Documentation for SAP BASIS 6.40

Hi friends,
Where can we find documentation for the SAP BASIS 6.40 Scenarios in the IR.

Do you mean the demo examples provided in the SAP BASIS 6.40 SWC?
If yes, then the documentation for those can be found here:
http://help.sap.com/saphelp_nw04/helpdata/en/50/26414d5f462f4fb384094056d46175/frameset.htm
Cheers
Manish

Similar Messages

System copy tools for SAP Basis 46C.

Hi All,
I need to do system copy for SAP Basis 46c. I have a query regarding the tools used for system copy. It is written in the SAP Documents and we need to use the latest version of the system copy tools (i.e. R3load,R3check,R3ldctl,,R3szchk,R3trans).
I need to do the Heterogeneouse system copy
Source :- Oracle 9.2.0.8 , AIX 5.3
Target :- Oralce 9.2.0.8 (Or 10.2.0.4 if possible) , Sun Solaris
So my question is
1) Am i suppose to use only the tools (i.e. R3load,R3check,R3ldctl,,R3szchk,R3trans) which are compatible to relase 4.6C (Kernel 46D_EXT, latest path level is 2541) or
2) Can i download and use the Latest version of system copy tools (i.e. Withe release 7.00 for R3load,R3check,R3ldctl,,R3szchk,R3trans) to do the herogeneous system copy of SAP Basis 4.6C ??
Please reply.
Thanks

> Yes we are aware about the certified consultant. But before going for such a big project we wanted to find out the possibilities how we can minimise system downtime and optimize the process therefore wanted to have some information earlier.
Exactly that is the use of that consultant Those are experienced people who have done lots of migrations in the past, they know the possibilities of the tools and versions.
> So now i am very sure that we can use 10.2 while installation of new target system while doing heterogenouse system copy from oracle 9.2.
Correct.
> 1) Migration Monitor (source :-System copy & Migration optimization.pdf)
> The Migration Monitor is downward-compatible. As new features and bug fixes are only implemented in the latest version, SAP urgently recommends that you always use the latest version available.
You can use it of course but support of it is not "built in" - there's no clicker to check as is in newer versions of sapinst. You will need to modify the R3S file at the "correct place" to make use of it.
> 2) Distribution Monitor (Source :- Distribution Monitor (version 1.9.1) Usersu2019 Guide)
> Restrictions:-The following restrictions apply to the current implementation:The DM does not support system copies of releases lower than SAP_BASIS 6.20
So you can't use that option.
> 3) PACKAGE SPLITTING (source :-System copy & Migration optimization.pdf)
> The package splitting option is available and integrated into the system copy tools R3SETUP and SAPinst since SAP R/3 4.0B SR1.
The "old version" is a perl script, you'll need to make sure you have perl installed.
>
> 4) TABLE SPLITTING (source :-System copy & Migration optimization.pdf)
> AVAILABILITY:
> Table splitting can be used for ABAP systems with SAP kernel 6.40 or above
So that is also not usable.
> 6) R3LOAD OPTIONS - (source :-System copy & Migration optimization.pdf)
> R3load option '-fast' (<= 4.6D) or '-loadprocedure fast': These options are available
> u2022 from SAP kernel release 6.40 for - DB2/UDB - MSSQL - Oracle (see SAP Note 1045847 - Oracle Direct Path Load Support in R3load)
So it's also not built in for Kernel 46D_EX2.
> Request your final comments on the above points and Need to know whether parallel import and export can be done for 4.6C (46D_EXT Kernel) release using migration monitor. Please reply.
As I said before and as is written in the documentation, it can be used but not "by default", you'll make sure you stop at the right place with your migration to configure it manually (or the consultant will do).
Markus

PI 730 - XI Content for SAP BASIS

Dear Support,
When I searched the SAP Marketplace for "PI 730 - XI Content for SAP BASIS", I have found the files which has .SCA extension instead of .tpz or .zip file extension.
Am I looking into a wrong directry if so, could you please help me in pointing to the correct directory?
Otherwise, could you please let me know the way to Import the Design Objects onto PI 730 system?
Thank you,
Nikee

Hello
The 7.30 SAP Basis content is delivered as a *sca file. You need to extract the *tpz file from this and import into the ESR in the normal manner. See the kba #1637955 PI ESR Content for SAP BASIS 7.30 for further details.
P.S. point 6 of the previous post is incorrect - "Under this you can get XI CONTENT PI_BASIS". It is available under XI CONTENT SAP_BASIS (not PI_BASIS)
Regards
Mark

What is the equalent module for SAP BASIS in ORACLE

Hi,
This is Krishna, i am new to Oracle, i am working as SAP BASIS Consultant and now i am planing to shift oracle please anybody help me " what is the equalent module for SAP BASIS in *Orcale*?".
Thanks in Advance to Everybody.
Krishna,
SAP BASIS Consultant
Edited by: user12292549 on Nov 30, 2009 11:41 PM

Hi,
Just use Trinidad's, I don't think 11g has an equivalent and Chris suggestion won't really work in this case as visible="false" is the same as rendered="false" for decoding purpose and you want it to be decoded in your case. Another poor man's solution would be
<af:inputText value="..." inlineStyle="display:none;"/>Regards,
~ Simon

Integration documentation for sap sd with fico and mm

hi Sappers,
I need Documentation for SAP SD with FICO and MM Module
its very urgent.
mail id : [email protected]

Some basic information :
FI-MM: The integration between FI-MM happens in T-code: OBYC
1. When PO is created :
No Entry -
2. When GR is posted
 Inventory Account dr (Transaction Key BSX in OBYC)
 To GRIR account (T.Key WRX in T-code OBYC)
3. When Invoice is posted
 GRIR account Dr.
 Vendor account Cr.
4. Payment made to Vendor
 Vendor A/c Dr
 To Bank Clearing A/c Cr.
Points to know : Movement Types, Assignment of Movement types to T-keys (T-code OMJJ), Value string (I also need some information on this) , OMWN and OMWB transactions.
There is a close integration b/w FI & MM, actually document flows from MM to FI in the following areas such as,
 1. Movement Types:
Used to enable the system to find the predefined posting rules determining how the accounts of financial accounting system are to be posted & to update the stock fields in the matrl master data.(Goods Receipt, Goods Issue, etc)
 2. Valuation Class:
Assignment of material to grp of gl account, used to determine the gl accounts that are updated as a result of goods movement.
3. Transaction/Event key:
Used to control the storage or filing of documents & assignment of documents.Used to differeniate b/w various transactions such as goods movement tht occur in inventory.
 4. Material Type:
Each material should assign mtrl type in mtrl master record used to update whether changes made in qty are updated in material master record & change in value also updated in stock account.
 FI-SD Integration:
The integration is done in T-code VKOA
 1. Sales Order Created
 -No Entry-
2. PGI done (Goods issue)
 Cost of Goods Sold Dr (Configured in OBYC GBB T-Key)
 To Inventory Account
 3. Billing document released to Accounting
 Customer Account Dr.
 To Sales Revenue Account (ERL T-key in Pricing procedure)
Note : The GL account is assigned to this ERL in VKOA
 4. Payment Received
 Bank Clearing A/c Dr
 Customer A/c Cr.
Points to Know : Good to understand the pricing procedure and how the different transaction keys are used like ERL, ERS etc

Video Tutorials for SAP Basis & Security

Hi,
Is Any CBT Nuggets/Video Tutorials are also available for SAP Basis & Security???
please provide me the link if it is available

Saurabh,
You cannot expect A to Z of SAP Basis and Security tutorials in videos. May be you can find some basic to important information.
Refer to the links though
www.youtube.com/watch?v=OT4PQarbT0k
www.learnsap.com/config/basis.html
http://sapdownloads.blogspot.com/.../sap-basis-training-for-beginners.html
Just google it, you will find loads of information.
Good Luck
Regards,
Arjun

Docs for SAP Basis.

Hi
I am looking for best DOCS for SAP Basis to refer.
Would really appreciate if anyone could suggest me.

Hi,
AFAIK, you are requesting copyrighted Material.
You can access SAP Material after attending the respective training.
If you cannot attend the training, then follow the links mentioned on the thread.
Edit: -> The post I refer to has been deleted
Edited by: Fidel Vales on Jan 26, 2008 11:51 AM

Career for SAP Basis consultant

Dear Friends,
I am into SAP Basis, most of the jobs have been outsourced in UK as such there are hardly any jobs in sap basis . Please can u kindly suggest me what is the next best option for SAP Basis for more career opportunities. Please kindly suggest me, I don't have job for last 10 months.
Thanks.
aarya

I am trying to reply all the bullets in your post one by one.
Some of the agencies (AtoS and some others) I have got in touch with to discuss this certification have suggested doing SAP SD or MM certification, keeping my experience in view. If I do it what is your guess how soon I could find a job with this certification.
for training and certification you can go to any SAP authorized institute , you can find many depends upon which country you are presently staying.
What kind of salary will I be able to attract if I do get a job. Currently I am getting good salary by auto industry standards (around $15K). As per the information I have got the starting salaries in these roles are some times less than half of what I am getting now.
if you are already at $15K (1,50,000 US Dollar if i correctly understand) then you are earning much higer then a SAP consultant having a decade experience in SAP. Better look for management job. If salary is the criteria.
Finally how fast is the growth in this industry? Let us say I do the certification spend some $500 and join a company with salary less than half of my current. After doing this, as per your experience how soon will I be able to reach or exceed the salary I would have been getting otherwise (assume I perform fairly well in my SAP role ;-).
refer the above one
So finally should I go ahead with the certification?
Certification is optional , if you just have user level experience you may not be knowing all what comes within an module, i still recommend training as it give you all back ground about SAP and you can understand most of the master data piece to create a right foundation for a module.
Hope this will help you.
Thanks
Ritesh

Masterthesis or Internship Topic for SAP BASIS /SAP HANA/Solman

Dear Members,
I am student and i need some topics for my Internship and thesis in SAP BASIS or SAP HANA or Solution Manager.
Could you please suggest some Topics for SAP BASIS ,SAP HANA and Solman?
Thanks & Regards
Bira

Hello Peter,
I agree with you completely.
Company has consultants and they have already some topics but they asked me to find myself also .Also consult my university.
For Internship ,there is no specific requirement .I would like to do Internship (6 months) and then later thesis.I was just thinking ,if both topic would be same that would be great otherwise its okay.I have some know-how of SAP BASIS.
What about i do Internship in some topic in SAP BASIS and later Master thesis in SAP HANA?Would this option would be good for my future?
Thanks&Regards
Biral

Lean & Agile For SAP Basis Tasks

I am currently working on a project that uses the Lean & Agile approach for functional implementation. I was just wondering if anyone has used this approach from an SAP Basis side and if so can you please point me in the direction for some documentation?
Any experience you can share will be most appreciated!
Thanks!
MJ

Hi Marilyn,
I'm not sure if you made any progress on this, but I have some useful experiences in this space.
If you'd like to discuss, please message me.
Stuart

Create documentation for sap query

Hello,
I have created a sap query with sq01 and I want to create also documentation for it.
I go from se38--> select the program and then change documentation,
but the documentation button is grey.
Thank you!

Hi,
Check this below link
http://help.sap.com/saphelp_nw04s/helpdata/en/4f/83a6302fe1403db4289e2ac60b800a/frameset.htm
Regards,
Jyothi CH.

Documentation for SAP function modules??

Hello,
is there any documentation for the SAP function modules available?
I need documentation for SJ01 (SAP Objects). If I try to view the documentation in SE80, I get the error message: "Document OJ_XXX(whatever I selected) is not available in language DE"
Where can I get this documentation?
Is there an overview+documentation available somewhere of all SAP functions which may be used for own programs? Or how do I know what's already available and how to use it?
Thanks
Steffi

Hi,
Go thru this links
http://sap.ittoolbox.com/topics/t.asp?t=303&p=449&h2=322&h1=303&h3=449
http://www.erpgenie.com/abap/functions.htm
Thanks
Sunil

Documentation for SAP APO

Gurus,
Anyone has good documentation for APO DP and SNP. I heard there are cubes and DSOs on the APO side also so wanted to learn more about that. Any pointers/information will be really helpful.
Is APO the product SAP is going with or it is being replaced with something else?Thanks.
Thanks & Regards,
AK

HI,
Refer below threads
[http://help.sap.com/saphelp_scm70/helpdata/EN/59/a3453ff168e07fe10000000a114084/frameset.htm]
[http://wiki.sdn.sap.com/wiki/display/SCM/APO-DP]
[http://wiki.sdn.sap.com/wiki/display/SCM/APO-SNP]
Also you will get configuration guide for SNP at below link
[http://help.sap.com/bp_scmv250/BBLibrary/Documentation/B06_BB_ConfigGuide_EN_DE.doc]
Thanks

Generating Proxies for SAP Basis Objects?

All,
Is it possible to generate proxies for your interfaces under SAP Basis Component?
1. I checked in SPROXY on my R3 and the SAP Basis Component is not displayed here.What I also noticed is that none of the SWCV's containing Pre Delivered Integration Content is displayed in SPROXY.
Is it necessary that the options , All Objects are Modifiable and Original Objects be selected for Proxies to be generated on the SAP Shipped SWCV's?
2. As a work around ( one which did not work ) I created a Depenedency in the SLD for my SWCV on the SAP BASIS Swcv and I am now able to see the BASIS Objects in the IR under my Custom SWCV .
But even then in SPROXY , (basis Objects )message interfaces are not displayed.
Has anyone tried something of this sort? Is there some setting we need to do to enable proxy generation for SAP Delivered Components?
Regards
Bhavesh
PS: I am able to see my custom SWCV in SPROXY and trigger proxy calls Successfully.
I can generate a Custom Messge interface using the Message Type of the SAP Basis Component and create the Proxy to this Message interface . But, I just want to know if anyone has had success with the above concepts

>but they are already generated... do you see that ?
I did notice it. But didnt dig deep enough . Will give this a real close look tom morning .
>>>>Does this imply, that we cannot generae proxies on SAP Basis Components?
indeed
That answered my Question Thanks for the info.
I guess I will have to create a message Interface will the Message Type from the BASIS Component and use this Message Interface.
The only issue I am now wondering with this approach would be, what if the Message Type structure changes during some SP upgrade? Due to some new feature being added?
Any experiences to share michal?
Thanks a bunch for all those inputs.
Regards
Bhavesh

Documentation for SAP MILL

Dear Seniors,
I am a SAP Consultant with experience in PP. I have now a request for a customer that uses SAP MILL.
I was trying to find on the internet some resources about SAP MILL and I did not find much.
Do you know where I can find documentation about SAP MILL or some SAP standard courses about this ?
Many thanks in advance for your great support,

Dear Alex,
can yuo help me and explain briefly what you mean with "SAP Mill"?
Has the customer activated the DIMP (Discrete Industries Mill Products)-Industry Externsion in ECC - and you would thus like to learn more about IS-MP-PP?
Are you interested only in PP functionality, or also functionality related to SAP APO?
As a starting point you always use help.sap.com and follow the path:
SAP Business Suite - SAP ERP - you release - and application help.
Further on to "Industries in SAP ERP" - SAP Discrete Industries and Mill Products" - SAP Mill Products.
Or you can directly click here: SAP Mil Products and select the application area you are interested in.
Are you looking for a solution to a specific problem?
Regards,
Stefan

Documentation for SAP BASIS 6.40

Similar Messages

Maybe you are looking for