Documentation on portal from BW syst

I want to put the documentation for the report in the 'Documentation
Button' available on Portal. Where should I maintain this
documentation so that it appears on portal?
Also, is there a way to add scroll overs on the fields? As in, if I
move the mouse on the character/keyfigure in the report - a box
appears which has some details about that field.
Regards

Heike,
Thanks for your help in this. BWD and BQ2 are both on the same SP. SAP_BW release 350 level 10 (SAPKW35010) with BI_CONT at release 352 level 5 (SAPKIBIEP5).
I invalidated the server cache following your instructions and tried again, but am still having the same problem in BWD. The initial display gets the "Done, but with errors on page" message until any navigation is done.
I am using IE 6.0.2900.2180.xpsp_sp2_rtm.040803-2158 when I execute queries on both BWD and BQ2.
Please, do you have any other suggestions?
Thanks,
Jeri

Similar Messages

  • What is the best practices recommended from microsoft to give access a intranet portal from internet externally

    Hi
    what is the best practices recommended from microsoft
    i have a intranet portal in my organization used by employees  and i want to give access for employees to access external from  internet also
    can i use same url  for employees access intranet portal from internally and externally or diffrent url?
    like ( https://extranet.xyz.com.in)  and (http://intranet.xyz.com.in)
    internal url access by employees is( http://intranet.xyz.com.in)
    and this portal configured with claims based authentication
    here i have a F5 for load blance and
     a request from external to F5 is https request and F5 to sharepoint server http request
    and sharepoint server to F5 is http request but F5 to external users it is https response so 
    when i change below settings in alternate access mapings   all links changed to https
    but only authentication link is still showing http and authentication page not opened.
    adil

    Hi,
    One of my clients has an environment similar to yours with an internal pair of F5s and a pair used for the access from the internet. 
    I am only going to focus on the method using an F5 Load Balancer and SSL Offloading. the setup of the F5 will not be covered in detail but a reference to the documentation to support SharePoint and SSL Offloading will be provided
    Since you arte going to be using SSL Offloading you do not need to extend your WebApps to use separate IIS WebSites with Unique IP Addresses
    Configure the F5 with SSL Offloading
    Configure a Internal AAM for SSL (HTTPS) for each WebApp that maps to the Public HTTP FQDN AAM Setting for each WebApp
    Our environment has an additional component we require RSA Authentication for all internet facing Sites. So we have the extra step of extending the WebApp to a separate IIS WebSite and configuring RSA for each extended WebSite.Reference:
    Reference SharePoint F5 Configuration:
    http://www.f5.com/featured/video/ssl-offloading/
    -Ivan

  • Error Deploying Sample Portal from Development Guide

    I am going through creating a New Portal from WebLogic Portal 7 Development
    Guide and I am running into the following problem.
    After completing Step 2: Create the New Portal, when I try to Hot Deploy the
    application, I get the following error.
    Hot deploy failed with the following message:
    Unable to add module: NewPortalWebApp to application descriptor for:
    portalApp.
    The log has the following information..
    Adding file:
    C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
    portlets\Portlet1.portlet to sync list.
    Adding file:
    C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
    webapps\PortalWebApp\tools.wf to sync list.
    Adding file:
    C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
    webapps\PortalWebApp\webflow-extensions.wfx to sync list.
    Adding file:
    C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
    webapps\PortalWebApp\user_account.wf to sync list.
    Adding file:
    C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
    webapps\PortalWebApp\portal.wf to sync list.
    Adding file:
    C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
    webapps\PortalWebApp\security.wf to sync list.
    Adding file:
    C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
    webapps\PortalWebApp\NewPortal.portal to sync list.
    Attempting sync...
    Sync complete.
    Searching for portalApp application descriptor...
    Found it.
    Error - please check log for details.

    That's great, Mike, you're welcome. I'm glad it's working for you. Thanks for letting me know.
    -Scott
    Mike Friesen wrote:
    I'm sorry you were right.. I tried it and everything works... thanks..
    Mike
    "Scott Ellis" <[email protected]> wrote in message
    news:[email protected]...
    Hi Mike,
    I hear what you are saying and I believe you. But the error you describedis the known issue related to Internet access
    (down to the exact line numbers in the stack trace). Is it possible yourconnection was down last time you attempted
    hot-deploy?
    If you are sure your Internet connection is up, I would recommend tryinghot-deploy again. If it still does not work,
    something very strange is going on. At that point I would recommendtrying the workaround anyway or escalating the issue
    to BEA Support.
    Now my curiosity is piqued so I hope you'll let me know either way.
    Best Regards,
    Scott Ellis
    BEA Systems
    Mike Friesen wrote:
    yes..
    "Scott Ellis" <[email protected]> wrote in message
    news:[email protected]...
    Can you please try something for me? Paste the following URL into abrowser:
    http://java.sun.com/dtd/application_1_3.dtd
    Does it come up?
    Thanks,
    Scott
    Mike Friesen wrote:
    Actually, my computer does have internet access, so I don't think that
    is
    the problem.
    Mike
    "Scott Ellis" <[email protected]> wrote in message
    news:[email protected]...
    Hi Mike,
    I would bet that you are working on a machine that doesn't have
    Internet
    access, correct?
    The problem is that the EBCC is trying and failing to access the J2EEapplication descriptor
    dtd from Sun's website.
    If you can't get Internet access, here is the workaround:
    - save the attached file to your harddrive (just save it to c:\)
    - edit the application.xml file for your project as follows:
    - first copy the entire DOCTYPE declaration and save it somewhere
    in
    a
    separate text file (in case want to revert back to it later)
    - edit the DOCTYPE declaration so that it looks like this:
    <!DOCTYPE application PUBLIC '-//Sun Microsystems, Inc.//DTD J2EEApplication 1.3//EN' 'file:///application_1_3.dtd'>
    ( notice that the java.sun.com web address is replaced with the URI
    to
    the file on your harddrive)
    - save your changes and hotdeploy will work with or without Internetaccess
    Thanks,
    Scott Ellis
    BEA Systems
    Mike Friesen wrote:
    I am going through creating a New Portal from WebLogic Portal 7
    Development
    Guide and I am running into the following problem.
    After completing Step 2: Create the New Portal, when I try to Hot
    Deploy
    the
    application, I get the following error.
    Hot deploy failed with the following message:
    Unable to add module: NewPortalWebApp to application descriptor for:
    portalApp.
    The log has the following information..
    Adding file:
    C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
    portlets\Portlet1.portlet to sync list.
    Adding file:
    C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
    webapps\PortalWebApp\tools.wf to sync list.
    Adding file:
    C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
    webapps\PortalWebApp\webflow-extensions.wfx to sync list.
    Adding file:
    C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
    webapps\PortalWebApp\user_account.wf to sync list.
    Adding file:
    C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
    webapps\PortalWebApp\portal.wf to sync list.
    Adding file:
    C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
    webapps\PortalWebApp\security.wf to sync list.
    Adding file:
    C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
    webapps\PortalWebApp\NewPortal.portal to sync list.
    Attempting sync...
    Sync complete.
    Searching for portalApp application descriptor...
    Found it.
    Error - please check log for details.
    <!--
    Copyright (c) 2000 Sun Microsystems, Inc.,
    901 San Antonio Road,
    Palo Alto, California 94303, U.S.A.
    All rights reserved.
    Sun Microsystems, Inc. has intellectual property rights relating to
    technology embodied in the product that is described in this document.
    In particular, and without limitation, these intellectual property
    rights may include one or more of the U.S. patents listed at
    http://www.sun.com/patents and one or more additional patents or
    pending patent applications in the U.S. and in other countries.
    This document and the product to which it pertains are distributed
    under licenses restricting their use, copying, distribution, and
    decompilation. This document may be reproduced and distributed but
    may
    not be changed without prior written authorization of Sun and its
    licensors, if any.
    Third-party software, including font technology, is copyrighted and
    licensed from Sun suppliers.
    Sun, Sun Microsystems, the Sun logo, Java, JavaServer Pages, Java
    Naming and Directory Interface, JDBC, JDK, JavaMail and and
    Enterprise JavaBeans are trademarks or registered trademarks of Sun
    Microsystems, Inc. in the U.S. and other countries.
    Federal Acquisitions: Commercial Software - Government Users Subjectto
    Standard License Terms and Conditions.
    DOCUMENTATION IS PROVIDED "AS IS" AND ALL EXPRESS OR IMPLIED
    CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED
    WARRANTY OF MERCHANTABILITY, FITNESS FOR FOR A PARTICULAR PURPOSE OR
    NON-INFRINGEMENT, ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH
    DISCLAIMERS ARE HELD TO BE LEGALLY INVALID.
    Copyright (c) 2000 Sun Microsystems, Inc.,
    901 San Antonio Road,
    Palo Alto, California 94303, E'tats-Unis.
    Tous droits re'serve's.
    Sun Microsystems, Inc. a les droits de proprie'te' intellectuels
    relatants a` la technologie incorpore'e dans le produit qui est
    de'crit
    dans ce document. En particulier, et sans la limitation, ces droits de
    proprie'te' intellectuels peuvent inclure un ou plus des brevets
    ame'ricains e'nume're's a` http://www.sun.com/patents et un ou les
    brevets plus supple'mentaires ou les applications de brevet en attente
    dans les E'tats-Unis et dans les autres pays.
    Ce produit ou document est prote'ge' par un copyright et distribue'
    avec des licences qui en restreignent l'utilisation, la copie, la
    distribution, et la de'compilation. Ce documention associe n peut
    e^tre reproduite et distribuer, par quelque moyen que ce soit, sans
    l'autorisation pre'alable et e'crite de Sun et de ses bailleurs de
    licence, le cas e'che'ant.
    Le logiciel de'tenu par des tiers, et qui comprend la technologie
    relative aux polices de caracte`res, est prote'ge' par un copyright et
    licencie' par des fournisseurs de Sun.
    Sun, Sun Microsystems, le logo Sun, Java, JavaServer Pages, Java
    Naming and Directory Interface, JDBC, JDK, JavaMail et and
    Enterprise JavaBeans sont des marques de fabrique ou des marques
    de'pose'es de Sun Microsystems, Inc. aux E'tats-Unis et dans d'autres
    pays.
    LA DOCUMENTATION EST FOURNIE "EN L'E'TAT" ET TOUTES AUTRES CONDITIONS,
    DECLARATIONS ET GARANTIES EXPRESSES OU TACITES SONT FORMELLEMENT
    EXCLUES, DANS LA MESURE AUTORISEE PAR LA LOI APPLICABLE, Y COMPRIS
    NOTAMMENT TOUTE GARANTIE IMPLICITE RELATIVE A LA QUALITE MARCHANDE, A
    L'APTITUDE A UNE UTILISATION PARTICULIERE OU A L'ABSENCE DE
    CONTREFAC,ON.
    -->
    <!--
    This is the XML DTD for the J2EE 1.3 application deployment
    descriptor. All J2EE 1.3 application deployment descriptors
    must include a DOCTYPE of the following form:
    <!DOCTYPE application PUBLIC
    "-//Sun Microsystems, Inc.//DTD J2EE Application 1.3//EN"
    "http://java.sun.com/dtd/application_1_3.dtd">
    -->
    <!--
    The following conventions apply to all J2EE deployment descriptor
    elements unless indicated otherwise.
    - In elements that contain PCDATA, leading and trailing whitespace
    in the data may be ignored.
    - In elements whose value is an "enumerated type", the value is
    case sensitive.
    - In elements that specify a pathname to a file within the same
    JAR file, relative filenames (i.e., those not starting with "/")
    are considered relative to the root of the JAR file's namespace.
    Absolute filenames (i.e., those starting with "/") also specify
    names in the root of the JAR file's namespace. In general, relative
    names are preferred. The exception is .war files where absolute
    names are preferred for consistency with the servlet API.
    -->
    <!--
    The application element is the root element of a J2EE application
    deployment descriptor.
    -->
    <!ELEMENT application (icon?, display-name, description?, module+,
    security-role*)>
    <!--
    The alt-dd element specifies an optional URI to the post-assembly
    version of the deployment descriptor file for a particular J2EEmodule.
    The URI must specify the full pathname of the deployment descriptor
    file relative to the application's root directory. If alt-dd is not
    specified, the deployer must read the deployment descriptor from the
    default location and file name required by the respective component
    specification.
    Used in: module
    -->
    <!ELEMENT alt-dd (#PCDATA)>
    <!--
    The connector element specifies the URI of a resource adapter archive
    file, relative to the top level of the application package.
    Used in: module
    -->
    <!ELEMENT connector (#PCDATA)>
    <!--
    The context-root element specifies the context root of a web
    application.
    Used in: web
    -->
    <!ELEMENT context-root (#PCDATA)>
    <!--
    The description element is used to provide text describing the parent
    element. The description element should include any information that
    the application ear file producer wants to provide to the consumer of
    the application ear file (i.e., to the Deployer). Typically, the tools
    used by the application ear file consumer will display the description
    when processing the parent element that contains the description.
    Used in: application, security-role
    -->
    <!ELEMENT description (#PCDATA)>
    <!--
    The display-name element contains a short name that is intended to be
    displayed by tools. The display name need not be unique.
    Used in: application
    Example:
    <display-name>Employee Self Service</display-name>
    -->
    <!ELEMENT display-name (#PCDATA)>
    <!--
    The ejb element specifies the URI of an ejb-jar, relative to the top
    level of the application package.
    Used in: module
    -->
    <!ELEMENT ejb (#PCDATA)>
    <!--
    The icon element contains small-icon and large-icon elements that
    specify the file names for small and a large GIF or JPEG icon images
    used to represent the parent element in a GUI tool.
    Used in: application
    -->
    <!ELEMENT icon (small-icon?, large-icon?)>
    <!--
    The java element specifies the URI of a java application clientmodule,
    relative to the top level of the application package.
    Used in: module
    -->
    <!ELEMENT java (#PCDATA)>
    <!--
    The large-icon element contains the name of a file
    containing a large (32 x 32) icon image. The file
    name is a relative path within the application's
    ear file.
    The image may be either in the JPEG or GIF format.
    The icon can be used by tools.
    Used in: icon
    Example:
    <large-icon>employee-service-icon32x32.jpg</large-icon>
    -->
    <!ELEMENT large-icon (#PCDATA)>
    <!--
    The module element represents a single J2EE module and contains a
    connector, ejb, java, or web element, which indicates the module type
    and contains a path to the module file, and an optional alt-ddelement,
    which specifies an optional URI to the post-assembly version of the
    deployment descriptor.
    The application deployment descriptor must have one module element for
    each J2EE module in the application package.
    Used in: application
    -->
    <!ELEMENT module ((connector | ejb | java | web), alt-dd?)>
    <!--
    The role-name element contains the name of a security role.
    The name must conform to the lexical rules for an NMTOKEN.
    Used in: security-role
    -->
    <!ELEMENT role-name (#PCDATA)>
    <!--
    The security-role element contains the definition of a security
    role. The definition consists of an optional description of the
    security role, and the security role name.
    Used in: application
    Example:
    <security-role>
    <description>
    This role includes all employees who are authorized
    to access the employee service application.
    </description>
    <role-name>employee</role-name>
    </security-role>
    -->
    <!ELEMENT security-role (description?, role-name)>
    <!--
    The small-icon element contains the name of a file
    containing a small (16 x 16) icon image. The file
    name is a relative path within the application's
    ear file.
    The image may be either in the JPEG or GIF format.
    The icon can be used by tools.
    Used in: icon
    Example:
    <small-icon>employee-service-icon16x16.jpg</small-icon>
    -->
    <!ELEMENT small-icon (#PCDATA)>
    <!--
    The web element contains the web-uri and context-root of a web
    application module.
    Used in: module
    -->
    <!ELEMENT web (web-uri, context-root)>
    <!--
    The web-uri element specifies the URI of a web application file,
    relative to the top level of the application package.
    Used in: web
    -->
    <!ELEMENT web-uri (#PCDATA)>
    <!--
    The ID mechanism is to allow tools that produce additional deployment
    information (i.e., information beyond the standard deployment
    descriptor information) to store the non-standard information in a
    separate file, and easily refer from these tool-specific files to the
    information in the standard deployment descriptor.
    Tools are not allowed to add the non-standard information into the
    standard deployment descriptor.
    -->
    <!ATTLIST alt-dd id ID #IMPLIED>
    <!ATTLIST application id ID #IMPLIED>
    <!ATTLIST connector id ID #IMPLIED>
    <!ATTLIST context-root id ID #IMPLIED>
    <!ATTLIST description id ID #IMPLIED>
    <!ATTLIST display-name id ID #IMPLIED>
    <!ATTLIST ejb id ID #IMPLIED>
    <!ATTLIST icon id ID #IMPLIED>
    <!ATTLIST java id ID #IMPLIED>
    <!ATTLIST large-icon id ID #IMPLIED>
    <!ATTLIST module id ID #IMPLIED>
    <!ATTLIST role-name id ID #IMPLIED>
    <!ATTLIST security-role id ID #IMPLIED>
    <!ATTLIST small-icon id ID #IMPLIED>
    <!ATTLIST web id ID #IMPLIED>
    <!ATTLIST web-uri id ID #IMPLIED>

  • Documentation of Portal Implementation - Experiences Required!

    Dear EP Experts & NW Gurus,
    I would like to know:
    1)Any amount of portal implementation includes creation of Portal objects and PAR files, systems etc etc..
    Moving these portal objects from one env to other some times involves changing few properties..Here i would like to know as to how are the EP developers documenting the Portal Developement?
    2) How are the diff companies & consultants following the process of Design, Specs, TestCases & implementation?
    Since there are so many properties involved for portal objects, these properties need to be documented so that if some problem happens in prod system then the docs can be consulted to find out whether the properties are correct or not?
    3) How does SAP themselves do the documentation of their releases?Is there some tools that they have created which queries some kind of databases & which just dumps the properties etc into some excel format...?
    Why i am asking this is bcos (in our case) after such a large implementation (hundreds of portal objects & tons of config..), the docs which we created have become so heavey and big it sometimes becomes diff to manage the docs manually. & then when we have team scenario,(where many ppl work & new ppl come & join..)these docs maintainance is painfull.
    4) Most of the time after implementaion, where the support starts and when old iView keeps on changing as per new req, <b>is there any Standard way by which we can maintain the versions of Portal objects and config..??</b>
    Please remember that i am talking abt all the phases of Soft Dev (High level Design, Specs, TestCases)..
    I would like to discuss what kind of documennation does SAP & others do for portal implementations..
    Regards
    Gaurav

    Hi Dagfinn,
    Thanx for the reply..
    I also think that the documentation should never become a burden..but a boon..
    - Can you explain in detail about the first point (writing script)..are u saying that by some means i traverse the PCD and pickup the portal objects etc..
    - We are on NW and have also configuared JDI recently. But how to use JDI for such kind of requirement.
    Also as i asked, do u have any knowledge about Version Maintanance of Portal Objects?
    The reason why i am again asking this is because what has happened recently is that since many ppl work on same objects and later on if an administrator wants to debug that who has changed what property -> it becomes diff to find out. even if i find that who has changed by "Changed by" but out of soo many propertes of any iView, which one was changed????
    Regarding your answer about PCD Databases Browser.. in thread (Changing name of PCD object EP 6.0 SP11)
    <i>Yes,
    You can use the PCD database browser to change pcd properties, though I am not sure if it is included in NetWeaver.
    Dagfinn</i>
    I am on SP11 & SP9, and i am able to find that tool, but still not able to successfully connect. As soon as i connect, i willlet u know...
    What about the other people here in SDN, what do the others have to say...??
    Regards
    Gaurav Gandhi

  • Error while upgrading Portal from 10.1.2 to 10.1.4

    This is the error message I am getting when I try to upgrade portal from 10.1.2 to 10.1.4 by applying the patch.
    NOTIFICATION:1 Framework: Error: Component upgrade failed PORTAL
    NOTIFICATION:1 Framework: Error: PORTAL component version is: 10.1.2.0.2 INVALID.
    Please let me know if any has has a solution?
    ==========================================
    D:\Software\Oracle\IDM\as_windows_x86_portal_1014\mrua_051020\mrua>mrua.bat -ora
    cle_home D:\Software_Installations\OraHome_Infra_01 -oid_host <hostname> -oid_ssl_port 636
    Executing mrua.pl
    Running on Windows
    OracleAS Metadata Repository Upgrade Assistant 10.1.4.0.0
    Enter the password for SYS:
    Enter the password for cn=orcladmin:
    Enter the password for cn=orcladmin:
    Upgrading the OracleAS Metadata Repository to release 10.1.4.0.0
    Calling upgrade plugin for MRUA
    Component has already been upgraded MRUA
    Calling upgrade plugin for PORTAL
    Error: Component upgrade failed PORTAL
    Error: PORTAL component version is: 10.1.2.0.2 INVALID
    Calling upgrade plugin for MRC
    Component has already been upgraded MRC
    FAILURE: Some OracleAS plug-ins report failure during upgrade.
    Log file: D:\Software_Installations\OraHome_Infra_01\upgrade\logs\mrua2007-07-1
    3_02-07-15PM.log
    Finished mrua.pl

    That didn't help for me....
    I have those things shut down already and you can see below what I'm getting on the re-run:
    -bash-3.00$ /app/oracleas/as1012portal/bin/emctl stop iasconsole
    Oracle Enterprise Manager 10g Application Server Control Release 10.1.2.0.2 Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
    http://asdev:1811/emd/console/aboutApplication
    Stopping Oracle Enterprise Manager 10g Application Server Control ...
    Cannot determine Oracle Enterprise Manager 10g Application Server Control process; /app/oracleas/as1012portal/bin/emctl.pid does not exist.
    Oracle Enterprise Manager 10g Application Server Control may not be running.
    -bash-3.00$ /app/oracleas/as1012portal/opmn/bin/opmnctl stopall
    opmnctl: opmn is not running
    -bash-3.00$ mrua/mrua.sh -oracle_home /app/oracleas/as1014metadatarepository -oid_host asdev -oid_ssl_port 636
    Executing mrua.pl
    Running on UNIX
    OracleAS Metadata Repository Upgrade Assistant 10.1.4.0.0
    Enter the password for SYS:
    Enter the password for cn=orcladmin:
    Upgrading the OracleAS Metadata Repository to release 10.1.4.0.0
    Calling upgrade plugin for MRUA
    Component has already been upgraded MRUA
    Calling upgrade plugin for PORTAL
    Error: Component upgrade failed PORTAL
    Error: PORTAL component version is: 10.1.2.0.2 INVALID
    Calling upgrade plugin for MRC
    Component has already been upgraded MRC
    FAILURE: Some OracleAS plug-ins report failure during upgrade.
    Log file: /app/oracleas/as1014metadatarepository/upgrade/logs/mrua2007-10-23_00-42-55PM.log
    Finished mrua.pl
    -bash-3.00$ grep PORTAL /app/oracleas/as1014metadatarepository/upgrade/logs/mrua2007-10-23_00-42-55PM.log
    2007/10/23 12:43:06.236 CST NOTIFICATION:1 Framework: Calling upgrade plugin for PORTAL
    2007/10/23 12:43:28.203 CST NOTIFICATION:1 Framework: Error: Component upgrade failed PORTAL
    2007/10/23 12:43:28.209 CST NOTIFICATION:1 Framework: Error: PORTAL component version is: 10.1.2.0.2 INVALID
    There is another oracle instance we have, the one that is hosting the LDAP server, and after the above I also tried doing a stopall there, then bringing up only the ldap server which is required for the upgrade, and then shutting down the iasconsole for that instance too so that only the ldap server remained, then re-running the portal upgrade. It didn't help.
    Any ideas?

  • Upgradng the enterprise portal from non HA to HA

    Dear Experts,
    We have Enterprise portal 7.01 on windows 2003 with db2 9.1. and 1 dialog instance. presently it is not in HA. We want to change this to HA using MSCS.
    Can any body share some knowledge on this. How to change the existing system.
    thanks alot

    Hi,
    I must want to correct this question as
    " Migrating the enterprise portal from non HA to HA".
    The only option i can see is reinstallation or i mean to say system copy to new HA system.
    Yoy have to plan your connectivity issues in case you are going to change hostname,IP etc.
    Steps:
    1) Install Fresh HA EP system
    2) Take export from source EP system and DB backup
    3) Perform system copy steps on new system
    4) In case host name is changed , inform the respective interfac eowners.
    Hope this will help you to plan better.
    Regards,
    Gagan Deep Kaushal

  • Error when connecting to portal from some machines

    Hi all,
    Can anyone help me with this.
    I get this jserver error when connecting to portal from some
    client machines.
    I works fine from the others. Any ideas?
    This is the error I get:
    [08/01/2002 17:41:57:618 GMT+00:00] page/Timeout occurred,
    label=73 url=http://odeceixe:81/pls/portal30/!
    PORTAL30.wwpro_app_provider.execute_portlet time=15828ms
    [08/01/2002 17:41:57:618 GMT+00:00] page/ContentFetcher
    Unexpected Exception, name=content-fetcher5
    java.io.EOFException: Premature EOF encountered
         at HTTPClient.StreamDemultiplexor.read
    (StreamDemultiplexor.java, Compiled Code)
         at HTTPClient.RespInputStream.read(RespInputStream.java,
    Compiled Code)
         at java.io.InputStream.read(InputStream.java:95)
         at java.io.InputStreamReader.fill
    (InputStreamReader.java:163)
         at java.io.InputStreamReader.read
    (InputStreamReader.java:239)
         at oracle.webdb.page.ContentFetcher.run
    (ContentFetcher.java, Compiled Code)

    Did you ever find the cause of this, I am receiving the same message, but as you said, only when connecting to the portal via a certain pc.

  • Page not found error when accesing Portal from Internet

    Hi,
    I'm getting the following error message when accessing Portal as administrator from the Internet:
    The page cannot be displayed 
    Explanation: There is a problem with the page you are trying to reach and it cannot be displayed.
    Try the following:
    Refresh page: Search for the page again by clicking the Refresh button. The timeout may have occurred due to Internet congestion.
    Check spelling: Check that you typed the Web page address correctly. The address may have been mistyped.
    Access from a link: If there is a link to the page you are looking for, try accessing the page from that link.
    Technical Information (for support personnel)
    Error Code: 500 Internal Server Error. The request was rejected by the HTTP filter. Contact the server administrator. (12217)
    The error message shows in the rightmost area of the browser.
    In the left area I can see the Portal Content
    This happens when using Internet Explorer 6, windows XP, sp2.
    When using MozillaFirefox, the error won't show up, but I don't have full functionality when trying for example to right-click to create Systems in the SystemLandscape window....
    To access Portal from internet, I simply go to http://company.com:50000/irj
    Server side Portal installations is as follows:
    EP7, SP11, windows 2003 64bits.
    Any help will be appreciated.
    Regards.

    Hi Claudio Roca,
    I have encountered the same problem. Do you found the solution for this issue? I will much appreciated if you willing to share your solution and email to [email protected] Thank you so much.
    Regards,
    Hau Chee

  • Which licenses do I need for the Enterprise Portal from Dynamics AX R2 2012

    Dear Community,
    some time ago i heard about the Enterprise Portal, which requires a SharePoint 2013 and a Dynamics AX R2 2012 Server.
    My company has a fully licensed SharePoint 2013 Enterprise Server and enough CALs. We also have a Dynamics AX 2009 Server running. 
    Now to my question: What licenses are needed to get a Enterprise Portal with Dynamics AX 2012?
    Thanks for your responses.
    Sincerely ShareBear9280

    Hi ShareBear,
    According to your description, my understanding is that you want to know which licenses needed for the Enterprise Portal from Dynamics AX 2012 R2.
    There are 4 types of user CALs in Dynamics AX 2012 R2 - Enterprise, Functional, Task, and Self Serve. The number of CALs needed is related to who these users are and what they do.
    More information, please refer to the link:
    http://community.dynamics.com/ax/f/33/t/114710.aspx
    For this issue, I recommend you can post your question to the forum for Microsoft Dynamics AX: 
    http://community.dynamics.com/ax/f/33.aspx .More experts will assist you, then you will get more information relation to Microsoft Dynamics AX.
    Thank you for your understanding and support.
    Thanks,
    Wendy
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Wendy Li
    TechNet Community Support

  • Sharepoint browse portal from AD users issue

    Dear All,
    for my sharepoint 2013, i am able to browse the portal from system admin user with no issue but not for AD users !!
    it keep showing windows security credentials required despite i put the correct credentials,
    what should i do?
    please help

    Hi iwadds,
    According to your description, my understanding is that SharePoint keeps on prompting for authentication.
    I suggest you test with IE and add the site into Trusted Site.
    If you configure proxy server for IE, please try to bypass it.
    http://msdn.microsoft.com/en-us/library/cc750194.aspx
    If this issue still exists, please disable lookback check. You can do as the following blog:
    http://sp-vinod.blogspot.com/2013/03/disable-loop-back-check-in-sharepoint.html
    Best Regards,
    Wendy
    Wendy Li
    TechNet Community Support

  • Issue with Broadcasting and Publish query to Portal from query Designer

    Dear all,
    I have created a standard template ZWT_STANDARD_TEMPLATE in WAD and I have added this for Adhoc Analysis in 'Set Standard Web templated' RSCUSTV27.
    For Broadcasting I have added 0BROADCASTING_TEMPLATE70.
    I have problems with my broadcasting as well as publishing the Query in Portal.
    When I use a Broadcast to Email - it opens a new window with my standard template(ZWT_STANDARD_TEMPLATE ) I have added. No data though.
    Same thing happens for publishing too...When I publish the query to portal from Query Designer or WAD it takes me to the same window with my standard web template. No data though.
    I think both are related to the same issue. Its with broadcasting.
    What is the default template for Broadcasting in NW2004s? Below is the url I have included when I do it from Query designer. Its actually starting the Command - START_BROADCASTER70 but I dont know if it has to do a SOURCE_QUERY=ZCOPA_C03_FAST_PAYABLES. Could anyone compare it with your urls
    http://pgdep00:50000/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex3x?system=SAP_BW&CMD=START_BROADCASTER70&SOURCE_QUERY=ZCOPA_C03_FAST_PAYABLES&START_WIZARD=X&DISTRIBUTION_TYPE=PCD_EXPORT
    This is the url for publishing from WAD
    http://fndef00:50000/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex3x?system=SAP_BW&CMD=START_BROADCASTER70&SOURCE_TEMPLATE=ZWT_FAST_PAYABLES&START_WIZARD=X&DISTRIBUTION_TYPE=PCD_EXPORT
    Any help would be highly appreciated.
    Thanks,
    KK

    Hi KK,
    Did you solve your problem, i am also having the same issue. Please let me know if you have solved this issue.
    Thanks,
    Kumar

  • Help: Upgrade portal from 10.1.2 to 11.1.1.3 Issue

    Hi Experts,
    I have to upgrade my portal from AS 10.1.2 to FMW 11.1.1.3, I was doing so following
    Fusion Middleware Upgrade Guide for Oracle Portal, Forms, Reports, and Discoverer
    According to the guide, an upgrade start point from OAS 10.1.2 to 11g is supported (http://download.oracle.com/docs/cd/E21764_01/upgrade.1111/e10130/upgrade_classic.htm#BABFFIGJ)
    And I installed new 11g middle tier with old portal schema, checked and updated the new oracle home with ua, it's all successful, but in the last step, upgrade portal schema failed, I found below error message from log:
    Portal SQL script started at Wed Jul 27 01:08:32 2011
    Running upg/frwk/popinv.pl### Show errors and warnings
    Step started at Wed Jul 27 01:08:32 2011
    ### ERROR: WWU-01013: Upgrade terminated with the following errors:
    ### 173 : ### ERROR: WWU-00022: Version 10.1.2.0.0 of Oracle Portal/WebDB is not supported
    ### Upgrade aborted at Wed Jul 27 01:08:32 2011
    ### Precheck ended with status :13
    Question1:
    Why 10.1.2.0.0 is not supported, which should be supported according to the doc.
    And according to the doc, even without upgrading the schema, the portal can still be functional in a limited manner, without 11g new feature.
    Question 2:
    In my case, I can not access my portal page by neither http://host:7783/portal/pls/portal(which is old portal address), nor http://host:9001/portal(according to wls console), they return 404 error or just a line reading "PPE is working."
    Am i missing anything when upgrading?
    Thanks for any help.
    Todd

    This restriction is most important for Oracle Portal users. Specifically, if you are using Oracle Portal 10g Release 2 (10.1.2.0.1) Standard Edition One, you must upgrade to Oracle Portal 10g Release 2 (10.1.2.3) before you can upgrade the Oracle Portal schema to Oracle Portal 11g.

  • Upgrading the weblogic portal from 9.2 to 10.3

    Can you please help me on the list of activities to be carried out in upgrading the weblogic portal from 9.2 to 10.3

    If you are currently running Mac OS 9.2.x from your hard drive, you are already doing it. You should be able to download and run the appropriate firmware updater.
    http://docs.info.apple.com/article.html?artnum=86117

  • Upgrading portals from 3.0.9 to portals 10g (9.0.4)

    has any one upgraded portals from 3.0.9 to 9.0.4 lately? i have a few questions about this upgrade process; </p>
    <p>
    the oracle guideline describes that there is a certain script (pobredir.sql) that you run in order to see an output file (typically by the name ... <upgrade_tmp_dir>/uppgrep2.out ).
    this file lists the old and new urls for this upgrade process. are these url's the ones which appear in the user_source only or they appear anywhere in the portals (like in the portal components - pages, forms, etc).
    </p>
    will appreciate any helpful hints.

    classic macgrubers wrote:
    I only want to UPGRADE to 4.0 because I have heard some bad things about 4.0.1, and 4.0.2 closes the easy jailbreaking hole on jailbreakme.com...if I decide to jailbreak in the future.
    And you HAVEN'T heard bad things about 4.0? You haven't been paying attention, then. There as many, if not more complaints about 4.0 compared to 4.0.1 and 4.0.2.
    Is there no way to force it to upgrade to only 4.0? What about putting it in DFU mode, would that help?
    There is no way to upgrade to 4.0 without jailbreaking the phone.

  • How to call portal from R3

    Hello Gurus,
    I have a new requirement to call portal from r3. Its regarding KM. When ever a end user is using R3 Tcode, he will get a button of online user manual about that perticular T-code,,when he clicks on that button ,,he is directed to portal and the PDF of that Tcode opens..
    Now the problem is that,,,,we have maintained SSO,,,it works fine when i login to portal and get the R3 screen,,,,but in reverse way,,,i.e when user calls portal from R3 for manual,,,it asks for password ,,,i don;t know where the problem lies,,,
    We have already pass R3 certificate to portal and portal certificate to R3,,,also maintained profile paramenters,,,,also checked by creating transaction iview,,it works fine from portal to r3 but it is asking password when we go the reverse way ,,,.i.e from r3 to  portal,,,,,kindly help,,,,,

    Hello kalaria,
    Prerequisites for using logon ticket
    u2022     SAP Netweaver Portal and the SAP Systems are in the same domain.
    u2022     SAP Systems registered in the portal
    u2022     User has Administrator roles assigned.
    Export Certificate from Portal
    1. SAP Netweaver Portal     System Administration  System Configuration  Keystore Administration
    2. Go to System Administration  System Configuration  Keystore Administration
    3. Select SAPLogonTicketKeypar-cert from the drop list menu (default)
    4     Choose Download verify.der File button.
    5.     Save file to a folder on your hard drive (i.e. verify.der.zip)
    6.     Extract the zip file and save the verify.der file to the hard drive (i.e. verify.der)
    Create a System user in SAP system with Required Roles
    Check the SAP system for the SAPJSP and required roles
    1.     Enter transaction SU01.
    2.     Choose Enter.
    3.     Enter SAPJSF in the User text field.
    a.     Choose Create button 
    4.     Enter a Last Name in the required Last Name text field.
    Roles
    5.     Choose Roles tab.
    6.     Enter SAP_BC_JSF_COMMUNICATION and SAP_BC_USR_CUA_CLIENT_RFC in the Roles table.
    7.     Choose Save button.
    Logon Data
    8.     If prompted, Enter initial password under Initial password and Repeat password
    9.     Choose Save button
    Hope it help you in connecting SAP ssytem using logon ticket.
    Let me know if you still face the problem.
    Please rewards points if helpful
    Please close the thread if problem solved
    Thankyou,
    Regards
    Vijai

Maybe you are looking for