Does JMF Support multilingual absolute paths for video playback?

Hi everyone,
I hope I can find some answer here.
Does JMF supports multilingual paths for videos? E.g. I have a video located by the following URL:
G:\video\Stürmische\video.mp4
When I try to open this video by JMF, I get the following Exception: Problem playing video+
javax.media.NoPlayerException: Cannot find a Player for :file:/G:/video/Stürmische/video.mp4_
When I use the same video.mp4 file with path containing only simple latin letters, it's played normally.
Is there any problem with JMF regarding to multilingual paths?
Many thanks,
Armine

868310 wrote:
I assume that it's a JMF cons. and IMHO, multilingual support for video paths/names should be added in it.Several things...
1) JMF is designed to play both local files and RTP/RTSP file sources. As such, it uses URLs as resource locators. It makes perfect sense to make that design decision.
2) URL encoding only allows alphanumeric characters and a handful of special characters. Considering the internet was invented by the United States army and our keyboards don't have those symbols, it makes perfect sense to make that design decision.
3) Most importantly, JMF hasn't been updated since 2002 and development has been completely discontinued... so "multilingual support" won't ever be added to it.
And it isn't multilingual support you're asking for, it's support for non-ASCII characters.
It is my understanding that you can take a path like:
G:\video\Stürmische\video.mp4
Run it through some encoding procedure, and come out with a usable URL like:
G:%5Cvideo%5CSt%FCrmische%5Cvideo.mp4
Which I got by using the encoder on the following website:
http://www.blooberry.com/indexdot/html/topics/urlencoding.htm
Coincidentally, had you done the research that I suggested you do, you might have learned that Java already has something built in to handle encoding non-compliant URLs for you.
http://download.oracle.com/javase/1.5.0/docs/api/java/net/URLEncoder.html
So, I'd expect you could use the URLEncoder class to implement suggestion #3 from my previous post.

Similar Messages

  • Premiere Pro Does Not Support Audio-Only Capture For Some Formats, Such As HDV?

    In the PPro CS 5.5 Help file  under, "Recording audio", it says:
    "Note: To capture an audio-only file from a digital video source, choose Audio from the Capture menu in the Logging pane of the Capture panel.
    "Premiere Pro does not support audio-only capture for some formats, such as HDV."
    I'm shooting in HDV and if I want to capture audio only, would I just need to switch my setting to DV?
    The only thing is my Canon HV20's HDV audio is MPEG-1 Audio Layer 2, 16 bit, 48 kHz.
    My DV setting is PCM audio, which I think is a better quality format, right?
    Would there be any noticeable difference?
    Thanks.

    Capture your HDV material in the normal way and just drag audio only from the source monitor to the timeline.

  • Hi I am trying to find absolute path for emmet extension dreamweaver cc 2014.1

    Hi I am trying to find absolute path for emmet preferences in dreamweaver cc 2014.1 tried stack overflow
    still cant get it to work get error message folder not found. Any help greatly appreciated thanks.

    "...emmet preferences..."? You mean http://www.emmett.io? Have you asked them?
    Anyhow, the docs say this -
    Emmet for Dreamweaver supports extensions: you should open Commands > Emmet > Emmet Preferences dialog and enter absolute path to extentions folder. Unfortunately, Dreamweaver doesn’t support folder picking dialog so you have to type it manually.

  • Does jmf support rtsp protocol?

    i wanna know does jmf support rtsp protocol? now, i play an video(rtsp://localhost/test.avi) by JMStudio, but failed(Controller Error: Failed to realize).
    Anybody can give me some suggestion on how to solve this problem?
    I also know whether i can implement rtsp protocol by jmf? thanks in advance!

    Hi,
    From what I understand optomux is a standard that determines the syntax of the command sent. The commands are sent through serial or Ethernet. You can use LabVIEW (the VISA VIs) to communicate with a device using serial or Ethernet. However, there are no VIs that will build the optomux commands.
    I'm not familiar with them, but you can check out the optomux VIs included with the Fieldpoint explorer. That should give you an idea of how to use the VISA to implement optomux communication.
    DiegoF
    National Instruments.

  • Does SAP support open tender process for Vendor selection

    Hi all,
    Does SAP Support Open tendering process for Vendor Selection.
    I men in my clients scenario. For vendor selection process for any material starts with advertisement of tender  in newspaper. Vendor replies back with his quotation. After receiving technical and commercial quotation, the organization go for technical bidding and those who qualify in technical bidding they contest for commercial bidding. After commercial bidding, comparative statement is prepared and then purchase committee approves the vendor. The problem is that any no. of vendors from any where can give their reply to the tender as it is a government organization. So, how to map this process in SAP as we are not directly sending RFQ to the vendor, instead he reply back with quotation directly once he sees the advertisement in newspaper.
    I want you all to suggest me whether to keep this process in SAP or out of SAP. waiting for your response.
    Regards,
    Amit

    Hi Ravi,
    Thanks for your response. My problem is that the organization advertise its tender in newspaper of all india circulation and seeing that tender vendor reply back with quotation. They don't identify who all are the vendors to whom RFQ is send. only when reply of vendor comes with quotation client comes to know about the vendors submitting quotation. Normally one vendor is selected for one material and 20 to 25 vendors give their quotation. Is it feasible to bring those 25 vendors in SAP if only one will be selected. Because in any way, for any processing we need to create vendor in SAP. So do we need to create 25 vendors, though we know we require only one finally. Can you please clarify this issue. If you want I can mail you the whole process map.
    Thanks & Regards,
    Amit

  • Does iTunes have any hidden picture controls for video playback (e.g. contrast, brightness) ?

    Does iTunes have any hidden picture controls for video playback (e.g. contrast, brightness) ?
    I haven’t been able to find any.
    Since the .m4v file type appears to prevent any video bought or rented from the iTunes Store from being played using any other program the lack of these picture controls - if indeed they are lacking - make it seriously deficient as a video player.

    Thanks for the rapid response to my enquiry.
    I know that it’s possible to adjust the monitor’s performance via System Preferences but it is rather long-winded and I’d rather not alter the settings for the entire screen (and then have to change them all back once finished) when it’s only the video playback window that needs adjustment.
    Since iTunes provides various options using the Equalizer for adjusting sound playback it seems rather odd that they don’t have a similar panel for video.
    Regarding QuickTime.
    Apparently earlier versions (such as 7) had picture controls but the current version (10.4) does not.
    I assume Apple are phasing out QT whose development seems to have stopped - or rather gone backwards since it now lacks capabilities it once had - and intend in future to treat iTunes as their universal media player which no doubt makes sense from their point of view.
    I wasn’t aware of the .m4v file type when I made my first and probably last video purchase via iTunes yesterday and didn’t realise that it would restrict my options for playback so completely.
    The experience has really put me off buying any additional video from the iTunes Store.
    Back to DVDs.

  • Does ilife11 support a 60 fps HD Video camera?

    Does ilife11 support a 60 fps hd video camera? i am in the process of purchasing a new camera and need to know if ilife11 can upload, edit and process a movie.

    http://help.apple.com/imovie/cameras/en/index.html?lang=en_US

  • ERR: This request does not match the context path for any installed web app

    We are currently using weblogic 6.1 SP6 and facing "Error 404 Page not found" error very oftenly.
              This error is first encounter while uploading file at File folder, although does not happen at every upload, but was quite consistent always at upload file stage. At this moment, this error can occur at any stage, when ever we run any heavy process on the server (like importing large amount of data or pushing the data to different ERP - system by using custom integration. The system works fine after restarting.
              Please help me out to resolve this issue as this very critcal for our production environment.
              ERROR:
              ####<May 12, 2005 4:17:12 PM SGT> <Error> <HTTP> <MatrixTransit> <myserver> <ExecuteThread: '13' for queue: 'default'> <> <> <101147> <HttpServer(7105637,null default ctx,myserver) found no context for "/ematrix/emxLogin.jsp". This request does not match the context path for any installed web applications and there is no default web application configured.>
              ####<May 12, 2005 4:17:15 PM SGT> <Error> <HTTP> <MatrixTransit> <myserver> <ExecuteThread: '13' for queue: 'default'> <> <> <101147> <HttpServer(7105637,null default ctx,myserver) found no context for "/ematrix/emxLogin.jsp". This request does not match the context path for any installed web applications and there is no default web application configured.>
              ####<May 12, 2005 4:17:16 PM SGT> <Error> <HTTP> <MatrixTransit> <myserver> <ExecuteThread: '13' for queue: 'default'> <> <> <101147> <HttpServer(7105637,null default ctx,myserver) found no context for "/ematrix/emxLogin.jsp". This request does not match the context path for any installed web applications and there is no default web application configured.>
              ####<May 12, 2005 4:17:17 PM SGT> <Error> <HTTP> <MatrixTransit> <myserver> <ExecuteThread: '13' for queue: 'default'> <> <> <101147> <HttpServer(7105637,null default ctx,myserver) found no context for "/ematrix/emxLogin.jsp". This request does not match the context path for any installed web applications and there is no default web application configured.>
              ####<May 12, 2005 4:17:18 PM SGT> <Error> <HTTP> <MatrixTransit> <myserver> <ExecuteThread: '13' for queue: 'default'> <> <> <101147> <HttpServer(7105637,null default ctx,myserver) found no context for "/ematrix/emxLogin.jsp". This request does not match the context path for any installed web applications and there is no default web application configured.>
              THANKS
              Rohit

    Rohit
              How did you resolve the issue?
              I am facing the same.
              Thanks
              Amit

  • Does RAP support custom ECDSA certificate for terminating on controller ?

    Q: Does RAP support custom ECDSA certificate for terminating on controller ?
    A: From 6.3 RAP supports custom certificate both RSA and ECDSA for terminating on controller.No additional license required for terminating RAP with custom RSA certificate. However in order to use ECDSA we need ACR license. RAP supports DER,PEM and PKCS12 formats for uploading certificates
    (Aruba) #show crypto isakmp sa peer 10.1.1.252
    Initiator IP: 10.1.1.252
    Responder IP: 10.1.1.2
    Initiator: No
    Initiator cookie:80422941ab0bd9f4 Responder cookie:c1011c781ed24a2e
    SA Creation Date: Thu Jul 23 13:34:42 2015
    Life secs: 28800
    Initiator Phase1 ID: C=US S=CA L=sunneyvale O=Aruba OU=IT CN=00:0b:86:8f:57:f5 E=[email protected]
    Responder Phase1 ID:
    Exchange Type: IKE_SA (IKEV2)
    Phase1 Transform:EncrAlg:AES256 HashAlg:HMAC_SHA2_384_192
    Authentication Method: ECDSA with SHA-384 on the P-384 curve
    IPSEC SA Rekey Number: 0
    Aruba AP

    I think below documents will be helpful to you.
    http://docs.oracle.com/cd/E23943_01/apirefs.1111/e13952/taskhelp/webservices/webservicesecurity/CreateDefaultWSSConfig.html
    This document tell you that you can attach a weblogic webservice configuration using weblogic admin console.
    After creating this configuration you need to updated this configuration as per the steps given under :
    Use X.509 certificates to establish identity
    Thanks,
    sandeep

  • Connecting the canon SX50 to HDTV for video playback???

    Connecting the canon SX50 to HDTV for video playback???
    ok, Got this Camera, like it, except for a few confusing issues. I was told, in order to playback HD video onto my HDTV Samsung, with an HDMI4 on the left side of the TV, all I needed was a HDMI to HDMI cable.
     (#1) Shut off both TV and camera, plug the cable into this HDMI plugin, turn on the TV and Camera power supply, and it should recognize, then start paying.
    Well, I did it both ways, (#1) shut off,then turn on, and (#2) I just inserted the camera's HDMI to the HDMI4 while both were on, and tried opening up the Samsung's' Tools >Inputs, etc, and still nothing!
    Is there an easy way to accomplish this?
    The second issue i'm having , is how to shut off the slow motion playback, when viewing the videos, which were not recorded in slow--mo, and it's frustrating trying to playback in normal speed, but instead it plays in slow-mo.
    I'm not quite sure I'm recording in full HD...The payback is only 60i

    Thanks grazie!
    Well, i accomplished most of that and at least got the video on the display (Samsung Anynet HDMI3) But no sound!
    I was also able to control the SX50 TV Display with my samsung remote, kool.
    As far as the playbgack volume, I checked the camera, I did notice the OPERATIONAL SOUND was off, but when I played back the video on the camera itself, i did have volume.
    On that subject of Slow motion videos, if i'm watching each video, then see one playing back in slow-motion, does that mean i actually filmed it in slow motion, without knowing? ( i can send it through Pinnacle Studio 15HD and speed it back up, but theres no background volume anyway)  if i did unknowingly videotaped in slow motion, i bettter be more observant in the future.
    I'm going to increase that ''Operational sound'' on the tools / Camera and try to playback to see if I have any sound.
    I have a Yamaha 7.1 reciever, and TV, BD player,Time-Warner cable all is connected to this receiver....I was pushing all buttons for inputs to see which one would work for sound with video, but could not find any.  Thanks, or grazie grazie!

  • PPro engine for video playback question

    Joe mentioned in another thread that Encore 2.0 uses "PPro engine ... for video playback, instead of DirectShow". Does this imply that Encore DVD requires a CPU with the SSE2 instruction set like PPro does? Thanks.

    Yes.

  • When I use my IPhone 4S to view the Shaw Go Movie Central App when I am at home I only use WiFi which is automatic, I start watching a show and sometimes I will get a message like "you can not use your cellular for video playback" or something close to th

    When I use my IPhone 4S to view the Shaw Go Movie Central App when I am at home I only use WiFi which is automatic, I start watching a show and sometimes I will get a message like "you can not use your cellular for video playback" or something close to that. Then I received an email from Telus saying I had used my 3G instead of Wi-Fi  using 75% of my data. How can this happen when I'm on Wi-Fi at home? If it switched to 3G for some reason I should have been disconnected and not just transferred to 3G network using up my data. What is the fix for this??

    It doesn't have to be that complicated, Verizon iPhones come unlocked, just tell VZ you're going on Holiday/Traveling and suspend the service, no need to pay for service if you're not going to be using it. Pick up local SIM cards in the countries of your choosing, pop them in, re-activate iMessage and you're set!
    I recommend getting a SIM card from the Three network in England, they have great EU roaming rates and free like-home roaming in Italy.
    Set your phone's region to match the country you're in, it'll save from some headaches when calling local/international numbers.
    To answer your questions,
    1. If you choose not to have a local SIM card, it is good to keep your phone in Airplane mode to save battery.
    2. Make sure the two iPhones have different names to reduce sync/restore issues.
    3. If husband has an iPhone also, you can chat with iMessage/Facetime, just give him heads up about the new number you'll have. Otherwise, use Whatsapp if he's got an Android. You can activate Whatsapp with your American number or the international number if you choose to get a SIM in Europe.
    Also, Get the MagicJack app and/or Google Hangouts, both of those apps provide you with free calling to the USA and Canada using any internet connection. Google Voice is another good way to SMS across the seas.
    Let me know if you need any more tips for iPhoning across the pond.

  • Volume control for video playback through Apple TV2

    I am trying to configure the volume settings used on airplay through apple TV2 and a macbook pro and Iphone4 all with most recent updates.
    I am using the apple remote app on my iphone to control the apple tv.
    Whats working:
    Using the pandora app on my iphone through aiplay to the apple tv, I can control the volume using the plus and minus buttons on the side of the iphone for volume control. Very cool and easy.
    Using the apple remote app on my iphone I can control the itunes volume of different speakers by clicking on the airplay icon and using a slider.  Not as cool as using the hard +/- buttons but still works.
    Whats not working:
    Controling volume on appleTV2 through the iphone remote app for video playbacks like netflix, and youtube.
    Why I want this: RIght now I can control most of the multimedia right from my iphone including cranking the music up:) But when I switch over to video(Netlfix, Youtube) I have to get out another remote (stereo reciever) to control the volume. It seems we are so close to being able to control everything off the iphone, the only thing missing is volume control for video playback.
    Is there a setting that can be changed or a solution I havent found?
    Thanks

    Same problem with TV3. HDMI volume output is not adjustable, neither with the original Apple remote nor with any universal. Why ? Every simple settop-box is able to be volume adjusted. And a Mac Mini too ?!!!
    I use a flatscreen TV. it has 3 HDMI inputs and one optical out for the audio going to an amp standing behind it. The sound of the TV is switched to go to the optical out.
    HDMI 1 is connected to the satellite settop box with its  own remote control ( channel +/-, volume +/- etc. ) it work s fine.
    HDMI 2 is connected to the MacMini HDMI out with its own remote control ( channel/music +/-, volume +/- ) it works fine too.
    HDMI 3 was connected to Apple TV3 with its own remote control ( channel/music +/- but no volume ). I sent the TV3 back to Apple.
    What's going wrong in the mind of Apple ? Why is the HDMI volume output of the MacMini adjustable with the Apple remote, and the TV3 not ?
    I want not to discuss, wether a 4th remote control is useful or not. I don't want it. I want to adjust the volume with the originl remote control of the specific unit I use, because I need it anyway. It worked since years, but not with Apple TV3.
    How can we help Apple to open the volume +/- function on their own remote control ?

  • How does jmf support for avi format

    I have written code to play audio and video filesusing JMF..My code is able to run only in mp3 and other 2 formats, but it is failed to run other formats like avi, mov etc..Now i need to play my video file which is their in avi format. Please tell me how does my code supports in other formats too...I had searched in google and it has given me some sites, but i didnt get any solution from them.

    Ok, I rant about this same thing again
    AVI is a file format. Think of it like a can. Either you have a can openor or not, but just because you have the ability to open the can doesn't mean you can necessarily eat what's inside.
    AVI is simply a file format that you can embed audio and video data into. The video itself is going to be encoded using some video encoding, like, RGB or DivX or something like that.
    JMF supports the AVI filetype, but it only supports a few video encodings for the AVI.
    [http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/formats.html]
    Same with MOV files. Again, a filetype. You need to make sure the encoding inside the file is supported by JMF, otherwise it won't be able to play it.

  • Flash player support for video playback in Lumia 8...

    When will  Nokia/MS support Adobe Flash player for Lumia 800 like they have for Android?
    Also I should be able to download a browser of my choice on Lumia as well. Any clarifications from Nokia most welcome!

    Adobe has announced that it has ceased development of Flash for mobile phones (in favour of HTML5, and due to the opposition of both Apple and Microsoft to allow support of Flash for their mobile operating systems), so from that direction neither Microsoft nor Nokia is going to get any help.
    If the Adobe Flash Video format specification is publicly available to use or to license (I don't know if it is), then at least Microsoft could implement support for it, if they wanted to (Nokia might not have sufficient rights from Microsoft to add new codecs to Windows Phone).
    So, you might direct your question primarily to Microsoft, rather than Nokia (of course, a Microsoft representative will probably read this, too, but whether they'll response or not is another matter).

Maybe you are looking for