Does it bring any harm or damage to the iphone 4s if let say there is a drop of water drop onto the iphone 4s RECEIVER??
does it bring any harm or damage to the iphone 4s if let say there is a drop of water drop onto the iphone 4s RECEIVER??
Water and electronics are a bad combination. I've seen phones get a few drops of water on them and never work right again. Mind you, I've also seen phones (old flip phones) go through both washer and dryer and continue to work for years.
Does your phone still work? Are you experiencing any problems? If the answer to both of those questions is no, you should be okay.
Similar Messages
-
Does it cause any harm to charge the iPhone 4 everyday from 70/60/50% to 100%?
I mean, not leaving it to the required 20% 10%...The iPhone can be charged at anytime for any amount. There is no requirement to wait until the percentage drops to 10%, 20%.
-
I'm in trouble, my iPod Touch is giving 4th shock when recharge and the battery does not last any more. who knows or has a similar problem, please help me. Note: all this after I downloaded the new version OS5.
I would make an appointment at the Genius Bar of an Apple store because of the shock issue. I doubt it was caused by the update.
-
Hey, i have an iphone 4, and it is upto date, the problem is that my phone does not play any videos online except on facebook, all other videos do not play instead a crossed play sign appears on the video. Please help.
I watch YouTube videos on a regular basis - mostly with the YouTube app but also with Safari.
Some YouTube videos are supported to be viewed on a computer only or with a Flash capable device, which is becoming few and far between since Adobe no longer supports Flash on any mobile platform.
Sometimes I get this video cannot be played on this platform, but rarely. -
I need to bulk upload images from iPhoto to Auctiva (auction software) that will then be posted to eBay; however Java was disabled on my computer some time ago due to "known issues." I have 10.5.8 so does this mean that I can't use Java? If not, then is there a workaround to be able to use the bulk uploader from Auctiva? As it stands now, I have to upload photos individually which is super time consuming.
You can re-enable it for special purposes, opposite of disabling it...
Disable Java in your Browser settings, not JavaScript.
http://support.apple.com/kb/HT5241?viewlocale=en_US
http://support.google.com/chrome/bin/answer.py?hl=en-GB&answer=142064
http://support.mozilla.org/en-US/kb/How%20to%20turn%20off%20Java%20applets -
my iPhone 4s (bought today) won't get past the activation screen. It says 'it may take a few minutes to activate your iPhone' and then skips to another screen saying 'activation failed - try again'. Any solutions?
Apple's activation server is down.
I called Apple and the support team had the same issue.
All you can do is be patient. -
How do I put timecode on the storyline. In FCP 7 there was a time code reader that read the actual TC on the source material. There isn't one in FCP 10.1...Any recommendations???
TC has not been lost...skimmer shows source TC.
Nanoflash external recorder via SDI on a Sony PMW-EX3.
Ok so Compressor will show source TC on an individual clip, good I didn't know this and it will be helpful.
My scenario. I build a timeline with a whole days shooting involving many different clips and build a Sequence from that-editing out the off camera questions/mistakes etc. In the past I would export with source TC with a Timecode Reader filter applied. Now, it is a TC Generator filter that is available that starts from 00:00.
1. Possible solution, forget the source TC since I have a timeline built with (counter) TC on it and send that to client or get Apple to add it in the future.
2. Apply TC Generator on a clip by clip basis and manually change the TC to match source material. Probably too, much effort though.
Chris -
My new iPad 3 constantly loses the wi fi signal. Does Apple have any plans to correct this issue or should I return it. I had no problem with my original I pad. Both are in the exact same location in my house. I'm finding this very annoying and disappointing and am being forced to us my 4 g data plan
You may already have tried this, but before you completely give up, I'd check your home router software and also reset the router. I haven't seen this particular issue arise on these forums with new iPad devices, so perhaps it has to do with outdated software or configuration on the router not playing well with the new device....
-
I have been trying to register for Games Centre on my iPhone 4. I have tried so many Nicknames (even obscure and ridiculous ones), and it tells me that every single Nickname is aleady in use by another user. Does anyone else have this problem? Any suggestions on how to overcome this? It would help if the Games Centre had a "Contact Us" tab.
Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd -
Hope I'm using this forum right. I purchased a 1st Generation Apple TV on eBay. Unfortunately, I cannot get it to turn on. I have another Apple TV (1st Generation) that works flawlessly on another TV. So I tried to use the new unit on this TV with same electrical cord and HDMI cable. No luck. It would not turn on. So I do not know if I have a defective unit or if there's another method of turning on the Apple TV. Again:
1. I double checked and it was on the correct HDMI setting (the other Apple TV worked on it) and used the same cable
2. I double checked that the electrical was correct - again, the other Apple TV worked correct.
Any suggestions on fixing this would be most appreciated.
Thank youWelcome to the Apple Community.
A good indication would be the status light to begin with, it should flash rapidly on start up and then settle down (assuming the status light is working-they have a habit of fading)
The other thing you could try is cycling the resolutions in case the previous user has left it on a setting that your TV doesn't support.
Press and hold both the 'menu' and '+' on the Apple Remote for about 6 seconds.
Press '+'or '-' on the Apple Remote to cycle through the display resolutions.
Pause a couple of seconds after each press for the Apple TV to accept your selection.
When Apple TV reaches an acceptable display resolution and “If you can see the Apple logo, select OK” appears on your TV screen, press 'select' .
If that doesn't help, I fear the Apple TV is defective. -
I work on a Power Mac G5 running OSX 10.5.8.
We recently had to upgrade Java.
Now every time I download a PDF I get the message "There was a RAISE without a handler. The application will now close."
I downloads the PDF OK, but then Safari closes and I have to start it back up to get to my email.
What is the message telling me? It did not do this before we upgraded Java.I'm having the same issue. Again, unfortunately. And of course you will find through various searches that it is a reoccurring issue, one that Adobe seems to have failed to acknowledge.
You can delete your preference files. Same thing. RAISE blah blah crash.
You can even go and do a restore from an uncorrupted backup from over 4 months ago, and yet it still doesn't solve the problem, thus there is a compatibility issue.
The program is battling with another program (of which there really is no telling) and therefore crashing the moment you open it. The software itself is clean and uncorrupted, yet somewhere deep within OSX there is a problem that won't allow the software to open.
The only temporary solution i've found to solve the problem is a clean adobe install. Just delete and uninstall all and any traces of Adobe Acrobat, then reinstall to find a working adobe product. For a small while, at least.
I've never tried creating a new account, but from what others say it works. Not worth my time though.
If anyone was wondering I have zero third party plugins. Its straight from Adobe CS4. Pro version.
Someone above mentioned using the drop down menu in acrobat to reset the software. I can't even do that! The "RAISE" window pops up before that actual software! Its ridiculous!
Its really quite peeving to know that this issue has been around for years and Adobe seems to just ignore it. I know I don't want to pay for a company that fails to meet their customers needs. This is your problem Adobe, not ours to deal with. Fix It. -
I've updated my Iphone but cannot activate it? When I try through wifi it says the activation server is unavailable try later and I've been doing this for 5 hrs now. When I try to activate it through Itunes it says there's no SIM in the phone when there is. The phone worked perfectly before the updating of the software? Can anyone help?
Hi johnquinn1950,
If you are having activation issues with your iPhone after an update, you may find the following article helpful:
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/ts3424
Regards,
- Brenden -
Charging while playing. Does it do any harm to the ipad?
All is said above!
I use ipad 4 retina.
Thanks
M. from GermanyIt shouldn't.. There is a thyristor inbuilt to stop the battery from overcharging, and also allows the iPad to run off mains power while it charges etc.
-
Hi,
I've just moved on from an iphone 5 to an iphone 6.
I'm now on my second attempt at restoring it through the icloud.
My photos and videos are unavailable and it keeps saying I'm low on storage. At this stage it just keeps saying it's updating but it's been saying that for 8 hours and I still don;t have any photos available....any advice appreciated. It's getting a little frustating
Thanks,
EmmaThe backup cannot be restored to the iPhone if there is not enough storage space available.
-
How can I find the owner of a found phone that must have been reported stolen but all you want to do is find out who the person is that owns the phone. But you have no idea who the person is who stole the phone in the first place but now you only want to give it back to its rightful owner.
I found a iPhone 5s, and I'm willing to return to the owner ASAP, but it seems that "he" have not turned on "Find my iPhone".
Could anyone help me get in touch with the owner, that was probably here for the 2014's World Cup?
I'm a Brazilian Apple user, and got stolen 6 months ago. I'm fully aware of what it is. Please, don't flood me with the obvious. The law here DOES NOT WORK.
This owner must get it back, even if I must send it overseas.
Thank you for the support.
<Edited by Host>
Maybe you are looking for
-
[SOLVED]Java error running a .jar file
Hi. I'm running Arch 64 and I keep getting this error when trying to run java -jar TwinkEdit-0.6.9.jar (from twinkle.sourceforge.net -- a flashcard program for palm. This .jar is the desktop editor for the flashcards. It's worked before on Linux ...
-
Issue while invoking a stored procedure in DB2 from Oracle OSB flow
oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/Test_Project/Application/Project1/TestSP [ TestSP_ptt::TestSP(InputParameters,OutputParameters) ] - WS
-
Advantages of using higher version of catalog Database.
Hi Gurus, Wanted to know what are the advantages of using higher version of catalog database. for ex: my target database is 10.2.0.4 and catalog database is 11.2.0.1
-
How do you monitor backup progress
How can you monitor the progress of a backup? I use timemachine and an external drive to do my backups on my 09 Macbook pro. I want to be able to see the amount of files transferred and time remaining or any other pertinent info. Not just a spinning
-
Custom transaction codes?
Hi All, Is there any possibility in CRM to create our own transaction code? I want to create my own transaction code to create BP - Person - new role -> contracted employee as default. Thanks and Best Regards, Abdul