Partial activation in standard SAP object

Hi all,
I had to change a standard SAP object. However, when i was asked about the language, i accidentally clicked "change original language". I made the changes and activated.
However, it shows me partially active. Please let me know if it is ok, or if there is some way out.
Thanks and Regards
Vijay

hi vijay,
Welcome to SDN.
Partial Activation Comes Up with the warnings. In Most of the cases the Table will not be converted according to the requested mode. Plz Read the warnings that you are getting while Activation and Try to solve those.
Mostly It will Work.
Hope this will Help.
Reward If useful.
Regards
Sumit Agarwal

Similar Messages

How to create Object Links For non standard SAP Objects?

Hi all,
I need to create an object link in cvo1n for a non standard SAP object (inspection characteristics) . we have two ways to do this
1. Create a screen for the rquirement by taking the standard screens as reference.
2. Implement badi document_obj.
I need a step by step process to perform both the steps. Sample codes will be helpful.
One more thing is that i need a link in the standard screens of inspection characteristics also. How to get a two way link both in cv01n and in the standard inspection char screen.

hi
Customizing for the Do cument Management , you must maintain the key fields for the SAP objects that you want to link to document info records, by choosing Control Data ® Maintain key fields.
Process
Program two screens for the following module pools for the SAP object that is to be linked additionally:
u2013 SAPLCV00
u2013 SAPLCVIN
The process logic must be according to that of screen 0204 in program SAPLCV00 and must not be changed.
Create the function module OBJECT_CHECK_XXXX (XXXX = name of the SAP object).
If this object can be classified, this function module already exists in the standard system. Otherwise, copy the existing function module OBJECT_CHECK_EQUI (linking of equipment) and change it to suit the new object.
also you can attach the document to PRT also. but it will not show you in dms. This type of attachment is only from otherside.
thanks
nitin
award point if useful

Transport Requests for standard SAP Objects

Is there a way we can determine the list of standard SAP objects(user exits, requirement routines, etc.) that were transported. Basically I would like to get a list of Standard SAP programs(non-Y and non-Z programs) which have been modified and transported up in the landscape.
Any help would be appreciated.
Thanks,
ALAM.

Hi,
You can find details in the table e071.
Regards
Ben

Reverting changes made to Standard SAP objects(Workflow Tasks)

Hi,
    How to revert back changes made to Standard SAP program . The changes are stored in a Repair request . The details
of repair request is as folloews .
    GD1K900068   ABAP
        Standard Task
            20000166
            20000167
            20000168
        Workflow templates
            20000075
. The changes are not recorded in Modification Assistant .
    Kindly guide me .
Thanks & Regards,
S.Sivakumar

Hi,
Take the reference of another system of those tasks and modify as it is.
And for Workflow Take Export the Workflow to XML using SWDD Tcode in another system and import the same using SWDD into the existing system.
In SWDD Tcode ==>
Step 1: Workflow-->Import/Export-->Export to XML File    " Export to XML file of the workflow which is in another system
Step 2: Workflow-->Import/Export-->Import from XML File " Import From XML file of the workflow which is in another system to current system
Hope this would help you to solve the issue.
Regards
Narin

List NON-standard SAP objects

How can I list all NON-Standard objects on a SAP Oracle database?
Reason: I believe I have objects that were created with SAP naming conventions that were not part of the installed SAP modules.
My understanding is that there are SAP documentation tables like DOKIL that I could use to join against current objects.

I can confirm the table OIURV_DOC_DTL_BK is a standard table in ERP, it seems to be part of IS-OIL.
Let me wrap up the information to check, whether an object is standard or not:
- If it is in the ABAP dictionary (table TADIR), then use SE11 to find the creator and package information
- If it is not in the ABAP dictionary then the object was most likely created directly on the database. You can then query dba_objects for creation date (created). You will have to talk to the folks with direct database access about it. Generally objects should never be manipulated directly on the database.
Cheers Michael

Find exact package for saving the workbech request for std SAP object

Hello friends I have edited a std SAP prog for printing the import PO(got access key from market place).After editing while creating transport request I am not able to find the package to which it should be saved.now the problem is that How to move that program to our quality server.
the program is
/1BCDWB/LSF00000063TOP

Hi achal,
are you sure you modified a standard SAP object. /1BCDWB/ prefix is common with all quick view reports - they are local and user-specific. You can convert a quickview to query to report. Using a modification key you may add it to the standard - choose a package as you prefer. But better copy the generated query report to customer name space - because it never was and never will be SAP standard. If it is in customer name space, release changes are no problem at all.
Regards,
Clemens

How to change the browser title of standard SAP WD4A application - eRecruit

Hi,
I have a requirement to change browser title for standard SAP WD4A application hrrcf_a_candidate_registration. I know this value is used from application description filed.
Current set up is 'Candidate Registration'. (WD Component HRRCF_C_REGISTER_UI)
I tried to use enhancement framework technique and application customization/configuration - but was not successfull.
I do not like the idea of changing the standard SAP object since it might be overwritten in future upgrade. And also I do not prefer to create z* copy of this application as well.
Any ideas how to handle this request? Is dynamic modification of this property possible?
Thanks for your feedback.
Regards,
Igor

Hello,
Did you try to change the description of the service in transaction SICF ?
You can find the Webdynpro services under the tree /default_host/sap/bc/webdynpro/sap/.
Regards,

How to add authorization field to a standard authorization object

Hi All,
I'm trying to limit user to can only create & change X type of order type in PM module. This can be fullfill by creating suer with assigned role with only allow X type of order type.
But when I assigned a display role which has authorization to display all order type (maintained as authorization object), now my user can create and change all order type.
How to limit user to can only create & change X order type and only display the rest of order type?
I assume by adding authorization field: AUFART(order type) in authorization object: I_TCODE will solve the problem, is it right? and is it possible to do that?
regards,
Andre

Hi,
your assumption is incorrect. First of all, adding a new field to standard authorization object is a bad idea. You would have to modify all checks for that object. For standard SAP object it means that you would have to modify many SAP programs.
The authorization object I_TCODE is checked in PM transactions. It gives you authorization to run that transactions. That object can't be used to limit what you do in that transaction or what order type you can process. You are looking for some other authorization object(s). You need to go to SU24 which gives you what authorization objects are checked in particular transaction. It does not have to cover all objects but it's a good starting point.
Cheers

Add a tab in Standard SAP Screen in ECC 6

Dear Experts ,
I have to add a additional tab for a SAP Standard screen .The t.code is FMCACOV and System is in ECC 6. Please let me know to do this which enhancements techniques have to be follow? Enhancement framework OR Badi OR Screen exit?
pls suggest me

Hi,
The main steps:
define your own search help
add it to collective search help KRED
Be aware that it's a modification on standard SAP object.
Best regards,
Peter

SAP object enhancement using abap objects

Hi
I am enhancing a standard SAP object using ABAP objects.
I need to add 2 more fields to the struct in that object.
My qn is : how to redefine the parameter type of a method in standard class?
the code is
DATA: lt_list TYPE RCF_T_LIST_MASS_PROC_ACT_X.
CHECK me->start_selection EQ true.
CHECK exist_exception( ) EQ false.
DATA lo_ex TYPE REF TO cx_hrrcf.
TRY.
CALL METHOD me->ref_mass_proc_bl->get_mproc_cor_list_info
EXPORTING
mass_proc_cor_list = me->sel_mass_proc_cor
IMPORTING
mass_proc_list_info = lt_list.
CATCH cx_hrrcf INTO lo_ex.
add_exception( lo_ex ).
ENDTRY.
plz help me
if anyone provides code for this is appreciable.
Thanks

Hi,
either you can use the append technique <a href="http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ebc9446011d189700000e8322d00/content.htm">Append</a>
or you can define an additional import parameter.
Best Regards, Edgar

Adding additional sap object BUT000 in dms object link.

Hi Experts,
My requirement is adding business partner (SAP object BUT000 ) in DMS object link.
BUT000 is not present as standard sap object list in object linking.
I have gone through SAP documentation and understood following things.
1) Program two screens for the following module pools for the SAP object that is to be linked additionally:
     u2013 SAPLCV00
     u2013 SAPLCVIN
question start: Does this means add one screen lets say screen 5000 to function pool SAPLCV00 and
                        add one screen 5000 to function pool SAPLCVIN with SAP access key.
question end:
The process logic must be according to that of screen 0204 in program SAPLCV00 and must not be changed.
question start: Does this means simply copy PBO and PAI of screen 0204 and put it in screen 5000.
question end:
Create the function module OBJECT_CHECK_XXXX (XXXX = name of the SAP object).
question start: does this means create FM OBJECT_CHECK_BUT000 in my case.
question end:
If this object can be classified, this function module already exists in the standard system. Otherwise, copy the existing function module OBJECT_CHECK_EQUI (linking of equipment) and change it to suit the new object.
question start: does this means if FM OBJECT_CHECK_BUT000 does not exist in SAP system create it by copying
                        FM OBJECT_CHECK_EQUI.
                        Is it ok if I keep the logic of FM OBJECT_CHECK_EQUI as it is.
question end:

Hi Sunil,
For adding new object first maintain this object in key fields in spro.
You need to add the DMS sceen to the perticular object sceen with screen exit.
The object sholud reflect in DMS and DMS screen should reflect in object t-code.
Check in SE80 if there is no screen exit available for the object ,need enhancement.
I hope this will help you much.
Regards,
Ravindra

Lsmw SAP object structures

Hello,
Can anyone tell me how the source file should be created when using multiple structures as it is used in standard SAP objects.
How does the tabular seperated file look like?
How do you link 1:N relationship in that very same file? Is it possible to, for instance, have multiple suppliers in one file and that there are multiple supplier accountsgroups.
So than you would have per supplier account group multiple suppliers where there are more than one supplier account groups.
I just can't find how such a source file should look like.
Regards,
Manfred

Hi Manfred,
Would you please check the below help....
http://help.sap.com/saphelp_nw04s/helpdata/en/87/f3ae74e68111d1b3ff006094b944c8/content.htm
Regards,
S.Manu.

SAP Objects

Hi,
I like to do the changes in Standard SAP Objects But it does not allow me to do the change.
Regards
Rajanikanth

Hi,
We can do the Changes ..For that we have give Previlage in Software component in SLD but it is not advicable to do it in the SAP BAsis Objects...It might create issue when the object is used for some other functions.
Try to copy and do the Changes..
Regards
Agasthuri Doss

No changes on SAP objects allowed

Hello!
I've installed "minisap" for ABAP programming. But when I try to create program I receive the following message:
"No changes on SAP objects allowed
Message no. TK 220"
Could anyone help me with it?

On the face of it, it seems you're trying to change the standard SAP objects (programs). Could you specify which program you're trying to change / add ?
Remember, all your new programs should begin with either a 'Z' or 'Y'.
or
look TA: SE03-Administration-Set System Change Option
Re: No changes allowe to SAP system objects

How to find the Access Key of Standard SAP Function Module

Hi Experts,
I have to change one sap standard function module.
so how can i know the access key for that function module.......
Regards,
DS

Contact the Basis Consultant in your project.
The access key for standard SAP objects can be obtained from service.sap.com under Keys and Requests.
Note 86161 - Registering developers and objects

Partial activation in standard SAP object

Similar Messages

Maybe you are looking for