Document iPhone Settings???

Hello,
I did several searches but did not seem to find anything that answers my question below. Which was actually a bit of a surprise. . .
Is there a way, an app, whatever, that will allow me to document all of my current iPhone 4s settings as set in the "Settings" app?
I know that they are saved when I backup my phone but I was wondering if there was a way to document those settings for reference purposes in a way that is printable or viewable on something other than the iphone?? I know I can do screen shots from the iPhone but that would invovle a LOT of screen shots . . . .
You may ask why would I want to do this??
Well, because of the number of folks who have had battery issues after updating from iOS 5.1.1 I have been hesitating to update to iOS 6 (6.1.3). Chances are I will not have any issue but, IF I should have problems, and I need to follow some of the suggestions that involve resetting all the settings or setting up the phone as a new phone, it would be nice to have my current settings documented to make starting over a little easier . .
Make any sense??
Thanks
John

I'm not aware of an app that will do this. You would probably have to take screenshots of your settings to document them.

Similar Messages

Trying to download iTunes 10.4.1. I have windows xp. iTunes would not load. I followed the directions from this sight to uninstall everything. When I try to install, I get this message: C:\Documents and Settings\Kelley\Local Settings\Temporary Intern

launch so I am trying to reinstall. I followed the directions from this site about uninstalling and deleting files and making a backup. When I try to
install I get this message: C:\Documents and Settings\Kelley\Local Settings\Temporary Internet Files\Content.IE5\AFYW6D11\iTunesSetup[1].exe is not a valid Win32 application. I click ok. Nothing happens. Any ideas?

Hi - thanks for your help and sorry not to have replied before - I've been away.
I use mainly Chrome but also tried IE8 just in case - no difference. However I finally remembered that when I had a similar problem downloading/installing OS4 for my iPhone (which crashed it and caused total lockup for about 4 days, resolved only after hours of calls to iPhone helpdesk) it turned out that the problem was caused by my home wi-fi connection. When I hard-wired the network connection the problem was solved. I tried it with iTunes - and it installed first time.
Don't know what would cause this problem, which as far as I can see affects only Apple software. Everything else seems to download and install over the wi-fi without glitches.
Best,
John

File not found error when tried to open Document ID settings page

Hi
when i open sitesettings>site collection administratin >Document
ID settings
it shows
file not found error
adil

Hi,
first we need to figure out the error. change the web.config so that you can see the error on browser
1) Obtain the complete call stack instead of the default error page:
<SafeMode MaxControls="200" CallStack="false"/>
to
<SChangeafeMode MaxControls="200" CallStack="true"/>
2) CustomeErrors mode value (in the system.web section) is set to Off:
<customErrors mode="On">
to
<customErrors mode="Off">
Change these value in "c:\inetpub\wssroot" CA dirctory web.config and
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\LAYOUTS\web.config .
now again try to do the action. you will get the error on screen.
Whenever you see a reply and if you think is helpful,Vote As Helpful! And whenever you see a reply being an answer to the question of the thread, click Mark As Answer

ESET NOD 32 cannot scan past this point. I keep getting stuck at 56% at the following; C:\Documents and Settings\Owner\Application Data\ Mozilla\Firefox\Crash Reports\Pending. Is this a problem with NOD32 or with Firefox? Thank you.

I ran into a glitch on my system that I tried to fix myself. My NOD32 was always showing the yellow warning circle as my protection status when I started my computer. I tried to fix this every way I new how.
Then I started to get pop ups asking me to fix and then send system error reports to Windows. Some stating they were '''''critical.''''' So I sent NOD32 the e-mail below.
'''Me:''' I cannot seem to run a complete system scan. I keep getting stuck at 56% at the following point. C:\Documents and Settings\Owner\Application Data\
Mozilla\Firefox\Crash Reports\Pending
I also keep getting messages to send error reports to Microsoft constantly. I also have this code C:\pagefile.sys-error opening
Thank you for your assistance.
'''Their solution:'''
Based on the information you provided, we recommend that you upgrade to latest version of ESET NOD32 Antivirus and see if this makes a difference.
Please click or copy/paste the following ESET Knowledgebase article into your web browser for step-by-step instructions:
'''Me''' : I did as they requested and am fully upgraded and licensed with their new edition.
Ran a new scan same problem.
I sent them a new e-mail but now wonder if it is a Firefox issue as, C:\Documents and Settings\Owner\Application Data\
''Mozilla\Firefox\Crash Reports\Pending'' this is where the scan stalls.
Any help would be appreciated.
Thank you.

Try delete the files in Pending folder and make the scan again, do not be afraid to delete the files see : https://support.mozilla.org/en-US/questions/679996
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

I have 2 iPhones (1 personal, 1 business) but use the same Apple ID. I have replaced my personal iPhone but it has restored to my work iPhone. How do I restore it to my personal iPhone settings?

I have 2 iPhones (1 personal, 1 business) but use the same Apple ID. I have replaced my personal iPhone but it has restored to my work iPhone settings (photos/contacts/messages etc.) How do I restore it to my personal iPhone settings?

You're welcome.
First check to be sure the new phone is running the same or higher version of iOS as the one you backed up (Settings>General>About>Version). If it isn't, you'll need to update the iOS first. Then go to Settings>General>Reset, tap Erase All Content and Settings, go through the setup screens on the phone and when given the options, choose Restore from iCloud backup and follow the prompts, choosing the backup of your personal phone to restore to.
Be sure the phone is connected to wifi and your charger while it is restoring the backup.

I had my iphone 4s synced to itunes on my work laptop. The IT group at work stripped out that installation and will not allow me to reinstall. My iphone insists it has to sync to my work laptop itunes. How do I change iphone settings to look at an itunes

I had my iphone 4s synced to itunes on my work laptop. The IT group at work stripped out that installation and will not allow me to reinstall. My iphone insists it has to sync to my work laptop itunes. How do I change iphone settings to look at an itunes installation on my personal laptop?

dcotejr wrote:
I had my iphone 4s synced to itunes on my work laptop. ... How do I change iphone settings to look at an itunes installation on my personal laptop?
You cannot.
By Design the iPhone can Only Sync to One iTunes Library at a time.

HT204053 in my iphone settings, my phone has not allowed me to change the apple id account i want to use for icloud

in my iphone settings, my phone has not allowed me to change the apple id account i want to use for icloud
im using another id for my purchases, which was the same one set for icloud, but i wasnt using icloud, now i made a new id, and want to set it for icloud, but its not offering me the chance to change it in icloud settings

Welcome to the Apple Community Rozie.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")

Error while checking in and storing: C:\Documents and Settings

Hi,
i have some problem in DMS , while doing Check in process after attaching documents in CV01n.
geeting error like "Error while checking in and storing: C:\Document and Settings.."
please suggest me how to solve this problem.
thx in advance...
Karthik.

Hi Karthik,
There may be several factors contributing to this error.Some of these maybe:
-Storage category defined improperly/missing
-HTTP/FTP destination missing
-Incomplete Workstation application definition
-Incomplete Authorization
Please run through/search for each of these issues (discussed several times in the forum) and adopt corrective action wherever necessary.
Regards,
Pradeepkumar Haragoldavar

Error while checking in and storing: C:\Documents and Settings\Administr

Dear
Whille saving then document in dms , i am getting this error.....
Error message is : "Error while checking in and storing: C:\Documents and Settings\Administrator\My Documen...."
Message Number is 26253
R Karthikeyan

Hi all,
Similar kind of issue occurred in one of our webdynpro applications of SAP NetWeaver Portal-
The error message "Error while checking in and storing" was returned by the BAPI while trying to replace documents in the DMS Server via portal.
But the documents were getting stored in the back end by the use of standard T-Codes.
Later it was found that ABAP tables COMPONENTS & COMPONENT_DATA are inconsistent by looking into the HTTP trace file.
The HTTP patch "http.c#21" was being used in our server.
SAP suggested the below mentioned steps-
-->Download the most recent SAPHTTP version & install it.
-->Then delete the RFC connections SAPHTTP & SAPHTTPA through T-Code SM59
-->Regenerate them again with report RSHTTP05
They were carried out in our ECC server & the issue was resolved.
Please try them out if applicable in your case & let us know.
Thanks & Regards,
Shreyashri Kar

Error while checking in and storing: C:\Documents and Settings\user\Desktop

Hi all,
I'm getting the following Error while checking in original to Content Server
"Error while checking in and storing: C:\Documents and Settings\user\Desktop" Message 26253
OAC0, OACT, CSADMIN settings seems to be Ok .
Settings in DMS SPRO - in dc10, dc20(data carrier used PC)- everything fine
-Authorization issues are not there
Earlier checking in was possible with same settings, but now we are getting this error.
From my end i had test the RFC Connection (SAPFTP, SAPFTPA, SAPHTTP, SAPHTTPA) through SM59 and its test run was successful. So the possibilty of RFC Failure was ruled out.
I knew this problem was arised as there is some issue in Content Repository, but not able to trace it out.
If any one knew what to do in this case, then let me know.
Secondly, what are the things need to be checked to identify the content repository Checking in Issue.
Regards,
S Anand

Error Resolved.
I had only executed the below command
./dbmcli on SDB>db_execute SET LOG AUTO OVERWRITE ON
OK
seems like Log file was full. but now its working.
Thanks for your suggestion.
Regards
S Anand

Writing video to dodgy "Document and Settings" folder

Minor problem that I've come across when generating video using JMF:
On Windows, if the output location is in the users home directory, the video gets written to a copy of that directory with spaces replaced by % characters!
e.g.
C:\Documents and Settings\me\Desktop\Documents%20and%20Settings\meMy%20Documents\My%20Videos
The target URL is selected from a file chooser and looks fine before it's passed to the MediaLocator.
What's going on?

StrideColossus wrote:
captfoss wrote:
URLs, by default, replace spaces with '%20'. Common knowledge, moving on.Really! Never come across that, and neither has anyone else on the team (or at least not for files anyway).Yep. [RFC 1738|http://www.ietf.org/rfc/rfc1738.txt] defines spaces as unsafe characters, and mandates that all unsafe characters be encoded using the % octet encoding scheme.
Anyway, no I'm not explicitly prefixing the protocol, instead just using file.toURI().toURL().
Dumping the URL shows that the protocol is correct, e.g. file:/C:/yadayada.avi on WindowsRather than doing that, because file.toURI().toURL() should result in replacing spaces with %20, I'd recommend trying the following...
MediaLocator ml = new MediaLocator("file:/"+file.getCanonicalPath());

I just got a new PC at work, and I saved all my files in my profile (Documents and Settings...).Being a new firefox install, I cannot recover my custom preferences (and passwords...)

At work, I was asked to exchange my PC for a new one (...) at a moment where I was completely stressed and hardly could find time to do things correctly ( I had big issues with some UNIX servers consuming all my time, and more...) I saved the content of my profile in (Documents and settings) from the XP pro OS. REinstalled Firefox, but cannot find a way to recover or use the content of Application Data\Mozilla\Firefox... How can I recover? (bookmarks, custom stuff passwors etc...)

Profile is a folder which store all your personal data in a safe place
* https://support.mozilla.com/en-US/kb/Profiles
* here explain how to backup profile https://support.mozilla.com/en-US/kb/Backing%20up%20your%20information
* here explain how to restore it
https://support.mozilla.com/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile

HT4623 I found an update ios6 in my iphone settings and then I tapped on install ,but it is going on and nothing is displaying .Only apple logo is displaying frequently.It has been happening for 13 hours.my question is how much time it will take to upd

Can anybody help in my concern below
I found an update ios6 in my iphone settings and then I tapped on install ,but it is going on and nothing is displaying .Only apple logo is displaying frequently.It has been happening for 13 hours.my question is how much time it will take to update ios

Read this: iOS 4: Updating your device to iOS 5 or later
... oh I think it is a 3gs or a 3
This makes a difference. What does it say in Settings > General > About?

I accidentally synced my iPhone with old iPod settings and I can't get my old iPhone settings back, what can I do

I attached my new iPhone to my iTunes account for the first time and it came up with an option to sync my old iPod touch settings with my new iPhone. Thinking this would mean that it would transfer all my music and pictures from my old iPod to my new I clicked it. So now my iPhone is all screwed up with no music, no contacts, and my old pictures. How do I get it back to my old settings? Or at least clear everything and start over with my iPhone settings.

The first time you connect a new iPhone to iTunes that is used for syncing with another iPhone or iOS device, you are prompted to transfer the backup for the other iPhone or iOS device to the new iPhone or set up the new iPhone as a new iPhone or don't transfer the backup for the other iOS device. This is designed to be done right away with a new iPhone - not many hours or days later after significant use.
All iTunes content on your iPod Touch should be in your iTunes library on your computer. Whatever you had selected for transferring music with your iPod Touch now applies with your iPhone. If you had/have Sync Music selected under the Music tab for your iPod Touch sync preferences with iTunes, the same music in your iTunes library selected to be transferred to your iPod Touch should have been transferred to your iPhone. This occurs after the backup is transferred. All content that was on your iPhone is now gone - replaced with the backup for your iPod Touch.
To start over as a new iPhone, you need to restore the iPhone with iTunes as a new iPhone or not from the backup. After the iOS is re-installed, select as a new iPhone for the restore option.

MMS Hidden columns appearing in Document Library Settings / Column list

Hello all,
Before you read this please be aware that I have found a resolution (that might be helpful to others) but I am wondering if anyone else has experienced the same thing and the cause.
Our scenario is as follows:
We use a Content Type hub
Most Content Types include one or more Managed metadata columns
The MMS Notes (hidden) columns (e.g. mms_column_name_0) have appeared on the 'Document Library Settings page under 'Columns' for 2 document libraries only. They appear under the actual name of the column (e.g. mms_column_name).
They are NOT visible to the user however (i.e. they are not selectable to be used in a view)
Looking at SharePoint Manager the mms Notes column's are marked as being Hidden = false. Altering this to true has the desired effect.
But has anyone else experienced the same issue as I'm inquisitive as to the cause.
The only thing I can think of that caused this to happen was us using 'Metadata navigation settings' (which allows you to configure navigation hierarchies) for the first time on one of the 2 Doc Libs effected . However, on testing it on other document
libraries the unhiding of columns has not occurred.
Can anyone shed any why this may have occurred?
Jason

Hi jasonl27,
this behaviour:
This is by design. Two separate lists do not have any type of relationship established to distinguish that the
columns are the same. For example, take an arbitrary column called "Position" being created on two different custom lists. Because the column Position is a custom column created
in the list, it has no mapping to other lists. The "Position"
in one list could refer to a title of a person
in one list, or a physical location on a different list. SharePoint cannot tell if these two items are the same or completely different. As a result, a new column name is added when we move the item.
perhaps you may try to do these steps:
$site = Get-SPSite -Identity "http://......../"
$web = $site.RootWeb
$field=$web.Fields["column name"]
$field.Update($true)
$field.Hidden= "True"
$web.Dispose()
$site.Dispose()
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Document iPhone Settings???

Similar Messages

Maybe you are looking for