Dose the airport extreme come with a internal hard drive connector

Dose the new airport extreme come with a internal hard drive

If you want an internal drive, go for the Time Capsule. It wouldn't make sense to launch two AirPorts that are the same but one does not include a hard drive even if it comes with the hard drive connector.
Another option you have is to connect an external hard drive to your AirPort Extreme

Similar Messages

  • HT1145 The airport extreme used with my iMac is not seeing my other devices...anybody, please?

    The airport extreme used with my iMac is not seeing my iPhone 5, iPad (third generation) or my windows based PC.  When I open the airport utility it shows only the internet and my iMac.  It does not identify the others.  Any thoughts?  Thanks

    Hi DaileyT,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at this article:
    When do Apple wireless devices appear in AirPort Utility?
    http://support.apple.com/kb/HT3624
    Troubleshooting missing devices
    If your Apple wireless device doesn't show up in the wireless device list, try the following:
    Check to see that the device is turned on.
    Check that the device is connected to the network via Ethernet or in wireless range of your computer.
    Make sure the device has had adequate time to start up and become discoverable. In the case of Apple wireless devices that are not connected via Ethernet, AirPort Utility scans for new devices once every 15 seconds. From the time a device becomes discoverable (typically around one minute), it could take up to another 15 seconds before the device is displayed in the list.
    If you have just configured a new Apple Wireless device, upgraded the firmware, selected "Restore Default Settings..." or have hard reset and configured an Apple wireless device and it does not show up in AirPort Utility after restarting, you may have an incorrect setting. You may want to hard reset the unit and set it up again.
    If you are connected to a specific wireless network, all Apple wireless devices which make up that network will appear. However, if you "Restore Default Settings..." from AirPort Utility, or hard reset a device that is out of physical wireless range of the computer, you will need to move the device closer the computer to configure it again.
    Best of luck,
    Mario

  • I have an imac g4 purchased Dec 2003 runnung OS 10.5.8.  It runs fine with airport off, but when I turn airport on it freezes with the black page,  "restart by holding power key . . ."  I swapped the airport extreme card with the one in my ibook G4 (purch

    i have an imac g4 purchased Dec 2003 runnung OS 10.5.8.  It runs fine with airport off, but when I turn airport on it freezes with the black page,  "restart by holding power key . . ."  I swapped the airport extreme card with the one in my ibook G4 (purchased same date and running same OS).  No change in operation.
    I am running wifi from verizon.  Recently changed from mifi2200 to jetpak 4620 in a 3G location.  Ibook running fine, desktop freezes.  If I can boot desktop in safe mode and get airport turned off in time. then I can reboot regularly and imac runs flawlessly with no wireless.Have run disk utilities and TechTool Pro rebuild etc, but nothing has worked.  How do I fine the culprit?

    the power logix thing was really sad. apple changed so much after 10.4.8 that there wasn't a viable way to patch the software.
    That statement is precisely why I don't believe in blindly updating the OS, especially in a non-standard machine.
    We can't expect third parties to support us forever, and it is shameful to break something that works fine, except that we updated the OS....
    I think that any upgrade or modification to a machine or the OS greatly increases the risk of trouble or incompatibility with current configuration and "new" system files.
    After all, the component or software could only be tested as far as the current OS version when the component or software was released.
    Beyond that, we are all "beta testing".
    Following a beta tester protocol, and applying updates to a cloned system drive first, is a prudent way to approach updates, and not only for older, heavily modified machines.
    After 10.4.8 and moreso with Leopard, the focus is primarily on Intel architecture, not PPC architecture.
    Like it or not, we are all updating to the abyss of the extinction of our machines, unless we can be satisfied with the last stable version of OS that works well with our hardware and software.
    I wish they would include the latest pkgs at least with software update.
    Yes, having individual packages, rather than lump "OS X 10.x.x" updates would be nice.
    This way, one could update as one sees fit. That is to say, for example, fix the Quicktime, but leave my Network alone, etc., etc.
    In all fairness, Apple does provide for some breakdown of updates, but I believe there is much room for improvement, especially, as you point out, with regard to the core services portion of the OS.
    Until then, I'll leave Software Update disabled.......

  • Will the airport extreme work with Iphone 4 and Ipod 3 gen without a pc or mac.

    will the airport extreme work with Iphone 4 and Ipod 3 gen without a pc or mac.

    You can setup an Airport device using the Apple Airport Utility for iPhone
    Download it for free in the App Store on your iPhone...
    It's under "Utilities" and the "Top Free" utilities.

  • Can't join the airport extreme network with my iphone~~please help

    Can't join the airport extreme network with my iphone

    What radio mode do you have the 802.11n AirPort Extreme Base Station (AEBSn) configured for? (ref: AirPort Utility > Select the AEBSn > Manual Setup > AirPort > Wireless > Radio Mode = ?)

  • Airport extreme doesn't see my hard drive (free agent 500Gb)

    airport extreme doesn't see my hard drive (free agent 500Gb)

    A few things to check are:
    Make sure that the drive is formatted in Mac OS Extended (Journaled) or FAT32. The normal Windows format of NTFS will not work.
    The USB port at the AirPort Exteme is under powered. You almost always need to use a powered USB hub with a drive at this port, even if the drive has its own power supply.

  • New IMac 27"with dual internal hard drives

    How do I manage Data on my new IMac 27"with dual internal hard drives?  I have just migrated my data to my new computer.  Since I've done it from a TM backup, it all went to the Analog HD. Ressearching online I've figured I could re-run Migrating assistant and replace different data between the SSD and the Analog.  My problem now is: I want to keep my Music Library (iTunes), my Aperture Library and my documents on the analog, and use the SSD for System, Users and Apps.  Aperture, is easy, because both Aperture and iPhoto can find their way, bt iTunes and My documents are a issue.  Can Anyone help me?

    Install OS X on the SSD:
    Install or Reinstall Lion/Mountain Lion from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
      1. Select Disk Utility from the main menu and click on the Continue button.
      2. After DU loads select your SSD volume (usually Macintosh HD) from the left side list. Click on
          the Erase tab in the DU main window.
      3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button and set the Zero
            Data option to one-pass. Click on the Erase button and wait until the process has completed.
      4. Quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion/Mountain Lion and click on the Install button. Be sure to change the target disk to your SSD.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    After you boot from the SSD open Users & Groups preferences. Click on the lock and authenticate. CTRL- or RIGHT-click on the user account and select Advanced Options. You will see a Home Dir: field with a Browse button on the right. Click on the button. Navigate to the HDD's Users folder. Select your account folder then click on the Open/Choose button. You must restart immediately.
    Upon the restart your SSD system will now be using your actual Home folder located on the HDD. You can then go about installing your applications or copying them from the HDD to the Applications folder on the SSD (and also from the Utilities folder on the HDD to the one on the SSD.) You will likely need to do some transfers of the Applications Support and Preferences folders found in the main Library folder.

  • I currently have a mbp with two internal hard drives ( took super drive out) which for a video editor like myself is a dream I can edit video anywhere, my question can I order a new mbp with 2 internal flash drives?

    I currently have a mbp 2.3 gighuz intel core 7 16 gig of ram with two internal hard drives ( took super drive out) which for a video editor like myself is a dream I can edit video anywhere, my question can I order a new mbp with 2 internal flash drives?

    I wouldn't think so because the newer ones with Retina displays don't have an internal SuperDrive that can be replaced. Therefore the newer logic boards wouldn't have the two SATA/SATA Express connections on the logic board.
    At least that was the case as of 2012. I've seen newer ones and they also don't have a SuperDrive.

  • How do I remove server os and install normal os?  The computer has never been used as a server.  I only purchased the server version because of two internal hard drives.

    How do I remove server os and install normal os?  The computer has never been used as a server.  I only purchased the server version because of two internal hard drives.

    If you want to just disable the Server aspect, this should work for both Lion and Mountain Lion...
    http://support.apple.com/kb/HT4827
    If you want to completely start over, backup your /Users and /Applications directories and re-install the client OS.

  • AirPort Extreme does not see printer, hard drive, AirPort Express!

    I just got an AirPort Extreme (802.11n), to replace my AirPort Express. I have a Brother 665CW wireless all-in-one printer, which had worked perfectly but now I cannot find it. I have also hooked my USB hard drive into the Extreme. I can see the hard drive in the AirPort Utility, but I don't know how to find it from my iBook. I'd also like to put the Express in another room to use the AirTunes feature. Unfortunately, almost nothing is working!
    Here is how it's set up:
    Den:
    AirPort Extreme - hardwired to:
    - DSL modem
    - hard drive (via USB)
    Brother 665CW (wireless)
    Living Room:
    AirPort Express
    Advice would be appreciated. I'm usually able to troubleshoot my problems, but documentation on this Extreme is really bad! Thanks!
    iBook G4   Mac OS X (10.4.9)  

    I had problems adding Airport expresses using Airport Utility. However I found it worked fine if I used the manual set-up option and not the Assist me option.
    Reset the airport express then, in manual set-up, set the express to 'join an airport network' add the airport network password and see if that works

  • Hi,does anyone know how the Iwatch will play music when it is not near a bluetooth device as it is stated in the feature setting..Icloud streaming,internal hard drive?

    Hi,does anyone know how the Iwatch will play music when it is not near a bluetooth device as it is stated in the feature setting..Icloud streaming,internal hard drive?

    I did not hear them state the feature requirements directly in the streaming even but there are statements on the Apple website that clearly say that an iPhone is necessary.  I'm guessing that other than Bluetooth for pairing with the iPhone, it's just not technically possible to fit any other radios such as WiFi or LTE into that form factor or battery capacity.  I don't even remember them mentioning if it had a speaker or could pair directly with bluetooth headphones.
    While I'm hoping that the watch has a reasonable stand-alone feature set, they didn't make it clear what exactly it can and can't do without an iPhone nearby.  I also hope that they communicate this better in the coming days.

  • How can i use the airport time capsule as a external hard drive?

    how can i use the airport time capsule as a external hard drive?

    Why do you recommend not place things like iTunes libraries or photo libraries on the drive? It was what I am looking for...
    I suggest that you ask the experts over in the iPhoto Support Community about their opinions on placing an iPhoto or Aperture library on the Time Capsule....even if you plan to use a wired connection for your Mac and the Time Capsule.
    But, if Terrence Devlin answers, be prepared for a lecture about why you should not ever do this.
    If you place the iTunes library on the Time Capsule, be prepared for iTunes to give you messages about not being able to find the library.
    In addtion, LaPastenague has the answer for you in a nutshell......corruption problems.
    Bottom line....the Time Capsule is for your backups.....not "everyday" files and especially not libraries.

  • Is the airport extreme compatible with windows 7 professional???

    Desperately trying to figure out if the airport extreme is compatible with windows 7 professional..

    Hi - the answer is yes - it is compatible - most of the computers in our office use Windows 7 Professional and we have 10 Extremes in the network.

  • Make a hard drive attached to the Airport Extreme work with Time Capsule?

    I have an external hard drive attached to my airport extreme that shows up on my desktop as if it was attached locally, but time machine recognizes it as the wrong format. In the Get Info screen, the drive's format appears to be 'Appleshare', when it is actually Mac OS Extended (Journaled). How can I make it appear as Mac OS extended again?

    There is nothing wrong. The drive will appear as Appleshare since the AirPort Extreme base station (AEBS) is providing file sharing services. That should not be a problem for Time Machine use.

  • Dose the ipad mini come with a charger

    Be for i order the ipad mini i want to know if it comes with a charger??

    Yes, the iPad mini comes with a 5Watt power charger, and the iPad mini with retina display comes with a 10Watt charger.

Maybe you are looking for

  • MDB Accessing datasource

    Hi, I have a question regarding MDBs accessing a datasource. Since application servers create a pool of MDBs that will consume messages, how should the datasource be retrieved efficiently? public class MDB implements MessageDrivenBean, MessageListene

  • Dynamic Graphics - Image not clear in HTML page

    Hi, i tried to generate the image from Dynamic Graphics( 3D Dial gauge). It creates successfully but when i show this image in HTML page it is not clear i.e values and arc are showing like points and words in description also shows as splited. How to

  • Why cant I view my "purchased" apps on my  iPhone 3GS ever since I updated to the IOS 6? and now update IOS 6.1 didn't fix the issue :(

    I have noticed that my iphone 3GS,the app store crashes when trying to view "purchased" apps. I never had this problem until I updated to IO6. I still I have the problem with new update IO6.1.  Its only in my main itunes account [email protected] tha

  • USB stick dies in iMac, another won't read, what's happening?

    Hi there. I have recently had the experience of a USB stick (4GB) die in my iMac. I plugged it in, an error dialog box came up saying that one USB device was drawing too much power... the port on the USB stick had gone very warm and there was a burni

  • Regarding Disconnected Client

    Hi I have installed Oracle BI Server on one system and Client and Presentation services on other system. So can any one tell me how to Install Disconnected Client. I have tried to install Disconnected Client on the system where client is present but