Does Logic have db scales markers on the output levels or individual chanels?

I am looking to buy Logic Pro or Pro logic.  Does Logic have VU markers on the output levels, or individual chanels. I use this as a guide to mixing as I know that bass should be at -6db, lead vox at -6db at the output meter on a traditional desk. I can see that Logic does has levels for each chanel but no scale next to it. Is this an option that can be turned on and off?
I can see that it registers the peak level, but I need to see the average level. Looking at pictures and clips on you tube aren't enough to confirm my answer. I know that Pro Tools has this which can be switch on or off. Does Logic?
Hope my question makes sense. thanks in advance.

Ben Collier wrote:
Anchor points!
What's happened to those? They are/were brilliant and worked perfectly in 7 & 8. If you set them up in 9 it remembers it when you are in the sample editor, but if you then copy that audio file (such as a cresc. cymbal) with said anchor point to another part of the song, the anchor point is forgotten, and if just gives you the start of the audio file as the reference point. Am I the only one with this problem?
Not seeing this - this works just as before here . .

Similar Messages

  • This is an odd one, does Logic have its own clock?

    Hey all,
    This is one for the books over here. Does Logic have its own clock? Not as in clocking, 44.1 48 etc. Not in that respect, but rather does Logic have its own "date and time" clock separate from OS X?
    Here's what's happening...
    We have two rooms here. Identical. Writing done in "A" gets sent over to "B", cleaned up, sent back over to "A" etc etc. So in the "A" room, a cue comes from "B" with a last opened time of last night at 10:00 pm. A last modified time of 10:15 pm last night. That's the data if you get info on it from a finder window. Now with Logic open if you "open" a cue from Logic, navigate to where this cue is at, it says that the cue was last opened TONIGHT at 9:40pm (which is in the FUTURE) and last modified TONIGHT at 9:55pm (also in the FUTURE). We've caught it now, and things seem to be okay if you open a cue from the finder window and not from Logic->File->Open. A cue was opened from Logic yesterday, two hours of work done, saved often, and when it was closed and then opened again after lunch, none of the work was present. And the date and time modified was again in the future. So SO weird. Cleared prefs, repaired permissions. Still happening. Anyone else experiencing this? Any tips? Advice? Does Logic have its own clock? We're baffled.
    Any help is greatly appreciated as always!
    Best wishes,
    the Earle-Tones Music crew

    Brent, thanks for seconding in here. Sometimes this kind of you'd-never-expect-it-to-happen-weirdness can be easily written off as some kind of itinerant digital voodoo without this kind of corroboration.
    So while we're on the subject of the finder lying... Folders are no picnic either.
    If you create a folder and never open it but throw a bunch of stuff into it within the same minute that it's created, its creation date and modification date will be the same. But the simple act of opening that folder for the first time can cause its mod date to change. Or, if you go into that folder and re-organize some items, or rename some items, the folder's modification date will also change.
    This means that if you have a bunch of folders contained within another folder (the "containing folder"), and you re-organize/re-name items within those folders, you can't count on the modification date of any one of the contained folders to indicate the order in which they were originally created. Because of this behavior you'll want to view by date created. But I still can't get my head around the idea that manipulation of data within a folder causes the attributes of the containing folder to change.
    This may have some bearing on your current situation... or then again, maybe not LOL!   : - )
    -=iS=-

  • I have two computers. my laptop has os 10.6.8. my mac mini has 10.5.8, hence no app store. can i buy lion on my laptop and then burn a dvd of it and install it on my mac mini or does it have to be installed on the same computer it is bought with?

    i have two computers. my laptop has os 10.6.8. my mac mini has 10.5.8, hence no app store. can i buy lion on my laptop and then burn a dvd of it and install it on my mac mini or does it have to be installed on the same computer it is bought with?

    You can do it. This article from Macworld will be helpful to you:
    http://www.macworld.com/article/161087/2011/07/install_lion_over_leopard.html
    I recommend the "brute-force" method.
    Just make sure you have your data backed up properly!

  • I purchased the multi-user iworks and recently had to replace my white imac's hard drive but didn't pay to fix the CD drive.  My iworks does not have a serial number on the box and now that my CD drive isn't working how can I reinstall this software?

    I purchased the multi-user iworks (yes back when it was new, 2009 or 2010 and recently had to replace my white imac's hard drive (but didn't pay to fix the CD drive).  My iworks does not have a serial number on the box and now that my CD drive isn't working how can I reinstall this software?

    Buy or borrow an external USB optical drive.
    See the confirmation email or covering letter to obtain the serial number. If you have lost it, contact the supplier.

  • I just purchased a camera packaged with Adobe photoshop Elements 11. I have a mac book air- which does not have a cd drive. The package did not come with a code or anything that would provide me with another way to install photoshop that came with my came

    I just purchased a camera packaged with Adobe photoshop Elements 11. I have a mac book air- which does not have a cd drive. The package did not come with a code or anything that would provide me with another way to install photoshop that came with my camera. Is there any other way i can install this on my camera without using the provided cd or buying the software again?

    That doesn't help the user with the serial code though.
    There has to be some kind of code somewhere within the package. The disk itself does not contain one. You can look here for help with finding your serial number:
    Find your serial number quickly

  • Enable Audit on SCOM Agent An exception was thrown while processing Submit Tasks does not have sufficient permission to perform the operation.

    Hi All,
    An exception was thrown while processing Submit Tasks Domain\"SDK Account" does not have sufficient permission to perform the operation.
    am getting this error when try to enable audit in one of Domain controllers.

    Dear Mark,
    i face similar problem before, i had resolve it be adding SDK service account to Operation Manager Administration group.
    Regards, Ibrahim Hamdy

  • I purchared an iPhone 4s from Dubai and it does not have FaceTime on it.  The phone is now used in Europe. How do I get to instal FaceTime please?

    I purchared an iPhone 4s from Dubai and find that it does not have FaceTime on it. 
    The phone is now used in Europe.
    How do I get to instal FaceTime please?

    The iPhone from Dubai will never be able to have FaceTime. The iPhone country of origin (serial no. and imei no.) is the culprit. The government there has banned FaceTime.

  • The glass on my iPhone 5 is missing and now my camera won't focus does it have anything to do with the glass missing?!

    The glass on my iPhone 5 is missing and now my camera won't focus does it have anything to do with the glass missing?! Would buying a iPhone extension lens like the ones you just clip on the phone help?

    Wow seems like some physical damage to the iPhone whether this is a manufacturing defect or misuse it would need to be evaluated and determined at either an Apple Store or Service provider. And yes this is most likely causing the camera not to focus.

  • Error: X "does not have permission to write to the application's directory! Are you running off a disk image? If not, ask your system administrator for help."

    I have received to following error from at least three different applications when they have attempted to auto-update recently: X "does not have permission to write to the application's directory! Are you running off a disk image? If not, ask your system administrator for help." 
    I am not running off a disk image and I have admin privileges... Not sure what the problem is, but it just started happening (a week or two ago) and I have never previously had a problem with these applications auto-updating.  I have repaired permissions and attempted other "fixes" found on the interweb, but nothing works.  Also, this is only happening on my iMac (27" Intel i5) and not my MacBook Pro (17" Intel i5) -- both are running Lion.  Please help!

    If you updated using the default install (merge) from before Tiger, you may be seeing an issue that we saw when Leopard first came out last year.
    Not sure of the fix - it was not simple - but if you search back in these forums you might find something that will help. I believe it deals with the numbers assigned to accounts (501, etc).
    If you open your Accounts Preferences and unlock the padlock, right-click Advanced Options and read your User ID and Group ID. Let us know what they are.
    Now, in the other user admin account, do the same thing.
    One of the real experts who knows much more about this than I may be able to then help.
    And be sure to check out this article
    http://pinkmutant.com/articles/Leopard/leobugs.html

  • Item no does not have a Variable Cost on the Cost Detail screen

    Hi,
    Item no does not have a Variable Cost on the Cost Detail screen. If you use the Product Cost Model, it does have a variable cost. We need to determine the reason for this nonccost. Any idea of what would be the reason is.
    Thanks,

    Hi Friends,
    I, my self resolved the issue. by considering the following 3 rd strategy in
    For Activity Type/Processes: Considered 3rd strategy as below:
    Activity Types/Processes: 1 plan Price for the Period, 6 Most Up-to-date Plan Price
    and 2 Plan Price as Average of All Fiscal Year Periods.
    Now it has been resolved.
    Thanks all.
    Now it is closed.
    Vemula

  • Hi am new to logic have been trying to use the sampler via vids on youtube but when i go on to my sampler it has no edit button next to the options

    hi i am new to logic have been trying to use the esx24 sampler via vids online but when i bring up the sampler it has no edit button nxt to the options

    Hi
    In LPX, you need to turn on the Advanced options (all of them!) in Preferences:Advanced
    CCT

  • HT4889 After using migration assistant I have had problems with some apps that were brought down from App store, as well as IntelliJ that just doesnt want to start at all. Does it have anything to do with the UID being changed?

    After using migration assistant I have had problems with some apps that were brought down from App store, as well as IntelliJ that just doesnt want to start at all. Does it have anything to do with the UID being changed?
    13-07-03 6:24:12.447 PM com.apple.launchd.peruser.502[1632]: ([0x0-0x5be5be].com.jetbrains.intellij[5805]) Job failed to exec(3) for weird reason: 13

    What is the exact name of the application you're trying to launch? Is it in the Applications folder?

  • HT4623 My ipad 2 does not have a software update in the general setting. Can I still update it and if so how?

    My ipad 2 does not have  a software update ing the general setting. Can I still update it and if so how?

    That is only a feature of iOS 5 or later...
    You have iOS 4... See Here...
    http://support.apple.com/kb/HT4972
    OR...
    Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
    See the Using iTunes Section Here...
    How to update your iPhone, iPad, or iPod touch

  • Why the iphone 4 does not have sound when I watching the recorded video?

    why the iphone 4 does not have sound when I watching the recorded video?

    Have you turned up the volume?
    Try the buttons, or the bottom audio slider.
    Does your phone normally play audio?
    And have you tried to record and audio note to check if your microphone is not faulty.

  • Can we have two alv grid in the output

    Hi
    Can we have two alv grid in the output?. If yes how can we do that using oops alv. I think first need to create the container on that two subscreen. is this correct? Thanks.
    Regards
    Raj

    >
    Rajitha1234 wrote:
    > Hi
    >
    >  Can we have two alv grid in the output?. If yes how can we do that using oops alv. I think first need to create the container on that two subscreen. is this correct? Thanks.
    >
    > Regards
    > Raj
    Hi Rajitha,
    You can have as many as ALV output in the screen By using OOPS.
    By using Container you can pass ALV output.
    see the sample Program SALV_TEST_TABLE.
    Regards,
    Prabhudas

Maybe you are looking for