Document is being distributed - changes are not possible
Dear Guru's
I have an issue when making a quotation transaction. After i saved the quotation transaction, i would like to change the window into edit mode.
So i have to click the display or change button and then after i click that button, there is an message text "<b>Document is being distributed - changes are not possible</b>" but after i wait for some minute, system still can not be change. and still appearing a message text "Document is being distributed - changes are not possible"
Please could u give some information about this issue?
The order in the CRM system remains in status 'to be distributed'
because it waits for an answer of the OLTP system that the order has
been successfully saved.
The reason could be due to the following:
1. Check in your system the delta download is active ? Did you perform
an initial download of SALESDOCUMENTS ?
If you check in transaction R3AC4 there must be an entry for
SALESDOCUMENT to enable a successfull delta download.
Without a successful initial download of this object, no delta
download will be performed. Please refer to the SETUP AND
DOWNLOAD guide you will find in the service market place
http://service.sap.com
2. Check if there are any ABAP Dumps related in OLTP ? If yes, status
will always be in distributed as CRM is still waiting for a reply
from OLTP.
3. Check your inbound/outbound queues are working.
The note 490932 will help you to check your dataexchange
customizing.
Please, reward points if it helps you.
Regards, José Ignacio
Similar Messages
-
Error when trying to Edit Servcie Contract :"Document is being distributed"
Hi,
I am trying to edit Service Contract from WEB UI. But, when ever I say edit, it is giving error saying
"Document is being distributed. Changes are not possible".
Can you please let me know, why such error comes..and how to rectify that.
Thanks,
SandeepHi PP,
I have checked SMWO1. There is one BDOC with yello light. But No errors in that BDOC.
I checked SMQ1 and SMQ2. But, no ques found for that Order.
Can you please let me know....what else I can do.
And this Order is created one week back. Now I am trying to edit. But, still the error is coming.
Please help me in this.
Thanks,
Sandeep -
Payroll area change is not possible
Hi,
When we are doing promotion action, i.e, one paryoll area to another paryoll area, In actions whatever the date we are giving is taking, but when come to org assignment it is not allowing to save with that date and throwing error " payroll area change is not possible at the end of payroll period"
For example: In Actions start date is 04.01.2010, in org assign is not allowing to save the entry with that date, but if we give 01.01.2010, it is allowing to save the record. As paryroll period is starting of the month to end of the month, that is the reason it allowing the start date of the month in org assign, but user wants the record from his desired date..
Please help me on the issue.
Thanks & Regards
KumarHi Kumar,
Mid-payroll payroll area change is allowed for only a few countries including:
Canada (country grouping 07), the United States (10), South Africa (16), Mexico (32), Taiwan (42), Finland (44), and Spain (04)
Please check the notes below for further reference:
1104733
849363
744563
Regards,
Dilek -
I've been editing images with ease for a long time but now the changes are not being saved.
I've been editing images with ease for a long time but now the changes are not being saved.
Also, it is not liking me adding a large ammount of images in one go?Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Basic things like :
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted?
- Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have. -
HT4075 I tried the steps mentioned above but the changes are not being saved.
I am not able to edit or merge PDF files. I followed the steps mentioned in the Mac support community but the changes are not being saved. Any solution to this?
The link you posted gives be a 404 not found message.
The reason you're getting the repeat is because your site name is wilgenroos.nl and the first page of your site is wilgenroos.
The standard URL for domain names that are forwarded with the CNAME method is:
http://www.domain_name.com/site_name/page_name.html.
You can change the site and page names in iWeb to give you something more informative about the site and page.
If you're publishing to a 3rd party server and want to get rid of the site name in the url and only have
http://www.domian_name.com/page_name.html
do the following:
publish the site to a folder on your hard drive (already done)
use Cyberduck to upload just the contents of your site folder to the root folder of your account on the server.
You should delete the old site folder and files that are currently there beforehand. -
When I try to sync changes from my playlist on the computer to my iphone the sync process gets as far as step 7, applying changes, then freezes up and the changes are not getting to my iphnoe. How do I fix this issue?
Are all these songs associated with the same Apple ID or were some purchased on another account?
Are they tagged properly? In the library does it break an album out into several different albums with a few tracks each?
Check your sync settings for each device. Do you accidentally have only certain songs/albums syncing? -
Indent changing is possible but changes are not reflecting after refresh
Hello all,
I am facing one issue with alignment in the BEX. i need to changed the the result rows. initally the indent is 2 , am changing it to 1 and saving as existing report. after refreshing the workbook. the changes are not reflecting. can anybody provide me some inputs on these. any help is appreciated.Hi Priya,
You need to Implement the following SNOTE's for these changes.
Union Budget 2015: As per Finance Bill 2015, the Government has implemented amendments to existing sections and introduced new sections in the Income Tax Act. Changes have been made in the following topics:
Tax Surcharge Rate
Increase in Conveyance Allowance
Section 80
Sukanya Samriddhi Scheme: The Government has launched this new deposit scheme for the minor girl child. This is a savings scheme that can be opened by the natural (biological) or legal guardian of a girl child aged below 10 years. Related Notes:
2139208 - Union Budget Changes – 2015
2138605 - Sec80C: Sukanya Samriddhi Scheme
Upcoming Developments:
PF Admin Charges Revision
Professional Tax for Mizoram & Nagaland states
Average Rate of Tax
Regards,
Venkat Polisetty -
Hello All,
We have a scenario in CRM & R/3 where when a "Complaints" document is created in CRM a corresponding order is created in R/3. We have done the required configuration.
The generated Bdoc is successful and shows a green light, however the queue seems to be stuck somewhere, which is why the message "Document is being distributed" is being displayed, if any further change is tried on this doc. We have checked the queues, the Bdoc statuses, tried resending the Bdocs (no error logs are generated), also we have tried implementing the note 718065 ( as specified in the related threads on SDN)...but still do not have any positive results.
We are still not able to see a corresponding Idoc on the R/3 side.
Can someone help us with this.
Rgds
PriyankaHi,
when a Sales_Document Bdoc (which is used for Complaints as well) is send from CRM to R/3 there are no IDoc in R/3 created.
Did you ever perform a (dummy) download of Sales Documents Bdoc (SALESDOCUMENT) from R/3 to CRM? If not, please do so.
This is to enable the Delta-Download from R/§ to CRM. When uploading a Complaint from CRM to R/3 the Bdoc is waiting in CRM to receive a success message. Until than the complaints remains in status "being distributed". But the success message is only send from R/3 to CRM when the Delta-Load from R/3 to CRM is active.
Regards,
Jörn -
Document Contains Errors. Approval is not Possible.
I have a SC approval that errored out when coming back to SRM. We run RBBP_OFFLINE_EVAL program periodically throughout the day to pick up offline approvals from users. In the spool list, I see this message:
Document Contains Errors. Approval is not Possible. And the system gives me the WI ID, SC # and the object type BUS2121.
I've never seen such an error before. The document here...is it referring to the approval email itself? We instruct our users to not edit the approval email in any way. They just have to click on the approval link and click on Send in Outlook. I don't know if the document it's referring to is the SC or the approval email.
Can anyone help?
SNHi,
You are right. This error is the issue. To answer your other question why this message was not raised earlier;the problem could be that at the time of sc creation, there might be sufficient budget. But because your shopping cart was in approval for some time, it is possible that some more shopping carts have been raised with the same WBS and got approved. This would reduce the overall budget available. When the shopping cart is approved, one more check is done by the system and this time there was no sufficient budget.Hence the error is displayed. Only option for you now would be to ask FI people to increase budget or resubmit the cart by changing the value of the shopping cart.
Regards,
Sanjeev -
Have used Aperture for some time - at some point this stopped working - not sure when
workflow:
click photo and elect to use the external editor (Photoshop Elements 9)
Copy of the photo is created in Aperture with the "O" badge and I am rolled out to Photoshop
Have to change the type to 8-bit in Photoshop to start making changes
When done and I exit I am prompted to save the photo
On returning to Aperture however the "O" badged photo does not get updated/reflect my changes
Other Things:
I can find a changed photo sitting in the Aperture Library using finder or Photoshop itself - so I know changes have been made a new file saved (TIFF).
I am wondering if I am missing some (new) preference such that the changes are not proerly being saved for re-display/storage in the Aperture Library
I am running Lion OSX at the moment but the behaviour was the same under Snow Lepoard versions.
Current version of Aperture is 3.1.3, Elements is 9.0
Any help/suggestions greatfully receivedTry using psd. Some rerports indicate some confustion between the apps with TIFF. See:
https://discussions.apple.com/message/15921933#15921933
I cannot confirm, nor test, since I use PS CS5, and not Elements.
Ernie -
Changes are not reflecting in the discoverer workbook
Hi ,
I have a report created with user Disco(Disco.Report_name).Now I need to add a column to it and i have done that with other user Discodev but when I save it the changes are not reflected on Disco(Disco.Report_name) rather it is being saved with user Discodev(*Discodev.Report_name*) .
The User wants that the changes should be reflected on Disco.Report_name (I can't use the credentials of Disco to do this as it is also a user) .
Appreciate your help !!
Discoverer Version 4i
Thanks ,
VijayHi West,
Thanks for the reply.
I want to get clarified one thing, Is there any option where DISCO user can give Privileges to DISCODEV to make the changes,as the DISCO user is not a common user I have a problem in making the changes.
Thanks,
Vijay -
Changes are not Reflecting in WAD
Dear Gurus,
I got a problem in WAD. Changes are not Reflecting in My WAD. When i created NewQuery in WAD by just placing Chart & Saved it. After executing Chart is displaced.Again I updated the same query by placing table and saved it. After Executing Table is not displayed only previously saved Chart is displayed. Could any one Kindly solve my Problem.
Thanks,
SonyHi Sony,
SAP BI has HTTP Cache and the web templates are stored in the HTTP cache of the server. So, when you change a template and execute it again - the previous version which is stored in the HTTP cache is being retreived.
To correct this, go to TCODE SMICM in the menu bar >> Goto >> HTTP Server Cache >> Invalidate -> Global in system
Once this is done, ask basis to restart the java engine.
I hope this helps you.!
-Pradnya
Edited by: Pradnya Rane on Sep 29, 2009 8:05 AM -
UI Shell : Changes are not saved. If you leave this page
Hi,
My JDeveloper version is 11.1.1.6.0
I have on VO having all transient attributes. The vo having dependent LOV's . When i am not not selecting the value from lov and trying to close the UI Shlll it is not showing warning message.
When i am changing the lov then trying to close the UI shelll then it is shows the "Changes are not saved..." warning message. I want to skip the warning message . How to do that
Thanks
Deepakgo to <af:document id="d1" > tag and then property inspector and the n make uncommittedDataWarning to off.
Thanks
Pratee. -
Web template changes are not saved.
Hello Experts,
I making a small change to an existing Web Template namely changing the tab page 1 to tab page 2 and vice versa.
I could see the message Changes are saved but at the end web template is same like as it was.
Any idea why changes are not being saved and how to over come this will be of great help.
Thanks in anticipation.
Best Regards.Hi.
The changes are not saved in WAD or has not affect when executing the WAD ?
Regards. -
FBRA-Document includes already cleared items - reversal not possible
While reset and reversal using FBRA I am getting the following error. Please do let me know if any clue to resolve this issue.
Document includes already cleared items - reversal not possible
Message no. F5 308
Diagnosis
A reverse posting clears all line items that are managed as open items. This is not possible if one of the items in question has already been cleared by another method.
System Response
Error message.
Procedure
If you really want to reverse the document with the number you specified, display the cleared items and reset all those items for which you can find clearing document numbers. Then repeat the reverse transaction.Hi Dewang,
Thanks for your quick responce.
step 01- Posted Customer Invoice on 01-Jan-2011with RV doc with Rs-1200: Doc 111111
Step 02- Posted Customer downpayment on 01-Jan-2011 with DZ doc with Rs-1200: Doc No 2222222
Step 03- Clear Customer line items on 10-Jan-2011 with AB doc with Doc no- 3333333
Trying to reverse Cleared Item (i.e. Doc No 3333333) with T-Code FBRA. While doing Reset and reversal we are getting the above problem.
Please let me know if you need any information.
Regards
Raj
Maybe you are looking for
-
I have had creative suite premium installed on my computer for a long time, but now it states that my computers configuration has changed and needs to be reactivated, but it cannot be activated by internet, and the phone number states that adobe no l
-
Mangled file downloads over http problem in 10g
I have a web app running in an OC4J stand alone 10.1.3.3 and am having a problem with downloading files over http. Its a struts2 app whose file downloading impl is easy to use and standard code for writing to an http servlet response output stream. U
-
Sales order item details with condition types
Hi Guys, I am uploading the sales order details using DIRECT INPUT method in LSMW, one line item having 5 condition types, but in the item level structure BVBAKPOM, I can able to MAP only four condition types. Is there any way to map more then 4 con
-
Satellite A110 - can't connect/ confree errors
Hi there, I'm suddenly having problems connecting to the internet, both by wireless and cable, and on any network. The icon shows limited/no connectivity, and when I try to diagnose problems, it says it can't renew my IP address. When I start up the
-
Inaccurate write to file timestamps
Hi all, I wanted to become familiar with writing data and associated timestamps to a file to verify the rate at which samples are being read into my system. As a little test I wrote up a simple VI that iterates 5 times and creates 5 sinusoidal sample