Does OneKey 5.2 fix ANYTHING?
I installed the OneKey 5.2 patch and now get a new error message / warning, that says "The free dynamic buffer in the current system is insuffiecent (additional space required for OneKey Recovery:2435MB). It is recommended to release the dynamic buffer by updating the Base Backup".
WHAT did version 5.2 fix?
From what I see, NOTHING.
Thank you Lenovo
Ribbit50 wrote:
I can not find a phone # for Lenovo
Worldwide Support Center phone list
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Jane
2015 X1 Carbon, ThinkPad Slate, T410s, X301, X200 Tablet, T60p, HP TouchPad, iPad Air 2, iPhone 5S, IdeaTab A2107A, Yoga Tablet, Yoga 3 Pro
I am not a Lenovo Employee.
I AM one of those crazy ThinkPad zealots!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Similar Messages
-
Does "repair disk" or boot from OS fix anything even if nothing wrong found?
My mac was freezing a lot lately, and when I did "verify disk" it told me something like it needed to be repaired and booted from the OS dvd.
so I did that, and did "repair disk", but it found nothing wrong.
so I just restored everything from my time machine backup.
should this process have fixed anything or should I expect nothing has changed?
macbook 2007 10.6You might want to consider running the combo updater over your install to refresh your files.
Combo updater: Mac OS X 10.6.8 Update v.1.1 - 1.09 GB
http://support.apple.com/kb/DL1399
MORE INFO ON WHY RUNNING COMBO FIXES ISSUES
Apple updates available from the Software Update application are incremental updates. Delta updates are also incremental updates and are available from Apple Downloads (software updates are generally smaller than delta updates). The Combo updates contain all incremental updates and will update files that could have become corrupted.
Combo updaters will install on the same version as they're applying--no need to roll back or do a clean install. So if you think you've got a borked 10.6.8 install from a regular update, just run the 10.6.8 Combo Updater on that system.
"Delta" updaters can only take you from one version to the next. For example: 10.6.7 to 10.6.8. If somehow the 10.6.8 is missing something it should have, and that something isn't changed between 10.6.7 and 10.6.8 it will still be stale after the delta update. -
i got a macbook pro 2008 and can not back up using time machine. it eject my external hard drive everytime. does anybody has a fix???
Does your external hard drive have it's own power supply? It should.
Is your external hard drive formatted with the NTFS file system? It won't work.
It needs to be formatted either with Mac OS Extended or FAT32.
(There are drivers available to add NTFS support to OS X but their quality is unknown, especially the "free" ones.) -
My ipod touch is being read as just a simple camera and will not let me access it, how does one go about fixing this problem? My screen has recently cracked and i need to retrieve my music from it but cant do so when my computer is reading it as a camera and only showing me its pictures.
Here:
iOS: Device not recognized in iTunes for Windows
or
iOS: Device not recognized in iTunes for Mac OS X
Also try another computer. -
How much does it cost to fix the iPad cracked screen
MY iPad screen broke. How much does it cost to fix it?
Skydiver119 wrote:
It's an out of warranty repair, so the cost starts at 219 for a mini, 249 for other models and goes up depending on drive size and whether or not it's 3G
I would add that this is for a replacement iPad, not a screen, and that Apple does not repair just the screen (you probably knew that). -
FaceTime will not connect on osx 10.7.5. Does anyone had a fix please?
FaceTime will not connect on osx 10.7.5. Does anyone had a fix please?
Hope info from this article is helpful.
http://support.apple.com/kb/HT2090
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, contact Apple.
Best. -
Upgraded iPad3 to iOS6.1 and cannot connect with Cell service. Does anybody have a fix?
I just upgraded my iPad3 to iOS6.1 and now I cannot connect with Cell service. Says its "Searching". Everything else appears to be working. Does anybody have a fix? Thx!!
full update
-
Help: Just finished shooting a wedding and Aperture crashes constantly during editing. All pic's in RAW and even after making sure I have the latest Aperture update, I have had to rebuild my library twice and "repair" does not seem to fix the issue. Help?
Well!
If you have ThunderBolt, I would go with such for an External Working Drive, spinning platter or SSD depending on your budget
This does not have to be huge just big enough to house your most current Jobs
Once the Current Job is put to rest I would move it to a larger multi bay hard drive unit, USB or FireWire nothing fancy, no RAID, set up as one single Disk
This would only be accessed when something is needed from a past Job so the connection does not have to be speedy
The Drobo would be relegated to Vaults and backups
You can set up a Vault on the Drobo to back up the External Working Library and then Reconnect it when you have moved the Library over to the other Enclosure
This has worked for me pretty smoothly for a long while, but I have found over the years that one can not assume all people work in the same manner! :-) -
Barcode shows a bunch of squares when barcode is made on AI CS11. Does anyone know a fix for this? We have CS2 running on another PC and we don't get this problem.
Background:
Using FrameMaker 7.1 to create a PDF file where a CS11 barcode file is embedded. PDF generates fine but we get a bunch of squares when we copy and paste the barcode data into Notepad.
We have CS 2 running on another PC and we don't get this problem. Do I need to install a plugin (if any) for CS11 to get this to work?
Thanks!Thanks for your feedback. I was not able to mention earlier that in my line of work, we use Notepad to check if the barcode text is written correctly or if the corresponding text can be found if searched in the PDF... We use FREE3OF9.TTF font when entering text values for the barcode (usually in document/part number format exclusive for our company's use) in AI CS11. After saving the AI file, we attach it in a document using FrameMaker 7.1, then a PDF file is created. The output PDF will be a certification sheet for our products. They (our clients) should be able to scan the document/part number out of the barcode. I'm sorry, I could not divulge any other information so I am not sure if this clears out the issue. It used to work before but I had to get my PC formatted and since then I have been encountering this problem. I am trying to figure out if we missed to install a component or something got messed up after re-installing Adobe Illustrator CS11.
-
After LION update web Cam is no longer being detected at all. Does anyone have a fix? Thank you
After LION update web Cam is no longer being detected at all. Does anyone have a fix? Thank you
Thank you, Rod!
While researching frame rate I came across this helpful blog posting: Crazy about Captivate: Lessons Learned: Video and Resolution in Adobe Captivate
This is the line that caught my attention: "I discovered, after several experiments, that if you publish a course in Captivate as SCALABLE with a video inserted, no matter what the resolution, it makes the video look pixelated."
When I unclick the "scalable HTML content" button before publishing, the video is fine!
Big sigh of relief! Now I just need to figure out why audio won't play on one of the slides (it has an accordian widget, if that's relevant) and why I can no longer use Effects (I get the message, "Effect file is not valid") -
Is it me or did everyone's ipod get slow and laggy with ios 5? Does anyone know a fix?
My iPod seems to have gotten slow and laggy when I try to open up apps or even play music since I updated to iOS 5. Does anyone have a fix for this issue?
yes! I am having a bunch of issues...including really slow. it completely locked up in the nike + app, Facebook is slow...and sometimes I can't use the imessaging unless I send a picture with the text.
-
Videoprt.sys is giving me high dpc latency. Does anyone know a fix?
Hiya. I am optimizing my windows-partition. Killing all unessecary drivers, services and processes goes a long way. Also due to sloppy coding in XP kernel, I need to set processes to idle priority, to avoid CPU2 stalling CPU1 when maxed. I have also set win32priorityseparation to 25, which is superficially similar to a low-latency linux-config I did.
However still, I have a module "Videoprt.sys" which reports 1.5ms DPC latency. (Using RATTv3) Dpc latency checker also reports DPC latency of 1.5ms. I see computers out there with 10uS DPC latency
Does anyone know a fix for this?
Peace Be With You.Fixed it needed to have a return null;
this is the code
if
(MonthjComboBox.getSelectedItem().equals("") ||
DayjComboBox.getSelectedItem().equals("") ||
YearjComboBox.getSelectedItem().equals("")){
return null; -
When using quick edit for compressed CSS, edge code does not jump to the particular class but displays the whole thing. This destroys the whole purpose. Does anyone know a fix or extension for that.
I suspect that beautify doesn't touch CSS that it is not aware of (e.g. new properties/syntaxes, vendor-prefixes). See if there's a newer version available.
Which compressed CSS are you using? Most CSS libraries come with both compressed and original stylesheets, so use the original one during development/debugging, and switch to the compressed one for deployment.
Randy -
I cannot access my Hotmail account with Safari on my MacBookAir but I can access it on my Mac/Safari and also from my PCs. Has anyone experienced the same? Does anyone know a fix for this?
To find out if it's system wide or user specific, try this...
Open System Preferences>Users & Groups, unlock the lock, click on the little plus icon, make a new admin account, log out & into the new account.
Does it work in the new account? -
I updated from os 10.5 to snow leopard and my logic 8 crashes upon opening. Does anyone know any fixes? thanks
Logic 8 should have no problems in SL.
Use Software update to check if you've got the latest update for it (SU will only offer an update if it's not already installed).
Failing that, I'd start by uninstalling Logic and re-install from the DVD in case something got corrupted during the update.
Maybe you are looking for
-
Hi ! I have connect my new i pad with usb cable to my pc but i don't have internet to it. What can i do? Thanks M.Tintikaki
-
MIGO- Number of external delivery note "LFSNR"
Hi all, we use R/3 4.7 release. Is it possible to activate a check which permits to restrict the usage of that field in MIGO one time for each vendor preventing the possibility to double entry a Goods receipt? Your answer is appreciated Thanks in adv
-
Multiple joins Problem in Physical Layer.
I have two tables Departments and Employees in the physical layer of admin tool. When i am trying to create foreign keys at physical diagram its giving error. Scenario: Departments =========== Department_id (PK)
-
My laptop was stolen :( Question about CS5
My laptop was stolen earlier this month, i have a two part question, I still have the original dvds for Photoshop and Indesign the new laptop has Windows 8. I've heard CS5 versions will work on Windows 8? the other part of the question is what do I
-
Suddenly renames files edited with external editor
Not sure what I have done but now when I "edit file with..." (Photoshop CS5) using Aperture3 the version name is changed in Aperture. Looking in PShop it is dislapying the correct masterfile name but on return to Aperture3 it is changing the version