Domain admin permissions missing
our domain admin permissions missing and the Active directory user and computers cannot open,
also have show the error msg.
please help me.
Hi,
Would you please go to Event Viewer to see what error events were logged and keep us posted?
At this moment, I suggest that we can run Dcdiag/v command to check the health of the DC.
Regarding Dcdiag, the following article can be referred to as reference.
Dcdiag
http://technet.microsoft.com/en-us/library/cc731968.aspx
Best regards,
Frank Shen
Similar Messages
-
File sharing permissions for AD Domain Admins?
I've binded Mavericks to a Windows network with Active Directory, turned on File Sharing under System Preferences > Sharing, and added the Domain Admins group; how can I configure permissions so that the Domain Admins can read and write to and from all files and folders on the MAC HD without affecting other user's permissions?
If I "apply to enclosed items..." the Domain Admins' Read & Write permissions from the root volume then Everyone (gets unintentionally propagated) can access all files!
Ideally, the Domain Admins need the same permissions as the root administrator even after a new user has logged onto the MAC and had their Home Folders created in the future; In other words I need them to be able to access files and folders for all accounts past, present and future, but all other user's access must stay the same. Does that make sense?
Is this even possible with AD binding? Would having a MAC OSX Server/Open Directory facilitate this better?
Any help would be much appreciated!I tried adding the Domain Admins to the wheel group, but that never helped either. Also the "apply to enclose items" only seems to work for the entire share (left side)--not individual users or groups (right sde).
-
Hi,
I am trying to setup DFS replication on tow servers. I am local admin on the servers but NOT domain account. Is it possible to create Replication group anyway? or should i contact the Domain administrator to the job?
ThanksHi,
We cannot use local administrator to create a dfs replication group. By default, Domain Admins group can create a dfs replication group. You could also delegate to a user or group the ability to create replication groups and the user must add to the local Administrators
group on the namespace server.
For more detailed information, please refer to the article below:
Delegate the Ability to Manage DFS Replication
http://msdn.microsoft.com/en-us/library/cc771465.aspx
Best Regards,
Mandy
If you have any feedback on our support, please click
here .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Why can't I, a Domain Admin, see certain attributes of certain users.
I'm trying to run a powershell command that lets me figure out the last time users have set their password (on a Server 2008 R2 domain)
PS C:\Users\me> get-aduser -credential MDX\me -filter * -properties * | sort | Foreach-Object { echo "$($_.Name + "," + $_.passwordlastset)" }
My User 1,07/01/2013 08:31:17
My User 2,
Some users, this works well... I get their passwordlastset data. Other users, the pwdLastSet is not returned to get-aduser and it doesn't format it into the passwordLastSet field. I'm in the domain admin and enterprise admin groups. The other admin here
sees the field for the users I can't see but is missing some users. In the AD Users and Group console the attribute for all the users is properly formatted.
I think its permissions related, but I'm not sure why it would block me from seeing that attribute. The one thing I think may be common to all the users I can see were created by me through the GUI. The users that i can't see properly were created using
the new-aduser powershell command by a service account that has rights to create users in only one OU.
Question, any reason that a domain admin shouldn't have access to all the attributes in the directory?Thanks Isaac. What am I looking for in particular?
The user was created in the AD users and computers GUI. I then ran the delegate control wizard to grant the user create user and delete user access to the OU my users sit in.
The new-aduser command we run looks like this. I build the string below then connect to the domain controller to run it. There are no other commands run after this.
my $cmd = "new-aduser -Name \'$args{firstname} $args{lastname}\' " .
"-AccountPassword (ConvertTo-SecureString " .
"-AsPlainText \'$args{password}\' -Force ) -Enabled 1 " .
"-ChangePasswordAtLogon 1 " .
"-DisplayName \'$args{firstname} $args{lastname}\' " .
"-EmailAddress \'$args{email}\' " .
"-GivenName \'$args{firstname}\' " .
"-SamAccountName \'$args{login}\' " .
"-UserPrincipalName \'$args{login}\@$args{domain}\' " .
"-Surname \'$args{lastname}\' " .
"-Path \'$args{location}\'";
Thanks for the help. -
Domain Admins not able to run executable on Domain Servers
I have built a VM domain of Windows 2008 R2 SP1 x64 machines. One Domain controller, 4 member servers. I have built a couple users, and put them into the following domain groups:
Domain Admins
Enterprise Admins
Schema Admins
However, if I log into any of the machines as the two users I created, I cannot run, for instance, setup.exe for SQL server. I am invariably told :
"Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item."
I CAN access stuff on the Domain Controller logged in as one of those users. So all these problems only apply to the member servers.
I have checked to unblock the files (not an issue)
I have modified UAC settings through SECPOL.msc
I have confirmed that the users in question (as well as the groups above) are members of the local Administrators group on each node. The only way for me to run these programs (things like regedit also won't run either) is to log in as Administrator
(domain and local work for this)
I have removed a member server from the domain and re-added it. I did so using one of the userids that have been problematic. It added it to the domain fine, but upon reboot, that userid had effectively no rights on the box.
I have no idea what the problem is. I can't even elevate a command prompt to administrator - it gives the error above.
I built this system for some exercises and testing for a cert test I am taking. If I can't get these (or any other) accounts working, I am kinda stuck.
Any help would be great, because none of this makes sense.
Thanks,
ToddHi,
Would you please check the below article and try the suggestions in it:
"Windows cannot access the specified device, path, or file" error when you try to install, update or start a program or file
http://support.microsoft.com/kb/2669244
Regards,
Yan Li
Regards, Yan Li -
Premiere and Photoshop CC Crashes at launch on a Domain Non-Domain Admin Computer
On Windows 7 Domain computer lab as a non domain admin but local admin, program launches and then closes with the error codes below. As domain admin account, it works fine. This is a K12 education institution, so giving student's domain admin status is unacceptable. Please advise, any help is greatly appreciated.
FYI, things i have tried:
Integrated graphics cards, I have uninstalled and re-installed drivers. No luck. I have also made the pslog.txt file and given appropriate permissions to all users.
Error Codes:
Windows Error Code - Application error
Faulting application name: Adobe Premiere Pro.exe, version: 8.0.1.21, time stamp: 0x53c7b17f
Faulting module name: dvaui.dll, version: 8.0.1.21, time stamp: 0x53c76970
Exception code: 0xc0000005
Fault offset: 0x00000000002f4e39
Faulting process id: 0xf28
Faulting application start time: 0x01d01a2c32635355
Faulting application path: C:\Program Files\Adobe\Adobe Premiere Pro CC 2014\Adobe Premiere Pro.exe
Faulting module path: C:\Program Files\Adobe\Adobe Premiere Pro CC 2014\dvaui.dll
Report Id: 924f6336-861f-11e4-821e-0024811149b1
Fault bucket 45383478, type 20
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Windows Information - Windows Error
Problem signature:
P1: Adobe Premiere Pro.exe
P2: 8.0.1.21
P3: 53c7b17f
P4: dvaui.dll
P5: 8.0.1.21
P6: 53c76970
P7: c0000005
P8: 00000000002f4e39
P9:
P10:
Attached files:
C:\Users\esdstudent\AppData\Local\Temp\WER9443.tmp.WERInternalMetadata.xml
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_Adobe Premiere P_ad637fa2c8bd70d3e74771b4be53569c25a980_00c3bab6
Analysis symbol:
Rechecking for solution: 0
Report Id: 924f6336-861f-11e4-821e-0024811149b1
Report Status: 0I think you have answered your own question... you must have BOTH types of user accounts set to Administrator
This is an open forum with a mix of program users and Adobe staff, not Adobe support... you need Adobe support
Adobe contact information - http://helpx.adobe.com/contact.html may help
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us" -
Unity 7.0 - AD Domain Admin Group
I have Unity 7.0 with failover, AD, and Exchange 2010. Unity accounts are created in AD in the Domain Admin Group. Most that I have read states if Unity is a domain controller it needs to be in the Domain Admin group. I do not know how to see if Unity is a domain controller and do not know why (previous to me), Unity was setup in the Domain Admin Group.
Can you help me understand why Unity might be setup in the Domain Admin Group, reasons?
Thanks,Melinda;
-> if you use the tools depot option in the unity server you will see an option called dc\gc reconnect tool to check if unity looks at itself as a domain controller; here is a link that will give you more informaiton on this tool; http://www.ciscounitytools.com/Applications/Unity/DCGCReconnect/Help/DCGCConnectionManager.htm
-> Can you clarify if you are asking whether the unity reference account ( unityinstall/unimgstoresvc/unitydirsvc) needs to be domain admin or not ? If you query is related to the above mentioned accounts ; what permissions do they need is documented in the following link;
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/unity/5x/installation/guide/umexfo/5xcuigumefox/5xcuigumefo070.html
-i hope this helps. -
Remove Send-As for domain admin groups
With referring to below link.
http://social.technet.microsoft.com/Forums/exchange/en-US/d2e97e64-536a-4c46-8e57-e0ac6a4ad64e/how-do-i-remove-domain-admins-send-as-settings-for-all-users?forum=exchangesvradminlegacy
The solution work perfectly for normal user but for user whose member of Domain Admin as well, the send-as will revert back from Deny to Allow after a while.
I have a user who member of domain admins group, say User A. Since we want to remove the send as for all users (including User A), I did followed the steps, Denied Send-As for Domain Admins group for User A.
However, after for while it return back to Allow.The permissions on members of special groups is managed by the AdminSDHolder and SDProp.
http://technet.microsoft.com/en-us/magazine/2009.09.sdadminholder.aspx
The way to deal with this is to give your domain admins (and any other admins) a separate account and to remove their "normal" account from any privileged groups (and to reset the adminCount property and "allow inheritance" on the "normal" account). Do NOT
give the admins a mailbox.
If you can't do that, then deny the Domain Admins group the "Send As" and "Receive As" permission at the organization level in the AD's configuration container. Use ADSIEDIT to do that here:
CN=<Organization>,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=<domain>,DC=<tld>
--- Rich Matheisen MCSE&I, Exchange MVP -
Which unity accts can I take off "domain admin" group after install
Hi
Unity 5.X in UM mode - Which unity accts can I take off "domain admin" group after install (ie unityinstall, unityadmin, UnityMsgStoreSvc, UnityDirSVC etc..)
and if I do so, what is the impact or if I want to upgrade in the future?
ThanksUnityInstall should be the most powerful account and is the only account that should be added to the Domain Admins group by the Permissions Wizard. This is definitely true for Exchange 200, 2003, and 2007. I've not dealt with a lot of customers on 2010 yet so this could have changed; however, I doubt it. You can verify what I'm telling you here:
http://www.ciscounitytools.com/Applications/Unity/PermissionsWizard/Unity403_411/Help/PWHelpPermissionsSet_ENU.htm
This link will tell you what permissions and group memberships are set at a high level for all the Unity service accounts.
To clarify what Jonathan said, by "downgrade" the UnityInstall account - the rule of thumb is this:
Cisco supports that you DISABLE the UnityInstall account, if desired, after an installation. This account should only be used during installation activities. However, DO NOT DELETE the account in AD. So, again - disabling the account is OK.
Hailey
Please rate helpful posts! -
Is it recommended practice to add SCCM service accounts to the Domain Admins group?
I am working with an external consultant that is recommending that all of the SCCM service accounts be added to the Domain Admins group. I am not the SCCM engineer, I am the AD guy, this is the reason I am questioning this methodology. I have
read several articles that seem to provide the appropriate configuration options for all of the SCCM accounts so I see no need to allow these accounts to have Domain Admin level access to the environment. I don't see a reason for ANY of the service accounts
to have Domain Admin, let alone all of them. I have referenced several TechNet articles but there does not seem to be definitive guidance around this. Could anyone assist with settling this? Thanks in advance.No, there's absolutely no reason for the service accounts to be domain admins.
All of the required service accounts used in a SCCM environment can be given the proper permissions given their purpose.
Example: Join Domain Account can be given the permissions to join computer objects in the very specific OU in AD, and nothing else.
Network Access Account only need read access to your distribution points.
Client Push Account needs local administrative permissions on your clients.
What i'm trying to say is. None of any of the service accounts needs to be domain admin. Hope that helps.
Martin Bengtsson | www.imab.dk -
Disjoin computer from domain without being domain admin
Windows Server 2008 R2 AD
I have created a group to enable non-domain admin user/s to join computers to domain. we're trying to have the same set of users join computers to domain but we are unable to unless a domain admin deletes the old computername from the domain.
is what we're trying to achieve possible? to allow non-domain admin users disjoin computers from domain?Any local administrator can remove the computer from the domain but if the user has no appropriate permissions on AD, it will leave the computerobject orphaned in AD.
If you need a user to be able to remove a computer object from AD you can delegate permissions for that. By default the Account Operators Group has the appropriate permissions.
note that both permissions to create, change or delete (computer) objects in AD should not be granted lightly.
http://support.microsoft.com/kb/818
MCP/MCSA/MCTS/MCITP -
Exchange 2013 Give domain Admin access to all users inbox
In the old 2007 exchange server we had domain admin access to everyones mailbox so we could open anyones email box using outlook client.
But in 2013 exchange the mailbox delegation does not give us the option to add a "group" to the full access area, old allows to add a "user" who has a mailbox setup in exchange. I see there is Exchange Server group listed under Full Access
, but it does not work added our domain Admin user to that group rebooted exchange and the test machine but did not work.
Only option that works to allow mounting of xyz users mailbox via abc admin user is to actually add that abc admin user to the xyz mailbox under mailbox delegation > Full Access.
Is there a work around this, so we can simply have a group ABCD with user ABC or DEF etc. etc. so they can access everyones mailbox instead of going in and changing all users mailbox delegation one by one for the new user etc. ?Have you tried using the Exchange Management Shell?
Get-Mailbox | Add-MailboxPermission -User Name_of_Group -AccessRights FullAccess -InheritanceType All
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."
I did i tried get-mailboxpermission and other than NT Authority and the end user the Deny was set to True for all inheritance rights. I tried your command, added user to the group i wanted under Enterprise OU in AD and restarted transport on exchange and
logged in on the test machine again.
Still no go, the user I am trying to add when using get-mailboxpermission shows up as Denied for fullaccess so is that overriding the group permissions ?
RunspaceId : 2xxxxxxx0
AccessRights : {FullAccess}
Deny : True
InheritanceType : All
User : domain\abc
Identity : domain/Users/xyzuser
IsInherited : False
IsValid : True
ObjectState : Unchanged
And for the group i just added with the above abc user inside it:
RunspaceId : 2xxxxxxxxx0
AccessRights : {FullAccess}
Deny : False
InheritanceType : All
User : domain\newgroupadded
Identity : domain/Users/xyzuser
IsInherited : False
IsValid : True
ObjectState : Unchanged
So is the users deny is causing this ? Not really sure why ABC domain admin/enterprise admin is the only one listed as no deny, there are other mailbox users that do not show up, I am assuming I have to create a new user a domain local user and that might
work ? I wanted the Domain/Enterprise Manager/admin to have access so we would not have to keep toggling between users just to access someones inbox.
Also further down the list of mailboxpermission i see the user abc (the user i want to add to the group to have access) is listed with Full access and Deny flag is set to False instead of True.
So have two entries for user abc one with deny flag set to true and one with deny flag to false.
AccessRights : {FullAccess, DeleteItem, ReadPermission, ChangePermission, ChangeOwner}
Deny : False
InheritanceType : All -
Windows Server 2012 R2 non-default domain admin limitations
Enivronment: Windows Server 2012 R2Problem: members of Domain Admins group are restricted in ways the default domain admin account is not. This is with or without UAC disabled; there are even more prompts with UAC enabled. Here are two examples:Attempt to copy to Public Desktop. Built-in domain admin or local admin account can do so without restriction; any other member of Domain Admins group is prompted for administrator permission (although clicking Continue proceeds without actually requiring further authentication/permission)Right-click -> Properties of hard drive in Explorer is missing Shadow Copies tab for non-default Domain Admin. Yes, I can simply right-click the drive and go to Configure Shadow Copies, so this one is not so important. But it is an inconsistency that means I have to access things just a bit differently...
This topic first appeared in the Spiceworks CommunityI have already replied to that here: https://social.technet.microsoft.com/forums/windowsserver/en-US/b57abf72-90e6-44d7-93a5-0e57cb5404c9/nic-teaming-with-ws2012-ad
I still do not see an MS statement saying that it is supported for DCs.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile -
Domain Admins have Send As feature by Default?
We have discovered that all our Domain Admins can utilise the "send as" feature and send on behalf of any other user, by default. How do we go about resolving this, so that this is not the case anymore?
Clarify: “Domain Admin” has “Send As” right to all mailboxes
Collect unmentioned info:
Version: windows server, exchange [03/07]?
Notes: domain admin has “send as” right by default in ex07, but based on your description, it seems to be ex2k3, right?
Troubleshooting:
1. Add a registry in HKEY_CURRENT_USER\Software\Microsoft\Exchange\EXAdmin
Type: REG_DWORD
Name: ShowSecurityPage
Data: 1
2. Check the permission in ESM
a. Right-click your org icon on the top level of ESM
b. Go to “Security” tab
c. Check permission on “Domain Admin” is ok.
d. Also check your “Server” and “Mailbox” objects, make sure the “Allow the inheritable permissions to propagate..” has been checked
3. Run Domainprep to make sure that everything is ok at the permission
PS: Wait until all the permissions propagate to child objects -
user cannot change password option is automatically getting unchecked while giving domain admin rights
Greetings!
"Domain Admins" falls into the category of protected groups and it is included in ADminSDHolder process. It is normal and was designed in order to prevent the modification to these privileged groups. More information on the link below:
AdminSDHolder, Protected Groups and SDPROP
Regards.
Mahdi Tehrani |
|
www.mahditehrani.ir
Please click on Propose As Answer or to mark this post as
and helpful for other people.
This posting is provided AS-IS with no warranties, and confers no rights.
How to query members of 'Local Administrators' group in all computers?
Maybe you are looking for
-
How do I use my USB webcam with Yosemite?
Since upgrading to OS 10.10, my Mac Pro no longer recognizes my Gear Head USB webcam. Any suggestions?
-
Am trying to install apps from the store but each time am getting a message that a newer version of ipad software is required
-
Any Report or Trx to see the posted documents with MR11?
I want to see all documents which were posted (compensated) by MR11. I know there is the MR11SHOW but is not the one I want. Suppose three months ahead I want to see which documents were done by MR11. How can i get this information? So, I need a repo
-
I am very new to the MAC, had snow leaopard and wanted to upgrade to mountain lion.. I am on hour #8. I know its because i have no idea what I am doing so can someone please help.
-
Copy UI elements between views
Hi! I hope this will be easy for you, but for me it's unknown yet. I have 5 views within the same WD component, and these views have a section, which supposed to be the same within all 5 views (display some additional data). They are working from a C