Doing a search in the queue

Hi Jay,
I have a user who reported that his message was not delivered to the receipient. I checked the logs and indeed found nothing sent from him. So I thought that his email could be in the queue. I had to dir tcp_local and note the message numbers that are dated today and then do a hist of each message (and I did not find his email at the end)
Is there any command to search the queue for all emails sent from a specific address?
thanks,

If you did not find the message in your mail.log* files, then it was NEVER submitted to Messaging Server.
Messaging Server logs both Enqueue as well as Dequeue.
If you got no "E" Enqueue record, then we never saw the message. No need to search.
If we did the the Enqueue, and you wish to locate, then have a look at the
imsimta qm functions. You should be able to get a listing by addressee, or sender.

Similar Messages

  • RENAME:  When I rename a photo why can I not find it doing a search?  The photo obviously keeps its old name even though it has a new one   IPhoto 09

    When I rename a photo why can I not find it doing a search?  The photo obviously keeps its old name even though it has a new one>  IPhoto 09

    Thanks, that makes sense.  If I do a search in IPhoto I find it.  I have 6 grand children and also have had my camera for quite awhile and it starts file names over again after 10,000 pictures. (I don't have all these on the computer) but now I have some files with the same name  ie  img_4   and img_4
    Thanks again for your help!!
    HC

  • Error when doing a search in the Account Dim

    I get this error sometimes: "The member exists in NEXT...Do you want to expand?"
    It only happens in the Account dimension and when the view is ID and Description. Any Ideas? Thx.

    I've just had the same issue on my system, where I would see "The member exists in NEXT...."
    It wasn't on all dimensions, but was on most of them within one of the Applications.
    I took a note of the dimensions that gave the error and then did a Full Process on each individual dimension that was affected.
    Following that, I logged out of BPC Excel and back in.
    Once I had done that, everything worked perfectly again
    I don't know if this will resolve your issue, but good luck with it.
    Craig

  • Why does he search in the user settings for the printer?

    Hi, I created a smartform and added output and control options when the form is called.
    I read that if I assign tddest and tdprinter, and leave user_settings blank, that SAP would not go to the user settings to see if a standard printer was declared.
    But apparently, the program still goes to the user settings, as I keep getting the error: "Please maintain an output device in the user master data."
    Now I know that I can go to SU01 and create a standard printer, but that is not what I want. I want to pass the printer in the program, so that there is no need to have a standard printer defined.
    What am I missing?
    I have these options:
          output_options-tdimmed = 'X'.
          output_options-tddest = v_printer_name.
          output_options-tdprinter = v_printer_name.
          output_options-tdcopies = 1. "Just print one copy
          control_parameters-no_dialog = 'X'.
    and in the call function
      call function FM_NAME
      EXPORTING
        control_parameters = control_parameters
        output_options     = output_options
        user_settings      = ' '
    THX!

    hi,
    try this.
    output_options-tdimmed = 'X'.
    output_options-tddest = v_printer_name. <---- pass output device(4 char)
    output_options-tdprinter = v_printer_name.<------remove this
    output_options-tdcopies = 1. "Just print one copy
    control_parameters-no_dialog = 'X'.
    Regards
    Madhu

  • After updating to 4.3.5, spotlight does not search within text messages

    HI,
    I just updated my iPhone 4 to 4.3.5 and Spotlight does not search within the text of my SMS text messages any more. It only searches by the name of the SMS senders. There does not seem to be any setting I can adjust and I have restarted the phone several times but nothing changed.

    I figured out how to get it working while retaining your data. 
    Connect your phone and perform a full backup.
    Erase all data/media or restore the phone
    Select setup as a new iPhone when prompted in iTunes.  Give it some other name (i.e. "New").
    Grab a copy of iBackupBot from here http://www.icopybot.com/itunes-backup-manager.htm
    Run iBackupBot and select the new backup
    In the file list, locate the file name SystemConfiguration/preferences.plist
    Open the plist be double-clicking on it.
    Copy the contents of this file to clipboard.
    Select the full backup of your iphone under it's original name (make sure to grab the one with the latest date).
    Locate SystemConfiguation/preferences.plist 
    Scroll to the bottom and note the Hostname for your phone.
    Replace the contents of this file with the that from the "New" backup making sure to change the hostname and phone name in the last section of the plist.
    Save the changes to the plist.
    Connect your iPhone to iTunes
    Right-click on it and select "Restore from backup"
    Locate the latest backup under your phone's original name
    When it's done restoring and reinstalling your applications, you should once again have push notifications that work over the cellular network.

  • Unlocking queue will unregister the queue?

    Hi Experts,
    In SMQ2, I got an entry with sysfail, so I have moved the entry and now the queue is in ready state for long time. By unlokcking the queue, it turned into running process and all the messages got processed.
    As I am not having SMQR access, I had no chance check, whether it was registered queue or not before unlocking., but as a priority solution I unlocked and processed the messages.
    Now,I am confused, does unlocking deregister the queue if it was registered? do we need to re register the queue?
    Thanks.
    Hari.
    Edited by: Harish.k on Nov 14, 2011 5:15 AM
    Edited by: Harish.k on Nov 14, 2011 5:20 AM

    Hi Harish,
    As Raja said, there is no need to register queue once again.
    Locking the queue does not de-register the queue.
    Thanks,

  • MQ Adapter does not clear the rejected message from the queue

    Hi All,
    I'm using a MQ Adapter to fetch the message from the queue without any Backout queue configured. However, whenever there is any bad structured message found in the queue, MQ adapter rejects the message and moves the message to the rejmsg folder but does not clear it off the queue, as a result of which it keeps retrying the same hence, filling the logs and the physical memory. Somehow we do not have any backout queue configured so I can move the message to blackout queue. I have tried configuring the jca retry properties and global jca retry as well but to no avail.
    - Is it not the default behaviour of MQ Adapter to remove the rejected message from the queue irrespective of Backout queue is configured or not? The same behaviour working well with the JMS and File Adapter though.
    - Is there any way I can make MQ Adapter delete the message from that queue once it is rejected?
    Regards,
    Neeraj Sehgal

    Hi Jayson,
    Check this URL which answers a problem with com.sap.engine.boot.loader.ResourceMultiParentClassLoader problem:
    http://209.85.175.132/search?q=cache:RnFZ9viwuKkJ:https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.sdn.folder.sdn!2fcom.sap.sdn.folder.application!2fcom.sap.sdn.folder.roles!2fcom.sap.sdn.folder.navigationroles!2fcom.sap.sdn.role.anonymous!2fcom.sap.sdn.tln.workset.forums!2fforumtest!2fcom.sap.sdn.app.iview.forumthread%3FQuickLink%3Dthread%26tstart%3D45%26threadID%3D1020700+com.sap.engine.boot.loader.ResourceMultiParentClassLoader&hl=en&ct=clnk&cd=3&gl=in&client=firefox-a
    Please check that the JDK compliance level is at 5.0
    Window->Preferences->Java->Compiler->Compiler compliance level set this to 5.0
    Set the installed JRE to the one you have mentioned JDK 5.0 update 16
    Window->Preferences->Java->Installed JRE's->
    Click on the add button to select the path of your JDK.
    once completed click on the check box next to it.
    regards,
    AKD

  • Where on my Hard Drive does CometDisk store downloaded media files? No search gives the answer.

    Using CometBird's special service - Download Media Files -
    it says it downloads them to my hard drive - BUT DOES NOT
    SAY WHERE.
    And NO SEARCH gives the answer.
    Where do I find my downloaded files?????

    What a great reply! Thanks very much!!!
    I will likely move to Leopard this weekend; and next weekend move from Eudora 6.2 to Mail in Leopard (10.5.6).
    A question on sending: I really like to "QUEUE" my messages in Eudora, then send, say 5-10 all at once. Is that possible with Mail?
    Also, I like having the IN-BOX (messages rec'd), the OUT-BOX (i.e. messages sent) and a bunch of messages all on the screen at one time-- even the address book -- and then just clicking a corner or going to WINDOW to select. Is that possible with Mail - or do the screens all replace each other?
    And I guess Address Book with Eudora (where I have about 800 addresses) is going to have to be imported to Mail - but I don't think it is Mail, rather the Apple "Address Book" program which serves as the address book for Mail - right?
    I'm not looking forward to this, I must admit!
    Thanks for any comments and hints / experiences you've had--- others out there please comment, too!
    Best,
    Steve Schulte
    Friday 20 February 2009 at 13:20

  • After the update, pressing Enter no longer works to go to a URL, nor does it work in the Google Search bar thing.

    Pretty much what the question says. I updated to the latest Firefox, and now this really irritating thing happens.... It happens lots of places too. Some specific things:
    * Clicking on the address bar at all does not bring up the little flashing cursor thing, and generally gives me no indication that I've actually clicked on the URL. Same with that little google search thing in the upper right.
    * Most frustratingly, when I press enter after putting in a URL, it won't even go to the site.
    * After getting annoyed at both of those things, I try to type in something on a website, and though the URL stays the same, it starts dropping down a lot of suggestions from my history.
    * Lastly, when I'm doing my crosswords on Washington Post and I switch to a different tab to type something on there, it doesn't switch my typing thing over - it stays on the crossword, typing things into that rather than into the typing field I clicked on to start typing in.
    So, yeah, this is highly annoying, and I'd love for any help for these issues...
    I did look at the FAQs, and they said something about the AVG SafeSearch thing causing one of my problems, but I don't have that extension, so it's definitely not that!

    The AVG Safe Search extension can cause problems with the Enter key not working in the location bar.

  • Does anyone know how to do a text search in the new Safari for iPad iOS 7?

    Does anyone know how to do a text search in the new Safari for iPad iOS 7?

    The feature has been removed to make safari even less useable. You need to download a third party browser like atomic web browser to get the functionality you want back.
    Like many new IOS 7 "features", safari on the ipad is a FAIL.
    At least you can now bury safari in a folder containing hundreds of icons that you can only view 9 at a time.

  • The music search on the I tunes store does not appear after the latest upgrade to my I phone 4

    The music search feature on the I Tunes store does not appear.  Unable to search since the latest upgrade.

    If you're sure where your library is run this script iTunesXMLPath. The library folder is the folder that file is in. Your media folder is recorded under Edit > Preferences > Advanced and is usually a subfolder of the library folder.
    I recommend you backup your library with the method in this user tip.
    tt2

  • I am looking for a specific photo in my event folder, it does not show up, yet when I use the search feature, the photo is there.  Why doesn't it show up in the folder?

    I am looking for a specific photo in my event folder, it does not show up, yet when I use the search feature the picture is there.  Why doesn't it show up in the folder?

    What system and iPhoto version are you running?
    If your're using iPhoto 9 or later  Command (right) - click on the photo in the search window and select Show Event in the Contextual menu. 
    That will take you to the event where the photo is.
    OT

  • Office documents does not open in the default office application from Search Results

    1 WFE + 1 App Server + 1 server for OWA + 1 separate DB server make up our DEV SharePoint 2013 environment. We migrated many web applications from our SP 2010 environment to SP 2013 environment. Client integration is enabled and "Open
    Documents in Client Applications by Default" feature is enabled at the site collection level. OWA is enabled and working on the search results, such as showing preview.
    From the document libraries, if I open office documents like word, excel and PowerPoint, they open in the respective office applications. However, from the search results, when I try to open by clicking on the result, it opens on the browser.  I want
    OWA to show document preview but still want to open the document in the default office application. How to overcome this?
    I have IE 8.
    Thanks, Soumya | MCITP, SharePoint 2010

    Go to the bottom of the Search page, you will see a Preferences link:
    From there, you can set your preference. This is a per-user setting and as far as I'm aware, cannot be set globally.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Address bar google search does not open in the current tab

    When I do a address bar google search, the search window does not open in my current tab (which is usually a newly blank tab window), instead it opens in a previously opened tab window (or sometimes even a new tab), but never does the search appear in the current tab. When it does this, it ofteb replaces a web page which I can no longer view it without going backwards.
    The only fix I have found is to open a new tab and go to Google's web page and search from there. But, this takes extra time and I have to remember to do this. Otherwise, I might lose web pages I wish to view.
    This never used to happen until recently. I have a Mac using Lion for the past year.
    Any help would be appreciated. Thanks, Anna

    I appreciate your input, but I don't want the google web page to open in a new window.
    Instead, I want to search using the address bar in using google to open the search in the tabbed webpage I am viewing, rather than open another tabbed webpage. When it opens in a different tab from the one I am in, it either creates a brand new tab, or more problematically, opens the search in an tabbed window which has an existing webpage I still want to access for viewing.
    This is a Firefox issue. Address bar searching works as it should in Safari.

  • I just installed Adobe CreatePDF desktop printer, when I try to use from Word or Excel, it does not work.  The Adobe print queue says "error" in the status screen.  I have uninstalled and re-installed.  Any ideas of what to do next?

    I just installed Adobe CreatePDF desktop printer on a Windows 7 home PC.  When I try to use from Word or EWxcel, it does not print.  The Adobe print device queue reports an "error" in the status column.

    Adobe retired this Feb 17, 2014.
    This app sent content to and got content from the web based services of "CreatPDF" and "PDF Pack".
    These are subscription services out in "the cloud". When the app was live you had to be online and signed into your account.  The user forum for CreatePDF has a DOC that speaks to the app removal.
    Be well...

Maybe you are looking for