bbbbb</item>
    </Record>
    <Record>
      <item>CCCC</item>
    </Record>
    </Root>
    Is it possible?

    Resolved

  • Inconsistent  Data for File Content Conversion

    HI XI Friends,
    Its IDOC to File Scanario,
    File is of .txt file..
    my IDOC contains 14 segments
    some times some segements will not come with Idoc..
    first three characters represent segment numbers..
    structure of txt file
    00112345       address1  street1
    00212345       office1      street1
    00312345       homw2     city2     street2
    if that IDOC doent contain 002..then .txt file should be..
    00112345       address1  street1
    00312345       homw2     city2    street2
    all Segement in that idoc are optional..
    if I use Fixed lengh in File Content Conversion then ther would be blank row  for 002 if that IDOc doent Conatin
    00112345       address1  street1
    00312345       homw2     city2    street2
    please guide me...how to use content conversion in this case..
    regards
    Munna

    Hi ,
    Thank you very much for your response..
    .txt file is of fixed lenths with no field Seperator
    IDOC contains number segements..
    the resultant txt file if we created first 3 segements data..
    00112345 address1 street1
    00212345 office1 street1
    00312345 homw2 city2 street2
    if we create 001 segment and 003 segement the text file should be
    00112345 address1 street1
    00312345 homw2 city2 street2
    but for new row of each segment ... endseperator 'nl' after first segemnt in Content conversion parameter and 002 segement values..and again endSeperator 'nl'...
    if we are not sending 002 segement data in the IDOC ..then it will give blank
    00112345 address1 street1
    00312345 homw2 city2 street2
    my requirement is if we dont send 002 segement data then no blank row .how to check if the segement is having data or not  and also how to declare it in Content Conversion parameters of File Adapters.
    please guide me
    regards
    Munna

Maybe you are looking for