DoSubmit is not defined, error after upgrade to 2.0

Hi,
When I try to log into my workspace I get the following javascript error:
Error: doSubmit is not defined
I have just upgraded from 16. to 2.0. Any ideas?

The source looks like this:
<script src="/i/javascript/htmldb_html_elements.js" type="text/javascript"></script>
When I paste the below url into the browser,
http://wmsi001370:7778/i/javascript/htmldb_html_elements.js
The javascript code is displayed fine. So it looks like the code is where is should be?
But doSubmit is not defined in that file. But there are other includes som maybe it is defined in those.
Message was edited by:
wmpelor

Similar Messages

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2. I've erased and reformatted the drive; reconnected Time Machine(it saw it) and began a new backup. The backup starts again but fails before completing with backup drive not found error. I used the 10.7.2 combo update. Any help on how to fix this problem would be appreciated.

Arghhhhhhhhhhhhhhhhhhh!!!!!!
After waiting since October for a fix, I have now upgraded the firmware on the Time Capsule and installed the new Airport Utility, released yesterday, and the situation is even worse.
Up until now, the Airport Utility had an option to disconnect all drives manually and the Time Capsule would then work until the next reboot – a temporary (?) work-around.
Now that option does not exist in the new-look Airport Utility. And the Airport Utility installation can’t be rolled back and the old utility won’t restore.
The sparesbundle is still not accessible. Anyone worked out a work-around in the new environment yet?
I have another Time Machine backup working fine to a trusty old Lacie Drive so erased the one on my Time Capsule to see if that works. I have renamed the Capsule and the Time Capsule Drive. But to build another full backup will take at least two days and I shall be away from tomorrow and am reluctant to leave the Capsule and computer up and running for a week. And I’ll bet the sparsbundle will still be nowhere to be found.
How can Apple screw up so badly when they are to become the richest company in the entire world and – soon – will have more cash in the bank than the entire United States? Can’t they afford someone who really can sort this out? Especially when a Firewire connected hard drive – my trusty and simple LaCie – works fine.
Words, almost, fail me.

SubmitForm is not defined error after JDeveloper 11.1.1.6 install

Just installed JDeveloper 11.1.1.6 and opened a project that was originally created in 11.1.1.4 and worked fine in 11.1.1.5. Now, when clicking on a JSF commandLink (h:commandLink), I receive the following error in the web browser console:
Uncaught ReferenceError: submitForm is not definedI figure there is a missing or mis-matched JSF or ADF library somewhere in the install that calls the commandLink submitForm() JS method, but I cannot quite pinpoint it. Any help would be appreciated. Thanks.
UPDATE: My web.xml has the following:
<servlet>
    <servlet-name>resources</servlet-name>
    <servlet-class>org.apache.myfaces.trinidad.webapp.ResourceServlet</servlet-class>
</servlet>
<servlet-mapping>
    <servlet-name>resources</servlet-name>
    <url-pattern>/adf/*</url-pattern>
</servlet-mapping>Weblogic 10.3.5
Edited by: MattC on Jun 1, 2012 2:26 PM

Frank Nimphius wrote:
Matt,
from the web.xml you posted this looks okay as it defines adf/ as a URI for resources that should be handled by the resource loader servlet. Do you use any kind of JavaScript in the form yourself? From the error message it would point to an invalid JavaScript syntax being used
FrankFrank,
Thank you for the reply. I do use JavaScript in the form, however there is no duplicate "submitForm" method defined or called within this custom JavaScript. There are no other JS syntax errors indicated on the page. The only change from the time I did not and did receive this error was upgrading to 11.1.1.6 from 11.1.1.5.
Matt

404 page not found error after upgrade to 4.0 from 3.x

We developed this application in 1.6 and a couple years ago upgraded to 3.2. We've just upgraded the Production version to 4.0.0 (that's what was on the Dev box). I understand that the template we used when developing it is now obsolete and I added some stuff to make it work properly (found tips here). In Dev it seemed to work correctly but now that it's in production we're getting a 404 Page not found error which "seems" to only occur after a search returns some results and you change the search criteria and try to rerun the search with this modified criteria without first leaving that page (if you click to a different tab and back before changing the search criteria you don't get the error). It doesn't matter which criteria field you change (date, text, LOV) the error comes up consistently. The criteria is submitted via a button (Go request). It's a PL/SQL function body returning SQL query. The only processes that are run is a Reset Pagination on the Go request.
Is there some quick setting that can be changed that causes this? Or something in 4.0 that is different that I need to change when submitting a page, etc... I can't see anything in the debug & all the variables do have appropriate values.

A column in the search results was changed to a Simple Checkbox when we upgraded to 4.0 (it has always been a checkbox in the older APEX versions). When I put it back to Standard Report Column I no longer get the page not found error.
Is there some additional/different setting I need to do in order to use the simple checkbox option in a search results set?
ETA: I see now that Checkboxes are not intended to work in standard report regions so I'll change them to LOVs or something and my problem should be solved.
Edited by: mimi_jones on Jul 18, 2011 6:16 AM

Object name not found error after upgrading to Visio 2013

Hello,
I have a C# application which uses the Visio drawing control. I have been working on making it compatible with Visio 2013. I get an error using Visio 2013 which I did not get using Visio 2010. The error is a COMexception:
Object name not found.
That is all the error says. The code which causes it to occur is as follows:
Document document = axDrawingControl1.Document;
document.Pages["page1"].Drop(document.Masters["Dynamic Connector"], 0, 0);
It does not seem to matter whether I use Dynamic Connector or Rectangle or any other shape, the error still occurs.
Here's the weird part: I tried out this code in a simple app with a Visio drawing control to see if I could figure out how to make it go away, and the error was still occurring for a little while, and then the code magically started working without me making
any changes to it. Unfortunately, it didn't start magically working in the original application so I'm still trying to figure out what is causing it.
Thanks for your help!

Did the error disappear once you'd created a document and added a dynamic connector shape to the drawing? If so then there is now a Dynamic Connector master stored in the document stencil (where masters used in the drawing are contained).
Paul Herber, Sandrila Ltd. Engineering and software shapes for Visio
Sandrila Ltd

ITunes Helper.exe - Entry point not found error after upgrade

I just tried to install the latest iTunes software for Windows on two separate PCs running XP Pro SP3 and get the same error on both PCs at every windows startup: iTunes Helper.exe - Entry point not found. The procedure entry point sqlite3preparev2 could not be located in the dynamic link library SQLite3.dll. Is this a known issue with a fix?

Hmmm. Roy B has some advice on that one in the following post:
http://discussions.apple.com/thread.jspa?messageID=10208523&#10208523

Just Upgraded to 3.1.2 - doSubmit is not defined.

I just upgraded to the latest XE by running the download.
I am getting this error on the browser when I try to login :
Error: doSubmit is not defined
Source File: http://127.0.0.1:8080/apex/f?p=4550:1:1915389911065507
Line: 1
Any suggestions?
-SJ

Hello,
Did you follow all the post installation steps? (Updating the Javascript/CSS files etc?). If so, try clearing out your browser cache to make sure your browser is getting the latest files.
Hope this helps,
John.
Blog: http://jes.blogs.shellprompt.net
Work: http://www.apex-evangelists.com
Author of Pro Application Express: http://tinyurl.com/3gu7cd
REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone!

TS1277 "iPhoto was unable to connect to Photo Stream" error after upgrading to mountain lion

Has anyone gotten this error after upgrading to mountain lion on a computer that already had a user setup on it?
My iphoto was working with photostream and now it will not connect at all.
I ran fix disk permissions and once it showed up in iphoto, photostream was loading and then it disappeared again.
help!

FWIW I fixed mine when I realised I'd probably downloaded iPhoto using an AppleID from the App Store but logged into iCloud with a different AppleID. I deleted iPhoto and it's related files (but not the iPhoto Library) using CleanApp, entered the App Store with my usual AppleID and downloaded iPhoto again. Once the App Store, the downloaded iPhoto and iCloud logins were the same iPhoto Stream worked again.

Web page not loading properly after upgrade to 2.0

I have upgraded my ipod touch to 2.0 and I have had a few problems as 2.0 seems a little unstable. I'm sure Apple wll release a patch fix.
However I do have one problem with the upgrade which is annoying. I have a web page for my boys football (soccer) page which contains scrolling text within a web frame. This has always worked, but no longer does since the upgrade.
The URL is http://www.finchampsteadfc.co.uk/scriptsdir/team.php?season=0708&team=U8 if anyone has any ideas or is there a new setting I should use?
Thanks in advance

The source looks like this:
<script src="/i/javascript/htmldb_html_elements.js" type="text/javascript"></script>
When I paste the below url into the browser,
http://wmsi001370:7778/i/javascript/htmldb_html_elements.js
The javascript code is displayed fine. So it looks like the code is where is should be?
But doSubmit is not defined in that file. But there are other includes som maybe it is defined in those.
Message was edited by:
wmpelor

Error after upgrade CRS 4.0.4SR1 to 4.0.5SR2

Hi,
I've got some errors after upgrading my CRS 4.0.4SR1 cluster to 4.0.5SR2.
First my publisher's status stay in "patch" status for near 2 days now. I'm not able to change anything in the configuration, i've got this message "Config Changes are not allowed during 'Patch' operation, which was started by '_ccbu_build' at 'Thu Apr 08 04:31:04 CEST 2010 '. Please try again after 'Patch' is complete."(ERREUR02.jpg). How can I change this status?
Then I've got errors in historical DB which is working but not on the publisher only on subscriber. How can I resynchronize this DB?
Thanks for your help.

Thanks Tammy for the reply
We already tried the suggested SAP Note couple of time without any luck.
Regards,
SJ

Error after upgrading from sap b1 pl 35 to pl 49

hello sap experts
iam getting the following error after upgrading from sap b1 pl 35 to pl 49 this error is coming if we have given round off or discount in the below cell
"Discount deviates from authorised ranges (sales oreder-discount%for document) [message 439-15] pls make it as soon as possible an i will be thankful to those guys .
regards
Jenny

Hello Jenny,
You may check by supreuser account first to see if you got the same error. If not, it probably just related to user authorization. If yes, it must be a bug.
Thanks,
Gordon

Imac error after upgrade to 10.8.4

I received an error after upgrade tp brand new imac. Error was upgrade was not installed. Upon reboot the version of SW in About thi Mac is 10.8.4. Bug?
iMac i7, 21.5" 16GB memory, fusion drive.
Thanks for input. I assume the upgrade took.

Verify Permissions gave me some errors, I deleted the repeats and the permissions fixed lines:
Repairing permissions for “Macintosh HD”
Warning: SUID file “System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig” has been modified and will not be repaired.
Warning: SUID file “usr/lib/sa/sadc” has been modified and will not be repaired.
Warning: SUID file “usr/bin/quota” has been modified and will not be repaired.
+++ (multiple repairs)
Permissions repair complete
I verfied the HD
Much text (removed)...
The volume Macintosh HD appears to be OK.
I also loaded the Apple downloads version of the upgarde and received the following (again):
The Installation failed
The insatllation encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.
Message was edited by: Steve51K

"Limits not Defined " error while saving IT0008 in sap hr

Hi Experts
While trying to Hiring an employee, infotype0008 showing Limits not defined error and not allowing to save the record. I checked table V_T510 and V_T510N. All the limits defined in right way. Please check and advice. I attached copy of screen shot for your reference.
Regards
Prakash Bhave

Hi Remi
Thanks for your reply. As per your reply I followed procedure and it allowed me to save Basic Pay Infotype (0008)
Thanks a ton.
Regards
Prakash Bhave

Wifi is not working properly after upgrading 7.1.1 onmy i4s

Dear Apple
i realy appriciate on your work ..right now i am suffreing from a problem that one i mentioned in subject .sometime my wifi is working good and sometime it shos dead to me ..but now its not working well after upgrading my phone on 7.1.1....
its my humble request please find a solution and provide me as soon as possble..
my totally work on wifi .
and sometime it goes hang in setting when i come on setting folder and clicked on wifi its get hang and also showing wifi is not availabe..please provide me best solution
Thanx & Regards
Sam
+91-92555-04628

settings - general - reset - reset network settings.

"Page not found" error after 5 minutes of see "processing" on the screen

We are using WebLogic 8.1 server and also the WebLogic proxy as our front end. When a user runs a process that takes over 5 minutes using the Proxy URL they receive an IE "Page not found" error after 5 minutes of seeing "processing" on the screen. If they run it on none Proxy URL (directly on WebLogic server) it works fine.
We have looked into the WLIOTimeoutSecs parameter and set in the web.xml for both the HttpClusterServlet and HttpProxyServlet, but this had no affect.
Is there another timeout that controls this 5 minute timeout? It seems if one uses Apache and sets the WLIOTimeoutSecs parameter to a higher number than 300 seconds there is not an issue.
Did this parameter get omitted for the WebLogic Proxy and if so, what does one use?
Thanks,
Jim

Hello George,
Thank you for the quick reply. I will surely try the option suggested by you.
But what i was thinking is that as this is not a Connection Time Out (500) error, instead its a Page Not Found error, it would be Session-Timeout and not Connection Time-Out.
Maybe I should be looking at:
SESSION-TIMEOUT due to kernel:
Kernel parameter: rdisp/gui_auto_logout
Kernel parameter: rdisp/plugin_auto_logout
as per the SAP OSS Note: 705013
But again, I think this Note is pointing to the SICF service and IAC type of iView and not SAP Transaction type iView. Please advice.
Thanks,
Gaurav
Edited by: Gaurav Shah on Dec 4, 2008 9:37 PM
Edited by: Gaurav Shah on Dec 4, 2008 9:42 PM

DoSubmit is not defined, error after upgrade to 2.0

Similar Messages

Maybe you are looking for