Does OpenLDAP Authenticator support TLS ?

Could not find any information to setup authentication over TLS through OpenLDAP authenticator in Weblogic 9.
Does it support such kind of connection? There is only one checkbox regarding to secure - it is "SSL Enable". Should it be checked for TLS aims?

thank you for the reply... I know that you need to use an SSL module to terminate SSL connections. We currently have many clients that terminate SSL but none that use it for TLS.
I just couldn't find documentation how the CSS SSL module handles TLS. The only reference to TLS is that it supports TLS version 1 and there is information on how to change the ssl version to TLS but nothing else.
IS there any other documentation on this or is it as simple as configuring the CSS as you would for SSL with ssl-proxy-lists and specifying ssl-server rsakeys, vips and cipher suites and letting the SSL module do everything?

Similar Messages

  • Is iPlanet Web Proxy Server support OpenLdap authentication ?

    Do you know Is iPlanet Web Proxy Server support OpenLdap authentication ?
    Thanks
    Regards,

    Hi
    This as per the HTTP/1.1 RFC (RFC2616)
    The Connection general-header field allows the sender to specify options that are desired for that particular connection and MUST NOT be communicated by proxies over further connections.
    The Connection header has the following grammar:
    Connection = "Connection" ":" 1#(connection-token)
    connection-token = token
    HTTP/1.1 proxies MUST parse the Connection header field before a message is forwarded and, for each connection-token in this field, remove any header field(s) from the message with the same name as the connection-token. Connection options are signaled by the presence of a connection-token in the Connection header field, not by any corresponding additional header field(s), since the additional header field may not be sent if there are no parameters associated with that connection option.
    Read the following at
    http://www.w3.org/Protocols/rfc2616/rfc2616-sec8.html#sec8.1.3
    and
    http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.10
    Regards
    Nagendra HK

  • Does Dreamweaver CS3  support implicit ftp over TLS?

    Does Dreamweaver CS3  support implicit ftp over TLS? I cannot find this option.

    Ask in the Dreamweaver forum. This forum is for suite specific issues only.

  • Does ImageRunner Advance C5051 Support TLS Encryption?

    Does ImageRunner Advance C5051 Support TLS Encryption? I need to scan to email using the C5051 in conjunction with Office 365. I know what settings go where, but I can't seem to find Any documentation that says "Supports TLS" , and I have gone through the actual manual, among other things. Thanks.

    Hi, EbolaSandwich! Thanks for posting!
    While our forum community members are welcome to chime in, Canon does not provide direct support for imageRUNNER series products. Instead, your dealer will be able to help you! If you don't have a dealer, please call us at 1-800-OK-CANON (1-800-652-2666) and we will be happy to provide you with the names of dealers in your area!
    We hope this helps!

  • Does SQL Developer support OS Authentication?  Will it?

    Does SQL Developer support OS Authentication connections? If not will it in the future?

    Given this has the SQL Developer been changed to remove the requirement of adding a password for an OS authenticated account? These users also have the ability to access the DB via applications and the fact that they don't have to enter a password right now is ideal. I really don't want to have to add a password for them. Will this be changed within SQL Developer?

  • Does iPlanet LDAP SDK for C, version 5.8 support TLS?

    thanx!

    "The Netscape LDAP SDK for C only supports SSL 3.0 and does not support the
    Start Transport Layer Security (TLS) Operation."
    -- from Netscape LDAP SDK for C 4.1
    so, i want to know whether iPlanet LDAP SDK for C 5.08 support TLS?

  • Does Adobe Connect support CAS authentication?

    We use CAS authentication for many of our applications.  Does Adobe Connect support CAS authentication for Single Sign-On?  Our Adobe Connect is hosted.
    Thanks,
    Rod

    Single Sign-on support is only really available with a licensed deployment. With a hosted account you are limited to API's Adobe Connect 9 * Login and requests
    Configuring SSO on a licensed deployment can be found in this document http://help.adobe.com/en_US/connect/9.0/installconfigure/connect_9_install.pdf

  • Does NW04 EP supports Axis1

    Hi,
    I am using NW04 and has deployed a repository manager, which uses axis2.0 for web service. In my code I used javax.xml.namespace.QName(String, String, String). However, in my EP, it loads QName.class from jaxrpc.jar from usr/sap/sysid/jc01/j2ee/cluster/server0/bin/ext/webservices_lib, which only has QName(String, String). As a result, error occurs.
    My question is, does NW04 EP supports axis2.0?
    If not, where can I put my xbeans.jar, which has javax.xml.namespace.QName(String, String, String), so that the classloader of EP can load this correct QName.class first, rather than the one from jaxrpc.jar in /server0/bin/ext/webservices_lib?
    Thanks,
    Ray

    Hi Ray,
    I'm trying to concume a web service deployed in NW04s server in a Java application. I'm using Axis1.4 SOAP engine. As NW04s requires authentication its throwing some exception as below, How can we make Web services to be accessed in non SAP application? Please help
    faultCode: Server
    faultSubcode:
    faultString: The User Authentification is not correct to access to the Portal Service com.sap.portal.prt.soap.PortalUMEService or the service was not found.
    faultActor: [A2SR00001] com.sapportals.portal.prt.service.soap.exception.SoapFaultHandler
    faultNode:
    faultDetail:
         error_IllegalAccessError:<type xmlns="">java.lang.IllegalAccessError</type>
    The User Authentification is not correct to access to the Portal Service com.sap.portal.prt.soap.PortalUMEService or the service was not found.
         at org.apache.axis.message.SOAPFaultBuilder.createFault(SOAPFaultBuilder.java:222)
         at org.apache.axis.message.SOAPFaultBuilder.endElement(SOAPFaultBuilder.java:129)
         at org.apache.axis.encoding.DeserializationContext.endElement(DeserializationContext.java:1087)
         at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.endElement(Unknown Source)
         at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanEndElement(Unknown Source)
         at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDriver.next(Unknown Source)
         at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(Unknown Source)
         at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next(Unknown Source)
         at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
         at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source)
         at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source)
         at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(Unknown Source)
         at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(Unknown Source)
         at com.sun.org.apache.xerces.internal.jaxp.SAXParserImpl$JAXPSAXParser.parse(Unknown Source)
         at javax.xml.parsers.SAXParser.parse(Unknown Source)
         at org.apache.axis.encoding.DeserializationContext.parse(DeserializationContext.java:227)
         at org.apache.axis.SOAPPart.getAsSOAPEnvelope(SOAPPart.java:696)
         at org.apache.axis.Message.getSOAPEnvelope(Message.java:435)
         at org.apache.axis.handlers.soap.MustUnderstandChecker.invoke(MustUnderstandChecker.java:62)
         at org.apache.axis.client.AxisClient.invoke(AxisClient.java:206)
         at org.apache.axis.client.Call.invokeEngine(Call.java:2784)
         at org.apache.axis.client.Call.invoke(Call.java:2767)
         at org.apache.axis.client.Call.invoke(Call.java:2443)
         at org.apache.axis.client.Call.invoke(Call.java:2366)
         at org.apache.axis.client.Call.invoke(Call.java:1812)
         at PortalUMEService.service.bkc.com.service.ComSapPortalPrtSoapPortalUMEServiceBindingStub.getProperty(ComSapPortalPrtSoapPortalUMEServiceBindingStub.java:114)
         at PortalUMEService.service.bkc.com.service.TestPortalService.main(TestPortalService.java:29)

  • High time SPA 3102 supports TLS and SDP

    There have been absolutely no firmware updates in years for SPA 3102
    Its a pity that SPA 3102 doesn't support TLS + SRTP with SDP (which is the default
    and widely used key exchange mechanism as supposed to some proprietary method
    or MIKEY that no one supports).
    Grandstream has greatly overtaken with TLS +SRTP in their HT.503 that also sells much cheaper.
    I have about 20 boxes of 3102 and can't throw them. I need to buy about 12 more and wish to
    have uniformity. Main problem I see with 3102 is TLS and use of SDP for SRTP key exchange.
    Otherwise is a great product.
    Please have your engineering team make this a high priority and try to provide firmware update
    for all the 3102 hw versions.
    Thanks,
    Anz

    > does not have the support for SRTP. 
    This is contrary to what a lot of information out there says. Are you sure ?!
    I would like to be able to use a gateway that can talk to a 3102 using SRTP and mini-certificate without using anothe 3102. There was a mention of this by your representative himself.
    I am not really interested in your upcoming ATA that is similar to SPA 3102.
    Are you going to replace all my SPA 3102 for free ?!!
    Why can't you just do a firwmare upgrade for SPA 3102.
    Please provide accurate and proper answers, that would be appreciated.

  • ACS 5.3.40 is there patch available to support TLS 1.1 and 1.2 regarding SSL termination?

    Hi,
    We are trying to reduce our susceptibility to SSL BEAST information disclosure vulnerability regarding our ACS 5.3.40 system.
    It's been suggested that we consider some  defensive measures such as cipher suite selection.
    Wherever possible, we should ensure that servers and clients that support TLS/SSL are configured to support TLS versions 1.1 and 1.2, not just SSLv3 and TLSv1.0 which is often the default configuration.
    Can you advise how this is done within the ACS 5.3.40 application? Is it just a case of patching to another level?
    (Default SSLv3 and TLSv1.0 defaults are not deemed strong enough).
    Thanks.

    same Question~
    I believe we come from the same university~
    Tsinghua, isn't it?

  • What type of HDD does MS-6382 support?

    Hi,
    My system has a MS-6382 mobo & I've got to change to the hard drive. I've been looking at ebay & the link below describes a HDD which has "ATA/133 or SATA interface and capacity of  120 GB"
    http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=16178&item=5208766733&rd=1
    I don't know much about computers, or even the right questions to ask really, but does the 6382 support 7200rpm drives, ATA/133? What general specs for a HDD should I be looking for?
    I would be grateful for any help anyone can give!
    Here is some info on my current HDD:
    HD Tune: ST380020A Information
    Firmware version : 3.39
    Serial number    : 5GC0KMYD
    Capacity         : 73.1 GB (~78.5 GB)
    Buffer size      : 2048 KB
    Standard         : ATA/ATAPI-6
    Supported mode   : UDMA Mode 5 (Ultra ATA/100)
    Current mode     : UDMA Mode 5 (Ultra ATA/100)
    S.M.A.R.T                    : yes
    48-bit Address               : no
    Read Look-Ahead              : yes
    Write Cache                  : yes
    Host Protected Area          : yes
    Device Configuration Overlay : yes
    Automatic Acoustic Managment : yes
    Power Managment              : yes
    Advanced Power Managment     : yes
    Power-up in Standby          : no
    Security Mode                : yes
    Firmware Upgradable          : yes
    Partition     : 1
    Drive letter  : C:\
    Label         : MR01-G4
    Capacity      : 74822 MB
    Usage         : 17.54%
    Type          : FAT32
    Bootable      : Yes
    Jorolat

    Quote from: Wonkanoby on 19-June-05, 21:26:02
    ata 133 is just a marketing gimick.............only data moves that fast is 2mb in the drives cache
    the drive will run at about half that speed once the cache is cleared
    dont worry about it
    Er, I got another question
    I'm now looking at this hitachi model:
    http://www.cclonline.com/product-info.asp?id=210&pc=dealtime#
    which has good reviews (probably for others in the range). I originally saw it on ebay but it turns out to be cheaper buying it from the above supplier.
    The question I have is does the MS 6382 support serial ATA? I'm reasonably sure that the above drive is parallel ATA (ie compatable with the MS 6382) because of the manufacturer's info here:
    http://www.hitachigst.com/hdd/support/d7k250/d7k250.htm
    but I thought I'ld ask before I order it or in case I change my mind (again).
    Thankyou for your help
    Jorolat

  • Does lion server support a single email address across multiple devices??

    I am looking to move from an outdated Microsoft Exchange Server 2003 to OS X Lion Server but I am unsure as to how Lion will handle email. I do not want to spend money on a new windows server if I can get a Mac Mini Server to do the job. I am a very small business with a number of email accounts for a couple employees and need access to email and calendar from both the office iMac's and my Macbook Pro when on the road. My IT guy says I need Exchange but he's been off base on a few other items recently and I wanted to check with other sources.
    I have 2 new iMac's, a MacBook Pro, an iPad1 and and iPhone4 on the mac side of things and 2 windows computers running XP. I would get rid of the windows computers completely if not for my CAD program which runs best not in a virtual machine mode.
    How well will email and calendar entries sync across devices?

    I have a very similar setup at my office. Lion Server will push email, calandar, contacts to all of your apple product with out a hitch.
    As far the Windows XP machines, you can access email over IMAP with Thunderbird, and calandars via sunbird or the built in web app.
    I would ditch the exchange server move to Mac OS X Server, and never look back.
    God Luck!
    PS. All of your devices will be in sync all the time.
    Shore answer:
    Does lion server support a single email address across multiple devices??
    Yes.

  • Does Crystal 2011 supports SAP R/3 4.6?

    Friends,
    I would like to know Does Crystal 2011 supports SAP R/3 4.6? Please help.
    Thanks,
    Tilak

    Hi,
    yes, it does. Here is a Screenshot from the CR2011 SPS6 Data Access File
    The (4) indicates:
    (4) SAP servers required to have at least the above patch levels. The following correction notes should be applied to your SAP BW / SAP NetWeaver BI system: 1125433, 1161911, 1162349, 1162416, 1170323, 1230303 and 1007048. OSS Correction Note 1007048 requires a manual configuration step.
    Regards
    -Seb.

  • Camera RAW does NOT yet support raw files for the new  Canon Sureshot S95

    Camera RAW does NOT yet support raw files for the new
    Canon Sureshot S95.
    Adobe, please can you provide an update asap

    Hello!
    I think that you need to be patient.
    There has not been any release of Camera Raw since the release of the camera.
    I recommend to try the next version once it will be released, as there might be preliminary support (and therefore not listed).
    Usually, Adobe is amongs the firsts to support a new camera.
    Even though the Camera Raw team is fielded with wonderful coders, I do not think that they do have a time machine to allow support before they have their hands on a camera

  • OK, as always I waited before downloading a new OS and I sure glad I did. On the APP store I sorted comments by most critical...and WHOA...what is Apple doing? No support for Logic 9, MS Office? Is Apple only trying to reach the iphone/iTouch crowd? HELP!

    OK, as always I waited before downloading a new OS and I'm sure glad I did. On the APP store I sorted comments by most critical...and WHOA...what is Apple doing? No support for Logic 9, MS Office? Is Apple only trying to reach the iphone/iTouch crowd? HELP! I was going to buy a new Mac pro & two 27" monitors but until I see some real problem addressing by Apple...I'll keep what I have and see how everything pans out. If anyone has any comments to ally my fears, I welcome them. I've been a devoted Mac user since 1993. 7500; G4; G5; and my latest Mac Pro...Where do I go? Again...HELP!

    Hi there,
    If you look through ALL the reviews, they are mainly good. I feel that Lion is an excellent upgrade, although not essential.
    There have been some issues with MS Office, but right now, it is up to Microsoft to issue a Lion compatible update, which will come in time. Saying this, MS Office has been working fine on my mac, it seems to be an isolated issue.
    Logic 9 seems like a strange issue. Again, an update looks to be coming soon, with Lion support.
    I do not feel that apple only focusing on the iPhone and iPad user base. There are many features carried along, but the machine can still be used for pro tools and use just as well. It still is a fantastic, reliable, fast, easy to use OS, which I have had very few problems with. Some additions you may not use, but they don't get in the way. You will love the new Exposé, Mission Control, as it is great for pro users who have many windows open at once, and the new spaces. You may however, never use Launchpad, but you don't have to, just drag it away from the dock!
    I really reccomend buying a mac with Lion, although if you are worried about bugs, wait a few months for the issues to be ironed out, and updates to be given. Because the update is so very cheap, I really think you can hardly go wrong. Try it out with your current mac, and if you like it, go ahead and buy your new ones.
    Lion is fantastic, albeit maybe rushed.
    Any other queries, just ask,
    Nathan

Maybe you are looking for