Does jaxrpc with attachments work with Dynamic Proxies?

I cannot seem to get jaxrpc with attachments to work with a dynamic proxy client.
anyone get this to work and if do, can you post an example???
thanks,
henry

hi kathy-
thanks. i'm using jaxrpc 1.1.2 version.
i can get everything to compile fine but i get errors when i try to send it.
my previous post "trailing block elements must have an id attribute" , Arun states that jaxrpc with attachments does NOT work.
is this a planned feature in 2.0 or will I just have to use SAAJ???
thanks.

Similar Messages

  • Reinstalling AE and PP due to an error with dynamic link. Where do i find the program install? And tips on how to reinstall without messing things up? last question is, does my recent files and saves work after the reinstall?

    I have allready bought the programs, but need to reinstall AE and PP due to an error with dynamic link.
    Where do i find the program install?
    And tips on how to reinstall without messing things up?
    last question is, does my recent files and saves work after the reinstall?
    Thank you

    karianne wrote:
    I have allready bought the programs, but need to reinstall AE and PP due to an error with dynamic link.
    Where do i find the program install?
    Which versions? Which operating system?
    Try Download and Installation Help

  • Encountering error while working with Dynamic Regions.

    Hi All,
    I am a beginner in ADF and on a quest to learn ADF. Sometimes I am struggling in the process. Now, when I am working with Dynamic Regions, encountered problem below
    Step 1 : Created a simple department TaskFlow with Department Form
    Step 2: Created a Simple employee TaskFlow with Employee Details
    Step 3: Created a Main page with oracle 2 column layout
    Step 4 : Dragged and dropped department TaskFlow on to main page second facet as Dyanmic region . Created a bean as RegionBean
    Step 5 : Dragged and dropped department TaskFlow as Command Link on the first facet
    Step 6 : Dragged and dropped employee TaskFlow as Command Link on the first facet
    The page runs and shows department information when it renders. But when I click on employees command link, at first it shows employees table with no data and says "ACCESS DENIED ". Then if I click on either department or employee command link, it errors out with below info
    javax.el.PropertyNotFoundException: Target Unreachable, identifier 'vs' resolved to null
         at com.sun.el.parser.AstValue.getTarget(Unknown Source)
         at com.sun.el.parser.AstValue.isReadOnly(Unknown Source)
         at com.sun.el.ValueExpressionImpl.isReadOnly(Unknown Source)
         at oracle.adfinternal.view.faces.renderkit.rich.EditableValueRenderer._getUncachedReadOnly(EditableValueRenderer.java:476)
         at oracle.adfinternal.view.faces.renderkit.rich.EditableValueRenderer.getReadOnly(EditableValueRenderer.java:390)
         at oracle.adfinternal.view.faces.renderkit.rich.EditableValueRenderer.wasSubmitted(EditableValueRenderer.java:345)
         at oracle.adfinternal.view.faces.renderkit.rich.EditableValueRenderer.decodeInternal(EditableValueRenderer.java:116)
         at oracle.adfinternal.view.faces.renderkit.rich.SimpleInputDateRenderer.decodeInternal(SimpleInputDateRenderer.java:73)
         at oracle.adfinternal.view.faces.renderkit.rich.LabeledInputRenderer.decodeInternal(LabeledInputRenderer.java:56)
         at oracle.adf.view.rich.render.RichRenderer.decode(RichRenderer.java:342)
         at org.apache.myfaces.trinidad.render.CoreRenderer.decode(CoreRenderer.java:292)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.__rendererDecode(UIXComponentBase.java:1334)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.decode(UIXComponentBase.java:865)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.processDecodes(UIXComponentBase.java:965)
         at org.apache.myfaces.trinidad.component.UIXEditableValue.processDecodes(UIXEditableValue.java:287)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildrenImpl(UIXComponentBase.java:1204)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildren(UIXComponentBase.java:1190)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.processDecodes(UIXComponentBase.java:962)
         at oracle.adfinternal.view.faces.renderkit.rich.table.BaseColumnRenderer$UIXColumnFilterWrapper.processDecodes(BaseColumnRenderer.java:2108)
         at org.apache.myfaces.trinidad.component.UIXCollection.processComponent(UIXCollection.java:1087)
         at org.apache.myfaces.trinidad.component.TableUtils$1.process(TableUtils.java:238)
         at org.apache.myfaces.trinidad.component.ChildLoop.runAlways(ChildLoop.java:55)
         at org.apache.myfaces.trinidad.component.TableUtils.processFacets(TableUtils.java:232)
         at org.apache.myfaces.trinidad.component.TableUtils$2.process(TableUtils.java:261)
         at org.apache.myfaces.trinidad.component.ChildLoop.runAlways(ChildLoop.java:55)
         at org.apache.myfaces.trinidad.component.ChildLoop.runAlways(ChildLoop.java:48)
         at org.apache.myfaces.trinidad.component.TableUtils.processColumnFacets(TableUtils.java:253)
         at org.apache.myfaces.trinidad.component.UIXTable.processFacetsAndChildren(UIXTable.java:379)
         at org.apache.myfaces.trinidad.component.UIXCollection.decodeChildrenImpl(UIXCollection.java:206)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildren(UIXComponentBase.java:1190)
         at org.apache.myfaces.trinidad.component.UIXCollection.processDecodes(UIXCollection.java:200)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildrenImpl(UIXComponentBase.java:1204)
         at oracle.adf.view.rich.component.fragment.UIXRegion.decodeChildrenImpl(UIXRegion.java:635)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildren(UIXComponentBase.java:1190)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.processDecodes(UIXComponentBase.java:962)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildrenImpl(UIXComponentBase.java:1204)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildren(UIXComponentBase.java:1190)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.processDecodes(UIXComponentBase.java:962)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildrenImpl(UIXComponentBase.java:1204)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildren(UIXComponentBase.java:1190)
         at org.apache.myfaces.trinidad.component.UIXForm.processDecodes(UIXForm.java:75)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildrenImpl(UIXComponentBase.java:1204)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildren(UIXComponentBase.java:1190)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.processDecodes(UIXComponentBase.java:962)
         at javax.faces.component.UIComponentBase.processDecodes(UIComponentBase.java:1048)
         at javax.faces.component.UIViewRoot.processDecodes(UIViewRoot.java:926)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl$ApplyRequestValuesCallback.invokeContextCallback(LifecycleImpl.java:1519)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:372)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:202)
         at javax.faces.webapp.FacesServlet.service(FacesServlet.java:508)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:173)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:125)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:468)
         at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:468)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:293)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:199)
         at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
         at java.security.AccessController.doPrivileged(Native Method)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
         at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
         at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    Please help me !!!!!!
    Thanks

    Hi Shay Shmeltzer ,
    Thanks for your quick reply. Below is response for your queries
    What scope did you specify for the bean? View Scope
    Also which browser are you using? Firefox
    Thanks for the link. I started to build dynamic region after taking a look at the video
    What else do you think might be the issue
    Thanks
    Edited by: User44444 on Dec 4, 2012 12:44 AM

  • Does worst case analysis work with model parameters?

    The worst case analysis does not seem tow work with model parameters. I performed a worst case analysis on a simple one transistor amplifier stage. It gives correct answers for resistor tolerances, but for the transistor model parameters it never changes them. I did the same with a diode in the circuit and entered tolerances for the diode parameters and it never used the tolerances.

    That's the same message I get. See attached circuit.
    Attachments:
    FETamp.ms10 ‏96 KB

  • Is it possible to have your whole family on one apple id or is it better to have each person have there own? If each has their own does each id have to buy their own music and apps? How does find my iphone work with one apple id or two?

    Is it possible to have your whole family on one apple id or is it better to have each person have there own? If each has their own does each id have to buy their own music and apps? How does find my iphone work with one apple id or two? also I am going to be going off to college soon should I make an itunes id for my self and how will I get all the music from the old id?

    Is it possible to have your whole family on one apple id or is it better to have each person have there own?
    Yes, it is possible. 1 apple ID can be associated with up to 10 devices.
    If each has their own does each id have to buy their own music and apps?
    Yes, all purchases are non-transferable.
    How does find my iphone work with one apple id or two?
    Every device associated with one apple ID through Find my iPhone is tied to that Apple ID; Find my iPhone will work in the same way with up to ten devices associated with one apple ID. You cannot enable Find my iPhone for one device across two apple IDs
    I am going to be going off to college soon should I make an itunes id for my self and how will I get all the music from the old id?
    If you have authorized a computer with the old apple ID, you can transfer old media purchased through the old to other devices via iTunes. This doesn't mean the media purchases through the old apple ID it transferred to the new account. If you plan to make future purchases and don't wish to share them with others, make your own apple ID.

  • HT201240 This process does not appear to work for me.  I'm running 10.8.3.  I created a new user for a guest staying with me.  They have gone now and I am attempting to either change the password or delete the user.  It won't allow me to choose the user I

    This process does not appear to work for me.  I'm running 10.8.3.  I created a new user for a guest staying with me.  They have gone now and I am attempting to either change the password or delete the user.  It won't allow me to choose the user I created.  I am logged in as myself and it states that I am an "Admin".  The user I'm attempting to change is listed as a "standard" user and there is a white checkmark inside an orange circular background on the user pic in the list of users. 
    Can someone help me?  I am having a hard time believing that OSx will allow me to create users and allow them use of my computer and it's drives, yet it will not allow me to change the password so I can monitor what they might have been doing while logged on?  What if this were my child?  This guest left under sketchy circumstances, and I'd really like to be able to ensure they were not using my computer to do illegal things or to have illegal communications.
    Any help would be appreciated.  (It's odd that it was so simple to "create" a user and set a password for them.......but it's complicated or a little known process to reverse.
    Thanks.

    Here are two screen shots to show you what I am seeing.  The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as).  The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue).  However when I click on the user "Orion" nothing happens.  It will not change to highlight that user.

  • DOES THE APPLE REMOTE WORK WITH THE IPOD TOUCH..? WITHOUT A DOCK..

    HI
    DOES THE APPLE REMOTE WORK WITH THE IPOD TOUCH 5TH GEN..? WHITHOUT A DOCK..??
    THANKS ANYONE

    This Apple remote requires a dock since this remote uses IR and the iPod does not ha IR capibility,.
    Manufacturer Information
    Apple Remote with iPod and iPhone: Please note a Universal Dock is required in order to use the Apple Remote with your iPhone or iPod.
    http://store.apple.com/us/product/MC377LL/A/apple-remote?

  • Does the apple remote work with the ipod touch 4th gen?

    Does the apple remote work with the ipod touch 4th gen?

    Yes, but it also requires Apple's Universal Dock to go along with it.  Otherwise, it is useles.
    B-rock

  • HT201335 does the Ipod touch work with the airplay mirroring

    Does the Ipod touch work with airplay mirroring?

    No. Only iPhone 4S and iPad (2nd or 3rd Gen) as it requires more processing power. You can still use airplay with your device though.

  • Does the ipod video work with the original ihome?

    does the ipod video work with the original ihome?

    Welcome to Apple Discussions!
    If you mean this one...
    http://www.ihomeaudio.com/products.asp?productid=10015&deptid=1003
    Them yes. I am using one myself. You may want to purcahse these if it does not come with them (depending on how old it is)
    http://www.ihomeaudio.com/products.asp?productid=10016&deptid=1000
    btabz

  • Does the iPod Mini Work with Windows?

    I am thinking of buying an iPod mini but I don't have an Apple computer. Does the iPod mini work with Windows efficiently? Thanks....

    Hello Ian,
    Can you be really specific about the necessary Windows XP updates needed? I run XP Pro on a rather new computer and just got an IPOD mini. I'm ready to tear my hair out because iTunes seems to crash my computer every time I change one CD for another. iTunes runs REALLY, REALLY slow for me. Also read on the board that iTunes 6.0 and the mini don't work well together. True or not true?
    Thanks - Genevieve

  • Does the Ipod nano work with microsoft XP?

    Does the ipod nano work with MS windows XP? itunes will recognize my Nano 7G, therefor I cannot sync,

    Have you try putting your ipod into disk mode if you need help putting it in disk mode here's a page from apple
    of how to put your ipod nano into disk mode: http://support.apple.com/kb/ht1363

  • Does photoshop elements 13 work with windows vista?

    I have V10 and a Windows Vista PC that is fast and paid for,
    Thinking of purchasing new software from Adobe.
    Does photoshop elements 13 work with Windows Vista?

    No. Windows 7 or Windows 8.x only.
    System requirements | Adobe Photoshop Elements

  • I always have trouble with my mailbox. It is always asking for my passwords but everything has been verified. How can I get it to stop doing it and start working????

    I always have trouble with my mailbox. It is always asking for my passwords but everything has been verified. How can I get it to stop doing it and start working????

    There is only one thing that happens -- the Server does not respond.
    Your mac concludes that you must have entered the wrong password. That may happen once, but then other issues become more likely, and it keeps asking for a new password.
    Sometimes the Server is down for maintenance. Sometimes something is configured wrong. Some services do this on purpose to get you to use WebMail (pick up your Mail with your Browser) so they can show you some ads.

  • Does Adobe Photoshop Elements work with MacBook Pro with Retina display?

    Does Adobe Photoshop Elements work with MacBook Pro with Retina display, please?
    Have searched Adobe website for answer - most recent is 2013 answer, saying no.
    Contradicted by a staff ember who only referred to Photoshop, not Elements.
    Reason I need it is that iPhoto does not support very high resolution photos - which I have now scanned onto my MacBook and do not want to re-scan!! After 90 minutes at my local Genius bar (lovely folk, very conscientiously searching for an answer...), re-scanning was their final piece of advice.
    Help, please...

    Hello Smis,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand you are having issues with your HP Monitor on your MAC. I am providing you with an HP Support document: Updating a Monitor Driver, where it states under the sub-heading Using HP monitors on a Mac "HP monitors are not supported in a Mac environment. However, newer Macs use graphics with VESA modes and can display to most HP LCD monitors. To do this, connect the monitor to the Mac while the Mac is off, and then turn on the MAC. The monitor should operate at 60Hz. The INF and software for the HP monitor are for Microsoft Windows and cannot be run in a standard MAC OS environment."
    This being said all I can advise is that you check to see that the monitor is set to operat at 60Hz and contact Apple for assistance if that does not get your monitor displaying correctly.
    I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Maybe you are looking for

  • No videeo on A31

    I have an A31 that has no video. The system boots up, but there is no video or any sign of video. I was using the system earlier in the day with no problems. It may have gone into suspend mode, it may have gone into hibernate mode. I don't know for s

  • How do I put a water mark on my photos

    I am new to Iphoto and computers, but I aam working on it!  I am interested to learn HOW TO PUT A WATERMARK on my photos when (if) I set up a Website. Is there anything on Apple that would help?  Or maybe a book that I could get from the Library?? Th

  • Use computer to control digital piano -- Is this possible?

    I connect my Macbook and Yamaha Clavinova digital piano via USB Midisport interface. It works properly for midi input, that is to say I can play the digital piano and record the musical notes in Garage Band. But when I press play button in Garage Ban

  • Dynamicly creating an internal table with header line

    Hi experts, I am trying to do a read on an internal table using field symbols of type any table. To be able to read more than one row at once, I'd like to read it into another internal table (instead of just one line and instead of looping through th

  • Multiple speakers without multiple expresses

    Is there a way to have a mac-mini control many speakers with iTunes without the hardware burden and radiation burden of many airport expresses? I wired up my house with lots of speakers all over the place, and the wires all go to one location. Ideall