Document size changes when creating pdf from jpeg

When I create a pdf from a jpeg file, the document size increases considerably. The native jpeg was saved in the "save to web" feature in Photoshop. I cannot find settings in ImageReady or Acrobat to make my document the correct size. Any suggestions?

Why not save the PDF from Photoshop directly? This gives full control
over compression settings. It will not, however, downsample so you
should do that first.
Aandi Inston

Similar Messages

  • Page size error when creating PDF from Excel 2013

    Hello,
    I am using Acrobat Pro XI, and am creating a PDF from Excel 2013.  I have updated Acrobat to the latest version (11.0.4).  I am using the Acrobat CreatePDF add-in inside Excel to convert a spreadsheet to PDF.  However, when I create the PDF, the page size doubles from 8.5" x 11" to 17" x 22".  I have checked the print settings inside Excel to insure that the content fits onto an 8.5" x 11" page.  I also checked the Preferences->Advanced Preferences of the Create PDF add-in and confirmed that the default page size is set to 8.5" x 11".  Does anyone know why it is creating the PDF with a 17" x 22" page size?  Also, can the page be resized back down to 8.5" x 11" within Acrobat Pro XI? 

    Hello - this did not happen when I printed the file to the Adobe PDF printer.  It correctly sized the sheet as 8.5" x 11".  Thanks for the suggestion.  Also, it will properly print out to the physical printer. 
    The main problem is when I am combining several PDFs into one document, I have some sheets sized at 8.5" x 11" and some at 17" x 22", so the document looks strange when viewing it online.  I am still not sure why the Create PDF add-in creates a different sized PDF than the Print to PDF function. 

  • Document layout changes when creating PDF

    We have the problem of the layout/formatting of documents changing whenever we try to print to PDF from, for instance MS-Word.
    We open a large document of lets say 100 pages in total, then when we choose PRINT and now select ADOBE PDF instead of the default Windows printer, then the document layout/formatting changes and now suddenly htere are only 95 pages.
    It is aboviusly some font setting problem, but we have not been able to find a soultion ourselves. This issue also prevents us from using "create from multiple files" as we cannot trust the final layout (page numberring end up wrong in PDF file)
    Any input will be appreaciated.

    Thx for the input. I am aware of the suggested workaround, but I was looking for at more "permanent" solution, as we need to combine 40-50 files for each job (Word, Excel...and more) and therefore we are trying to avoid having to go through all documents each time we need to convert to PDF.
    Currently we are :
    opening each document individually
    then selecting ADOBE PDF printer
    then checking document formatting/layout
    then printing to PDF.
    finally combining the 40-50 PDF's to one PDF
    This we have to do as we cannot trust the formatting/layout.
    It is off course undesirable when we know we can combine Word, Excel files to one PDF in one "go" without having to open the individual docs. at first.
    Surely, it must be some printer driver setup issue (using printer fonts, enabling/disabling bitmap fonts, use truetypes....etc)? we just can't find the recipe for this ourselves.

  • Pagination changes when creating PDF from FM file

    Using Structured FM 7.2p158, Adobe Acrobat Professional 8.1.3. I have updated a chapter with a graphic and want to send a specific page to a colleague. Tried to print the individual page to a file, then distill that print file to a PDF file; Distiller flushed it, whether I used the Acrobat PDF printer or my regular printer.
    Next tried printing the entire chapter, which works, but the PDF pagination is changed from the original FM file. Tried setting to "Standard" and "High Quality Print" but still get the same result.
    Any suggestions, please?
    Thanks,
    Cheryl

    Cheryl Dwyer wrote:
    Tried to print the individual page to a file, then distill that print file to a PDF file; Distiller flushed it, whether I used the Acrobat PDF printer or my regular printer.
    Cheryl,
    You should only be using the AdobePDF printer instance when working on FM files. If you changed to a different printer and created output using that to send to Distiller, then there can be a number of issues, especially if you've somehow used the printer fonts (you may have substituion enabled in the printer driver giving you different metrics). The SetPrint utility from Sundorne <http://www.sundorne.com/FrameMaker/Freeware/setPrint.htm> will ensure that your default printer in FM is always the AdobePDF. Note: you can still manually switch in FM if you need to directly output hardcopy to your system printer.
    If Distiller "flushed" your output, then there should have been a log file generated that specifies what the error was. This might help provide some solution to your original problem.
    The joboptions settings in Distiller wouldn't be creating the reflows that you're seeing. It's probably one of the fonts, printer instance, graphic size (dimension/scale) that caused your problem.

  • When creating PDFs from WORD 2010 I cannot get the TOC heading entries as hyperlinks

    When creating PDFs from WORD 2010 I cannot get the TOC heading entries as hyperlinks. I used to be able to do this in WORD 2003. I tried to create a PDF from Acrobat by selecting File > Create PDF >navigate to the WORD file > select three checkboxes >
    Any help with getting the TOC heading entries as hyperlinks?

    Try to do it from Word using the ribbon.

  • Acrobat 9 Quits When Create PDF from Scanner Selected

    Hi. I wonder if anyone can advise please.
    I have recently installed Acrobat 9 on my MacBook Pro and have plenty of RAM. However, I can "Create PDF from Scanner" just the once. After that, Acrobat quits when I select Scan or quits if I cancel the scan.
    I have tried the following:
    1. Troubleshoot System Errors & Freezes
    2. New User account
    3. Recreated Preferences
    4. Booted from separate disk
    5. Repaired disk permissions
    6. Have no third party plug-ins installed
    7. Have run Repair Acrobat
    8. Changed Universal Access
    9. Defragmented disk & repaired files
    10. Safe Boot and reinstall Acrobat
    Nothing has worked except when I clean install I can scan through Acrobat once.
    I can scan from the scanner software - Lexmark 4850 - with a jpeg straight to Acrobat but want to try to solve the issue of scanning straight from the app.
    Thanks for your help people.
    Regards
    Paul

    After I discovered my problem of quitting after completing the scan of the first side of a 2-sided document and decided to go to Adobe for help, I should have known I was in real trouble after following their instructions for locating the Acrobat serial number. After bringing up the splash screen and clicking on it, instead of seeing the number the splash screen disappeared! So I had no option but to use the phone. Then their help person couldn't give me the serial number- he had to transfer me- and I chose to stay with him for help instead. He decided it was a conflict between the Acrobat & HP software and ended the help session.
    I then did some on-line research and discovered others with the same problem, and came up with the comparison test with the Windows version. Adobe's phone system didn't recognize my Case #, but the second Help person said it worked fine. At that point, I got the feeling that I was in real trouble. After another hour going over the same ground and repeated denials that their software was at fault, the Helper refused my request that they do a Windows comparison test or send me a Windows version to test myself and promised to call me back with results of their "research". That call never came.
    On the third call, again with the Case # unrecognized by the phone system, the Helper was even more unhelpful, probably after reading the record of the first two calls. He insisted on going back to the machine and over the same ground once again, and I ended the call.
    I agree that the on line approach is better, and I may have to make a double call to get the serial number (neither of the two I have, each different on the case or on the CD worked) and try that if my request for a supervisor fails. Fortunately they are so incompetent that they can't track starting over.
    I'm not a programmer, but have lots of varying experience with computers dating back to the first Atari-400. Since your Acrobat uses only the Twain driver component from your scanner software, the first place to look for a problem is in the Acrobat software, especially since the software doesn't run again after the first use without reinstalling, and the scanner continues to perform properly using it's installed software. The Windows comparison test such as Tim Whitfield was able to make, would clearly establish the Mac version of the Acrobat software to be at fault, but would still not resolve our problems. Unfortunately I hold out little hope for either you or I with Adobe, since neither their phone nor the online help has come up with a prior fix. This indicates a bug fix requirement, which for something like this looks to be a relatively long time in coming.

  • TOC not updating when creating PDF from Robo9

    I have not really created PDFs from Robo before, so I might be missing something basic. I am trying to create Word and PDF documents from my Robo9 project. My problem is that some of my topics are not being generated, in either the Word output or the PDF output. The topics are indeed part of the TOC in the Robo project, but they are not part of the TOC in the Word and PDF output. The strange thing is, all of the TOC books make the conversion, but the one book I am having the issue with includes one topic, but all of the other topics in that book do not get converted. I tried recreating the TOC, and it still does the same thing. It's almost like the printed documentation generation is ignoring any new changes to the TOC, as it's the same every time no matter what I change. I tried making some changes to topics that are generated, and I can indeed see the changes in the printed output docs.
    Anything glaring I am missing, or should try? Thanks.
    Mark

    Likely a common misunderstanding.
    The first time you create printed documentation, the topics are based on the TOC. Thereafter there is no link.
    When you add new topics to the project, they are not automatically in any of the TOCs. You have to add them to each TOC. It's the same with print, you have to add them in the print layout.
    Easiest way is to simply use the double left chevrons to remove the topics in the print layout and then use the double right chevron to back in, the difference being it will add all the topics in the TOC and as you added the new topics there, they will be in the print layout.
    There's more in Printed Documentation on my site.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Problems creating PDF from JPEGs.

    I am using Acrobat Standard 6.0.5. I am having trouble creating a PDF from certain JPEGs. I created these JPEGs using a scanner and Photoshop Elements 5, saving them as 8-bit grayscale at 300dpi. When I create a PDF from these JPEGs in Acrobat, I get a blank, 1 inch x 1 inch image. I've tried zooming in and out and the image is still blank. The funny thing is that I can extract the JPEGs from the newly created PDF, so they are somehow present; I just can't see them.
    Some other data points:
    1. I can create a PDF from JPEGs from my digital camera. These are 180 dpi, 24-bit color, but otherwise I don't see any notable differences.
    2. I've tried converting the problematic JPEGs to 24-bit color. That made no difference.
    3. I've tried converting the problematic JPEGs to JPEG2000. That *did* make a difference -- I can create a PDF from them just fine.
    4. I can open the problematic JPEGs in Photoshop Elements and *print* them to PDF. That works just fine.
    There's obviously something about these files that Acrobat doesn't like, or else some configuration setting in Acrobat that needs to be adjusted, but I can't figure out what it is.
    Thanks in advance!

    JPegs are often problems. You might try saving to TIFF instead, the standard for scanners.

  • Acrobat 8.1 Crashing when creating PDF from webpage

    www.sec.gov/Archives/edgar/data/910569/000091056909000016/form6-k15june09.htm
    I have been trying to create a PDF from the above URL using Acrobat 8.1 using the "Create PDF from Web Page" function.  The Download Status form opens and shows the progress as files are downloaded and converted.  However Acrobat 8.1 always crashes before completing the task.  Acrobat 5.0 successfully completes the task although the formatting leaves a lot to be desired but that's another issue.
    I've tried various values for settings such as processing 1 level or getting entire site but the crash is consistent.
    I have also tried a couple of other machines in the office with the same crashed result.
    Can anybody suggest why Acrobat 8.1 would fail to render this URL into a PDF and what would cause it to crash so consistently?  Is there an alternate method of creating a PDF from this URL aside from loading it into Word and printing to a PDF?
    Any clues appreciated!

    The problem is likely that the web page does not conform to standard HTML. AA8 crashed on me also. You can print the file from your browser. The only thing that would be missing would be the 3 links near the bottom and they are easy to add.

  • How to not include the path when creating pdf from many html files?

    I use "Merge File into a Single File" to create a pdf file from many html files. However, the generated pdf file have the path information of the html files. I'm wondering how to generate a pdf without the path information.

    Go to CREATE > Create PDF from Web Page > Click the SETTINGS button on the dialog that follows > Uncheck "Place headers and footers on new page".
    Thanks!

  • Letters change when creating PDF

    I am using Acrobat Professional 6 and creating PDFs with the "Adobe PDF" icon it created when installed.
    Some documents from the Bloomberg system are converted by a sort of substitution cypher to gibberish. Capital letters are affected, but not lowercase. Capital letters are changed to the next letter in the alphabet. Also, numerals are increased by one. Exclamation points replace spaces, forward slashes replace periods, etc.
    For example, the original said this:
    Crandon Capital Partners v. Shelk, 202 Ore. 537
    The PDF says this:
    Drandon!Dapital!Qartners!v/!Shelk/!313!Pre/!648
    This is repeatable on different days and with different files.
    This does not happen with files from other sources, but the Bloomberg tech people insist it doesn't happen for them. I learned they are using Acrobat 8; could that be the difference?
    In any case, how do I fix it?
    Peter W. Schroth

    Look at the document properties (ctrl-D) under the font tab. You probably did not embed the fonts. I suspect you are using the Standard Settings which does not embed all fonts. Try changing the settings file to Press or Paper (I don't remember which ones are listed for AA8). You can also check the settings to be sure that the fonts are embedded (all of them) and probably subset.

  • Unusual error when creating PDF from Excel

    2 of my work computers started suffering from this 1 week ago in Excel 2003.
    All create buttons and dropdown menus work, the creation process goes through progress bars and such.
    At the end, an error box titled Acrobat PDFMaker displays this error;
    "An error occurred while saving the file. Please check if there is sufficient space in the temporary folder."
    It's Acrobat 8 and its been updated to the highest level for quite a while. No settings have been changed.
    Running on Windows XP Pro. PDF creation has worked fine before this.
    It still works fine on Word.
    The error is not on Google or here, so I assume I'm the first to ever get it!
    There's at least 40 GB free on the drives. I cleared the system temp folder for kicks, but no change.
    I did a generic uninstall and reinstall on one computer, reapplied updates, but error still pops up.

    Hello - this did not happen when I printed the file to the Adobe PDF printer.  It correctly sized the sheet as 8.5" x 11".  Thanks for the suggestion.  Also, it will properly print out to the physical printer. 
    The main problem is when I am combining several PDFs into one document, I have some sheets sized at 8.5" x 11" and some at 17" x 22", so the document looks strange when viewing it online.  I am still not sure why the Create PDF add-in creates a different sized PDF than the Print to PDF function. 

  • Color changes when creating PDF in Acrobat X Standard

    I'm printing to PDF from Word 2010 by using Acrobat X Standard.  Here are the two issues:
    I have overlaid two text boxes (different colors) on top of each other.  The overall image should be blue on top and bottom with tan in the middle.  When I print to PDF in Word, the PDF is perfect; however, when I print to the printer, the blue on the bottom changes to purple, while the blue on top is correct.  Again, this is the same blue text box, so I don't know why the color changes.
    Also, the tan is a darker shade than what the PDF shows.
    Is this a printer issue or PDF settings issue?
    I'm new to using Acrobat, so any step-by-step help is very much appreciated!
    Thank you.

    Create Adobe PDF is a (by default) a LOSSLESS operation where Acrobat processes the Word graphics data directly into PDF.   Printing is a LOSSY operation that first has Word convert Word->”printer spool”, then the printer driver (Adobe PDF) converts that “printer spool” into Postscript, and then Distiller converts the Postscript into PDF.   As you might imagine, you get MUCH higher quality and fidelity results from the former.
    Have you verified that you are using the same color management settings in the printer from both Word and Acrobat?  Is the Konica configured for Postscript, PCL, other?  There are SO MANY possible options that could be impacting your configuration…

  • Corrupt image formatting when creating pdf from embedded visio image in MS word

    Hello, Using Adobe Acrobat 9 standard and trying to create a PDF file from an MS word (version 2003) document.  PDF file created is fine except for an image (embedded visio diagram imported into word).  When created in PDF, the image is missing many of the diagram labels, and other text boxes are in the wrong font and wrong location.  I don't know if it's my Adobe Acrobat or MS Word settings that need to be updated.
    thanks, NB

    Dear fellows,
    the problem is still present.  My system:Windows 7 32-Bit Prof, MS Office 2010 Prof, Acrobat X Pro 10.1.1, Vision 2010 Prof, all updates installed.
    Problem #1: Even the latest Acrobat X 10.1.1 version causes Visio 2010 to start with error messages, origin: the Acrobat Add-In.  Therefore I de-activated the Acrobat Add-In, again, as in the past.
    As I design grafics with Visio 2010, I mark them in the active Visio window, copy the marked parts and then insert them into my Word-Document.  So far, so good and as I want it.
    The (still present) problem: I can produce a PDF file using the "save as Adobe PDF", but the Visio drawing is incomplete and corrupt.  E.g. arrows as line endings have disappeared.
    PS: But using Adobes PDF printer sets the embedded Visio drawing correctly!  But using the printer one looses some features of the "save as Adobe PDF" command.
    Well, probably one day ...
    Regards,
    Rückenlehne.

  • Unwanted blank pages inserted when creating pdf from scanner

    Hello, when creating a pdf from a document scanned via Adobe Acrobat X Pro, the program inserts an unwanted blank page in between each page  being scanned.  So, if scanning 50 pages, we get 100, etc.  How do we remediate this problem?  We have worked with the default settings, to no avail.  We're using a Fujitsu fi-5530c2 scanner.  We would appreciate any input to help resolve this issue!  Thanks Mark

    Hi,
    you can automaticaly fix previously made documents using the Preflight tool.

Maybe you are looking for