Does "Put the hard disk(s) to sleep when possible) work with external drive

I have an external backup drive which I use for doing daily backups. I have set an iCal alarm daily to remind me to turn the hdd on at the right time.
When Time Machine comes along in a couple weeks, I am going to be leaving this drive on all the time while I'm working on my computer but was wondering if the energy savings mode of putting the hard drive to sleep applies to external USB drives as well? Would be nice to know that when I put my computer to sleep at the end of the day that my external drive also goes to sleep. I'm not sure if this has to be a function of the external box or if OS X can shut off the drive.
Any wisdom?

You can test this very easily:
The "Put the hard disk(S) to sleep when possible" default time is 10 minutes of inactivity.
Just leave your Mac alone for 10 minutes: you should hear both drives spinning down. If the external noise was not clear enough, you can then "wake it up" by double-clicking its icon on the desktop:
If it was spun down, you'll have to wait a couple of seconds or so, with the spinning colored beachball, while it is spinning up again.
Note that if you're performing a task that uses only you Mac's internal HD, the external should spin down while you're using your Mac. Then if double-clicking its icon shows the colored spinning beachball stalling, it's very clear it goes to sleep as intended.
Most of the external hard drives should be able to spin down, at least all my LaCie do it with no problem.

Similar Messages

  • "Put the hard disk(s) to sleep when possible": How to Exempt One Drive?

    I have a Mac Pro with 4 internal hard drives, 2 external hard drives, the built-in SuperDrive, and a new Pioneer BDR-205 internal Blu-ray drive. Here's the problem: If the "Put the hard disk(s) to sleep when possible" option is enabled, when the system puts the BDR-205 to sleep, it will never wake up unless the computer is shut down and restarted. (Basically, it disappears from the System Profiler and can no longer be accessed.)
    If I turn off the Energy Saver "Put the hard disk(s) to sleep when possible" option, then the BDR-205 never has a problem -- but then none of my other drives ever go to sleep, either.
    Does anyone know of a way to exempt a specific drive (or drives) from being put to sleep by the "Put the hard disk(s) to sleep when possible" feature? I've found where the settings for this feature are stored, in \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist (the setting is Disk Sleep Timer -- 0 = never sleep, any other number = how many minutes before a drive is put to sleep), but I can't find where there might be some undocumented option to allow us to say, "Don't put THIS drive to sleep". It seems silly that this option is an all-or-nothing proposition.
    Anyone have any ideas? Thanks in advance.

    I am having the same difficulty. A way to exempt a specific drive from sleep would be most useful.

  • "put hard disk(s) to sleep when possible" setting - YES or NO?

    I've searched.... but I can't find a definitive answer.
    Is it a bad idea to NOT "sleep" my hard disk(s)?
    (i.e. - uncheck the "hard disk(s) sleep" option)
    I have a new macbook and I'm running Time Machine on an external (powered) drive. I have my computer set to "put hard disk(s) to sleep when possible" but I'm having problems with "improper device removal" warnings when I wake up the macbook. I would hate to shorten the life of my drives - but potentially corrupted
    files on my Time Machine disk kind of defeats the purpose of back ups.
    I realize that "sleeping" conserves battery life - but when the macbook is plugged in, what should I do?
    thanks

    the external hard drive is unmounting itself and I receive the "improper removal" warning. I've seen similar posts in the Time Machine discussions. It seems that it might be a sleep related issue. Macbook wakes - but doesn't wake external?
    (Although one time it unmounted while the macbook wasn't sleeping)
    At first I thought it was because the drive was bus powered -so I switched to a powered drive. Problem still happened - so I removed the drive from my usb hub and plugged straight into macbook usb port... but the problem is still occuring.
    (Also.... wondering if verifying my back up drive will assure me that no data corruption occurred with improper removal...of should I do another complete backup?) thanks

  • Sleep Question when "Put the hard disk(s) to sleep" is unchecked

    In the Energy Saver options, I unchecked the "Put the hard disks to sleep when possible" option ... what happens if I close the lid? Does that option get overridden and the hard drive goes to sleep?
    Will I be safe to move my mbp around in my backpack when I travel? Or do I have to shut it down totally? I tried finding the answer but couldn't find a real response.
    I just want to know if the laptop's drive stops spinning and I can move it around safely or if I should always turn off my mbp when I put it in my backpack. Thanks for any answers.
      Mac OS X (10.4.8)  

    > what happens if I close the lid? Does that option get overridden and the hard drive goes to sleep?
    Yes, it's over-ridden, the heads park and you can move it around happily
    Make sure it does actually go to sleep and not hang up on some run-away (BootCamp) process or similar ... you can tell by the noise. If it's not silent within 10 seconds of the lid closing open it up again and check Activity Monitor.

  • Finder crashes with External Drive on Sleep Mode

    I purchased my new iMac 21,5" less than a week ago, and I haven't had a problem with it except for one that it's been bugging me a lot.
    I have a LaCie 1TB Quadra d2 external drive that I use to store footage (since it's HD, the filesize won't fit in my 500TB internal hard drive), but I noticed that sometimes when LaCie external drive enters in Sleep Mode, the Finder freezes and the only two ways around this, is to force reboot, because the Finder won't answer and won't open again, or unplugging the external drive without ejecting him first, which it's not safe for me to do, because I'm afraid of hurting the device, and the files in it are pretty important.
    This happens almost everytime, especially after a long time on sleep mode. I usually leave Final Cut Pro transferring files all night (since it takes a long time) so I kinda need the sleep mode, but when I wake up, Finder and Final Cut Pro won't answer.
    I updated to Snow Leopard 10.6.8 on day one. Is there a way to fix this? Is it normal? I read somewhere that some users were having trouble with external drives on Sleep Mode, but I can't seem to find any further information about this problem.
    Thanks!

    I've got a MacBook Pro 13.3" that's a little over a month old, with a LaCie 1TB LaCie d2 Quadra with USB 3.0, #301542U and I'm suffering the same problems and a few others with it. I've got a partition on it set up as my Time Machine backup drive. I've turned off the Put the hard disk(s) to sleep when possible in the Energy Saver preferences but I'm still having the sleep problem with it. According to the LaCie Manual:
    By default, your drive will enter Eco Mode after 30 minutes of inactivity in order to conserve energy. To exit Eco Mode, simply access data on the drive and the disk will automatically restart. You can manage this feature using LaCie Desktop Manager. Click the Eco tab.
    The LaCie Desktop Manager (in my case) only takes me to the Energy Saver Preferences in OS X to adjust the time there. Turning off Put the hard disk(s) to sleep when possible doesn't seem to make any difference, the drive still goes to sleep after 30 minutes. However, after 15 minutes the drive seems to wake back up, but then during the next 15 minutes goes comatose (no power light). Sometimes it will go through multiples of these sleep wake cycles without going into a coma, but eventually it does go into a coma. This happens in between hourly Time Machine backups.
    After locking up Finder, Disk Utility and Time Machine multiple times trying to access the drive in this state I figured out that I could cycle the power switch to regain use of it (with a Finder warning of course) but this will only lead to file corruption eventually and I shouldn't have to resort to this. I've also dismounted it, expecting it to turn off and instead it goes into an extended spin down cycle (rapidly flashing light) and never turns off (or goes to sleep or what ever it's supposed to do) and once again requires turning the power switch off.
    This is just too unpredictible and unrelable for me and as soon as I get the opportunity to do a 7 pass erase I'll be returning to the place of purchase. Based on the reviews of other external hard drives a drive from another company doesn't look to be much better of a prospect so I'm not sure what I'm going to do.

  • Hard disk going to sleep without permission

    The hard disk on my Mini spins down despite the fact that I have the "put hard disk(s) to sleep when possible option" shut off. Is anybody else experiencing this? This is before the system starts going into sleep mode.

    I've never used it myself, so I'm not sure what happens to these manual settings if you use the Energy Saver System Preferences to change the settings again, but take a look at the "pmset" (modify power management settings) command. Type:
    man pmset
    ...and then press "return" at a Terminal prompt to see the "manual" pages and all of the options. Remember to type a "q" when you're done to return to the prompt. Note, "The -a, -b, -c, -u flags determine whether the settings apply to battery (-b), charger (wall power) (-c), UPS (-u) or all (-a)." And the argument is "disksleep" and then the number of minutes. So, if you want the hard drive to spin down after 30 minutes of idle time only while you're using the battery, you type:
    pmset -b disksleep 30
    ...and then press "return". If you want the hard drive to spin down after an hour of idle time no matter what power you're using, type:
    pmset -a disksleep 60
    ...and then press "return". After using the "pmset -g disk" ("get" command), it appears that the setting to put the disk to sleep when possible sets it to ten minutes. After changing it to uncheck the option, mine was then set to zero when connected to AC power.
    -Doug

  • Sleeping mode problem: the hard disk doesn't stop to run.

    Hello,
    I try to put my iMac (Lion) in the sleeping mode. The screen becomes black but the hard disk doesn't stop. I don't see any live process in the activity monitor. This problem was not there before and I have no idea to correct it.
    I you have a good idea for me !!!
    Thanks

    Then perhaps you have something now running on your system that is causing the computer not to fully sleep. You may want to open Activity Monitor to check what is running and to see if any application or process may be crashing.
    You can also try creating a new, temporary user account, then logging into the new account to see if this issue ceases.

  • 10.8.5 on MacPro5,1 - disabling "Put hard disks to sleep when possible" doesn't work any more

    I have always had "Put hard disks to sleep when possible" disabled in the Energy Saver section of System Preferences, but since upgrading to 10.8.5 this setting is no longer obeyed... I can distinctly hear the sound of my hard drives winding down and winding back up *very* often, and toggling the setting has no effect...
    There's other threads about hard disk sleep issues with 10.8.5 and it seems this is another one to add to the list... Definitely needs to be addressed because my hard drives are powering up & down quite a lot even when the system is sitting idle, which is gonna create a lot of unnecessary mechanical wear on those drives...

    Unfortunately, this is a known bug that Apple is working on. 
    I submitted feedback regarding this issue and surprisingly received a couple of phone calls from Apple support about this issue.  I ran through several questions with the tech and advised him that I temporarily resolved the issue by restoring from a saved 10.8.4 installation.  So, for the moment, everything is working as it should.  The Apple tech asked if I would be willing to re-install 10.8.5 and provide some logs, but I declined since everything is back to normal now. 
    As a side note, it has been said on other forums, the issue can be temporarily "fixed" by setting your monitor to never go to sleep and stay on, which ironically causes your hard disks to "never" sleep either.   I also provided this bit of info to the Apple tech in hopes of resolving this. 

  • It seems like I just missed the interval for the hard disk replacement program. I purchased in March 2009 a 24 inch Intel iMac . How much does it cost to have apple support at an Apple Store replace a hard drive?

    It seems like I just missed the interval for the hard disk replacement program. I purchased in March 2009 a 24 inch Intel iMac . How much does it cost to have apple support at an Apple Store replace a hard drive?

    My hard drive continually has the floating beach ball and will take massive time to fulfill a request. And then will not boot up...so then I have to do a restore and rebuild hard drive from a past saved time machine version. Works for a little bit...then the floating beachball comes more and more...until it will not boot up again. So then I restore from a previous time machine saved version....and again it works for a day or so ... until it happens again. Now it's happening faster and faster...so I think my hard drive is dying.

  • I want to upgrade my 2007 Mac desktop to 10.5 Leopard. I am currently running on 10.4.11. I have put the leopard disk into the drive and all it does is make a weird noise and then spits the disk right back out. It doesn't do this with other disks. HELP

    I want to upgrade my 2007 Mac desktop to 10.5 Leopard. I am currently running on 10.4.11. When I put the leopard disk into the drive all it does is make a weird noise and then spits the disk right back out. It doesn't do this with any other discs, only this software. Is it still possible to update this computer?

    Yes. Try Amazon.
    Before you do upgrade to Snow Leopard, make sure your Mac meets the requirements.
    Mac OS X v10.6 Snow Leopard - Technical Specifications
    Make sure the disc you tried using doesn't have any fingerprints or smudges on it. The optical drive can't read the disk otherwise.
    If your Mac won't read the disc, might be a good idea to rule out any problems with the startup disk BEFORE trying to upgrade the system.
    Using Disk Utility to verify or repair disks
    Message was edited by: Carolyn

  • Folders that I copy from my Macbook to my External Hard Disk does NOT appear on any other drive that I connect the Hard disk to (TV, PC, ... etc.)

    I'm facing a bit of a problem.
    Any folder I copy from my Macbook Pro to my External Hard Disk does NOT appear on any other device that I connect the Hard Disk to (TV, PC, etc).
    The Hard disk format is "MS-DOS (FAT)".
    The folders that are copied from Macbook appear when I connect the Hard Disk to my Macbook only, yet, the folders that I copy from a PC to the Hard Disk appear on Macbook, PC, and TV and are also available from editing from both Mac and PC.
    I was advised to install "Paragon" software and I did but I'm not sure how to use it to convert the folders on the hard drive to any format that can be read on other drives or devices (NTFS or otherwise).
    I'd appreciate some help. Thank you.

    Hi Simon.  How is it formatted, FAT or NTFS? 
    I only ask as OSX will only read NTFS partitions unless you install an App such as Paragon NTFS or Tuxera NTFS.

  • When i import movies from my iPhoto app to my iMovie app does it make a copy (thereby using double the hard disk space) or does it link to my iPhoto app? The reason i ask is i want to archive all my videos from iPhoto/iMovie. HELP!

    When i import movies from my iPhoto app to my iMovie app does it make a copy (thereby using double the hard disk space) or does it link to my iPhoto app? The reason i ask is i want to archive all my videos from iPhoto/iMovie. Do i need to archive the movies in iPhoto AND iMovie? HELP!

    Hi - I'm having the same problem with freeing up space on the HD. If I can't free space if I'm using any part of the clip, how can I split up the clips so that I can discard the part I won't use? This is crazy! I have only 4 GB of free space left!
    Also, I've tried to transfer the project file to my external HD but I keep getting an error saying I can't transfer it. I've been told this is because I don't have enough space on the HD for the transfer. I tried a similar transfer with another computer with plenty of HD space but the same error occurred. Is there a way to break up the project file into small pieces for the transfer (I'm thinking the whole movie file is just too big)?
    Thanks for any info!

  • Does Skype save older messenges in the hard disk?

    Does Skype messenger saves the dialogues in the hard disk of my computer. Some financial companies are in doubt it saves or not...

    Go to the Finder - click anywhere on your Mac's desktop, and choose File > New Folder.
    If a folder appears on your Desktop then continue reading. If not, stop reading.
    Open Terminal - it is in your Utilities folder and looks like this
    You can find Terminal by using the Finder's Go menu and choosing Utilities, then double-click the Terminal icon.
    Copy (drag or triple-click to select the line) and Paste the following commands into the Terminal window, each one followed by the Return key:
    mkdir ~/.Trash
    If you get the message "File exists" you can ignore it.
    Next Copy and Paste the following line, followed by the Return key:
    sudo chown $UID ~/.Trash
    This time Terminal will ask for your Admin password - the same one you use when you log in to your Mac. Type it and then press the Return key. What you type will not appear, not even with •••• characters.
    Next Copy and Paste the following:
    chmod u+rwx ~/.Trash
    To summarize the above you will be doing this:
    Last login: Wed Feb 12 03:21:53 on ttys000
    Johns-iMac:~ john$ mkdir ~/.Trash
    mkdir: /Users/john/.Trash: File exists
    Johns-iMac:~ john$ sudo chown $UID ~/.Trash
    Password:    (type your password then press Return)
    Johns-iMac:~ john$ chmod u+rwx ~/.Trash
    Johns-iMac:~ john$
    You will be typing the entries in red exactly as shown.
    Quit Terminal.
    Drag the empty folder you just created to the Trash, confirm that it appears in the Trash, and that you can empty the Trash without requiring your password.

  • Boot camp win7 32bit does not show hard disk drive of OSX 10.7 with the result I am not able to open Mac book os.

    I have MacBook 10.9, where in I have loaded win7 32bit in Boot camp.In win explorer the hard disk drive of MacBook of 132gb is missing. I am not able to use OSX10.9.When I insert MacBook CD it asks for fresh installation.How to recover partition of hard disk drive of MacBook in win7?

    have you tried to reboot and hold in the option key so you can the boot menu where you can choose to boot into osx?

  • Getting the hard disk error window while turning on

    i had put one cd on my laptop ....
    and after that i was playing games and laptop hang .....
    i opened task manager but it does not work..
    so i press the power button.......
    ....now i am getting the window with hard disk error which i cant diagnos..
    .........plz help me.....

    The hard disk error pretty much means what is says. We would like to know the model of the laptop and Windows version, but assuming it is a Windows 7 machine tap F10 as you power on and see if you can do a full hard drive diagnostic. If it is Windows 8 you would tap F2.

Maybe you are looking for