Domain is partially active

Hi Experts,
I am facing problem while activating a standard domain which we changed. It is showing error while activating the domain as one of the dependant table is inconsistent. I tried activating that table in all the ways, but the table is not getting activated. when I checked the activation log, both are partly active. Please help me out.

Hi,
you will have to adjust all the tables first, although this is the lengthy process but same needs to be done, follow below process.
1) Do the table adjustment for TRESE and activate it.
2) now go to domain and try to activate, this time it will through error for some other table, take that table name and again adjust the same
3) after doing adjustment for that table again go to domain and try to activate again will give error for some other table, take that table and adjust that table again.
Follow above steps untill you stop getting the error and all tables are getting adjusted, once all tables will be adjusted your error from the domain will be removed and your domain will be activated.
I think below are the tables needs to be adjusted
/BDL/COES
/BDL/IBUS
/BDL/SERVCUST
/BEV2/ED922T
/GEP/T_TIMESCALE
/GEP/T_USER
/ISIDEX/EIDPROCT
/RPM/CAP_CATG_T
/RPM/CAP_GROUPST
/RPM/FIN_CATG_T
/RPM/FIN_GROUPST
/RPM/ITEM_TYPE_T
/RPM/LIFE_CYCLET
/RPM/OPTN_CUST_T
/RPM/PERIODTYPET
/RPM/PHASE_T
/RPM/PORT_ROLE_T
/RPM/PORT_TYPE_T
/RPM/QGRP_CUST_T
/RPM/QNNR_CUST_T
/RPM/QSTN_CUST_T
/RPM/SERVICE
/RPM/SERVICE_T
/SAPDMC/LISCREEN
/SAPPO/OBJ_BOR_T
/SAPPO/SOBJ_BORT
/SAPSLL/OBJIDX
/SAPSLL/PREVDAUK
/SAPSLL/SPLAUDK
ADRP
ADRPS
AGR_HIERT
AGR_HIERT2
AGR_HIERT3
AGR_HPAGET
AGR_MINIT
AGR_MINIT2
AGR_TCDTXT
AGR_TEXTS
ALCUSTSET
ALTOOLEXEC
ALVFOBTY
BCA_US_BC_ADDR
BDLCOES
BDLCTEXT
BDLFUNC
BDLGROUPS
BDLIBUS
BDLSERTRAN
BDLSERVICE
BKORM
BKORR
BMA_EXCE
BUT000
BUT000_TD
CCIHT_IAL
CCIHT_MJ
CCIHT_MJIMPORT
CCIHT_MP
CCMSBI_TESTCASES
CFX_BOM_DTF_PR_T
CFX_BOM_PDX_AFDT
CFX_BOM_PDX_AFLD
CFX_BOM_PDX_FLD
CFX_BOM_PDX_PR_T
CFX_PDX_ATTR_T
CFX_PDX_ATTR_V
CFX_PDX_ELEM_T
CKMLRUNPERIOD
CMSALOGAR
CMSALOGT
COINCTRL
COMM_CATEGORYT
COMM_CATEGORYTH
COMM_CATGRY_CO_T
CRMC_CIC_ASP_AT
CSM_ASC
CSM_OBJ
CWBNTSTXT
DFKKZA
DXPROJ_T
DXRUNDEF_T
DXSUBPRO_T
DXTASKS_T
ECOBJUSE
ECOMEVENTT
ECOMPROCT
EEDMCONSLOGP_DB
EIDESWTDOC
ESOURCEH
ESRCSYSTEM
EWA_ORDER_HEAD
EWREL
EWTXT
FMCCFLOTHD
FMFCPOT
FMFPOT
FOPCAIST
GFWCUAX
GFWCUAXU
GFWCUDA
GFWCUDAU
GFWCUDC
GFWCUDCU
GFWCUDI
GFWCUDIU
GFWCUDS
GFWCUDSU
GFWCUGR
GFWCUGRU
GFWCUIT
GFWCUITU
GFWCUPO
GFWCUPOU
GFWCUSC
GFWCUSCU
GFWCUVA
GFWCUVAU
GMAWARDTYPETEXTS
GMGRTEXTS
HRHAP_OBJECT
HRHAP_P_T
HRHAP_T
HRP5103
HRP5104
HRP5106
HRP5111
HRP5125
HRP5126
HRP5128
HRP5130
HRP5132
HRPAD532
HRS1211
HRT1719
HUPAST_T
ICLPOLO
ICLSERVCATT
ICL_PRIVILEGE
ICL_SUBROG
ICSPOLO
ICS_PRIVILEGE
ICS_SUBROG
ISSUE_ATTRIB
ITS_TAGS
JKSDPROTOCOLHEAD
JKSDREPROTOCOLH
J_1B_CBT_CHECKS
KBLK_USER
LAW_ATTR
LAW_DESCR_INST
LAW_DESCR_SYSTEM
LAW_GROUPT
LSO_COL_TMPL_PAR
MAAVC_MD
MAAVC_MDO
MGVSPECTYPETEXTS
N1CUSTOMER_TYPES
N1MATVM
N2APPLOGSYS
N2BATMP
N2BK
N2CLIENTDD
N2DESKAPP
N2DESKTOPPROG
N2DET
N2DOCTEMPLATE
N2DTAPPL
N2ETT
N2F4_CAT_HEADER
N2F4_HIT_HEADER
N2FDBS
N2GT
N2N3AF0100
N2N3AF0200
N2PRZ_HIT_HEAD
N2PRZ_HIT_KAT
N2PRZ_OPS_HEAD
N2PRZ_OPS_KAT
N2PS
N2RL_FIRMA
N2RL_GLIEDER
N2RL_PRAEP
N2RL_SIGNS
N2RL_STOFFE
N2RL_STWS
N3KVM1300
N3KVM1800
NCIF
NMKAP
OIJBRDH
OIJLOCMAT
OIJRDH
OIJTSMAT
OIJ_RDHEAD
OIRCPRCHHEAD
OIRC_PRLOG_PRM
PA0002
PA0021
PA0022
PA0388
PA0424
PA0546
PA0600
PA0652
PA0662
PA0697
PA0752
PA0782
PB0002
PB0022
PERS_TXT
PSO05
QIMTHT
QISTPT
QPRS
RMXTT_Q11
ROLE_INAKT
RPM_AREA_T
RPM_PAGE_ID_T
RPM_SET_NAME_T
RSANT_FCT_TOOGT
RSANT_FCT_TOOLT
SALRTCCNTT
SALRTCNTT
SALRTTDEMO
SAUNIT_NO_LEGACY
SCMG_T_CASE_ATTR
SDBINDING2
SDSERVICE2
SGOSTOJTTR
SLS_RCCON
SMENAKTT
SMENCUST
SMENENTT
SMENINTT
SMENSAPT
SMENUSELNT
SWDSTEXT
SWDSWFCTXT
SWD_TEXT
SWD_WFCTXT
SWFDCRLHCT
SWFDXMPCNTT
SWFSLSAPPLCUST
SWF_WFPDSC
SWJPCTXT
SWJPHEAD
SWJPHTXT
SWOTLQ
SWOTLV
SWOTTO
SWOTTOLE
SWOTTQ
SWOTTV
SXROUTE
T51AV_AT
T51AV_BT
T51AV_CT
T51AV_RT
T596B
T596H
T5BR1T
T5CSJ
T5D2W
T5D2Z
T5DWXT
T5F5T
T5GEF01
T5GPBSH_CCT2
T5GPBSH_QUD2
T5GPBSH_QUDT
T5ITUG
T5J61
T5J62
T5J65
T5J65T
T5LBT
T5UPBS01ACTIONT
T5UPBSPA17T
T5UPBSPA20T
T5UPBSPA25T
T5UPBSPA27T
T5UPBSPA29T
T5UPBSSECCLT
T604STW
T706WWW_TXT
T77EHT
T77EIT
T77QC_VIEW_TEXT
T77RCF_APPLSRC_T
T77RCF_APPLSTY_T
T77RCF_CPRSTEP_T
T77RCF_FUNC_T
T77RCF_HIER_T
T77RCF_INDU_T
T77RCF_MDL_PRMT
T77RCF_OIUNIT_T
T77RCF_POSTCHN_T
T77RCF_PROCESS_T
T77RCF_QA_GROUPT
T77RCF_ROLE_T
T77RCF_RP_ACT
T77RCF_SMASK_T
T77RCF_SM_GROUPT
T77RCF_UI_LINK_T
T77RQ_ICON_T
T77SP_CDT
T77WWW_SRVN
T7FIAWT_T
T7FIAWT_TM
T7INI3
T7KR24
T7KR26
T7PIQSCALE_SPSYT
T7PIQTRCODNOTET
T7RUPA0022
T8JUT
TBCR
TBD00T
TBDTPT
TBKK88
TBKK89
TBSFC001T
TCBRGROUPT
TCG82
TCOOPC_EVTSDT
TCOOPC_ITEMT
TDSTOP_ACTION_T
TEPSIN
TEPSOUT
TFIBLSCREEN1T
TICLWF002
TICLWF003
TICRC1
TJEP_PRTPAGEDISP
TN2DTAPPLT
TN2PCA
TNICPM
TOBJ_TPT
TOJTT
TOLET
TPFBA
TRESE
TSP0T
TTREVTROLE
TTREV_ROLE
TUCON
TUL_MEMOS
TUMRES
TUPRO
TUWS_SURVEY_LOG
TWPCUSTMCT
TWPCUSTOMT
URL_EXTXT
URL_TEXTS
USRGENPRS
USRSYSACTT
UTCMP
VAL_AKHT
VER_TIDY_HTML
VIGGRR1
VIGTEXT
VILUCSNCSO
VILULB
VILUPS
VIVNTEXT
VTRKP
VTTK
VVKKDRKO
VXSIPS
VXSIPT
VXSIQT
VXSITDLT
VXSITDT
VXSITST
VXTRKST
W3DEVFAVT
WBO1
WFMCAS_CALCST_WA
WLMT
If you are working in dev then you can create BDC program to agjust this tables and once all gets adjusted you can activate the Domain.
Try the same as it works for me, I have tried at my end.
Regards,
Umang Mehta
Edited by: UMANGmehta on Jun 14, 2011 11:26 AM

Similar Messages

Domain has patially active ,How to actiate the Doamin ?

Hi Team,
I have one requirement to change the length of the field in the database. So I have changed the standard domain KUNNR length from 10 to 12 and activate the domain ...after some time I will cancel the operation and again put the length 10 and activate the domain .The KUNNR involved so many objects in SAP so some objects are active and adjusted and some are not adjusted.
I saw in the domain level, it shows the domain is partially active. Please help how to active the partially active domain.
Thanks & Regards,
Samantula

Hi Samantula,
I already faced the same issue recently. Let me tell u that,never decrease the domain length else you will loose data from table.
take an e.g. let say your field of length 3 has data 'ABC' and now you want to reduce the length to 2 then SAP will not able to append the record in the table and all data will be lost.
Regards,
Alok
<please do not ask for points>
Edited by: Thomas Zloch on Mar 9, 2010 9:42 PM

Reason for Table Partially Active

HI experts,
I am working with table FKKVK with APPEND structures.This table become partially active after sometime.
I dont know the resons that why this table become partially active.
I have checked that :-
1) All the append structures are also active.
2) all check tables are also ACTIVE.
3) all the domains all also ACTIVE.
Please suggest the reason that why FKKVK table become PARTIALLY ACTIVE.
Thanks,
Sampat Tandon

Hi,
Tough you have activated all the objects separately, your table is changed now by a append structure which means that you will have to adjust the table accordingly to activate it. So to activate your table follow the below process,
Goto your table -? Utilities -> database utility -> Adjust & activate. this will make sure that your table is completely active and all the changes are in effect.
Please let me know if you need further details.
Thanks!
Praveenkumar T.

Error in BSEG partially active after removing the custom field CI_COBL in ECC 6.0

Hello SAP Gurus,
I added one custom field in CI_COBL and activated ,the all the connected DB tables like BSEG etc activated successfully. But after that I deleted the field from CI_COBL but the BSEG and CI_COBL could not be activated. It is still in partially active .
Please suggest how to resolve this issue. Its very urgent.
Thanks in advance
Regards,
HP

Hi,
I hope you are going to do in Development system then check any errors in SE11.
if its fine then got to SE14
Check the status whether Active or partially active
if its other then Active, you may get help from BASIS team or yourself can do it in SE14
Click the button 'Activate and adjust database' please ensure that the radio button save data should be selected and which is default or else the entire DB records will be deleted along with DB table activate.
In development you can choose processing type as Direct/Background.
Please post if you have further query.
Regards,
Vadamalai A

Query related to UPN Suffix in Hierarchical domain architecture in Active Directory deployment

This is regarding a query related to UPN Suffix in Hierarchical domain architecture in Active Directory deployment.
We use LDAP query (filter uPNSuffixes=* for the parent domain DN) to retrieve the upn suffixes configured in the AD Domain. This returns the UpnSuffixes configured for the entire domain tree ( upnsuffixes of parent domain and all the child domains) in the
hierarchy. The AD Domains and Trusts configuration lists all the upnsuffixes as part of the dnsroot domain.
For one of our implementation, we need to distinguish between the UPNsuffixes belonging to the parent and child domain and map the UPN suffixes with the respective domain in the hierarchy. As the upnsuffixes are stored as part of the root domain in the AD
domains and trusts configuration, it was not clear how to retrieve the information specific to each domain in the hierarchy.
It would be helpful if you could provide pointers on how to obtain the above mapping for the upn suffixes in a hierarchical domain setup.
Thank you,
Durgesh

By default, you can use only the domain name as UPN suffix for user accounts you create within the domain. It is possible to add extra UPN suffixes but these are added at the forest level and not specific to a domain.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

How to change the status of a Partially Activated Red request?

Hi
I am unable to delete a Request which is partially activated and which is in Red.
This was due to
We were trying to manually update a data packet which was struck for a long time in the above request. While we changed the status of the requests to red and were about to perform the manual update, the struck data packet processed automatically and the activation too started automatically before the request was set to green.
To recover , we need to delete the request which we are unable to do.
Please provide help
Regards,
Rezwan Asraf Ali

Dear,
When you create a production order, an operation created by the system is generated automatically if no routing is used for the creation. As a result the order header receives the status HOGAN; the operation created automatically also has this status.
If you delete the operation created automatically and then do not have the status HOGAN.
To avoid this maintain the Routing for the material or delete the setting of default operation from OPJG.
Regards,
R.Brahmankar

DSO Partially Activated

Hi All
I have searched before posting this and although there are some threads re: the above they are not entirley like mine.
I have run an initialisation on a DSO but it will not let me activate it. On monitor everything is showing as green. When I go into the DSO to activate it the QM status turns red. If I hover over it the message "Error occurred during the activation process". If I click it a pop up appears saying "Request is already (partially) activated; no further QM action possible".
The same load is also loading into another DSO and everything is fine with that one.
Do any of you have any idea of what can be causing it.
I've tried initialising without data
I've tried loading into the psa first
I've even tried running the load and activation via a process chain
but each time the activaiton fails, maybe there is a setting somewhere or somthing I have to delete before I can go any further.
I've read a thread which mentions RSMONICDP, RSICCONT, RSODSACTREQ and RSODSACTUPDTYPE but these were mentioned in the respect of deleting the request. I can delete it but I want to beable to activate it.
thanks in advance
Sandra

Hi All
Thanks for getting back so promptly.
Dennis,
I don't think it's anything to do with volume of data as I have also tried initialising without data and it still won't let me activate.
Ansel,
I've looked on SM37 and it says "Overlapping check with archived data areas fro InfoProvider ZSD_O01. Data to be activated successfully checked against archiving objects. ABAP/4 SYNTAX ERROR"
I have now searched on the above error and although I found the exact same error the person solved it but didn't say how he solved it
I've looked on ST22 and there is a dump it is saying something about " /BIC/B0000343000 is unknown"
Subray,
I haven't checked the differences between the two DSO yet but will do soon
thanks again for your comments, I will carry on looking
sandra

Performance ME51 table EBKN partially active

Hello group,
we suddenly had a performance issue, and we found that suddenly table EBKN appeared as "patially active" in the database. After activating the performance problems were gone. But we have no clue as to how the table got the status "partially active" and what this means. We got no errors or warnings when activating.
Doe sanyone have a clue as to what the cause is for the status "partially active"?
Regards, Léon Hoeneveld

Hi,
> I've checked with SE01 Transport organizer if any transport contained table EBKN.
it's not necessarily the table but could be one of the includes .... .
Partially active means that a part of the table (e.g. an include) was not active while the table (the part without the include) was active. You can try to find that part and search that in transports.
In the cases i had i was like this.
Regaring your performance problems: I wonder if they have to do with a partially activated table. Honestly i doubt it.
Programs working on partially activated tables should either work or dump but i never heard of performance problems
related to partially activated tables....
Kind regards,
Hermann

Partial activation in standard SAP object

Hi all,
I had to change a standard SAP object. However, when i was asked about the language, i accidentally clicked "change original language". I made the changes and activated.
However, it shows me partially active. Please let me know if it is ok, or if there is some way out.
Thanks and Regards
Vijay

hi vijay,
Welcome to SDN.
Partial Activation Comes Up with the warnings. In Most of the cases the Table will not be converted according to the requested mode. Plz Read the warnings that you are getting while Activation and Try to solve those.
Mostly It will Work.
Hope this will Help.
Reward If useful.
Regards
Sumit Agarwal

Delta load - request status is partially activated

Hi to All,
From one Info package data is loading to 1 CUBE, 1 ODS simaltaneously through PSA, but data is not updated to PSA. Then I have activated the ODS and then I changed the ODS request status to GREEN but here transfered records are 2000 but added records are 0, after few minuets data packets came into PSA then I am trying to CHANGE THE REQUEST ODS STATUS TO RED, IT IS SAYING "REQUEST IS PARTIALLY ACTIVATED".
In both ODS and CUBE manual updation terminating.
LOAD IS : DELTA
Pls can anyody give suggestions/inputs to come out from the problem.
Thanks In Adv,
MSM.

Hi Akash,
Here ODS request status is changed to(from RED ->GREEN) GREEN forcebly b'z red request is not activating the ODS, after ODS activation when I am trying to change the request status to RED, its saying " REQUEST IS PARTIALLY ACTIVATED NOT POSSIBLE TO CHANGE THE QM STATUS"
If we want to delete the request the REQUEST SHOULD BE IN RED, its allowing to change to RED
pls help me on this what can we do now
Thanks in Adv
MSM.

Policy domain root for Active directory

Does anyone know how to configure policy domain root in Active directory ?.
I am installing COREid Access policy manager which needs a policy domain root input during the web interface configuration.
Please some one help in resolving this issue.

Hi,
I might help if can give the exact description of the issue that you are getting. However I have encountered similar or exact problem that you are having. Let me know whci ldap directory you are using with your CoreID install.

Unable to delete the request id in ODS....indicating partially activated

Dear All,
When I tried deleting a request from ODS, am unable to turn the QM status to red, itz indicating that the request is partially activated. When I tried deleting the request without changing the status, the delete icon is popped up, but eventually goes back to the previous status and hence does not get deleted.
Due to the above, the subsequent requests coming into the ODS are not getting activated at all...
I tried running the function module RSBM_GUI_CHANGE_USTATE, to delete the request, but to no success. Similarly, when I tried locating the requests in the four tables RSICCONT, RSMONICDP, RSODSACTUPDTYPE and RSODSACTREQ, could not found the request id to be deleted in any of these 4 tables.
Please suggest some solution as it is of high importance...
Thanks and Regards,
Edited by: sachitp on Feb 27, 2011 12:25 PM

Hi,
You can try the below options,
1. Remove the request data from the active table using the function
to delete data selectively.
You must enter selection criterion to select the data of the
aborted request.
2. Use Transaction SE37 to execute the 'RSAR_ODS_API_DEL' function
module as follows:
I_REQUEST <Name of the activation request>
I_DATE <current date>
3. Use Transaction SE16 to delete all entries for this request and
for this ODS object from the RSICCONT, RSMONICDP, RSODSACTUPDTYPE
and RSODSACTREQ tables.
Thanks,
Vinod

How do you find out if the domain profile is active in the firewall?

A script needs to determine if a firewall profile is active. Does anybody know of a function to do this?
The problem I a trying to solve is when a server boots it may not activate the domain profile. It happens if the server is booted before a domain controller comes on line or if and adapter team is in use. To solve this, I run a script at boot
up that waits and then restarts the nla service and typically the domain profile will become active. However it isn't fool proof. I want to modify the script to verify that the domain profile has become active. However, I cannot find a function
to determine if the domain profile is active. Can someone help with this?

Are you using something with PowerShell 4.0 that has the NetSecurity module? The second part of that question will be based on the version of the Windows Operating System. To check, try this: Get-Module -Name NetSecurity. If you do, you can based your logic
around the Get-NetFirewallProfile and, perhaps, the Set-NetFirewallProfile cmdlet.
Get-NetFirewallProfile -Name Domain
Get-NetFirewallProfile -Name Domain | select Enabled
Get-NetFirewallProfile -Name Domain | select -ExpandProperty Enabled
(Get-NetFirewallProfile -Name Domain).Enabled
To enable (or, activate) the profile, you can pipe your Get- cmdlet to the Set- version of the cmdlet.
Get-NetFirewallProfile -Name Domain | Set-NetFirewallProfile -Enabled:True
Without access to this version of PowerShell and this module, you'll either need to use netsh and/or WMI. I haven't checked myself, but I wouldn't be surprised if you can find something in the
Gallery.

Mac show up as domain controllers in Active directory

Anybody had a tiger intel machine show
up as a domain controller in active directory....

Hi Daniel,
might be the obvious, but is the Time inside your VPC Windows also off by these six hours ?
Maybe a simple setting of the 'Windows Time' to the correct time is needed.
Nonetheless I don't think that the different/future time will be affecting your databases in any way.
Regards
Stefan

Doc splitting partially active

Dear all,
While posting the document i came across following error message: "document splitting is partially active" please provide the solution for this
Points-gaming

Dear Sonu,
You need to activate the document splitting for your company code
Follow Path: IMG>FINANCIAL ACCOUNTING(NEW)>GENERAL LEDGER ACCOUNTING NEW>BUSINESS TRANSACTION>DOCUMENT SPLITTING-->ACTIVE DOCUMENT SPLITTING
If need any clarifications in this please let me know.
Best Regards
Mir

Domain is partially active

Similar Messages

Maybe you are looking for