Does the ipod nano 7th gen work with Belkin Blue tooth In car hands free? Customer support said it did when I bought it, but the box doesn't say it does and I dont want to open it in case I have to return it.

Does the ipod nano 7th gen work with Belkin Blue tooth In car hands free? Customer support said it did when I bought it, but the box doesn't say it does and I dont want to open it in case I have to return it.

If the Belkin supports the A2DP (Stereo Bluetooth) profile then it will work.

Similar Messages

  • Does the Ipod nano 5th gen. work with the built in microphone on Skullcandy  headphones?

    I want to buy a pair of Skullcandys with a microphone in them, but it wouldnt make sense to pay the extra money for a microphone if my iPod wont work with it. Has anyone ever tried it or know if the headphones would be compatible with the iPod

    I would check with Skullcandy's support site. They should be able to provide the most accurate answer.
    B-rock

  • My IPOD 7th Generation is not compatible with my cars audio system. I had the IPOD nano 4th generation earlier and it was perfectly working on my car audio system. Is there any way i can make the IPOD Nano 7th generation compatible with my car audio syste

    My IPOD 7th Generation is not compatible with my cars audio system. I had the IPOD nano 4th generation earlier and it was perfectly working on my car audio system. Is there any way i can make the IPOD Nano 7th generation compatible with my car audio system?

    I am assuming you are using the Lightning to 30 pint adapter and it is not working?

  • What is up with the iPod nano 7th gen.  I just had a second one die. with both after only 3 weeks of useage?

    what is up with the iPod nano 7th gen.  I just had a second one die.  both after only 3 weeks of useage... both dead since Jan 10th 2013.

    this is an answer I just gave to someone else.
    i'm going to ask you to try something I just did to fix a maybe simular problem that worked..... but I don't know why yet........make sure your iPod in plugged into your computer (mine is a Mac) and iTunes is turned on. My iPod  was  also "dead" but had been plugged into my computer for a couple of hours (but not lit up in any way).  Then (in desperation) I held down all the buttons, the on/off (on top right), the small Home botton at the bottom of the face, and the volume/pause buttons (left side).  For whatever reasons my iPod came back to life in a needs restoring mode ....and asked me to restore it in the itunes like "new'  iPod connected mode.  Since I have a Mac I also had to give permission to do a download by entering my computer password. If you have to do the same have that password ready. Then it did a restore software download.  Everything previously on the iPod was erased and had to be re-synced,  but I was just thankful to get it up and restored again.
    Give this a shot and I hope it works for you.....but  why? I don't know yet, I need more questions answered.

  • Why does my lightening wire not fit the ipod nano 7th gen

    Could someone tell me why does my lightening wire now not fit the ipod nano (7th gen)?  I push it in but it seems to spring out and not fully connect. I only bought it 1 year ago and it is been great, but now I think it needs to go in the bin

    I agree, sounds like there's something in the port on the Nano. Try cleaning it out with a can of compressed air, or a gently with a wooden toothpick.

  • Does the ipod nano 7th gen support HD films?

    Can anyone advise if the ipod nano 7th gen support HD films?

    No, you can only watch SD versions of tv shows and movies.

  • Do I have to have an iTune account to use the Ipod Nano 7Th Gen?

    Do I have to have an iTune account to use the Ipod Nano 7Th Gen?

    No, you don't. You can rip music to your computer and sync it to your Nano.

  • Can't the iPod nano 7th gen. VoiceOver function identify which language that is being used? My iPod Shuffle can.

    I am very satisfied with my iPod SHUFFLE (last version), especially with the VoiceOver function which is (quite) able to  identify correctly which language is being used in every song: For a Norwegian artist / a song in Norwegian, the artist and title is pronounced in Norwegian; for a French artist / a song in French, the artist and title is pronounced in French; for an English artist / a song in English, the artist and title is pronounced in English etc. A really impressive and useful function!
    I was very surprised and dissatisfied to find that my new iPod nano 7th generation does not seem to work this way: I am able to select the language to be used in VoiceOver, but then this language is used in everything that is pronounced. Most of my music is in English language, so this is what I have selected. But to hear Norwegian artists' names and Norwegian titles pronounced with an English-speaking voice is quite disturbing.
    I believe I have been through all possible settings in the nano and in iTunes to correct this, but I am unable to find a solution. I have also asked people at an Apple store, but they were unable to help. Can anybody help? Or is it really possible that this excellent function has been removed?
    (Could it be that the previous version of iTunes could fix the problem? I have installed the last one, v. 11.0.1.12.)

    Hello, Dlira. 
    Thank you for the question.  The articles below may help you with the VoiceOver issue you are experiencing. 
    iPod: Selecting a VoiceOver language for individual songs
    http://support.apple.com/kb/HT3494
    iPod nano (6th generation and later): How to use VoiceOver
    http://support.apple.com/kb/HT4317
    Cheers,
    Jason H. 

  • Does anyone else believe that the ipod nano 7th gen could use a calculator app?

    is there anyway to get the calculator function on the 7th gen ipod nano?

    You could make a feature request, if you like. Here's a link to the nano product feedback form:
    http://www.apple.com/feedback/ipodnano.html

  • Why does my iPod Nano no longer work with JVC TH-BC3 dock?

    I have a JVC TH-BC3 soundbar with a built-in iPod/iPhone dock.  My iPod now displays a "non-compatible" message on the screen when I when docked in the TH-BC3.  What is the problem?

    I sent the question to JVC's support desk and they sent the following reply -
    Thank you for contacting JVC Customer Care. My name is Veronica, your email care specialist. We value you as a JVC customer and appreciate the opportunity to be of assistance.
    I understand you are experiencing difficulties with your JVC TH-BC3 recognizing your iPod Nano. We do apologize for any inconvenience that this may have caused. What generation is your iPod Nano? By any chance have you recently updated the iOS? If so, it may just require a soft reset. Simply press and hold the Menu and Home button until the Apple logo appears. This will not erase any information on your iPod/iPhone, simply reboot the software. Please make sure the iPod/iPhone is not connected to the unit while performing the soft reset.
    I performed the soft reset and tried my iPod Nano in the dock and it now works!

  • IPod nano second gen. works with iTunes 7.5, but not with iTunes 7.7

    I recently got a new computer and downloaded iTunes 7.7. My iPod would charge for two seconds then disconnect. I tried using the other computer at my home which uses iTunes 7.5 and it works perfectly. It seems like alot of people are having the same problem. Do you think Apple will fix the new version of iTunes?
    I have tried doing this : http://docs.info.apple.com/article.html?artnum=304434
    and it worked, but the next day my iPod wouldn't charge or connect. I tried doing the same as I had did yesterday to get it working, but it doesn't work.
    I have also tried plugging iPod into all my USB ports, but still no luck.
    Anytime I restart my computer and open up Services, Terminal Services is always shown as stopped. Could this be the problem?
    One last question: Could a firewall on my computer possibly be the problem?
    Thanks in advance.

    Open the file using QuickTime Player 7.6 and then open the Movie Inspector window.
    It will tell you what codecs are used or show the video track "type". My guess is that your file contains a Flash video track which will not play in QuickTime higher than 7.3.

  • Is the ipod nano 7th generation compatible with windows 8

    today i purchased a ipod nano, came home really anxious to toad it up with my favorite music, guess what, my computer does not recognize my new ipod  I am running windows 8 (which i don't like to begin with)
    Is there anything i can do, right now all i have for my 148.00 is a radio!! help
    Jacki

    it was until the last update of itunes, and many are having issues

  • How can I lock the screen on ipod nano 7th gen?

    How can I lock the ipod nano 7th gen? Just pressing the top button doesnt cut it as it still starts to play music or pauses or change volume with the slightest knock im in 2 minds to take it back if you cant lock it as ive only had it 4 days and already found this a huge problem!

    Hi! I really couldn't find no way to lock the screen, except pressing the top button (what only cancel any touch you do in the screen).
    That's an old discussion about (failure vs feature), but I wonder about if you are running, you can let the screen locked and still change or pause the song by pressing the buttons on the side of the iPod)
    hope I could help you

  • Is there a way to listen to radio on iPod nano 7th gen with Bluetooth headphones?

    I know the iPod nano 7th gen uses the headphones as an antenna. I know there will need to be some sort of antenna attached. Does anybody know if there is an antenna on the market that can be plugged into the headphone jack that will allow audio to be sent to a pair of Bluetooth headphones?

    There is currently no such antenna available.
    B-rock

  • Does ipod nano 7th gen download apps

    does ipod nano 7th gen download apps like running apps, exercise apps, etc

    No. There are no third party apps for the iPod nano 7th gen. The only apps are the ones pre-installed.

Maybe you are looking for

  • HT1349 How to format my hard disk and restart

    THis aftrnoon my system wouldn't start. a black screen with OS X utility. Now I want to format my hard disk and install  OS. X

  • Macbook air 2013 needs power button pressed for 10 seconds before it turns on?

    macbook air 2013 needs power button pressed for 10 seconds before it turns on? also I've tried resting PRAM but when i press the 4 buttons before the start up screen it never restarts again? please help!

  • Sorting Address Book?

    Is this possible? I'd like to sort my addresses by name. I see no option for sorting of any kind. Strange! I'm also trying I'm trying to "Look for Duplicates" across selected groups in the Address Book. Possible?

  • MDSYS.CS_SRS incomplete

    We are working with Mapguide5 from Autodesk, using a projection known as AZHP-CIF 'Arizona State Plains, Central Zone,International Foot'. Since this does not appear in CS_SRS I have added a row using the WKT from a file supplied by Autodesk, and ass

  • APOC daemon could not start

    Hi, currently i have a problem with apoc, the smf(5) error message is the following: [ Aug 13 09:33:34 Executing start method ("/usr/lib/apoc/apocd svcStart") ] Starting Configuration Agent ... Exception in thread "main" java.lang.NoClassDefFoundErro