Does creating a component definition in UI write to tables or schema ?

When I create a custom component in the UI in Enterprises > Component Definitions - let's say a Workflow Monitor Agent - and I activate it, I understand it will update the enterprise gateway store (siebns.dat). Will this also write to any tables in the database or update the siebel schema in any way?
We are in the middle of an upgrade from 8.1.1.3 SEA to 8.1.1.9 SIA. Currently our application stack is at release 8.1.1.9 SIA GA but our repository is still at 8.1.1.3 SEA. We want to create the header custom component definitions in the application UI to match what is in Dev to prepare for a cfgmerge after the upgphys is completed. Our concern is the risk of doing this while the app tier is not at the same release level as the repository. If we are only dealing with updates to the siebns.dat then I think we should be ok, and the cfgmerge will take care of it. But if we are writing to tables when I create these custom components in the UI then we have potential issues.
Thanks for any feedback!
Regards,
Michael Smith
Siebel Administrator
Strategic Technology Group
Gartner Group
Office: 1-203-964-0096 ext. 3450
Mobile: 1-505-720-7385

I checked the Business Component in Tools and see it is based on virtual table (V_SRS_COMP) and not on a physical table.
So it looks like it doesn't write to the DB.

Similar Messages

RT Build Specifications: Component Definition Category is unresponsive

Hi,
I am using LabVIEW 2013 SP1 f2, with Real-Time 13.0.1
When I open the Properties page for a Real-Time Application build specification (to run on a cRIO-9075), and select the Component Definition category, I find that the following occurs:
- LabVIEW becomes unresponsive, and thinks for a while. It takes approximately 20-30 seconds or so to finally show the Component Defintion page.
- When I click on Create a component definition file (.cdf), nothing happens. As I write this, I see "Required software components", and then these are greyed out: "Software component description", and "Software version" - but there is nothing to select or change?
- If I click on another category, it takes in the order of 20 seconds to finally show this category.
- To close the build spec (by pressing OK), it also takes a long time (more than 60 seconds).
- Things are fine with the build spec if I never enter the Component Definition category.
Is anyone else experiencing this?
Any help would be appreciated.
Christopher Farmer
Certified LabVIEW Architect
Certified TestStand Developer
http://wiredinsoftware.com.au
Solved!
Go to Solution.

Hey Chris,
I believe the following patch is the fix that you are looking for.
LabVIEW Real-Time Module 2013 SP1 Application Builder Patch Details
http://digital.ni.com/public.nsf/allkb/D72B45C6905D327A86257CC800547992?OpenDocument
There's a link to download the patch at the bottom of that page.
Regards,
Ryan

Field 'Contract Period' does not exist in definition for business component

Hi everyone
I create a Field "Contract Period" in BC "Quote" with an extended table and put it in the applet view "Quote Full Form Applet" the field works fine in the view, we can update and insert information in it and shows perfect in the database also.
Our problem is when create a Integration Object for reports in BIP Reports the system said something like this when we try to generate the sample data:
ObjMgrLog     Error     1     0000002d4cd016bc:0     2010-11-02 13:18:39     (adptutils.cpp (5715)) SBL-EAI-04376: Method 'FieldValue' of business component 'Quote' (integration component 'Quote Template') returned the following error:
"Field 'Contract Period' does not exist in definition for business component 'Quote'.
We compiled the BC and the IC, and did the Deployment of the IC in Tools but it didn't work, the thing here is if I remove this field the report works fine. Is there any other component or Object that we have to compile to get Siebel recognition?
Any ideas?
Thanks in advance
Edited by: user7286211 on Nov 2, 2010 8:05 PM

To do the same change with the transaccion FB02 y FB03, create an enhancemente point in the program: SAPMF05L dynpro: 1301, module: DYNPRO_MODIFIKATION, at the of perform open_fi_dynpro_mod and write:
LOOP AT SCREEN.
IF sy-tcode = 'FB02'.
    IF screen-name = 'BSEG-HKTID'.
      screen-input = 1.
      screen-invisible = 0.
      screen-active = 1.
      screen-output = 1.
      screen-group4 = ' '.
      MODIFY SCREEN.
      EXIT.
    ENDIF.
elseif sy-tcode = 'FB03'.
      IF screen-name = 'BSEG-HKTID'.
      screen-input = 0.
      screen-invisible = 0.
      screen-active = 1.
      screen-output = 1.
      screen-group4 = ' '.
      MODIFY SCREEN.
      EXIT.
    ENDIF.
endif.
ENDLOOP.
and, all ready.

Create a Site Definition file with Visual Web part in Visual Studio

I tried to create a site definition file in Visual Studio 2013 and SharePoint 2013 by following the MSDN tutorial:
Walkthrough: Create a Basic Site Definition Project. Near the end, I added a virtual web part control to the site definition and registered MyWebPartControls in the site definition's default ASPX page as written in the MSDN tutorial:
Unfortunately, IntelliSense doesn't show any MyWebPartControls: tags, and VisualWebPart1 is highlighted with a warning “Element 'SMWebPart3' is not a known element. This can
occur if there is a compilation error in the Web site, or the web.config file is missing.”
Since it’s a warning, I went ahead to build and deploy the solution. However, when I used the site definition template to create a subsite, it returned a parser error:
Unknown server tag 'MyWebPartControls:TestSiteDef1.VisualWebPart1'
I spent half day researching and debugging, and finally solved the problem. The issue is on the registration line:
<%@ Register Tagprefix="MyWebPartControls" Namespace="TestSiteDef.VisualWebPart1" Assembly="$SharePoint.Project.AssemblyFullName$" %>
The $SharePoint.Project.AssemblyFullName$ is a replaceable parameter to provide values for SharePoint solution items whose actual values are not known at design time. Unfortunately, it does not find the right assembly name during the deployment. It should
be replaced by the Assembly’s Strong Name. Here is how I fixed the problem step by step:
In Solution Explorer, open the package node and double click Package.package
Click Manifest tab in the Package.package.
Copy the full assembly name in the package’s manifest. It may be similar like this:
Assembly="TestSiteDef,
Version=1.0.0.0, Culture=neutral, PublicKeyToken=a300f1f2da8ae976"
Back to the site definition’s default.aspx page, replace the
Assembly="$SharePoint.Project.AssemblyFullName"
in the registration line with the copied text:
Assembly="TestSiteDef,
Version=1.0.0.0, Culture=neutral, PublicKeyToken=a300f1f2da8ae976"
Change the Namespace from
Namespace="TestSiteDef.VisualWebPart1"
to
Namespace="TestSiteDef".
The line to register the web part in a site definition file will look like this:
<%@
Register
Tagprefix="MyWebPartControls"
Namespace="TestSiteDef "
Assembly="TestSiteDef, Version=1.0.0.0,
Culture=neutral, PublicKeyToken=a300f1f2da8ae976"
%>
Clean, build and deploy the solution. It works like charm. (Note: the warning message on visual web part may still exist, but you can ignore it).

Assuming your .ascx.vb file is inheriting from the web part class, you can add the custom properties in the same manor (language syntax aside).
Be sure to use the attributes to correctly identify and scope the properties. (see:
http://www.sbrickey.com/Tech/Blog/Post/SharePoint_Attributes_for_Web_Part_properties)
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com

How to create a page-definition for bounded task-flow?

I should be able to create a page definition which declare all bindings required for a bounded task flow.
How do I do it in JDeveloper 11.1.1.2?
How do I navigate to the page definition when I am in the bounded task flow "Diagram tab"?

I found out the following:
1. To create a page-definition file for a bounded task flow
Right click on the "Default" activity (not a view activity) of the bounded task flow, select "Create Page Definition" from the context menu.
2. To go the page-definition file for a bounded task flow
Right click on the "Default" activity (not a view activity) of the bounded task flow, select "Go to Page Definition" from the context menu.
My new question is:
In JDeveloper 11.1.1.2, how do I create page-definition for a bounded-task-flow if all activities are view activities (page fragments) ?
How does JDeveloper I want to create page-definition for the task-flow instead of create page-definition of the page fragment or the page?

Errors in the high-level relational engine. The data source view does not contain a definition for the table or view. The Source property may not have been set.

Hi All,
I have a cube in which i'm using the TIME DIM that i created in the warehouse. But now i wanted a new measure in the cube which is Average over time and when i wanted to created the new measure i got a message that no time dim was defined, so i created a
new time dimension in the SSAS using wizard. But when i tried to process the new time dimension i'm getting the follwoing error message
"Errors in the high-level relational engine. The data source view does not contain a definition for "SSASTIMEDIM" the table or view. The Source property may not have been set."
Can anyone please tell me why i cannot create a new measure average over the time using my time dimension? Also what am i doing wrong with the SSASTIMEDIM, that i'm getting the error.
Thanks

Hi PMunshi,
According to your description, you get the above error when processing the time dimension. Right?
In this scenario, since you have updated the DSV, it should have no problem on the table existence. One possibility is that table has been specified for tracking in the notifications for proactive caching, but isn't available any more for some
reason. Please change the setting in Proactive Caching into "MOLAP".
Reference:
How To Implement Proactive Caching in SQL Server Analysis Services SSAS
If you have any question, please feel free to ask.
Best Regards,
Simon Hou
TechNet Community Support

Error while creating UI component.

Hi all,
In Mobile perspective I am able to create service component but when I create Mobile ui component I am getting the below error.
Software Component does not support selected Development Component Type. Required DCs are located in an SC that is not visible from the selected SC .
Please help me in resolving this.
Thanks and regards,
Rajesh.A

Hi Rajesh
Please follow this thread
Re: mobile plugins for NWDS 7.1
Go to development infrastructure perspective and check if required dc's are there in XOCA.
If all the plugins are there and if you stll face the problem try this..
In the plugins folder go to com.sap.tc.mobile.wdlite.ide folder
Open the plugin.xml file inside it with a notepad or text editor.
Some where near the end of file you can see something like this:
<DCDependency at-build-time="true" id=tc/mobilecfs/core/wrapper name="tc/mobile/cfs.core.wrapper".........>
Just delete this line. It wont cause any side effects.
Now restart NWDS and everything will be fine.
Regards
Vidyadhar
Edited by: Vidyadhar N on May 4, 2009 6:30 AM

Help Solving: Does not contain a definition for 'Select'.....

Hi,
Need help solving a Task that returns a Task<IEnumerable<Writing>> so I can fill ObservableCollection<ViewModels.IWritingItemViewModel> Writings for my
Design Time Data Page:
<d:Page.DataContext>
<designTimeData:MainPageViewModel />
</d:Page.DataContext>
My constructor does this:
public MainPageViewModel()
var writings = this.GetGroupsAsync();
this.Writings = new ObservableCollection<ViewModels.IWritingItemViewModel>();
var viewmodels = writings.Select((x, i) => new WritingItemViewModel
Writing = x,
VariableItemSize = (i == 0) ? Common.VariableItemSizes.Writings : Common.VariableItemSizes.Normal,
My var writings = this.GetGroupsAsync(); is:
public async Task<IEnumerable<Writing>> GetGroupsAsync()
await this.GetMenuDataAsync();
return this.Groups;
which in turn gets data from:
private async Task GetMenuDataAsync()
Uri dataUri = new Uri("ms-appx:///DesignTimeData/MenuData.json");
StorageFile file = await StorageFile.GetFileFromApplicationUriAsync(dataUri);
string jsonText = await FileIO.ReadTextAsync(file);
JsonObject jsonObject = JsonObject.Parse(jsonText);
JsonArray jsonArray = jsonObject["Groups"].GetArray();
foreach (JsonValue groupValue in jsonArray)
JsonObject groupObject = groupValue.GetObject();
Writing group = new Writing(
groupObject["UniqueId"].GetString(),
groupObject["IsHeaderInteractive"].GetBoolean(),
groupObject["ViewType"].GetString(),
groupObject["ModelType"].GetString(),
groupObject["Page"].GetString(),
groupObject["Title"].GetString(),
groupObject["Subtitle"].GetString(),
groupObject["ImagePath"].GetString(),
groupObject["Description"].GetString(),
groupObject["GroupId"].GetString()
foreach (JsonValue itemValue in groupObject["WritingMenus"].GetArray())
JsonObject itemObject = itemValue.GetObject();
group.WritingMenus.Add(new WritingMenu(
itemObject["UniqueId"].GetString(),
itemObject["Page"].GetString(),
itemObject["Title"].GetString(),
itemObject["Subtitle"].GetString(),
itemObject["ImagePath"].GetString(),
itemObject["Description"].GetString(),
itemObject["Content"].GetString(),
itemObject["WritingsId"].GetString(),
itemObject["GroupId"].GetString(),
Convert.ToInt32(itemObject["Item"].ValueType)
this.Groups.Add(group);
and I get this Error:
Error 5 'System.Threading.Tasks.Task<System.Collections.Generic.IEnumerable<App1.DesignTimeData.Writing>>'
does not contain a definition for 'Select' and no extension method 'Select' accepting a first argument of type
'System.Threading.Tasks.Task<System.Collections.Generic.IEnumerable<App1.DesignTimeData.Writing>>'
could be found (are you missing a using directive or an assembly reference?)
I'm creating collections of:
public interface IWritingItemViewModel : Common.IVariableSizedItem
Models.Writing Writing { get; set; }
and my class for creating data is:
public class Writing
public Writing(
string uniqueId,
bool isHeaderInteractive,
string templateType,
string viewModelType,
string page,
string title,
string subtitle,
string imagePath,
string description,
string groupId
this.UniqueId = uniqueId;
this.IsHeaderInteractive = isHeaderInteractive;
this.TemplateType = templateType;
this.ViewModelType = viewModelType;
this.Page = page;
this.Title = title;
this.Subtitle = subtitle;
this.ImagePath = imagePath;
this.Description = description;
this.GroupId = groupId;
this.WritingMenus = new ObservableCollection<WritingMenu>();
public string UniqueId { get; private set; }
public bool IsHeaderInteractive { get; private set; }
public string TemplateType { get; private set; }
public string ViewModelType { get; private set; }
public string Page { get; private set; }
public string Title { get; private set; }
public string Subtitle { get; private set; }
public string ImagePath { get; private set; }
public string Description { get; private set; }
public string GroupId { get; private set; }
public virtual ObservableCollection<WritingMenu> WritingMenus { get; private set; }
How can I solve or successfully complete this code?
Thanks!...
Code is like a box of chocolates!...

I looked into your error message again, I found something interesting:
Error 5
'System.Threading.Tasks.Task<System.Collections.Generic.IEnumerable<App1.DesignTimeData.Writing>>'
does not contain a definition
for 'Select'
and no extension method
'Select' accepting a first argument of type
'System.Threading.Tasks.Task<System.Collections.Generic.IEnumerable<App1.DesignTimeData.Writing>>'
could be found (are you missing a
using directive or an assembly reference?)
That means: Task does not contain the definition for Select. This was reasonable, Task does not inherit IEnumerable interface.
var viewmodels = writings.Select((x, i) => new WritingItemViewModel
Writing = x,
VariableItemSize = (i == 0) ? Common.VariableItemSizes.Writings : Common.VariableItemSizes.Normal,
public async Task<IEnumerable<Writing>> GetGroupsAsync()
You need get the IEnumerable<Writing> for Select use. See this for more information:
How to: Return a Value from a Task
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Schema to be handled does not contain a definition of type Activate

I am trying to create a new datatype called Activate based on an xsd file and this is the message I get ...
"Schema to be handled does not contain a definition of type Activate"
Anyone have any ideas why I can't use any of my external definitions in my mapping??

Hi Andrew,
There are errors in your XSD :
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified">
<xs:element name="envelope">
<xs:complexType>
<xs:sequence>
<xs:element ref="header"/>
<xs:element ref="body"/>
</xs:sequence>
<xs:attribute name="version" use="required" type="xs:NMTOKEN"/>
</xs:complexType>
</xs:element>
<xs:element name="header">
<xs:complexType>
<xs:sequence>
<xs:element ref="manifest"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="manifest">
<xs:complexType>
<xs:sequence>
<xs:element ref="authentication"/>
<xs:element ref="taxonomy"/>
</xs:sequence>
</xs:complexType>
(1)There is no reference named 'body', 'authentication' and 'taxonomy'
(2)It should be closed (either by <xs:element name="manifest"/> or </element> )
Hope this will help you.
Regards
Suraj

Schema to be handled does not contain a definition of type Order

Hi,
I am getting the error 'Schema to be handled does not contain a definition of type Order'
when i tried to import an XSD to create a data type in Integration repository. I checked my XML with the XML SPY and it is vallid.
Am i missing something? How can i import an XSD to create a datatype.
Regards,
Sharadha

Hi,
Make sure the datatype name and the main element name in the external xsd is same.
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="..." targetNamespace="....">
<xsd:complexType name="Activate">
Also check this link same problem
Schema to be handled does not contain a definition of type Activate
Error: Schema to be handled does not contain a defintion of type
Re: Calling Idoc structure in creating Data Type
Re: How to import XSD?
Please reward points if it helps
Thanks
Virkanth

Creating Graphics Component in Forte with GUI's

I have created a JFrame with 2 JPanels in it that are placed side by side. However, I want to access these JPanels with Graphics...but I have no idea how to do that within Forte...I am using a Mouse Click on an Evaluate button to trigger the event...in normal java programming, from what I have seen, people create the JPanel class extends, etc. and then they put a paint() method within it...but in the Forte environment, I have no idea how to access either panel because Forte duzznt init it as a class but as just a component...I tried using Canvas instead of JPanel but that got me no where...can what I want be done within Forte or must I do this by my own editing, etc? thank you....jerry blimbaum panama city, fl

I managed to get it work at the end...
First, the components directory was at this location:
C:\Users\<username>\AppData\Local\Adobe\Flash CS5\en_US\Configuration\Components
Then, to make a component out of a MovieClip, right click on the MovieClip in the library and select "Component Definition" and check the checkbox "Display in Components Panel". What I did then was to right click on the MovieClip and selected export swc file, and saved it in the directory above. This exported only one Component, which was fine for me. Probably it would be possible to do something similar to save a library of components as a .fla or .scw or so, but I don't know the details.

Need help in finding open source for creating Login component

hi
Pls any one help me out in finding some good open source for creating login component for my application
i have heard about josso but i am not able to find how to use it if anyone can help in setting up josso i wil be very thankful to that person and also if anyone can help me finding some other open source i will be very grateful ,,
Pls help its very urgent and i am running short of time

DECODE(l.attribute_category, 'Coverage Template Header', l.attribute3) Penalty_Bonus,
DECODE(l.attribute_category, 'Coverage Break', l.attribute1) Mon_Break_Start,
DECODE(l.attribute_category, 'Transaction Type', l.attribute1) Split_Covering,Uh oh, the dreaded entity attibute value, or generic, data model.
http://asktom.oracle.com/pls/ask/f?p=4950:8:::::F4950_P8_DISPLAYID:10678084117056
I am afraid slow performance is a built in feature of this database design, not much you can do in queries.
You could possibly create the views as materialized views and query those instead.
Quote from the linked article
But, how does it perform? Miserably, terribly, horribly. A simple "select
first_name, last_name from person" query is transformed into a 3-table join with
aggregates and all. Further, if the attributes are "NULLABLE" - that is, there
might not be a row in OBJECT_ATTRIBUTES for some attributes, you may have to
outer join instead of just joining which in some cases can remove more optimal
query plans from consideration.
Writing queries might look pretty straightforward, but it's impossible to do in
a performant fashion.

SBL-DAT-00222: An error has occurred creating business component 'Admin SEA

Hello,
I am also facing simillar issue.
I am trying to create admin account through Siebel Data bean using Business object "Users" and business component "User";
It works from Web client. but fails from siebel databean program.
Following is an error in SCCObjManager log :-
Please ask your systems administrator to check your application configuration.
ObjMgrMiscLog Error 1 0000001650241a04:0 2012-08-13 14:26:48 (busobj.cpp (1666)) SBL-DAT-00222: An error has occurred creating business component 'Admin SEA Application' used by business object 'Users'.
Please suggest.
Siebel Environment details:-
Siebel 8.2.2.0.0 - Windows 2008 R2 SP1
Database - Oracle 11g
We are using database as security adapter.

I have never worked with Databeans and neither with Siebel 8.2.2.
But when I look in Siebel 8.1.1.3 Tools at the Business Object 'Users', I don't see the business component 'Admin SEA Application'.
The Business Component does exist, but in a different Business Object.
Perhaps you should review the code of the Databean.
If all else fails, you can try to add it through Business Object 'Employee' and Business Component 'Employee'.

How create a Component Usage for a BI Report

Hi,
I am new to CRM and I am trying to Display a BI Report Inside of a CRM WebClient UI, but I cannot find where to create a Component Usage for my BI Report. I have done the following steps:
1. I defined my (BI) report in Customizing for Customer Relationship
Management under UI Framework > UI Framework Definition > Display SAP NetWeaver BI
Reports in CRM.
2. I defined a logical link in Customizing for Customer Relationship Management under UI
Framework > Technical Role Definition > Define Navigation Bar Profile.
3. I know that the next step is to create a Component Usage for the BI Report in the runtime repository
Editor. But I donu2019t know where to do this step, is their any Transaction Code for this?
Thanks for any help

Hi,
Am I right in understanding that you want to make your BI report available as a link in a workcenter? If yes, then you have to make the logical links available per business role. You can get some hints from this WIKI.
[https://wiki.sdn.sap.com/wiki/display/CRM/AddyourcustomBSPcomponentasalinkinaWork+Center]
and this
[https://wiki.sdn.sap.com/wiki/display/CRM/HowtoaddcustomBIReportsonReportsWorkcenterlinkinWEB+UI]
Regards,
Arun Prakash

Creating a component in Flash CS5

Hi,
How can I create a component using Flash CS5? I have tried to follow various documents I have found on google and went about it in the following way:
1. I created an empty FLA.
2. I created a MovieClip containing some graphics, and named the MovieClip "MyTestComponent" in the Library.
3. I selected the MovieClip's properties in the Library and selected "Export for Actionscript", and made the MovieClip inherit from fl.core.UIComponent.
4. I saved the FLA in the directory "C:\Program Files (x86)\Adobe\Adobe Flash CS5\Common\Configuration\Components" and restarted Flash. At this point I would expect that the MyTestComponent component would show up in the Components panel, but it did not.
5. I tried to publish the FLA as an SWC file and place the SWC file in the same file as above. According to my understanding, both this and the step above should have worked, but it did not.
So, what am I missing?
Also, where can I find an up-to-date documentation on how to create components to be used in Flash CS5?

I managed to get it work at the end...
First, the components directory was at this location:
C:\Users\<username>\AppData\Local\Adobe\Flash CS5\en_US\Configuration\Components
Then, to make a component out of a MovieClip, right click on the MovieClip in the library and select "Component Definition" and check the checkbox "Display in Components Panel". What I did then was to right click on the MovieClip and selected export swc file, and saved it in the directory above. This exported only one Component, which was fine for me. Probably it would be possible to do something similar to save a library of components as a .fla or .scw or so, but I don't know the details.

Does creating a component definition in UI write to tables or schema ?

Similar Messages

Maybe you are looking for