Dodgy headphone jack behaviour

Running an U410 touch with Windows 8.1
The sound drivers have been giving very off behaviour when using headphones via the 3.5mm jack. Basically vocals and and mid tones are very very washed out (like being underwater). While fiddling around what "corrects" this is sliding either the left or right balance slider to 0% (which makes it weird when using speakers).
I have updated drivers according to the ones linked on the support page. Headphones tested with iPod and are fine.
Any ideas on what is causing it and fixes would be super helpful.
Thanks

hi MoonfireSpam,
Welcome to Lenovo Community Forums!
I suggest try using other Combo jack headsets, ones with Mic and Earphones.
This normally happeneds if the Combo jack is not compatible with the combojack the Lenovo supports.
Hope this helps
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

Another dodgy headphone jack (This time in a Nee

so i've been using my Zen Neeon since Christmas (present) and it's been prety good. That is until now, I've been using the remote with it, and it suddenly stopped working one day, shortly after (maybe a few days) it would cut in and out on the right channel (still using the remote, for extra cable length)So i've figured that the problem is caused when i use the remote (it's the connection bands in the headphone jack for the remote, i'm almost sure) (What do i call htis extra channel? i'll just call it the digital band for now)I get both channels fine when i bypass the remote, and plug in the earphones directly, but it's touchy when i have the remote in... (if it's slightly pressed to one side it sometimes gives me both channels.)
A friend of mine also had a similar problem with his phone (he got a 2.5mmm-3.5mm adapter to listen to music with normal earphones. the problem was he wasn't getting both channels becuase of the extra band... it had a digital band aswell, and was missing out on one channel becuase of the connection...So, now i get to my question.Would you peoples think that the solfering is coming loose inside my machine's headphone jack, or just the digital band, or inside the plug on the remote itself..
I am thinking of getting it warrantied, as i would like to continue using the remote with my Neeon...

...i would think the problem comes in when you plug your headphones into the remote...
...the connection is broken there...
...take it the remote apart...
...play with it a bit...
...if your confident you wont break it...

Another headphone jack prob

I appear tbe having the same problem as everyone else, a dodgy headphone jack that messes uo unless it is kept entirely still (defeats the whole purpose of a portable music player).
But, I'm also having a problem in that the headphones have to be unplugged in order for my player to remain switched off. If they are left plugged in then as soon as you switch the player off it turns back on! A complete waste of battery and just annoying.
Has anyone else had this problem?
I bought the Micro over the i-pod as I'd read such good reviews about it, more fool me!

As per the FAQ post, no-one knows if an updated player has been issued.

Headphone Jack sticking and screen turning on

I bought a sim free palm pre (non plus!) a month or so ago from handtec UK and now the sound intermittently doesnt work. its like the headphone jack is sticking which ive seen is common but when there is no sound the screen randomly turns on like i pressed the unlock button. So i think its a dodgy connection on the slider because when i blow in the slider/headphone jack it fixes it for a bit then it comes back, which is annoying because it drains my battery quicker.
Any ideas?
P.S i spoke to someone on palm live chat and they said to run webos doctor, (i dont think its software tho) but i thought id try it anyway so when i entered the serial number it said its invalid!!!!! Then i discovered theres another sticker underneath the sticker with the imei and serial numbers on the box which says its a movistar phone. When i tried this serial number to download webos doctor it said for movistar and i dont want to use this incase it locks the phone to that network :/
So im stuck as to whether to try and get the phone fixed or see if theres an easy fix but i just dont know what to do
Post relates to: Pre p100ueu (Movistar)
This question was solved.
View Solution.

I think you are correct, I would think it is the headphone jack connector. You can try some compressed air in a can in the jack hole, or maybe a little contact cleaner that has some very light lubricant in it to try and free up the micro switch in the connector. The exercise the switch by quickly inserting and removing the headphone jacks plug. I you do not have any luck wit this process you would be forced to get a repair or replacement.

IMac force select "Display Audio" when headphone jack is in use

I have a new 2012 iMac and Thunderbolt Display. I use the Display Audio from time to time, but also use a set of high quality speakers plugged in to the headphone jack.
Some applications, like Chrome (Google Hangout, Gmail phone calls) will default to using the Display Audio as the speaker. If I have the headphone jack in use (using the desk speakers), then the Audio System Preferences will NOT let me select the "Display Audio" device. It will immediately highlight "Headphone" again. The problem is if I want to change the "Display Audio" volume, I have to remove the cable from the headphone port, then change the audio, then plug it back in the headphone port.
It's quite annoying.
Is there any way to change this?
As a second request, is there an app that allows you to select which audio device applications will use? Like, if I wanted to change Chrome from using the Display Audio (not sure why thats the default anyway), or another application to only use the headphone port...

Hi,
The problem with the selection of the headphone port is something I reported to Apple back in October 2012. After some time, the reply came back that this was intended behaviour, and my bug report was subsequently marked as, "behaves correctly"! I agree with you that this is a pain in the backside and certainly appears to be bug-like behaviour. If you can take the time, I'd ask you to file your own bug report on this matter here. Perhaps it'll help cause a re-think. You should be able to log in with your Apple ID.
As for your second question: many people are asking this now. Rogue Amoeba made such a thing years ago, but it doesn't work on modern, Intel-based Macs. Maybe they'd consider updating it if enough people asked?
For Chrome, you can use ChromeLauncherWithExtraAudio - I've tried it and it works fine, though once you've changed the audio output on launch you have to quit and re-launch to change it again. If you want to choose where to send audio from movies, radio and so forth you could start using VLC, which completely ignores the system audio settings, and lets you choose from any connected audio outputs.
HTH
<Links Edited By Host>

Broken Headphone jack

Hello,
Last Monday, I noticed my ipod touch was broken. The headphone jack would no longer work. The songs were playing but no sound come out through the headphones (tried a few headphones I had lying around).
It became obvious to me that it was a hardware issue when I restored the ipod firmware. Besides, when i slightly moved the headphone jack out of its port i could heard sound through one of the channels.
I ordered the replacement box through support's site. However, the ipod returned to normal functioning on the following day, when I upgraded to 1.1.4. However this morning it happened again, and again this afternoon the ipod turned back to normal behaviour.
I will send it back to Apple on Monday however I'm afraid the tech stuff won't be able to reproduce the problem, since it's quite random as I have explained.
What should I do? attach a note inside the ipod box?
Call support even though phone support has expired (past the 90 free days)?
thanks
Ps. I'm in Spain so going to a genius bar is not an option

Just great ¬_¬
They received the iPod today and after just 1 hour they claim "no trouble found" and reshipped it back to me. Now i'm trying to get hold of tech services to let them know (Again) about the random nature of the issue

Anyone got an idea how much replacing headphone jack costs at Apple Store

My 1st Gen - (actually a replacement for a dodgy one) is out of warranty and the headphone jack is playing up. Anyone got a guide price for what they would charge me at Apple Store - Im not happy this had happened, but I know the realities of warranties. I own a Dyson!

Luvlabs is correct; Apple charges a flat price for out-of-warranty repair (actually it will be a replacement, probably with a refurbished unit) regardless of the problem with the iPod. Apple's repair pricing can be found here:
http://www.apple.com/support/ipod/service/prices/
There are independent service providers that may be able to offer a lower price for the repair. I can't make any recommendations, but if you search the web for "ipod repair" you should find a number of options, and someone else here may be able to recommend a service provider.
Regards.

Help! red light from headphone jack and strange sound issues!

Help! I use my baby for listening to music and watching DVDs almost constantly when I'm working, and just the other day it started doing something really odd whenever I start doing something that involves sound!
If I'm listening to a song, watching a DVD, playing a game, whatever, as long as it involves sound it does this. What happens is, it'll be fine for up to a minute, and then it starts making this staticky skipping noise and losing the tracking on whatever it is I'm doing (game, song, DVD, etc.). This happens whether I've got headphones or speakers plugged in, or I'm using the laptop speakers. Also, a red light flashes from INSIDE the headphone jack with every staticky noise.
Everything else works fine. The problem doesn't appear as long as I'm not doing anything using sound, and it goes away about a minute after I stop using sound when it appears. It just started doing this yesterday, which was an entirely uneventful day and no different from normal. I traveled, but the laptop stayed in its case the whole time and didn't get dropped or jostled or anything.
I depend on my music to keep me sane! I can use my iPod for now, but I've got finals coming up and I need to use music while I study! HELP!

if the red light is flashing at the output, it means that the computer is trying to output a digital optical signal.. which would explain why your audio is cutting in and out, cos it's flipping randomly between digital out and built in speaker, which means the speaker is being intermittently muted.
the reason for this is that the sensor in your audio output port is dodgy. this sensor is supposed to detect when you have a digital optical cable connected, and yours seems to just be going a bit nuts. fraid the only way to get it properly sorted is to take it in for a service.

Loose Connection Headphone Jack MacBook

I was having difficulty with 3 pairs of headphones that I own. Upon insertion into the MacBook aluminum headphone jack, I would only get a very loose connection. A slight wiggle would disconnect headphone sound and revert to internal speakers.
I went to the Apple store today in Toronto, and tested a few of their units on display. Same thing I even tested using the headphones sold at the store (BOSE noise canceling - $249.00). Same problem. Just pulling out ever so slightly, ruined the connection...
Anyone else had this problem?? I'm totally surprised there's not more about this out there...

I reported the problem within two weeks of receiving the first macbook and then within a week of receiving the second - apple has a period of "remorse" whereby if you decide you are not happy with your purchase you can return it less a restocking fee - in my case, since it was a clear failing of the machine, they waived the restocking fee and gave me a full refund
I should add that I bought mine from the online apple store - the support and sales staff were very helpful - the video that I put online made it crystal clear what the problem was
before deciding whether to take a third macbook or the full refund I asked them to check with the technical department whether this was a known issue (it wasn't) and I also made a trip to a local reseller to see if I'd just had bad luck or it was a widespread problem (all the unibody macbooks and macbook pros exhibited the same behaviour)
I had been waiting to upgrade to a smaller form macbook that I had long hoped for. The release of the unibody macbook seemed initially to be the answer to these hopes - albeit with no firewire and a poorer quality screen than I expected. I decided I could live with these shortcomings but the macbook as it stands is unusable for me due to this headphone socket issue. Rather than wait for a fix to this unrecognised issue I decided to buy a previous revision macbook pro. Better a last revision mac product than a first revision - pity because otherwise the new macbook was great.

ITunes no longer keeps speakers running on headphone jack

iTunes no longer keeps my external speakers running when connected by audio cable to the headphones jack. After 1:45 min:sec, my Logitech Pure-Fi Anywhere 2 speakers power down when connected to my computer playing iTunes.
The speakers do not power down for audio generated from other sources on my computer. When I play a video or audio file through Safari or another browser, the speakers work fine. When I listen to an audio file by selecting it in the Finder using Apple-Y ("quick-view"), the speakers run continuously until the end of the track without powering down. When I use the speakers configured the same way with other software (such as Skype), they work fine.
The speakers do not power down for audio generated from other DEVICES. When I plug the speaker cable into the headphone jack of either my iPhone 3Gs or my partner's mp3 player and play audio, the speakers work continuously.
I've looked at trouble-shooting for iTunes and found nothing on the Apple site or the web or in the iTunes preferences to keeping wire external speakers live during iTunes playback. I've tried having the speakers connected to a power source or running on batteries but the problem is the same. I've reset the speaker device with no change. I've reinstalled iTunes, no change. The Apple Store genius bar cleared all caches and restarted, no change. They reinstalled the computer system, but found no change.

Hi Dexterdawg
Can you direct me to the thread as I can not sort out the same problem on my iMac
Thanks

Headphone Jack No Longer Works

Does anyone know of headphones that may plug into the bottom outlet of the iPod, where it connects usually to stereo equipment. My iPod still works with this connection, to charge it, to listen on my computer, on my stereo but the headphone jack no longer works so I can't use it in my car or at other times.

Ok I just talked to headroom and with this adapter you can go directly to a set of headphones or to one of their amps. Additionally the pin connector provides improved sound quality over the cheap headphone jack that comes stock on the ipod.
http://tinyurl.com/272myv

IPhone 4 headphone jack not working right.

So the headphone jack in my iPhone 4 i don't think is working properly. The right headphone does not put as much sound out as the left. I'm not sure why it was working perfectly just yesterday. I haven't dropped it or got water in it or anything. I tried plugging it in and unplugging it a few times, i reset my phone, turned it off then on and nothing seems to be working. Its not on silent and the volume thing is centered. Idk what could e happening. Help!!!

I would test the headset in another device such as a computer
and test another 3.5mm minijack headset in the phone to tell if it's the phone or headset

How do i use the headphone jack as an input on a macbook pro 9,2.... the option just isn't in the sound app.

how do i use the headphone jack as an input on a macbook pro 9,2.... the option just isn't in the sound app.
all i have is the internal mic option, can anyone help?
thanks

You should also ask this in the MacBook Pro forum. This is the forum for the white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
https://discussions.apple.com/community/notebooks/macbook_pro

Is there a way to disable the headphone jack?

A few months ago my macbook pro 2012 (non retina) fell and the headphone jack was destroyed in the process, and the sound on my internal speakers no longer work. The apple genius said that the only way to get my headphones and speakers working again would be to replace the logic board. What I'm wondering is if there's a command to type into the terminal that would just bypass the headphone jack entirely so that I could at least get sound through my speakers. Like I said, there's no hope of saving my headphone jack so I don't need advice about how to re-enable it. I'm hoping for a command for terminal to disable the headphone jack so that I can hear sound through my internal speakers. Help?

Well you have to take a break, sleep, etc sometime! The repair may take just a few minutes.
Your other option would be search on the Fixit website and YouTube's "how to tutorials."

Is it possible to use a cable with two headphone jacks on either end and an electric guitar adapter to record in Garageband?

Hey everyone,
I got my Macbook Air (Mid 2013 model) last month and I want to record my acoustic-electric guitar on Garageband (which came with the Air).
I don't want to buy a guitar that has a USB. I have a cable with a 3.5 mm headphone jack on both ends like the one pictured here on this website http://www.bestdealaz.com/item.php?id=628 (i didn't buy it from this site though).
I connected a 6.3 mm guitar adapter (http://www.ebay.com/bhp/headphone-guitar-adapter) to this cable. Then I connected one end of the cable to my guitar and the other end to the Headphone/Microphone jack on the left side of the MBA.
I saw how other people were saying to go to System Preferences / Sound and then change audio output to audio input.
I can't do that. I tried.
Please help!
Thank you.

Hello Massimo Pascucci,
The issue that you are facing when creating an endpoint with internal loadbalancer is the limitation of not allowing same ports to be listening under a single cloud service. This reason for this is that there is a limitation of only one private IP (Also
known as the Internal load balanced IP) per cloud service.
There is also a limitation on the Internal load balancer more than one port to be published per load balancer:
You can leave your feedback by following the link below:
https://social.msdn.microsoft.com/Forums/en-US/1805c5a0-3906-4cd6-8561-9802d77e0ae5/is-it-possible-to-use-both-an-ilb-and-an-elb-listening-on-the-same-port-in-the-same-azure-cloud?forum=WAVirtualMachinesVirtualNetwork
Refer to this article for more information on Internal load balancer:
http://azure.microsoft.com/blog/2014/05/20/internal-load-balancing/
Thanks,
Syed Irfan Hussain

Dodgy headphone jack behaviour

Similar Messages

Maybe you are looking for