Boot camp win7 32bit does not show hard disk drive of OSX 10.7 with the result I am not able to open Mac book os.
I have MacBook 10.9, where in I have loaded win7 32bit in Boot camp.In win explorer the hard disk drive of MacBook of 132gb is missing. I am not able to use OSX10.9.When I insert MacBook CD it asks for fresh installation.How to recover partition of hard disk drive of MacBook in win7?
have you tried to reboot and hold in the option key so you can the boot menu where you can choose to boot into osx?
Similar Messages
-
Error: The Boot Camp partition "/dev/disk0s3" used by Hard Disk 1 is not supported.
I installed Lion a couple of weeks ago, and had Parallels 5 installed, but it would no longer run. Unfortunately, I spent the money to upgrade to Parallels 6 prior to seeing the advice to get Lion to run with 5. Oh well. But now, it won't run with 6 either. What to do?
Here;s the error again:
The Boot Camp partition "/dev/disk0s3" used by Hard Disk 1 is not supported.You should be able to do this using the Boot Camp Assistant app. There is an option to "Restore the startup disk to a single volume". That should eliminate the Boot Camp partition without harming your Mac OS partition. Even so, make sure you back up your Mac OS X partition data before you do this, just to be safe.
Lance -
I Have a Macbook Pro that does not have a disk drive. How do I install the Adobe Photoshop Elements 11 that came with the Epson scanner I purchased. I registered the S/N and I can't find the Free download anywhere only trials.
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
I have apple macbook pro mid 2009 ... my hard disk stopped working and i had mac os 10.6.8 in it ... i bought a new hard disk drive but i didn't have my CD so i installed my friend's mac os 10.5.8 in the new hard disk ... i want to get my previous 10.6.8 back ... hope there is a way to do so
Upgrading to Snow Leopard
You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s MobileMe service; fees and
terms apply. -
I have read a number of articles about how to transfer a complete Time-Machine backup to a new (larger) hard disk-drive. Some of these articles are specifically for OSX10.6 users, which are not applicable to me since I am operating with OSX 10.5.8.
However, I have tried several times to use the Disk Utility 'Restore' function, dragging my old time-machine volume into the 'Source:' box and my new volume into the 'Destination:' box. This works, of sorts, BUT the newly created volume on the new larger hard disk-drive remains the same size as the original volume on the old Time-Machine HDD, with no apparent way of increasing the new volume's size. So I am not really any better off:
E.g. the total capacity of my new HDD is stated by 'Disk Utility' to be 465.8 GB, of which I'm told 228.2 GB is used for the Backups.backdb folder, but only 4.6 GB of free space is actually available. Yet under the 'Partition' tab of 'Disk Utility' it tells me that there is still 236.4 GB of available space.
Does anyone know how to resolve this issue without upgrading to OSX 10.6?First, how did you prepare your new drive? See:
Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
If you plan to partition this new drive then be sure you create a larger partition for TM than your old volume.
Next, clone your old TM volume:
Clone using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4.Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive. -
Boot Camp Error "You cannot partition an external disk drive"
Hi all - I am trying to install Windows XP Pro via Boot Camp for the first time. I have all four bays of my MacPro (circa 2007) filled with hard drives. I boot off the first bay, and have a cal digit raid card that controls the other three hard drives into a RAID5 array. I believe that the raid card may be the culprit.
I am trying to install boot camp/WinXP on the first drive. I get the error in the title above when I try to run Boot Camp. I have ejected the RAID5, and I have rebooted to no avail.
I cannot wipe my first drive/boot drive clean. I just wish to partition it via BC so I can switch between XP and Mac OSX. Any guidance is appreciated.
Thanks.
TriTry removing the other drives is almost always essential with a Mac Pro to get Windows to work. Even Windows 7 doesn't understand seeing Apple GPT/EFI during install - they can be reinstalled later.
Or it could be that any hardware RAID controller also has to be removed. Like Apple's Pro RAID or ATTO FC.
Even w/o the CalDigit and just Apple GPT you would have gotten an error message.
BCA is still after all these years unable to understand and work with a Mac Pro properly. A one-trick/ one-drive only utility that is stumped when it runs into a dual drive setup. Which way why I gave up on using Mac Pro for dual-boot and built some PCs just for Windows 7. I install Windows on PC, then transfer the drive to Mac Pro and it works just fine!
Xserve RAID Card: Boot Camp does not support RAID configurations
Xserve RAID Card: Boot Camp does not support RAID configurations ... Boot Camp does not support the installation of Windows onto a Mac using hardware or software RAID (Redundant Array of Independent Drives). This includes Microsoft Windows built-in software RAID as well as the Mac Pro RAID Card.
http://support.apple.com/kb/HT2855 -
i am using for first time the time machine and an external hard drive because I want to erase my macbook and start from zero files. Am i keeping my files in the portable hard disk when I will connect it again with the macbook or the time machine will erase all?
I would like to know if after I erase all my data, empy hard drive inside the macbook, the time machine will erase all my files that I have saved in my "WD "My passport" external hard driveWelcome to Apple Support Communities
Time Machine has to erase the external disk in order to make backups. Before setting Time Machine up, copy the files of your external disk to the hard disk of the Mac in order not to lose them, and then, set up Time Machine. The first backup will start automatically.
If you want more information about Time Machine, read the Pondini's site > http://pondini.org -
Intel Xserve will NOT boot from hard disk drive
I have two Intel Xserves 2.0 QC machines
I have tried to re-install version 10.4.11 OS (don't ask) onto a Hard disk drive that is in a Disk drive caddy and inserted in the machine.
When booting from The installation DVD media
The disk is seen by the "Disk Utility" (the disk is partitioned as GUID boot) and the installation proceeds to the disk.
Once the first pass of the installation is complete and the system reboots, the system shows the folder and ? mark.
If I boot and hold "ALT" key to view all avaialble boot options the Hard Disk Drive does NOT appear as valid boot disk.
It does show, the still inserted Installation DVD.
I CAN boot from an external firewire drive and the Hard disk drive is visible to the OS once logged in.
I have tried different caddy postions (left, middle and right)
I have tried bona fide Apple supplied Disk drives
I have tried various different caddies
I have tried installing Operating System 10.5.* and 10.6.8 server
I have run SMC reset and system reset
But still I cannot boot off from any Hard Disk Drive inserted in a caddy at the front of the system.
Has anyone seen this behaviour?
Is it fixable?
Do I have replace something like the Hard Disk Drive back plane circuit board? Or even the main logic board?
I have now run out of ideas and cannot find any help in discussions or just googling.
ANY help would be very appreciated
Regards
TonyAntonio Hi !
QC = Quad core or QX as it is written on the "pull out" serial number tab at rear of system
I have 3 late 2006 Intel xserves
On my intial posting I declared 2 were 2.0 machines - when I was trying to be concise
2 of the macines are 2.66 systems and 1 is 2.0 system - all are QX machines
the 2.0 and 1 of the 2.66 will NOT boot from the ADM and disk inside the system - whereas the other 2.66 system will.
I have many different Caddies and these have different product/model number labels
603-9965
603-9545
603-9796
these are marked "intel SATA"
The 80Gb was only one of the drives tested - I have used Seagate 400Gb 750Gb and 1Tb - all of which have been used in systems at one time or another
and as I said the drives ARE visible once the operating system (either installation DVD or external firewire are booted from) - they are just NOT visible when the system is searching for boot media.
Thanks for the guide - I will look through that and continue to try and find an answer -
I have MacBook wherein ios 10.9 is loaded. In boot camp I have installed win7 32bit.Earlier it was showing the hard disk drive of Mac.Now it has disappeare, with the result I am not able to operate Mac. pl help
Hi som005,
I apologize, I'm a bit unclear on the exact issue you are describing. If you are having issues booting back into Mac OS X after installing Bootcamp and booting to Windows 7, you may find the following article helpful:
Startup Manager: How to select a startup volume
http://support.apple.com/kb/ht1310
Regards,
- Brenden -
I have a Hard Disk 1 (301) error message, when turning on my laptop. It says something along the lines of "the hard disk has detected an imminent failure".
My laptop is a HP Pavilion G7-1033cl (windows 7), purchased in 2011, so it's out of warranty.
As far as a noticed in some other answers, I shoul replace the hard-disk for sure.
Ok, my question is: What kind of hard disk shoul I buy for replacing it? What's the best recommended?
Thank you for your help!
GStoicuWhenever the Hard Disk fails with an error Hard Disk 1 [301] that indicates that the Hard Disk Drive has failed and that requires a replacement to resolve the issue
This issue could be due to Application or driver conflicts, virus issues, file corruptions due to incompatible applications, improper shutdowns, update failures due to conflicts, sudden power surges, if notebook is dropped etc..
HP will provide a replacement Hard Disk Drive if the Notebook warranty is Active, If not you need buy a SATA Hard Disk Drive from a retail shop nearby
Please make sure you are getting at least equal capacity as the original one in order to use Recovery Disks. If you need you can buy a larger, but not smaller capacity Hard Disk Drive. For example if you have a 500GB Hard Disk Drive you can upgrade it to 750GB Hard Disk Drive but not 320GB Hard Disk Drive
Please try the below shown troubleshooting steps once:
Step 01. Remove the battery and unplug the AC/Power Adapter
Step 02. Press and hold the Power button for more than 30 Seconds
Step 03. Plug in the AC/Power Adapter (leave the Battery out for now)
Step 04. Press the Power button and check if the Unit works normal
If the above mentioned steps does not help, then you can try reseating the Hard Drive on your Notebook
If the issue persists again please Contact HP if your HP Notebook is under warranty, HP would replace the Hard Disk Drive and provide you a Recovery media to restore factory operating system after replacement (if you've not yet created Recovery Discs/USB Media)
Note: Back up all the personal data to an external drive if it's possible. Otherwise you could connect the failed HDD via SATA to USB adapter with another PC or same PC after replacement of HDD & re-installation of OS and try copying /recovering the files. You can also refer to the below shown link for further support
http://www.wikihow.com/Recover-Data-from-the-Hard-Drive-of-a-Dead-Laptop
Please click on the link In order to Identify, Prevent, Diagnose & Recover from Drive Failures on HP Notebook Hard Drives & Solid State Drives :
http://h10032.www1.hp.com/ctg/Manual/c02876562.pdf
You can Check your warranty Here to verify the status and Click Here to order a new Hard Drive
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP -
I have and external Hard Disk Drive that i attach to my TC , and i could not access the external Hard drive from my macbook , Could Somebody help me with the question ? Should i Reset and begin to creating new network again from scratch ?
Sorry guys , i might not type it very clear , so i'm gonna type it one more time with details. I have Macbook X 10.4.11, and i just bought time capsule. i Tried to attach my Maxtor External Hard Disk Drive to my TC in order to access it thru Time Capsule, and im having a difficulties to do that. Thx For Any Advice/comment.
-
How to save iPhoto file in a separate portable hard disk drive?
How to save iPhoto file in a separate portable hard disk drive?
You want to move the iPhoto Library?
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD -
Upgrading Hard Disk Drive of Lenovo THINKPAD T500 2055 ?
Hi there,
My personal laptop is Lenovo THINKPAD T500 2055, and its main specifications as follows:
- Intel Core 2 Duo processor T9400 (2.53GHz 1066MHz 6MBL2).
- 8 GB DDR3 SDRAM Memory Module 4 GB (2 x 4 GB) 1066MHz DDR31066/PC38500 DDR3 SDRAM SoDIMM Kingston
- ATI Mobility Radeon 3650 with 256MB.
- 160 GB Hard Disk Drive, 7200rpm.
I really need to upgrade the Hard Disk Drive to a bigger size (500 GB, 7200 rpm). and, my major questions are as follows:
* Could you please advise me on which Hard Disk Drive (500 GB, 7200 rpm) should I buy for my T500 laptop?
For example, I found (http://www.amazon.com/gp/product/B003NSBF32) But I have no idea what T500 supports and what it doesn't... Therefore, I need your help to guide me about this matter. In other words, How do you know if ABC-Hard Disk Drive fits with T500 and XYZ-Hard Disk Drive doesnt fit? What is the clue in knowing what T500 accepts?
My another question is:
* How easy is it to remove/replace Hard Disk Drive in Lenovo ThinkPad T500 ???
I already watched CRU Removals/Replacements on (http://www.lenovoservicetraining.com/ion/R61_T61/index.html), But the clip is for ThinkPad R61 and T61. So, Could you please help me how to handle it with T500 ?
I would greatly appreciate your inputs.
Thanks for your consideration of my request, and I very much look forward to hearing from you soon !
Solved!
Go to Solution.Hi and welcome to the forum!
Any SATA drive that is 2.5'' wide and 9.5mm high will work in your T500. The drive you linked to meets the requirement and thus will work.
For removal and installation instructions, have a look here:- http://www-307.ibm.com/pc/support/site.wss/migr-71568.html
Hope this helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel -
I have an iphone 5s and when I make a playlist on itunes for music videos and sync my iphone the playlist does not show up. What can I do to fix the problem?
Version 11.1.5.5 of iTunes was just released today. If you update to that, does that help with the recognition troubles?
http://www.apple.com/itunes/download/ -
External hard drive seagate 3.0 cant read and not showing in disk management.
Why my external hard drive seagate 3.0 cant read and not showing in disk management, while 2.0 can read. please help me to solve it. BIG THANK YOU..
Hi,
Yes, like Vegan said, you should check if your Seagate hard drive if it could available in USB 3.0 port. This is hardware related.
Karen Hu
TechNet Community Support
Maybe you are looking for
-
Hello, I am exporting from InDesign to a PDF and the page is larger in the PDF then others I have exported. Is this because of the PDF presents? One of the project managers is not able to print it out on 8.5 x 11 paper, but the document presets for I
-
Hello peoples, hope you're all well this fine Saturday. Basically, i bought an iMac G5 not so long ago, and it's running like a dream. Now, i've got a lot of files on my old iMac that i'd ideally like to bosh onto my ex-HD (an 'Icy Box') yet when i p
-
Can Flash Player be installed on an external hard drive?
I have this game I am trying to install on an external hard drive that requires Flash Player and even though it is installed on my computer the game keeps popping up with Flash Player is required for this install. Would you like to install it now? Is
-
hi experts can u send me the blogs of file 2 -doc with bpm (bpm collect pattern etc) and user defined functions in file 2 idoc
-
Help required on Brodcast messages to logged on users in Portal- Weblogs
Hi All The link to the weblog is Brodcast messages to logged on users in Portal(Part1) My doubts is 1) Whenever user refreshes his/her page the popup gets displayed. User might get irritated everytime he will referesh the page. 2) When does the data