Does anyone have any idea?
ok last night i plugged my ipod in and let it charge while i watched a movie. When it had fully charged i disconnected it from the apple power plug thing. Later that night i went to turn it on and it said there was no battery power even though the bar at the top was full. Today i plugged it in again and as soon as i did it says it was charged. Then i plugged it into my computer for 4 hours and it just said very low battery please wait. I then plugged it back into the apple power plug thing and it still syas its fully charged. I have tried to reset it but thta does nothing. It is only about 4 months old. its an 80 gb video. The battery dies as soon as i try to play a song. please help what is wrong? pleeeeaaaase!!!!!!!!
Hi all,
I hope someone can help cos I'm out of ideas.
I've got 2 dilemnas
I bought a new ipod today. How can I get the tunes off my old one and onto my new one.
Second problem which makes things complicated - we have a new laptop and the itunes library for Ipod no 1 has been deleted - so all I have is the actual tunes on my ipod. So what I need is to get these tunes off into a library.
Then I need this library so I can transfer over to my second Ipod.
Can anyone help?
Sorry it's so complicated!
Thanks
Donna xx
Similar Messages
-
I have a new Mac Mini and I found AdWare called TakeOverSearchAssetsMac and SearchProjects on it. I have been unable to remove it. Does anyone have any ideas on how to remedy this?
Please review the options below to determine which method is best to remove the Adware installed on your computer.
The Easy, safe, effective method:
http://www.adwaremedic.com/index.php
If you are comfortable doing manual file removals use the somewhat more difficult method:
http://support.apple.com/en-us/HT203987
Also read the articles below to be more prepared for the next time there is an issue on your computer.
https://discussions.apple.com/docs/DOC-7471
https://discussions.apple.com/docs/DOC-8071 -
My MacBook Pro (2010) is runnign very slow. This came on all of a sudden. It opens, closes, reboots, etc., all much slower than ever before. I have used the repair disk permissions without any positive result. Does anyone have any ideas?
First, back up all data immediately, as your boot drive might be failing.
Take these steps when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
You must be logged in as an administrator to carry out this step.
Launch the Console application in the same way as above. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Post the 50 or so most recent messages in the log — the text, please, not a screenshot.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into a message.
Important: Some personal information, such as your name, may appear in the log. Edit it out before posting. -
I have installed a trial of Adobe illustrator on my macbook pro. It is the 2014 release of adobe illustrator. I want to trace an image using the custom trace button.
I start a new document. Then I place my scanned pencil/colored pencil drawing, in to the document. I have tried scanning and then placing it as a jpeg, bitmap, and tiff file. I have tried scanning and then placing it, in color and in black and white. The scan mode I use is flatbed. Adobe illustrator allows me to select the default button and one of eleven preset buttons (e.g high fidelity photo), but it does not allow me to click the custom trace button. The custom trace button is grey while all the other buttons are white.
Does anyone have any ideas how I could custom trace?It seems pointless to adjust it afterwards because it is then only a couple a pencil lines rather then a full drawing. And how do I adjust it afterwards? Would I do this using the different buttons under the window button?
-
Is there any way of exporting a clip (example 1 hour) into 4 seperate 15 min clips at the same time? Or does anyone have any ideas along the same lines to save time? Add my skype baconhousevidz if you can help or are unsure of what im asking
thanks everyoneBaconHouseVidz wrote:
… at the same time…
in hope to speed things up?
no, no effect. -
I have tried 6 times to download itunes on my 64bit lap top. I keep getting error messages, and I have disabled the pop up blockers still nothing. Does anyone have any ideas?
What do the error messages say? (Precise text, please.)
-
I am using Logic Pro 9 with two MXL 990 microphones in my piano and a Rode NT1A for vocals. I have tried recording with added reverb and keeping getting not a natural reverb sound, but a rather "pixilated" one that does not sound natural. Does anyone have any ideas on how to solve this issue? I have tried using Silververb and Space Designer, and both result in the same problems. Thank you!
This is asking for the impossible! It does not sound natural because maybe it isn't and in judging so whats your reference anyway. If you are in dire need of some natural sounding room you can go and record it yourself. But even then, the chances that it sounds like you imagined it, are very slim.
There are very decent sounding reverberation plugins, based on artificial reverb generators or convolution-style, the last one is said to sound more 'natural' then the first one. Be it as it maybe, it really is like cooking food. You got all the ingredients for this delicious taste at hand and believe it or not to reach a satisfying result this is not enough, because if you do not mix the ingredients in the right proportion you will end up with a different dish you thought you'll get. This is exactly the same when one would mix audio, I dare say.
So treat yourself to some good ingredients and the rest is up to you, namely: taste and experience!
And looking at some of my past music productions I always find the same plugins for the 'ambient' task:
Altiverb by Audio Ease when I have acoustic ensembles (classical music mostly), the Sony Oxford Reverb in studio productions, Bricasti when I have to deal with drums and MMultiBandReverb from MeldaProduction for all-round stuff. Thats the base I start from, after that I can end up with dozen Reverb plugins which basically all are doing the same thing but just in a tiny different way. -
I cannot install iTunes updates as of today. Does anyone have any idea what changed with iTunes?
The question apparently needs to be typed in twice... good work. Here it is again:
I cannot install iTunes updates as of today. Does anyone have any idea what changed with iTunes?Is this a distinct issue from the 42404?
If so, are you getting an error message when you try to install iTunes? If so, what does it say? (Precise text, please.) -
? I get an Error msg when syncing ipad "The disk could not be read from or written to" when loading photos. Does anyone have any idea how to fix?
You have posted in the Mac forum for problems & questions usting the iTunes store. You will probably find more help in the following forum.
http://discussions.apple.com/forum.jspa?forumID=800 -
I've tried to d/l itunes 3 times and every time I get this message: .....Downloads\iTunesSetup.exe.part could not be saved, because the source file could not be read. I have no idea what I'm doing. Does anyone have any ideas to help? Cheers.
I've tried to d/l itunes 3 times and every time I get this message: .....Downloads\iTunesSetup.exe.part could not be saved, because the source file could not be read. I have no idea what I'm doing. Does anyone have any ideas to help? Cheers.
-
Does anyone have any idea how to find out the version of weblogic plugin
Does anyone have any idea about how to find out the current version of weblogic plugin used to connect from webserver to weblogic server?
I could not find version in plugin directory.
it's the same one that came prepackaged with Weblogic 9.2. we haven't change it.
Sun One 6.1 SP6
Weblogic 9.2
Solaris 5.10
Edited by: 985608 on 01-feb-2013 8:20
Edited by: 985608 on 04-feb-2013 6:25
Edited by: 985608 on 04-feb-2013 6:27Hi,
You can find version of weblogic plugin using below command.
strings <plugin module file> | grep -i wlsplugins
Mark if this helps.
Regards,
Kishore -
My Mac has suddenly stopped playing my DVDs including a DVD it played fine only 3 days ago. I insert the DVD and wait for the player to start automatically but after 10 minutes, nothing is happening and it sounds like the disk has stopped spinning. I've now tried with four different DVDs (all store bought and so perfectly normal disks). The Mac doesn't eject the disk or anything it just doesn't seem to respond to it being there at all.
My main confusion is why this suddenly happened today when it was perfectly fine last week.
Does anyone have any idea what could be wrong and how I could fix it? Thank you.
JinxeWelcome to the Apple Support Communities
See "The drive accepts discs but they do not mount or are automatically ejected" > http://support.apple.com/kb/HT2801 -
Time Machine will not let me restore from backups after June, 2013. I can see the files on the external hard drive but Time Machine skips all of them and goes back to June, 2013. Does anyone have any idea what the problem is?
rtilghman wrote:
telling me to buy a new router is NOT a solution.
And why not? Apple is selling these things like BigMacs. They can't make enough of them. You've been suffering since May because you refuse to get a decent router.
Can you imagine if a company that makes a refrigerator told me that I needed to upgrade my electrical system to rectify a problem with their device? What kind of response IS that?!?!
What if the problem with their device is that it requires a new-fangled "grounded" outlet and your circa 1890 house doesn't have grounded outlets. Would you refuse to purchase a $ 25 adapter on principle? -
I've been working on our church website and all of a sudden this week, my computer will not connect to the site. I keep getting a message saying that the the connection to the server was reset while the page was loading. Does anyone have any ideas of how I can fix this?
The "The connection was reset" error message can be caused by a bug fix for the BEAST (Browser Exploit Against SSL/TLS) attack that the server doesn't handle.
*[[/questions/918127]]
*[[/questions/918028]] -
Hi, my facebook app on my Ipad3 has stopped allowing me to put comments on. Does anyone have any ideas how to correct this? Don't know if it is a problem with the Ipad or just the facebook app. Thanks.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
I saw one post where a user said dust got inside the small microphone hole. Using a vacuum cleaner removed the dust and restored the audio.
Cheers, Tom -
I am trying to enter the No. Of my VISA card (which I normaly use for payments) in the billing info of my account and it is not accepted. Does anyone have any idea why?
JarleEkanger wrote:
How about this? Use Delete array subset to extract chunks for averaging, and a shift register to retain the remaining array.
It is typically not advisable to use "delete from array" in a tight loop. The constant memory reallocations due to array resizing are probably inefficient.
Here's one simple way to do it..
(If the number of points is not divisible by 10, the excess tail is discarded. You can easily modify that behavior if desired.)
LabVIEW Champion . Do more with less code and in less time .
Attachments:
averages of 10.png 5 KB
averages of 10.vi 9 KB
Maybe you are looking for
-
Java.lang.NoSuchFieldError: ADFM_SINGLE_DC_FRAME Error While Running a Page
Hi I am having a simple JSF Page when i try to run the page in Jdev 11g i am getting the following exception JSF Page Code: <?xml version='1.0' encoding='UTF-8'?> <jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1" xmlns:f="htt
-
Service entry sheet - GR quantity is more than confirmed quantity
We have a service based PO with Acct assignment F and Item category D. We have ticked Goods receipt in delievery tab. We have ticked 1) invoivce receipt and 2) GR-based IV. ( S-based IV is not ticked) There is no purchase order history. While making
-
Currently my os is windows 7. I have created a form using acrobat 9 pro and when I test the submit button instead of opening up the email it asks me to save the form. Before my os was switched I wasn't having this problem. Can anyone tell what the
-
Help with a flash html inserting into DW
Hello, I have created a enquiry section in flash for one of my html DW pages for my site. When I publish the flash doc ti creates a html page (Contact.html). When I open the flash html page in DW or upload it to my server, everything works fine. I re
-
XMII query against a SAP NetWeaver database
Hi all, I have set up a data server for a SAP NetWeaver MSSQL database (DX1 on SAPSRV03) for SAP Web AS 6.40. The status of this data source shows OK. I try to create a new query template. In the SQL Query details, I can see the list of the tables an