DOCUMENT PRINTOUT WITH SCAN

Requirement:
We are looking a printer whic has dual parallel features, Printout with scan the same document in a single process
In other words, if I send a print a document on the printer, it should make printout as well as scan the same document in parallel process.
Is there any model with the above mentioned  features, if yes, please mention the model number
Thanks

Sorry I believe each one is a separate process.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Similar Messages

  • Problem with scanning document in PDF format to computer

    has anyone had a problem with scanning to the computer a document in pdf format from hp Photosmart 7525  e-All-in-One series wireless printer? The document appears in My Documents but when I try and open the document I get an error message that says the document cannot be opened. I can scan and open the document in TIF format. I am running Windows 7 Home Premium and I just installed the Photosmart 7525 printer. I've uninstalled and reinstalled the printer using the CD download.
    This question was solved.
    View Solution.

    Hi,
    Can you open other pdf files ? Do you have Adobe Reader in your computer ? Please download and install it on your machine then try to open file(s) again:
       http://get.adobe.com/reader/
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • FInd Feature with scanned documents

    Hope someone can help. I have some documents that I am trying to scan so I can find specific numbers on the documents. I am scanning using a CanoSacan Lide 100 and it is capable of scanning in OCR and PDF files. Once the documents are scanned and I open up Adobe reader, the find feature cannot find the numerical text I am trying to locate. I have read that the find feature does not work on scanned images so how can I get this to work? Funny thing, when I scanned my test document, saved it and used the find feature the first time it worked - now I am having no luck.
    Also, I came across a document referring to Adobe Acrobat 5 and picture capture. Does Adode reader have this feature - can't seem to find it.
    Thanks for any help you give me.

    Hi
    Finally figured it out...I am doing my happy dance as I type. The problem appears to be that the document must be scanned as a TEXT OCR file FIRST then converted to a PDF file. The scanner cannot do both actions at the same time. So I scanned the document as a TEXT OCR file type and then went to the scanner menu and selected save as PDF. Once that is done, I switched to Adobe Reader and opened my file. Word of caution, if the text is too crooked, the FIND feature will not work accurately.
    Hope this helps someone else who is trying to use scanned items and the FIND feature.
    Thanks for trying to help.

  • Unable to scan and communicat​e with scan function C6180 Vista Home Premium 64 bit Printing works

    I have an all in one C6180 Photosmart connected by wireless network (infrastructure). Network consists of 2-laptops, 1-Desktop and the printer.  Everything works from HP solution Center on the Compaq laptop and the Dell desktop both running Windows XP. My newest laptop is a Dell studio XPS core2   2.4ghz running Windows Vista Home Premium 64 bit. I am unable to scan from the Dell Laptop using HP Solution Center nor can I scan from the printer buttons to the laptop. Solution Center opens I select "scan document" and immediately get an error message "unable to communicate with scanning device. Likewise with the copy function.  The laptop does recognize the printer though and I am able to print wirelessly.  All functions work when connected via USB so I believe the printer is fine.  I have been working with this problem since I bought the printer in 2007. I spent many hours reading hundreds of internet posts, talking by phone with HP and via e-mail support from HP.  I became frustrated and gave up for awhile but now I want to see if there are any new solutions that I don't know about. I downloaded full feature software and drivers for the 6180 from HP and performed various levels of uninstall (L1, L2, L3, L4). I also cleaned the registry with ccleaner, windows disk cleanup and manual registry deletions when allowed per HP. I have checked port settings, tried stopping HP functions is Services.Msc. The Digital monitor is currently running, however no scanner communication-computer to 6180 and no scanner communication 6180 to computer. I can print and fax from computer wirelessly. I have ran the HP diagnostic utility separately and it appears everything is fine, connection IPaddress etc. During install when prompted to run test it says the printer is connected to the network. I have tried to add a device to the network after install and get the message no wireless devices found. The scanner does not appear under Cameras and Scanners in control panel. Nor will it find the scanner when I try to add device. Firewalls and antivirus have been turned off. Still can't make it work. Suggestions please.

    Sorry about your pain.  L3 uninstall is what I recommend.  Re-install from hp.com and this time, with the printer properly attached it should flow OK.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Problem with Scanning to my Apple Mac

    Can someone help me please.  I have been scanning various documents merrily for more than a year.  Yesterday I scanned 10 different documents to the HP Photosmart Studio.  From there I moved the scanned items to a file on my desktop.
    Suddenly today, the scanner doesn't work. 
    In the HP Device Manager, after clicking onto "Scan Picture" the document is pre-scanned, and when I adjust the area to be scanned, and click "ACCEPT" I receive the following message:  "UNABLE TO ALLOCATE MEMORY OR SYSTEM RESOURCE TO COMPLETE OPERATION".
    Well - -  I un-installed the whole programme, disconnected the printer, and re-installed - but the problem is still there.
    Can someone please advise me as to what to do.

    Dear bis745,
    I did thank you before.  But I have had a thought:
    I wonder if the whole problem is because of a very recent upgrade of iTunes.  I can't see the connection really, but for the past few days I have had endless (unresolved) problems as well with my iPad - since the new iTunes version was installed.  Perhasp it is all connected??
    Ruth

  • Material document printout

    Hi,
    I am using out put type WE01 for a material document printout but this is too much descriptive.
    Is there any way I can make it less descriptive such that I can only see
    material document number,
    document date,
    PO reference,
    Vendor number,
    name,material number,
    material description,
    and quantity.
    Is there any formavailable for this.
    Please suggest
    Regards,
    manOO

    Hi,
    The form display (descriptive, non descriptive) does not have anything to do with output type. It depends on the script or smartform that has been assigned to the output type.
    You would get the same output even if you use the different output type provided you use the same script or smartform.
    Hence, you would need a script or smartform which is less descriptive.
    One way is to copy the standard form and modify (remove unwanted data) as per your requirement.
    To view which script or smartform is assigned to the output go to Transaction NACE -> Choose ME Application -> Click on Output Types push button on your application toolbar -> Choose WE01 and click on Processing Routines option on the left pane of your screen -> You will be displayed with form details.
    Hope this will help.
    Regards,
    Naveen.

  • Material document printout issue 541

    Iam trying to take printout of the material document which has been posted with 541 movement type.
    1. new output type copied from wa01 and created as DEMO
    2. created access sequence with condition table 503(only plant is there in that table)
    3. assigned access sequence to DEMO
    4. maintained condition records also
    5. In MB02 i have assigned that DEMO output type to that material document
    Even though i am getting the message
    No messages for repeat processing exist
    Message no. VN109
    Pls suggest

    Hi,
    Check the output conditions has maintained properly  in MN21 transaction.
    1     Material Document Printout               1     3          EN
    If its OK,
    Then check in MB90 transaction for
    Processing mode                 1
    reg.
    Mariappan
    Edited by: rs_mariappan on Feb 20, 2012 12:45 PM

  • Which c-series modules are compatible with Scan Mode?

    OK, so I just wasted 4 hours.
    I started a new Project with a need to use a 9220 analogue input card on a cRIO 9030, but immediately became stuck when I was unable to add the module using the right click Add New C-Series Module wizard to the 9030 chassis.
    My first (and only) assumption was that this was a new card and I needed the latest Device Drivers. So I installed those.
    When that failed I upgraded my LV2014 to LV2014 SP1, and also upgraded the Real-Time and FPGA modules too.
    4 hours later, when that failed, I realised that maybe this isn't a card compatible with Scan Mode so began searching ni.com for information. I've searched a whole raft of terms and I just cannot find information on which modules are supported by Scan Mode (which is presumably nearly all of them). I know it exists somewhere because I one referred to it when I had an RS485 module that was only compatible in FPGA mode, about four years ago.
    So:
    1. Is there an easy way to determine if a C-Series module is compatible with Scan Mode? I still don't know!
    2. Can we please have Scan Mode compatibility shown in the Add C-Seris Module Wizard. When attempting to add a module to a cRIO chassis, the wizard can hint to us that a particular module is not compatible. By not showing the 9220 in the drop down list I was led to believe the module was not a known device (and hence I attempted to upgrade my drivers). It would be better if the module was listed but disabled and not selectable, with some informational text to explain why. It's a fair assumption that a module will be compatible, so we don't expect it to not be listed when we attempt to add it. In fact, the possibility that some modules aren't compatible can evade your consciousness temporarily and make you do stupid things (like upgrade your installation!).
    3. Can we please have Scan Mode compatability information put on each module's description page. That would have made this whole process much quicker.
    Thoric (CLA, CLED, CTD and LabVIEW Champion)

    Well, I definitely agree that finding info about RSI module support is not as easy as it should be. Since I know where to look, I will refer you to this document, which I found linked from this page.
    That's the best document I know of on the topic.
    Cheers!
    TJ G

  • Can someone help me with scanned items?

    can someon assist me with scanned documents?

    Select the folder whilst holding down the control key - there will be a pop-up menu with an item "Compress "Test Folder"" (the name of your folder). This will create a zip file which you can attach to an outgoing email, leaving the user on the other end, the recipient of your mail, a zipped, compressed file which he/she can unzip and have access to your scans.
    Clinton

  • Adobe Reader XI Pro does not recognize Samsung Multifunction Xpress M2875FD. I can not edit the PDF documents that I scan it. What do I do?

    Adobe Reader XI Pro does not recognize Samsung Multifunction Xpress M2875FD. I can not edit the PDF documents that I scan it. What do I do?

    We need to find out what you actually have here. There is no Adobe Reader Pro. There is Adobe Reader and Adobe Acrobat Pro.
    With Acrobat Pro, you may be able to do some editing after running OCR. With Adobe Reader, you cannot edit.
    Which one do you have?

  • OfficeJet 6700 - feeder not working with scan to e-mail

    I'm having a problem with scanning to e-mail.
    I put the document in the feeder and use the app to scan to e-mail, but nothing happens.
    It just says "scanning failed, try again or exit"
    I have also tried to put it on the glass, but again nothing.
    I can scan from my computer - here the feeder works...

    HI now_what,
    Welcome to the HP Support Forums.  I gather that you are unable to use the scan to email feature of your Officejet 6700 printer.
    To better assist you, would you please provide some further information:
    What make/model/product number of HP printer do you have? How Do I Find My Model Number or Product Number?
    How is the printer connected (USB cable, ethernet, or wireless)?
    What operating system are you using on your computer? whatsmyos.com
    If you are using a Windows-based operating system have you Tried the HP Print and Scan Doctor for Windows? If yes, what were the results?
    Are you able to make a copy from the front panel of your printer?
    Is the printer plugged directly into a wall outlet?
    Do you have any other error messages?  If yes, what does the error message say and where is it displayed (printer or computer)?
    Thank you.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • Why is the documents I am scanning and converting to word documents not the same?

    I have scanned documents to my computer and when they come up in my Adobe suite, they are spelled wrong. I have 50 pagets of document with hundreds of errors. The original documents are correct. what is my problem?

    Reader doesn't have anything to do with scanning. But really, I have read your question a few times and I still can't figure out what the problem is. If you can give more detail about what you are using and what is happening, maybe we can send you in the right direction.

  • Pages 5.5.1: When opening a document created with Pages '09 (Version 4.0) with Pages 5.5.1 the page header and the page footer are deleted. How can this be prevented? Or is this a bug in Pages 5.5.1?

    Pages 5.5.1: When opening a document created with Pages '09 (Version 4.0) with Pages 5.5.1 the page header and the page footer are deleted. How can this be prevented? Or is this a bug in Pages 5.5.1?

    Same problem here (no graphics in header or footer) and the problem has been reported months ago. It is another bug/feature lost when Apple moves from 09 to the iCloud-compatible versions.  Complain to Apple, you may have better chance than me and they may finally listen to their users....

  • Users are unable to synchronize document libraries with OneDrive for Business

    Hello,
    We are having an issue with our users attempting to synchronize document libraries with OneDrive for Business. When a user tried to synchronize the document library either via the "SYNC" button on the document library page using IE or by
    manually entering the document libraries path into the OneDrive for Business desktop app they receive the following error
    "We can't connect to the specified SharePoint site". The users have the Edit permission to both the site and the document library. I have performed the following actions in attempt to get the synchronization to work.
    1. Tested giving user the owner permission to the site and document library. same result.
    2. Performed a repair on the users Office 2013 installation.
    An interesting point to note is that I myself am able to synchronize the document libraries using both the "SYNC" button on the document library site and by entering the path manually in the desktop app. Difference between my account and the test
    accounts is that I'm a site collection administrator and farm administrator. Can anyone shed some light onto this issue?

    Hi Corey,
    According to your description, my understanding is that the users cannot sync document libraries with OneDrive for Business.
    I recommend to check the Permission Level to see if the Use Client Integration Features permission is selected.
    If not, check this permission in the corresponding permission level which is granted to the users.
    Please also check if the users have the right permission to sync the document library with OneDrive for Business.
    More reference:
    http://nheylen.wordpress.com/2014/05/15/sync-error-we-cant-connect-to-the-specified-sharepoint-site/
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • Problem with scanning - printer display shows "Server connection error"

    My printer has been working great and I have had no problems with scanning.  But two days ago, all of a succen I rec'd message "server connection error".  I tried to send to email as well as computer.  Got the same message.  As usual, I don't recall any action on my part that could have caused this problem.    The copying and printing functions work fine. Detailed advice to someone technically challenged will be much appreciated.  Thank you.

    Ran
    into a problem with connecting to the DB on the SQL server from the IPAM server.  The Dba and I checked the target SQL instance was enabled TCP and listening on a valid TCP port.  SQL server was set to use port 1443 for incoming connections. 
    IPAM was set by default to use 1433. 
    Also used
    netstat-n to identify issue and verified 1443 on SQL server was
    being used.  Made the correction under the IPAM provisioning wizard and connected to the database.  Fixed. 
    Important note I was able to connect to the database with a .udlfile
    without any issues
    Also note that 2012 R2 IPAM only supports 2012 SQL Enterprise.  Why?

Maybe you are looking for