Domino Web Access is working but I can't reach my mail
I can't see my incoming mail or the older.
Here is a little more info...
If I type: http://192.168.1.2/~alfredo It converts the ip address to my machine name dot local (imac-g5.local) and I get an error that it "Can't find server at www.imac-g5.local
But if I can convince it to not convert the ip address to the machine name, it works.
So, why is it converting the ip address? I also tested it from my other Mac and it behaved the same, using ip works, if I let it convert to imac-g5.local it can't find the "server".
Any ideas?
Thanks,
Alfredo
Similar Messages
-
Since installing the newest version of Firefox 4.0, I am unable to access my work e-mail which uses Lotus Domino Web Access. Can anyone please tell me how to correct this problem?
Sheesh. That looks hard. I think it will fall over at this point:
"Connect to my Exchange mailbox using HTTP" 'cos Thunderbird uses only the regular email protocols: POP, IMAP and SMTP.
Here (at work) we have in the past have had IMAP and SMTP enabled on our Exchange server so Thunderbird could then connect just like to any other regular internet-based service.
With the change here to outlook365/outlook 2010 I've had to switch to using DavMail which lets Thunderbird talk to the mail server using OWA.
I haven't (seriously) tried Exquilla. Whilst I have great respect for its author and some of his other add-ons, I saw no reason to use an add-on that required payment when DavMail works for free. -
I have updated to ios 7 and Microsoft outlook web access for work emails no longer works nor my remote access can you help
This happened to me as well. I read somewhere else that resetting the network settings (General, Reset, Reset Network Settings) would help and it partially did. I get half (the folders) of the Web Access screen rather than a blank screen. I tried tihs a few more times and got the right half (the messages) on occasion but never the whole web page.
-
When I bring up Safari on my IPAD2, the web page comes up, but I can't scroll down the page. This just started today. No matter what web site I go to, the content is darker than the navigation pane.
If it's happening on all sites, then assuming that it's Safari that you're using, have you tried clearing it's cache : Settings > Safari > Clear Cache (other browsers should have similar options, possibly within the actual app instead of within Settings). You could also try closing the app completely : from the home screen double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app (or whichever browser you're using) to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
If it's only happening on a particular site then there may be content on that site that isn't supported on the iPad e.g. flash, java, silverlight -
After going for a few years without using my iTunes account I bought an iPhone and am trying to access the old songs I purchased. The username and password worked, but I can't locate those songs. Have they been deleted?
Hello Bennett,
The following article provides a comprehensive guide to locating and downloading your past purchases, should they be available for download.
Download past purchases
http://support.apple.com/kb/HT2519
Cheers,
Allen -
Firefox 4.0 beta 8 doesn't show tab label in IBM Lotus Domino Web Access while earlier version of FF and other IE do.
neuwerld wrote:
Ohh thanks guys!
It worked as a charm, and thanks Brisbin33 for the autostart.sh tip.
So the thing that caused my whole system not to work as it should was that I forgot to put a "&" after conky?
haha that´s kinda anoying I have been sitting and looking through like a milllion files looking for the answer
But again, really thanks!
/Neuwerld
that little "&" sends the conky process to the background freeing up the current process (your autostart.sh script) to finish doing what it's doing so you can move on to running openbox itself. with this in mind, it should be obvious why keeping conky in the foreground would cause problems.
also, replacing it with (sleep 1 && conky) & means... wait a second, when that's done successfully (&&) run conky, and put all of that () to the background. that way openbox comes up immediatly and only a second later you've got your panel and monitor.
all this after .xinitrc and before openbox -
When I use FireFox to Open Lotus Domino Web Access after a few minute the browser will not allow me type consistently. This happened before around version 13 or 14 but went away. The mouse works perfectly except when clicking on window to open new tab.
I have uninstalled, reinstalled current version 16.0.2
I have uninstalled, reinstalled earlier version 14
I have started in Safe Mode
I have disabled all add-ins except for "Remote XUL Manager" which is necessary for Lotus Domino Web Access.
I force closed using Task Manger and restart and it will work for a few minutes then start the same issue. I can not type "letter by letter" , if I hold a "letter" key down it will repeat the letter albeit at a slower pace.
Unfortunately I installed Windows 8 which has IE10 (which cannot access Web Mail at all) so I have resorted to typing in a word document and pasting into emails within Lotus just to function.
The site is not accessible for outside testing as it occurs post log in to site.Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies" -
IBM's Lotus Domino Web Access compatibility with Mozilla Firefox 4.0.1
Why I couldn't retrieved my emails when using the Lotus Domino Web Access?
Currently I'm using DWA Release 6.5.6You can view all email in full mode in firefox/mozilla. You will have to do following setting: -
1. Go Add-ons under tool, find add-ons "Remote XUL Manager" and install it.
2. Restart browser and click Remote XUL Manager under Web Developer. You will find Web developer under orange Icon of Firefox at the top of browser on left side.
3. Launch Remote XUL Manager and click Add then provide full web link of your email access without http:// and click OK
4. After add it, go in File and click Generate Installer and save it in your profile, if you will not get profile location then save it in C drive or anywhere, as you want.
5. Now restart browser and lunch your email again. If you get message with option "Allow" or "Deny" then check on "Always remember this setting" and "Allow", it will repeat this three to four time and save. Now you will see all emails with attachment in full mode. Keep in mind if you attach file in new email it will ask again allow or deny then allow it and check, remember this.
Enjoy. (in case of any problem, let me inform.)
Thanks -
My add-ons still appear to be installed and working, but I can't install more, or uninstall, or configure them.
Try forcing Firefox to rebuild the list of installed add-ons.
# Open the profile folder, for details of how to access it see the [[profiles]] article.
# Close Firefox, then delete extensions.sqlite (you can also delete extensions.cache, extensions.ini, extensions.rdf if they exist)
When you restart Firefox the list of installed add-ons should be rebuilt.
If that did not work, you may have an add-on that is causing the problem, try the options in the [[troubleshooting extensions and themes]] article.
If you type '''about:addons''' into the location bar does that bring up the list of add-ons? I have seen a blank add-ons list if Mr Tech Toolkit add-on is installed, accessing the add-ons manager by typing about:addons in the location bar is a workaround with that add-on installed. The author of that add-on is working on an update. -
Whenever I try open my mail in Lotus Domino web Access I get an error message
'''Domino Web Access Warning. Sorry, we were unable to process your request at this time. If you are unable to continue working in your mail file, please dismiss this warning and then select View, Reload from your browser's menu. ''' Even when I reload the page I get the same error. I need a solution to this pleaseI currently upgraded to Firefox 8.0
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies" -
My buttons and screen work, but I can't activate the screen to see what I'm doing. This is after water damage. Any idea what is wrong? I'm not sure what to fix..
I know the screen works because when it first turned on I saw the apple logo and then the screen. If I hold the home and power button, I see the apple logo when it resets. Then it goes blank again.
I can hear when I get a call and pick up, and I can stop the sound and/or decline the call with the power button and side buttons. It also still vibrates. I'm confused - if the screen works, the buttons work, it vibrates, makes sound, and the touchscreen feature also works... what is wrong for me to fix? Why can't I see anything?!
I appreciate any help anybody has to offer!!!I apologize for the confusion. This was literally the only option on Apple's "Contact Us" section that I was able to access. I assumed that Apple's clear intent to have me go here instead of speaking with someone in live time, and the fact this is on the Apple website, meant I could get some advice... Both over the phone and online they require information I need to see my screen to provide so those are not options. I tried to bypass this when calling through Skype. Some lady who didn't know what was going on, who I waited a good while to speak with, put me on hold; I gave up after 30minutes of waiting to speak to somebody again.
I've stumbled upon a few tricks to help me get through this problem, but I'm at a loss. I need this phone to work until late December. I need more tricks. So yes, it's worth understanding. Knowing what is going on will let me Google it and work with it, if nobody here is willing to help...
And yes, it IS a glitchy phone. It has been a glitchy phone for a long time. Long before this. But completely unrelated issues. I was assuming this wasn't just a glitch but something maybe somebody could help me understand. -
I can not connect to a web site at office, but home can
I can not connect to a cfml web site at office, but home can...well I copied ste file from home to office but didn't work, well?
If it's in an office that you are having trouble connecting I would highly recommend consulting with your IT department in the office to ensure that they are not blocking the connection with the corporate firewall.
-
I have an ipod touch 4g it was just Fine and today i tried to plug it to my laptop to sync music and it suddenly turned off and it didn't work for 15 mins and then it worked but i can no longer sync apps or music plz help me as soon as you can
If you have not taken the iPod apart, Apple will exchange it for a refurbished one for $99. You can do it an an Apple store
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Or sent it to Apple -
word has stopped working on my macbook air, i have used it before and powerpoint etc are all still working, but i can no longer open word or word files can anyone help?
Hi Rachel,
Have you tried reinstalling Microsoft Word? Have you tried reinstalling Office? Have you run any updates recently for Microsoft Office? There was one that came out this week. You may wish to ask this question over at the Microsoft Word forums, there's a good chance you'll get a better answer as well. This forum is primarily designed for the MacBook Air hardware and interoperability with OS X on a MacBook Air.
http://support.microsoft.com/gp/cp_macoffice2008_master -
hi there can any one help me i have a iphone 5 but my mobile data is not working but a can connect to my wifi no bother
talk to your carrier about the data subscription and possible settings changes to their apn than
Maybe you are looking for
-
How to get week & quarter for entered date
I need help on below query 1) when i enter date, it should bring previous & further week of that month. As per my requirement my week starts from Saturday to Friday. Lets say that i am entering 24.01.2006, then it should bring week 1 from 7th Jan to
-
Count before and after to certain occurance.
I am trying to count the amount of units studied before and after a certain Course was taken. So ID 1 did PREP in 2013 in the first period and has and also had done a unit in 2009 so reult be before prerp count 1 ID 2 did PREP in 2012 first period a
-
Transaction Code Search by Keyword
Is there any way to search for appropriate transaction codes by keyword search without knowing any transaction codes? For e.g. type: Display Report or Display Table and not know the transaction code for that? I already know about Tables: TSTC and TST
-
Can't get vbscrip to connect to Oracle Database
Hi, I really need some help please as I’m new to vbscripting and TNS connections and all this complicated stuff. I’m trying to make a connection from one of our Oracle servers and extract some basic data but after trying for a couple of days I’m stum
-
Hi, I have a 2 month old US N80ie with firmware V 4.0632.0.38 and when I check on the Nokia site for updates it tells me this is the latest, BUT I keep seeing V4.0707.0.7 in the posts...should i get this ? and if so, how?? ALSO, i keep getting out of