Does Self-Paced Learning require the Enable Navigation?

Good morning.
I'm working with multiple Cap4 generated swf files aggregated into one swf/html project incorporating the Self-Paced Learning feature (in the TOC). After I published the project, I opened it & went through a few slides, then closed the project. The Resume feature would not work, so I selected the Enable Navigation feature along with the Self-Paced Learning feature, and now the Resume function works! Is this a bug? Is it possible for me to get the Resume feature to work without enabling Navigation? I have to control the sequence my audience takes in my project, so enabling Navigation is not desirable. Implementing an LMS is not possible in my circumstances.
Captivate 4
AS2
FP10
published (chapter) files= swf/html
published project file= swf/html
LMS=none
Vista Ultimate working (locally) in XP sp2 compatible mode
Project Titles=Project Names, no spaces
Your help & suggestions will be greatly appreciated!

Hello Astrid,
Too bad that each LMS has different reactions, are you sure it has this functionality. Here only the tips that are clear.
In the LMS Customization settings, check that 'Never send Resume data' is unticked.
You can turn on Self-paced learning in the TOC, but this is not a functionality about transmitting data to the LMS, it will store a cookie on the PC to have the user get back to the place where he left previously.

Similar Messages

Self paced learning does not work properly in lms

I made a course and I want learners to go back to the point they last visited when returning.
The page last visited is remembered (It is stored in our database) but it is reset to 0 when the course is opened again.
I've tried al possible combinations in self-paced learning and 'resume data' in the quiz options.
In all combinations the page is remembered but set to 0 when the course is opened again.
What can I do to make sure the course does not reset the 'last page visited'.
I'm using Captivate 5 / and a internal lms we made ourselves.
The quiz reporting settings are:
The reporting option is enabled
Standard AICC
Complete/incomplete
Percent
Quiz results and slide views
Report score
Astrid

Hello Astrid,
Too bad that each LMS has different reactions, are you sure it has this functionality. Here only the tips that are clear.
In the LMS Customization settings, check that 'Never send Resume data' is unticked.
You can turn on Self-paced learning in the TOC, but this is not a functionality about transmitting data to the LMS, it will store a cookie on the PC to have the user get back to the place where he left previously.

TOC Self-Paced Learning

Captivate v5.5
I am trying to test the Self-Paced Learning option on the TOC.
I have created a CBT with a TOC and have selected the Self-Paced Learning option.
I run the project (F4) and stop it after 3 chapters. I look at the TOC and there are the required green ticks on the TOC for the first 3 chapters - all fine so far.
Then I run the project again (F4) but the project starts from slide 1 and the ticks are no longer visible.
Will this option only work once the project has been uploaded to our LMS or am I doing something wrong ?
Thanks in advance,
Noel

Actually, the Self Paced Learning option is of no use at all if you have published your project with settings to report to an LMS. It can only be used when Quiz Settings > Enable Reporting for this Project is deselected.
When publishing for an LMS, Captivate always assumes you will be using Resume Data bookmarking, NOT Self Paced Learning bookmarking.
However, although Resume Data Bookmarking is designed for LMS integration, it does not update the Captivate TOC markers on subsequent user sessions as does Self Paced Learning.
It's one of those nice little Catch 22 situations...

Aggregator V.5 self paced learning not working

. I have 11 individual projects that I have combined into one aggregated file. When I run the aggregated file, the self-paced learning is not working correctly. Here is what I know:
Captivate 5, WIN 7, Chrome browser. Clients choice of Captivate version.
Client is not using a LMS
All 11 projects have the “self-paced learning” checked in the TOC.
I have published all 11 projects and they run fine. I can exit the browser while they are running and restart each project. The box displays, “Continue from where you stopped last time?” and I can either resume or start over.
For each of the 11 projects, here are some settings:
In >File>Publish settings>Project>Start end> Autoloader is checked
In >File>Publish settings>Project>Start end> Autoplay is checked
In >File>Publish> eLearning output=disabled
In >File>Publish>ActionScript Version=AS3
I have republished all individual projects, and also checking the “Force republish all the slides”.
Cleared the browser cache
All 11 individual projects (.swf and .html), the .js file as well as the aggregated file(s) (.swf and .html) are all located in the same folder on my hard drive. They are close to the top of the naming hierarchy.
Client wants to be able to use self-paced learning in the Aggregated files to allow the learner to resume where they left off as well as starting over. I start the aggregated file, let the slides run for a bit and then stop, exiting the browser. I return to the location on my hard drive and click the .html file name. I am returned to the aggregated file at the very beginning and not given the option to start where I left off. I have checked each of the projects persistanceInfo.sol. Among the oddball characters, the wording "don'task" appears, but I am not sure if some of the characters are indicative of the "Don't ask" box being checked or not. I have reviewed each of the projects in the aggregated file. On each and every occasion, when I close and reclick the link, I am presented with the dialog box asking if I want to continue where I left off. Clicking ok allows the project to resume where I left off. Clicking cancel restarts the project at the beginning.
Additionally, I have made sure that the target file location is listed on the Global Flash Security settings as a trusted location.I have uploaded the files to a web server on our company site. Running the file from there provides no additional benefit-I get the same results.
Thoughts?
Thanks
Jim

All slides in the presentation are marked as continue. I have gone
through the first 5 slides and when I refresh the browser or exit out of
Internet Explorer and open the project again it just starts at the
beginning.
Brenda
From:   Lilybiri <[email protected]>
To:     Brenda Dersham <[email protected]>
Date:   01/25/2011 08:33 AM
Subject:        Self-Paced Learning - Bookmark not
working in Captivate 5
Hello Brenda,
How did you check: after uploading to a LMS?
You have to be aware of the fact that a slide will be marked as 'viewed'
only when the playbar has played the whole slide till the end. If you do
pause slides with a click box, button, TEB and attach the action 'Go to
Next slide' or something similar instead of the default action 'Continue'
this will not happen and the slide will not be marked as completed.
Lilybiri

Synching Issues with Self-Paced Learning and Embedded Flash Files

Hi Everyone,
I'm having some issues with my files not properly synching or displaying when Self-Paced Learning is active.
Here is my set-up:
Captivate 5
5 separate Captivate files combined using the Aggregator
Each Captivate file is about 15 slides
Each slide contains an audio file (for closed-captioning) and a single SWF file - the content is all created with Flash and then inserted into Captivate using Insert > Animation
Each SWF file is back 1/10 of a second from the beginning of the Cap timeline (otherwise there are rewind issues when the user selects the slide they are currently viewing from the ToC)
Each embedded SWF has the beginning and ending fade built into it; Captivate is not doing any fading
Synch to Project is selected for each embedded SWF (although it doesn't seem to work all the time)
Self-Paced Learning is active, as well as, Enable Navigation
It is not being loaded to an LMS or using any built-in Captivate quiz features. These are instead custom built AS3 Flash files that are embedded.
Windows 7, 4GB RAM, 1GB Video Card, High-end Processor, etc... a beast.
The Issue:
When the user opens the course, views it for a while and then closes it and returns it will display the first slide of the course for a moment before jumping to the bookmarked slide. This slight timing misstep causes the bookmarked slide to get out of synch. It will sometimes not display the bookmarked slide at all or it will cut-off a small bit from the end of the slide (even with Synch to Project active). It sometimes works fine but randomly will break. The course is set to 100% preload and nothing is being loaded from an external location. It seems to work fine until Self-Paced Learning is activated.
I don't think this is a common development approach for Captivate but it has been very successful with some clients. Has anyone encounted similar issues or does anyone have some suggestions that might resolve this problem?
Thanks!
Greg

It's been mentioned many times on this forum that nesting Captivate SWFs inside other Captivate SWFs gives rise to all kinds of strange issues. Captivate was not designed to work this way. If you choose to do it, and you encounter issues (as you have done) there's usually NOT a lot you can do. There are just too many ways the SWFs can get into bun fights over which one does what.
I suggest you rethink your approach to avoid nesting.

Self-Paced Learning - Bookmark not working in Captivate 5

I followed the directions of adding a Table of Contents to one of my captivate projects and selecting Self-Paced Learning in order to create a bookmark but this does not work. I have saved it as Adobe Flash 9 and Adobe Flash 10 but I am not getting the message about starting where I left off when either refreshing the browser or exiting and going back in. What am I missing?
Thanks for your time,
Brenda

All slides in the presentation are marked as continue. I have gone
through the first 5 slides and when I refresh the browser or exit out of
Internet Explorer and open the project again it just starts at the
beginning.
Brenda
From:   Lilybiri <[email protected]>
To:     Brenda Dersham <[email protected]>
Date:   01/25/2011 08:33 AM
Subject:        Self-Paced Learning - Bookmark not
working in Captivate 5
Hello Brenda,
How did you check: after uploading to a LMS?
You have to be aware of the fact that a slide will be marked as 'viewed'
only when the playbar has played the whole slide till the end. If you do
pause slides with a click box, button, TEB and attach the action 'Go to
Next slide' or something similar instead of the default action 'Continue'
this will not happen and the slide will not be marked as completed.
Lilybiri

Self paced learning/quiz/HTML5 issue

Back again! My current project has self paced learning in place. We definitely want the student to be able to return to their last spot if they exit. This works fine throughout the whole course in the swf and html5 versions, until the quiz. The swf version functions correctly in the quiz, and returns you to where you last exited. In html however, if you select "OK" upon relaunch, it takes you to the beginning of the quiz. "CANCEL" takes you to your last (quiz) slide. In both instances, the quiz submit button does not function and you cannot navigate.
I've tried numerous setting and have had zero luck fixing this issue. Any ideas would be appreciated because the client does want to keep self paced learning.
Thanks,
Ryan

Hi Ryan,
I have a question regarding your post. I have a quiz (created in Captiave 7) and I can not get the quiz to return to where I exited in the swf. How were you able to do that? Are you using an LMS? Are you using the Quiz Results slide? If so, what settings?
I have Self Paced Learning checked (in the TOC Settings) and I have a slide after the Quiz Results slide that closes the project (Project > Start and End > Project End Options: Action: Close Project) and whenever I try to go back in, I go to this slide that automatically closes the project.
On thing I was told on the forum is "Self-paced Learning bookmarking is disabled as soon as you turn on LMS reporting." Again, I'm not sure if you're using an LMS but that was something I did not know.
Thanks,
Peter

Self-Paced Learning

Hi,
I would like to remove the pop-up message "Continue from where you stopped last time?"; however, even though I uncheck Self-Paced Learning, it still pops up.
I am using Captivate 7.0
I am NOT publishing to a LMS
I have unchecked the Self-Paced Learning check box
My published files reside on a ftp site
Do you have any ideas?
Thank you,
Sarah

Hi Sarah,
If you have unchecked that option then it should not prompt this message.
Can you open your published output in any other browser, may be it is picking that course from browser history or cache, (if you might have published with self-paced checked earlier).
In whcih format have you published the output? .swf or HTML 5?
Have you enabled the reporting in your project?
Thanks.

Self-Paced Learning - Two learners on a PC

Hi There,
I just wanted to confirm something with the TOC and self-paced learning.
If two people are sharing a computer and each is taking the same course with self-paced learning turned on - do they share the same cookie and therefore both resume at the same place? Or if they logged into the same computer differently and used the course would there be a Captivate cookie for each separate login?
Thanks in advance!

Thank you - that is what I thought but just wanted to check because I couldn't find it documented anywhere.
Thanks so much!

Why does traditional NiDAQ SCAN_Start() require the count parameter?

I would like to continously monitor 11 analog inputs for 80 seconds with a 2KHz sampling frequency using a 6025E DAQ and NiDAQ 7.1
I am using the SCAN_Start(...) function.
I set my SampleRate to 2000.
I want a Scan Interval of 0. What do I set my ScanRate to? I tried to set my ScanRate to 1000, but received error -10092.
- Tree

Hello Tree,
The terminology for sampling can be confusing, so first let me define a scan, sample rate, and scan rate. A scan is a set of samples, one from each channel on the list. The sample rate is the rate at which each channel in the scan is sampled and the scan rate is the rate at which one particular channel is sampled, or how often all the channels are sampled. So, if you are only scanning one channel, the sample rate will equal the scan rate.
With that in mind, for multiple channels, the sample rate must be faster than the scan rate. You have done this, however you are not taking into consideration all 11 channels. The sample rate must be large enough so that all the channels can be sampled within one scan period. So, you can either incr
ease the sampling rate or decrease the scan rate. For more information on error -10092 and sampling terminology, look at the KBs linked below.
http://digital.ni.com/public.nsf/websearch/4F80AACDFB3B0B8586256E2300750D9A?OpenDocument
http://digital.ni.com/public.nsf/websearch/DBE7AC32661BCF9B86256AC000682154?OpenDocument
I hope this helps.
Regards,
Jyoti F
National Instruments
Applications Engineer

Does an iphone 4 require the iOS7 update?

Struggling to get my phone to update to iOS7.06 or to determine if it needs it at all.
I've dowloaded it several times and have thought that it installed but when I go to Settings>General>About it still list 7.04 as the current version of my software. I wanted to ask Apple for guidance but they deem that question to be a $19.95 service charge. Can you guys help me save a Jefferson?
Thanks

That's not what "all of us recommend". In fact, most of us highly recommend updating to iOS 7.0.6 since it fixes a critical security flaw.
These are technical support forums so what you will see are posts from people with problems. The many people who have had no problems have little reason to post here, so the posts you see are naturally going to be skewed to those for whom all has not gone smoothly. Trying to judge the quality of a product or update in these forums is like trying to judge the health of the people in your city by only looking at the emergency ward.
Regards.

Abobe Self Paced Training

Will your "Adobe Audio and Video Online Training Library", "After Effects® 7.0: Working with Layers" give staff the skills they need
to edit the CCTV footage to blur/mask out a feature in the footage?
I need to get some training for our CCTV section to enable them to use After Effects on CCTV footage to blur images.
I want to know if any of the standard Adobe self paced learning products will be suitable - I have sent a letter direct to Adobe, they have pointed me to this forum.
Please let me know your views.

If you're just looking for standard "face blurring", there really isn't anything difficult to learn if you use COP BLUR. Just move the effect so that it follows the area of screen you want to blur out.
Of course, there are several other ways to do it, but the COP BLUR plugin is easy if you're just looking to blur images.
COP BLUR is in the delirium package
http://www.digieffects.com/products/delirium.html

Can we change offereing from learning under the Content Tab

Dear,
We had offered a course and people attended the class, in which some got passed or failed. Now my question is that can we change the offerting name with new one which training has already been done by using updating/Creating Button over there.
Suppose, Offereing Done with 'Oracle HRMS Learn' but we have create a new offering "Oracle Learning Manger" and want to replace it with new one. will effect the record or now issue.
Thanks.

Hi!
I'm not sure if I understand your question exactly, but here are some suggestions that I think will help:
The easiest way to modify the Offering for an existing Course once it has been created is through the Catalog tab and not the Content tab. Based on your question, however, it sounds like your best approach may be to create a brand new Course instead because the subject matter is different from your first Course.
As a best practice, your Offering names should be consistent across all of your Courses and they should match the delivery mode of the training so that your Learners know what to expect when they choose a specific Offering. For example, if you have an "Oracle HRMS Learn" Course, you would have an Offering underneath it called "Online Self-Paced Training" (or something like that) and a Class called "Oracle HRMS Learn." This way, if you ever want to offer this Course using a different delivery mode, you could create a new Offering under the course (i.e., "Instructor-Led Training") and it would be easy for your Learners to decide how they'd like to take the Course.
Oracle HRMS Learn
Online Self-Paced TrainingOracle HRMS Learn
Instructor-Led Training
Oracle HRMS Learn - 09-Jan-2014
Oracle HRMS Learn - 13-Feb-2014
If you have a new online Course that you'd like to offer that has a different subject, you should create a brand new Course with a new Offering that points to the online content files, and a new Class under the Offering. Then, you can copy your existing enrollments from the other Class that people have already completed to the new Class under your new Course. For example, you could create "Oracle Learning Manager" as the Course, and then have "Online Self-Paced Training" as the Offering, and "Oracle Learning Manager" as the Class.
Oracle Learning ManagerOnline Self-Paced TrainingOracle Learning Manager
The only time you'd want to change the Learning Object that an Offering points to is when you have an updated version of the same Course. For example, if your Learners took the Oracle HRMS Learn content in 2013 and then you updated the content for 2014, you could keep the same Course, Offering, and Class, and then just update the Learning Object that your Offering points to. You could then send out a message to everyone in the Class that they should re-take it (or list it as part of a Learning Certification so that renewals are tracked through OLM), and everyone that takes it in the future will see the new content.
My company has freely available "Unofficial Guides to OLM" for users and administrators that you may find useful with step-by-step instructions and best-practice recommendations. Here's where you can download both guides:
Unofficial Guides to Oracle Learning Management (OLM)
I hope this helps!
Anne
Anne Saulnier | Synergy Codeworks, LLC
www.synergycode.com

Error 1074395241: The template descriptor does not contain data required for rotation-invariant matching.

Hello all,
I am using the IMAQ Match Pattern 4 to detect the rotation angle of a template image. However, it shows the error: "Error 1074395241: The template descriptor does not contain data required for rotation-invariant matching." What is the problem exactly? How to solve this? The details are explained below.
My project is a little bit complicated. Part of the block diagram containing the IMAQ Match Pattern 4 is shown below:
The source image is a series of frames of images read from an AVI video (I used a for loop to process the images frame by frame). The template image is a selected region of the first frame. So it means, the user selected the object of ineterst in the first frame of the video, and in each of the following frames, we need to find the matched object of interest & determine its rotation angle. When I run the block diagram shown above, it does not have any error. However, it shows the rotation angle as zero no matter what it "really" is. Therefore, I changed the block diagram by adding the parameters, shown below:
But in this case, when I run it, it shows the error that I have indicated in the subject line.
If you need more details about my project to identify the problem, please let me know.
Thanks in advance.
Solved!
Go to Solution.

-Please go through pattern matching example which comes along with labview fiirst
Go to labview Help>>Find Examples and you can search for example.
-You have create template with angle range and what type of pattern matching you want use.
-For this you have to use IMAQ Learn Pattern before using IMAQ Match Pattern 4
Refer :http://zone.ni.com/reference/en-XX/help/370281U-01/imaqvision/imaq_match_pattern_4/
Thanks
uday,
Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
Certified LabVIEW Associate Developer (CLAD) Using LV13

Does using Group Policy Preferences to deploy printers require the print driver to be pre-installed?

I'm trying to prepare our school system for Windows 7 (we currently use XP). I would like to use the new Group Policy Preferences method of deploying printers. I pushed out the XP client side extensions through WSUS. In my test environment, I added the shared printer in group policy preferences. My XP machine had the printers show up automatically, but my Windows 7 machine did not. I realized that I had previously connected a printer of the same type to my XP machine before and the drivers were already installed. To test this theory, I manually connected the shared printers to the Windows 7 machine, deleted them, then logged off and back on. Now the printers are showing up from group policy. My question is does using group policy preferences to deploy printers require the print driver to be pre-installed? If not, then what am I doing wrong? If so, is there a way to work around this? Thanks for your help.
EDIT: To clarify, I am using the share method in GPP. This is the error message I get in the event log:
The user 'PRINTERNAME' preference item in the 'win7 printer test {946461A1-27F8-406F-A0B3-0A1A05AF34F6}' Group Policy object did not apply because it failed with error code '0x80070bcb The specified printer driver was not found on the system and needs to be downloaded.' This error was suppressed.

This link have a description of resolution:
http://technet.microsoft.com/en-us/library/cc725938.aspx
Open the GPMC.
Open the GPO where the printer connections are deployed, and navigate to Computer Configuration, Policies, Administrative Templates, Control
Panel, and thenPrinters.
Note
The Point and Print Restrictions setting can also be found under User Configuration\Policies\Administrative Templates\Control Panel\Printers.
This policy is ignored by Windows 7 and Windows Server 2008 R2, but is enforced by earlier editions of Windows including Windows XP with SP1, Windows Server 2003 with SP1, and Windows Server 2008. We recommend that you change
this policy setting in both locations so that all down-level clients have a consistent experience.
Right-click Point and Print Restrictions, and then click Properties.
Click Enabled.
Clear the following check boxes:
Users can only point and print to these servers
Users can only point and print to machines in their forest
In the When installing drivers for a new connection box, select Do not show warning or elevation prompt.
Scroll down, and in the When updating drivers for an existing connection box, select Show warning only.
Click OK.

Does Self-Paced Learning require the Enable Navigation?

Similar Messages

Maybe you are looking for