Does application data also figure into the orange other catigory?

I have ten app installed on my 8gb ipod touch, 1 photo and 3.80gb worth of songs on the ipod. The app green data shows up at 92.8mb. I just what to make sure the 200.3mb of other data is being used in some useful way and that I'm not losing any extra space.
Thanks

Everyones has between 200 and 400.
There is nothing wrong.

Similar Messages

My ipod shuffle is showing up when plugged into my computer. Also, isn't the orange light suppose to stay on until charged. Mine lights orange for a minute and then goes off.

my ipod shuffle is showing up when plugged into my computer. Also, isn't the orange light suppose to stay on until charged. Mine lights orange for a minute and then goes off and also it wont be recongnize by my computer .please help

I'm having the same problem. I'm using a new shuffle usb cable in my 2nd generation shuffle and nothing shows up on computer. I'm wondering if the dock for the second gen is different than the new usb cable direct into the 2nd gen shuffle. I don't have a dock for it. Before I buy one on ebay I hope someone can assist.

How come F10 does not put my clip into the timeline ?

How come F10 does not put my clip into the timeline ?
When I pressed F10, the sound icon appears instead.
Am I missing out something ?
Thanks

skalicki` wrote:
Technically, to make the function keys work you don't need to change the second box to dash. I don't know why I gave that advice, but it isn't necessary. I guess I said that simply because that's what I have it set to.
The reason there are two boxes is so that you can set Exposé to using both the function keys and the mouse. For example, if I have +All Windows+ set to F9 and Secondary Mouse Button, then it will show all open windows if I click F9 or right-click. That is why you actually don't need to have the second boxes for any of these set to dashes. You could set them to your mouse buttons, or if you wanted you could set the first box of any of these to any function key, as long as it isn't set to the same one as the key you want to use for your shortcuts within FCE.
I hope this made sense, I realize that I might not have explained it very clearly.
Message was edited by: skalicki`
Thanks skalicki, I think I got it. You've been of great help !!

So my iphone 4 cracked on the back. its a pretty big crack and it also chipped into the iphone itself near the area you plug the charger in from. it wont work unless its on charge, otherwise it'll turn off completely after i unplug it. need anawers thanks

so my iphone has a really big crack on the back and it has also chipped into the iphone itself near the area you plug the charger into. my iphoe will not turn on unless it is connected to the charger, when i discopnnect the charger the whole screen will go blank. i need answers. can this issue be fixed or would i need to replace it? thanks! (the front screen is not cracked at al)

Some Apple Stores in the USA offer to replace the back of the phone. All others have to get serviced by Apple and will be replaced if you pay the service fee:
Apple - Support - Service Answer Center
Out-of-Warranty Service
If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service fee listed below.
iPhone model
Out-of-Warranty Service
iPhone 5s, iPhone 5c,
iPhone 5
$269
iPhone 4S
$199
iPhone 4, iPhone 3GS,
iPhone 3G, Original iPhone
$149

Does migrating data erase it from the source computer?

Does migrating data erase it from the source computer?

no, its in both locations
http://support.apple.com/kb/ht4889

My ipod touch do not figure into the list on Itunes what di i do?

My ipod touch do not figure into the list on Itunes what di i do?

Try:
iOS: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

My new ipod touch does no let me sign into the app store. What do I do?

My new ipod touch does not let me sign into the app store. What do I do?

What exactly happens when you try?
Maybe:
Can't connect to the iTunes Store

How can print the data from notepad into the web application.

Hi,
I am Buntty, I want to read the data from the notepad and print into text area of web application, I have written the code to invoke the file and store data in temporary buffer, then I want to Print that data, but while printing the data 1st line replaces when the 2nd line prints, java code is below.
BufferedReader bin=new BufferedReader(new FileReader("mydata.txt"));
while((credit_number=bin.readLine())!=null)
selenium.type("inputString", credit_number);
Please help me to print all the lines in the text area of web application.
Any method to print the all the data in the notepad at a time into the text area on web application.
Thanks
Buntty
Edited by: Buntty on Nov 15, 2008 4:24 PM
Edited by: Buntty on Nov 15, 2008 4:37 PM

Try this:
BufferedReader bin=new BufferedReader(new FileReader("mydata.txt"));
String tempString = "";
while((credit_number=bin.readLine())!=null)
tempString = tempString + credit_number;
selenium.type("inputString", tempString); Hope this helps.
All the best

Why does not the data get saved into the Database

Please check if there is any thing wrong with my code here. Why cant i save the data in to my database. when i used the same things in other places it works.
guys i have copied a portion of the code here. right now i have commented few areas to not give me any errors on the whole program
Please check why cant i save the data into the database.
i have created a seperate class for database connection Utilities
void saveData()
               //Utilities ut = new Utilities();
               //connection = ut.getConnection();
               //ResultSet resultSet;
          // JourneyID = ut.getResults(qryJourneyID);
               strJourneyID = txtJourneyID.getText();
               System.out.println("++++++++++++++++++++++++"+strJourneyID);
               strVehicleID = (String)comboVehicleID.getSelectedItem();
               System.out.println("++++++++++++++++++++++++"+strVehicleID);
               strDriverID = (String)comboDvrID.getSelectedItem();
               System.out.println("++++++++++++++++++++++++"+strDriverID);
               strStartDateTime = txtDateTime.getText();
               System.out.println("++++++++++++++++++++++++"+strStartDateTime);
               int a = JOptionPane.showConfirmDialog (null, "Are u sure you want to save the changes?", "WARNING!", JOptionPane.YES_NO_OPTION, JOptionPane.QUESTION_MESSAGE);
                    if (a == 0)
                         if(NEW)// new is a boolean value
                              //ADDING NEW DATA STATMENT
                              System.out.println("INSERTING NEW ROW IN THE TABLE...");
                              try
                                   String insert ="INSERT INTO Job VALUES (" + "'" + strJourneyID + "'"+
                                   ", '"+ strVehicleID +     "',"
                                   +"'"+ strDriverID +"',"
                                   + "'"+ strStartDateTime +"')";
                                   System.out.println("STATEMENT IS " + insert);
//                                   InsertStmt = connection.createStatement();
//                                   InsertStmt.executeUpdate(insert);
                                   JOptionPane.showMessageDialog(null, "You data has been successfully saved.","TIS: Operation completed", JOptionPane.INFORMATION_MESSAGE);
                              catch (Exception e)
                                   e.printStackTrace();
                                   JOptionPane.showMessageDialog(null, "Problem encountered while adding new data");
                         else
                              JOptionPane.showMessageDialog(null, "it is supposed to save data");
                              /*try
                                   String ChangeRecord = "UPDATE Job SET " +
                                   "JourneyID = '" + strJourneyID+ "'"+
                                   "VehicleID = '" + strVehicleID+"',"+
                                   "DriverID = '"+strDriverID+"'," +
                                   "StartDateTime='" + strStartDateTime+ "'";//syntax error???
                                   System.out.println(""+ ChangeRecord);
                                   UpdateStmt = connection.createStatement();//just added
                                   UpdateStmt.executeUpdate(ChangeRecord);
                                   JOptionPane.showMessageDialog(null, "You data has been successfully saved.","TIS: Operation completed", JOptionPane.INFORMATION_MESSAGE);
                              catch (Exception change_exception)
                                   change_exception.printStackTrace();
                                   JOptionPane.showMessageDialog (null, "Problem encountered while updating","TIS: Problem encountered",JOptionPane.ERROR_MESSAGE);
                    else
                         JOptionPane.showMessageDialog(null, "You chose to cancel the operation","Operation cancelled", JOptionPane.INFORMATION_MESSAGE);
                    }

Yes you have commented all the code that update the
database so how can it update the database.
By the way for inserting dont use Statement use
PrepairedStatement
by the way next time please post codes in code tagsMan i have commented it becaues it if i dont comment it givens me errors. like cannot find variable and i dont understand how to use the code button. whereever i click the code button it displays the at the end of the code! what to do?
connection = ut.getConnection();
ResultSet resultSet;
UpdateStmt = connection.createStatement();
UpdateStmt = connection.createStatement();
UpdateStmt.executeUpdate(ChangeRecord);
please check it once again
void saveData()
               Utilities ut = new Utilities();
               connection = ut.getConnection();
               ResultSet resultSet;
          // JourneyID = ut.getResults(qryJourneyID);
               strJourneyID = txtJourneyID.getText();
               System.out.println("++++++++++++++++++++++++"+strJourneyID);
               strVehicleID = (String)comboVehicleID.getSelectedItem();
               System.out.println("++++++++++++++++++++++++"+strVehicleID);
               strDriverID = (String)comboDvrID.getSelectedItem();
               System.out.println("++++++++++++++++++++++++"+strDriverID);
               strStartDateTime = txtDateTime.getText();
               System.out.println("++++++++++++++++++++++++"+strStartDateTime);
int a = JOptionPane.showConfirmDialog (null, "Are u sure you want to save the changes?", "WARNING!", JOptionPane.YES_NO_OPTION, JOptionPane.QUESTION_MESSAGE);
                    if (a == 0)
                         if(NEW)
                              //ADDING NEW DATA STATMENT
                              System.out.println("INSERTING NEW ROW IN THE TABLE...");
                              try
                                   String insert ="INSERT INTO Job VALUES (" + "'" + strJourneyID + "'"+
                                   ", '"+ strVehicleID +     "',"
                                   +"'"+ strDriverID +"',"
                                   + "'"+ strStartDateTime +"')";
                                   System.out.println("STATEMENT IS " + insert);
//                                   InsertStmt = connection.createStatement();
//                                   InsertStmt.executeUpdate(insert);
                                   JOptionPane.showMessageDialog(null, "You data has been successfully saved.","TIS: Operation completed", JOptionPane.INFORMATION_MESSAGE);
                              catch (Exception e)
                                   e.printStackTrace();
                                   JOptionPane.showMessageDialog(null, "Problem encountered while adding new data");
                         else
                              JOptionPane.showMessageDialog(null, "it is supposed to save data");
                              try
                                   String ChangeRecord = "UPDATE Job SET " +
                                   "JourneyID = '" + strJourneyID+ "'"+
                                   "VehicleID = '" + strVehicleID+"',"+
                                   "DriverID = '"+strDriverID+"'," +
                                   "StartDateTime='" + strStartDateTime+ "'";//syntax error???
                                   System.out.println(""+ ChangeRecord);
                                   UpdateStmt = connection.createStatement();//just added
                                   UpdateStmt.executeUpdate(ChangeRecord);
                                   JOptionPane.showMessageDialog(null, "You data has been successfully saved.","TIS: Operation completed", JOptionPane.INFORMATION_MESSAGE);
                              catch (Exception change_exception)
                                   change_exception.printStackTrace();
                                   JOptionPane.showMessageDialog (null, "Problem encountered while updating","TIS: Problem encountered",JOptionPane.ERROR_MESSAGE);
                    else
                         JOptionPane.showMessageDialog(null, "You chose to cancel the operation","Operation cancelled", JOptionPane.INFORMATION_MESSAGE);
                    }

Doubt in inserting Date and time into the table

Hi i have created a table with two columns "Order_ID" and "Order_date" as
create table test
order_id integer,
order_date date default sysdate
Now i insert one row as
insert into test(order_id) values(1);
now i get the output as
ORDER_ID ORDER_DAT
1 05-JUN-12
But i need to insert the current system time also into the Order_date column.
How can i achieve this ???

it works OK for me!
bcm@bcm-laptop:~$ sqlplus user2/user2
SQL*Plus: Release 11.2.0.1.0 Production on Mon Jun 4 20:19:57 2012
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
20:19:58 SQL> @test1
20:20:01 SQL> create table test1
20:20:01   2 (
20:20:01   3 order_id integer,
20:20:01   4 order_date date default sysdate
20:20:01   5 );
Table created.
20:20:01 SQL>
20:20:01 SQL> insert into test1(order_id) values(1);
1 row created.
20:20:01 SQL> select * from test1;
ORDER_ID ORDER_DATE
      1 2012-06-04 20:20:01
20:20:01 SQL>

How to sort a column directly after data is filled into the grid?

Hello,
I have a unbound field X, which is filled on fly in the RowLoaded2 column. If I click on the column header, I am able to sort the column.
I want to sort the column directly, but all attempts have failed.
I have tried to call in <anchor>_OnUpdate
<anchor>.bcol.Sort( "X", "ASC") but it does not work as long as the property is not mapped to a Segment field of a bdoc. For this test i just created my property X on the Business Objects behind the tablegrid
I have used <tablegridcontrol>.sortCol = 2, but it results into a StackOverflowException even for any other column.
Is there no way to sort the colum in this special kind of situation?
Regards,
Andreas

Hi,
you have to consider that when loading a tile for the first time always rowloaded2 is fired (several times) and afterwards onload. Maybe rowloaded2 again afterwards. So it should work to sort in onload.
But when clicking the <back> button in the menue the order of the fired events might be different!
Do you want to sort by an unbound column which is readonly or is it also editable (see other thread)? In this case things might be much more complicate... Normally another sorting should be done in onsave event but unfortunately you don't save anything as it is unbound...
Regards,
Wolfhard

How can I import data using .dmp into the table which has more columns then in import

I am building the history for warehouse purpose on Oracle 8i database and want to use the old import (.dmp) files (from oracle 7.3.4) to import data but the underlying table is having few more columns which are not in my old DMP file .. how can I import the data into these altered tables while using the same *.imp files .
Any solutions ?

That is the most obvious solution .. but think of the case when my operational database which is the source of my data is undergoing changes every quarter i.e after every 3 months there are some changes on underlying table structures which means structures of my import files will always be different after evry quarter .. you can imagine the number of temporary import structures I need to create .. can't there be a solution wherein I can write an SQL over the import file to read the data in required format ..

What does Application failed codesign verification. The signature was invalid, contains disallowed?

I was wondering someone could help me.
I'm already to upload my App, I thought I followed all the instructions and now in Application Loader it's throwing this error
"Application failed codesign vertification. The signature was invalid, contains disallowed entitlements, or it was not signed with an iPhone Distribution Certificate."
What does that mean and how can I fix it??
Thanks,
Michelle

Hi, I'm not sure which Adobe Forum you would need, but I don't think it's the Flash Player Forum. Go here to find the other Forums that may be helpful to you.
Use the drop down arrow at "Select Forum" http://forums.adobe.com/index.jspa
Thanks,
eidnolb

How to Load Master data text Description into the Data Target?

Hi,
I have a Master data which is an ID, and the description for that ID is added as text description along with the master data.
The datasource is a flat file load, which has both the fields i.e. ID as well as the description along with many other fields.
I need to load the flat file without changing it, into the ODS.
Please suggest a way to load the description of the ID along with the ID into the ODS, and then further into the CUBE.
This description field should be available, while checking the contents of the ODS as well as the CUBE.

hi Srinivas,
Thanks for the quick response.
I actually have the flat file with the description within it.
I cannot make any changes to the flat file.
So, please suggest me accordingly.

When I plug my iPhone into my computer it doesn't show up at all. Not on the computer or iTunes nor does it charge when plugged into the computer. It charges just fine when it's plugged into the wall .

When I plug my phone into the computer nothing happens. The phone doesn't respond the computer doesn't show anything and ITunes doesn't show anything!

I would not worry too much about the charging aspect of the computer connection for now. I did notice that the last time I connected my iPhone to my computer the iTunes had changed and the only way I could determine that my iPhone was connected was by noticing a box at the upper right on the computer screen vs. the older graphical interface which showed the connected iPhone in a column on the left of screen. My iPhone did not turn on and did not charge. However the iPhone was connected and I could in-fact select Sync from one of the iTunes pull-down menus. Again, for quite some time I though my iPhone was not triggering the computer at all when I connected it. I use an iMac.

Does application data also figure into the orange other catigory?

Similar Messages

Maybe you are looking for