Doubt in JMS to proxy scenario

Hi All,
I have a scenario, in which i need to send data from Tibco system to SAP ECC , where i am using JMS adaptor and proxies. For this do i need to create 2 diffrent datatypes, Message types or just i can create 1 datatype and 1 messge type and then create 2 different inbound and outbound? Please let me know. Thanks.
Regards,
Kalpana

Hey kalpana
why do you want to create just 1 data and message type?
is there any reason for that,usually we have to create data type and message type for JMS as well as for proxies.
are u confusing wid proxy?proxies replace adapters,they have nothing to do with data or message type.
is the structure of both sender and receiver exactly the same in ur case?
thanx
ahmad
Message was edited by:
Ahmad

Similar Messages

Doubts about my ABAP proxy scenario

Hi everyone.
I have this scenario. I think is simple but don't know how to do that. I have many questions for the forum.
An abap proxy has to start a process in the XI Server.
Data is stored in a R3 Backend and must be sent to XI Backend via ABAP proxy.
Both backends are different machines.
My doubts come here : how can data travel from R3 Backend to XI Backend ?
Do i have to define something so ABAP Proxies know where to send the data (url, ip .. )?
How can i define a ABAP proxy in a R3 Backend if integration repository definitions are in other machine?
Another doubt is ... why i don't have to make a receiver determination or sender channel in XI? because XI is listening in an url that has been defined in R3 Backend?
Regards.
Inigo.

HI,
Suppose if you are creating ABAP proxy with the ta SPROXY in ABAP stack of R3.
this is not backend.
see the below links
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
http://help.sap.com/saphelp_nw2004s/helpdata/en/48/d5a1fe5f317a4e8e35801ed2c88246/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/ba/f21a403233dd5fe10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/41e08c90-0201-0010-9197-d8774336ea78
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0ae9874-109c-2910-f48a-e91f0cdd1c81
/people/sravya.talanki2/blog/2006/07/28/smarter-approach-for-coding-abap-proxies
regards
Chilla

Proxy to JMS and JMS to Proxy - Szenario

Hi @all,
i've implemented an async scenario:
Proxy to JMS (away, request)
JMS to Proxy (way back, response)
Backend is ECC 6.0 and Middleware is PI 7.1.
Business Case: Run a request with a number, get an answer back with an entry. The number is an individual criteria which is not included in the answer. So I decided to write the number in JMSCorrelationID, therefore I've written an UDF in Message Mapping.
I've checked the JMS Correlation ID in additional properties and also added this into the list of additional properties:
key.0 -> read xxxx DCJMSCorreleationID
value.0 -> DCJMSCorrelationID.
First question: is there something what I should account for in JMS receiver channel?
At the way back I've implemented another UDF for writing the JMSCorrelationID back to payload in message mapping.
But I'm not sure that works. The coding looks like:
try
DynamicConfiguration conf = (DynamicConfiguration)
container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey KEY_JMSCorrID = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/JMS","DCJMSCorrelationID");
String a = conf.get(KEY_JMSCorrID);
catch(Exception e){}
return a; //a is an input field for the payload back to SAP backend.
Second question: is there something what I should accound for JMS sender channel? Do I need to add the DCJMSCorreleationID to the list of additional properties (JMS Correlation is checked)?
Thanks in Advance,
Stefan

Hi,
thank you for your answer.
The Proxy to JMS scenario works well and overwrites the JMSCorrelationID given by a number from message payload.
Could you please take a look at the given udf-coding that belongs to JMS to Proxy Scenario?
Is it possible to get the JMSCorrelation at this way?
I also put in JMS-Sender-Channel the JMSCorrelationID into the additional JMS-Message properties and checked "correlation-id from jms message" in adapter specific message attributes.
In Module-Tab of JMS-Sender-Channel i put the module-configuration in a way like this:
-> key.0 insert http://sap.com/xi/XI/System/JMS DCJMSCorreleationID
-> value.0 DCJMSCorreleationID
Do you think that works?
I could not verify this configuration until I get an entry in outbound queue so I can't make tests to that.
In Message Mapping - Test a Null Pointer Exception Occurs, according to the UDF, because I'm reading the DCJMSCorreleationID which is not present at mapping ad hoc test - I think that is ok.
Thank you in Advance,
Stefan

JMS To proxy Runtime error

Hello,
I am doing a JMS to Proxy scenario, so in mapping at run time i am getting
an error as:
Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 30, 30, 20(:main:, row:1, col:3) com.sap.aii.utilxi.misc.api.BaseRuntimeException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 30, 30, 20(:main:, row:1, col:3) at com.sap.aii.mappingtool.tf3.rt.xparser.MTSaxHandler.run(MTSaxHandler.java:157) at com.sap.aii.mappingtool.tf3.rt.xparser.XParser.run(XParser.java:73) at java.lang.Thread.run(Thread.java:534) Root Cause: com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error:
My source file is :
00 QY040 AM01- NBG IABENT21 A 6257069 21 00000020001 20070301200703030002167440 429900000002167440teealm tezste A:10245980-1; 1/1; I/EE-31; 91830; ALMSTETTER,HANS 000000000 10245980-1 ALMSTETTER,HANS91830
Can any one throw some light,how does JMS handle incoming data ?
Regards,
Anirban.

Hi All,
I want to configure JMS to Proxy Scenario , the link provided above doesnt show any blog.
Can anyone explains what steps I need to follow to configure JMS to PROXY scenario? More specifically configuration and stpes to be considered in case of JMS configuration . (Proxy I know ).
I do have the XSD , source structrure which will be genrated via MQ .
Thanks,
Pushkar

Creation of package structure for ABAP proxy scenario

Hi All,
I have a doubt on package structure used for ABAP proxy scenario. What is the specific reason to create a four level package structure? Can some one please explain? Thanks in advance.
Regards,
Sudheer.

Hi Sudheer,
Can you pls clarify what do you mean by 'four level package structure' ?
Are you referring to the ABAP structures that get created during creating the proxy by SPROXY transaction ? These structures get automatically created. We simply have to write the code using these structures.
Or do you mean the 'package' which is mandatory to create a transportable ABAP object ? i.e. transport from Development to Staging and then Production.
Regards,

JMS to IDOC scenario...

Hi,
I am doing an JMS to IDOC scenario...
where will i mention saying there is a logical system in R3(Partner profile).The IDoc should reach that Logical system only.I have a doubt on this....Because we are disabling the IDOC EDIDC segemnt in Recever segment.so.
Please guide me.

You fill the mandt field like SNDRPRT, RCVRPRT and others in the mapping and you can take care of rest in the R/3 side.
You could fill up it in mapping and apply the Check box as mark for considering the control record from Payload in communication channel. Just pass the mandatory fields as you have used the details to configure the prtner profile and port.
You could also specify the Adapter specific attributes with the same logical system name in Busines system or service that could fill-up the control records internally.
Refer
http://help.sap.com/saphelp_nw04/helpdata/en/13/95244269625633e10000000a155106/frameset.htm
SAP Network Blog: Manipulating Idoc Control Records from Payload
Manipulating Idoc Control Records from Payload
changing IDOC control record by XSL Mapping

FTP to ABAP Proxy Scenario - getting error CO_TXT_CHANNEL_PASSWORD_ERROR

We have transported PI and EP data from development server to respective production, every thing is running fine except the abap proxy scenarios i.e. PI reads file from ftp location and calls the abap proxy but we are getting following errors:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_CHANNEL_PASSWORD_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to read user password from communication channel of type Error when accessing the secure store (access ID = FD768D4A8772DB50E1000000AC10041E) Error while reading from the secure store: ERROR_UNKNOWN: Cannot find entry in secure store (SECSTORE,023)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Any solution?
Please note that I have searched and applied solutions given on SDN forums but didn't get any success. So I am looking for new suggestions.
Regards,
Jawed Ali

Jawed ,
Please test the HTTP destination of your receiver comm channel.
Which is the RFC connection to your R3 system.
Transaction SM59 and check the logon parameter for the connection you are using.
Regards,

EOIO is not working for file- BPM- Proxy scenario.

Hi All,
I have one File to BPM (Merge pattern ) to Proxy scenario.
I have two file communication channel at the sender side and defined QOS as EOIO for both. In SXMB_MONI it assings same queue for all messages.
BPM is merging that messages. However during that it assings different queue for merged messages.
When it comes to proxy , again different queues are assingned to the messages.
Is there any way I can define QOS in BPM or at the proxy side ( I know it should be at the sender side only , but it's not working..)
Thanks & Regards,
Dijesh Tanna.

HI,
Within the current release the BPM will always only use EO (SAP Note 833740).
May be the SAP note 905049 will help you on this ...
Thanks
Swarup

Issue in Iodc- abap proxy scenario

Hi all
I have a idoc to abap proxy scenario. The issue is ,
when we send the idoc to client A of target system, it works ifne.
But when we send the saem mesage to Client B, we find a error message in sxmb_moni of Target system. the mesage is Application_fault.
Is it because of any error in XI configuration or somethin else.

hi all
thanks for all your responses.
I forgot to mention that based on a particualr field value in the idoc , it will be routed to eihter Client 100 or 200 .
I gave the conditions in Receiver Determination.
Same Server Proxy is used in both the target business sytems.
I have done all the Configuration Steps ,( Created two separate business systems also )
Also I have checked wiht all the system settings to be made in the target system B.
When i trigger the idoc to Client 100, it goes to XI and then reaches Client 100 of System B
without any problem. I get the desired result from proxy code.
When i send the saem idoc to Client 200, it reaches the target system and routed to client 200. But getting this error message in
the Call Inbound PRoxy step. (from sxmb_moni)
<SAP:Category>Application</SAP:Category>
<SAP:Code area="ABAP">APPLICATION_ERROR</SAP:Code>
Since it reaches the target system correctly, i guess there is nothing wrong in the XI configuration side.
But if its Application fault, how come the same data is processed successfully in one client whereas it thorws error in another.

Error in FILE 2 Proxy Scenario

Hi All,
I am doing File to Proxy Scenario i am getting following error
Could any one provide the solution for this.
*<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>*
*- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">INTERFACE_REGISTRATION_ERROR</SAP:Code>
<SAP:P1>ifmmessif</SAP:P1>
<SAP:P2>MI_Emp_Sender</SAP:P2>
<SAP:P3>Namespace</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No implementing class registered for the interface (ABAP interface, request message MI_Emp_Sender, request message, namespace )</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
Thanks in Advance
Mahesh
</SAP:Error>
Edited by: Mahesh Reddy on Jul 10, 2008 12:47 PM

Hi Mahesh,
1) Use SPROXY transaction.
Menu-> Proxy -> Activate All.
2) check in the interface determination if u are using correct
inbound interface.
3) If this if fine....try deleting all proxy objects of the interface
and create new.
Regards,
Praveen K

Data stuck in QRFC in client proxy scenario

In client proxy scenario (proxy to file async). I triggered the report porgram from ECC and I the green flag moni in ECC but the mesage is did nto reach PI as it got stuck in qrfc. It reaches PI upon clearing the message from SMQ2. Please help solve this.

this problem persists when queues are not registered or any abapstack workitem gets into error.
select the workitem in smq2. execute it manually. after completing the execution, goto sxmb_adm tcode, there select manage queues. then register queues.

File to Proxy Scenario : Error in communication channel monitoring

Hi,
I have developed File to Proxy Scenario on PI 7.1 system and it is not working. I see the below error in communication channel monitoring.
u201CError: com.sap.engine.interfaces.messaging.api.exception.ConfigException: Some of the IS access information is not available. SLDAccess property may be set to true, but SLD is not available.u201D
File will be picked from the FTP server.
I have created File system in SLD of type "Third Party", Can this be the issue?
Please guide me on this.
Thanks,
Chandravadan

Hi!
Check if the tcode SLDCHECK is ok!
Check note #764176.
Also, refer to link below and execute each steps from the links there MANUALLY.
Wizard-Based Configuration:
http://help.sap.com/saphelp_nwpi71/helpdata/EN/45/2e4c1b16bb4aa8e10000000a11466f/frameset.htm
Regards,
Caio Cagnani

File to ABAP Proxy Scenario

Hi All,
I am doing File-to-ABAP Proxy Scenario, in the sender side side it is picking the file, but in sxmb_moni it is giving the error:
*<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>*
*- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="MESSAGE">DUPLICATE_DETECTED</SAP:Code>
<SAP:P1>4CFF4691EEE211DC85E30019D1522982</SAP:P1>
<SAP:P2>CENTRAL</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Message ID 4CFF4691EEE211DC85E30019D1522982 already exists in called system (pipeline CENTRAL)</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Can u plz tell me why this error is occurring and how we can resolve this error.
Thanks & Regards,
Vikas

Hi Vikas
make a dummy change and activate your object then make a full refresh
you can make it through in 3 ways
1) tcode SXI_CACHE
2) go to ID -> environment and make a full cache refresh
3) http://<host>:5<sys#>00/CPACache/refresh?mode=full Full CPA cache refresh
when you do the developement then these are stored in ABAP data dictionary table which can be refreshed by delta cache
while full cache will delete this temporary object and make this cahe into runtime
hope this will help you
thanks
sandeep
if helpful reward points

SOAP - Proxy Scenario

In my SOAP to Proxy scenario I have a proxy that will return "true" or "false" depending on the logic in my method. When I execute the proxy it returns the false value for cases that are false in SAP. The scenario does not return the "true" value when the logic is true in SAP. If I go into SAP and run the method, both the true and the false logic paths work and the method returns the correct value. If I hard code the variable in the method to "test" and execute the XI scenario it will return the word "test" for both cases, true and false. I have the same scenario in my XIQ system and it works fine.
So, what I have done...
I have flushed the cache, that did not work.
I have rebooted my XI system that has the problem.
I have compared my XI broken system with the one that is working and there are no differences.
Does anyone know how I can see what is truely being sent back to the SOAP side? Is there a way to debug the ABAP code from the XI / SOAP side?
Any help would be greatly appreciated.
Thanks
Skip Ford

Hi Ford
When you try with SAP its working right. Did you see that response in XI. If not then no need to touch XI.
Take the payload and try to debug the proxy. You will come to know if it really returns the true value or there is a data issue itself and no problem with XI and SAP.
Check in XI mapping as well. if the value from source is moving to target or not. If you make any changes or found problem do regenerate and activate proxy.
Thanks
Gaurav

SOAP to Proxy scenario communication error

Hi Friends,
 Now i am developing SOAP to Proxy scenario, i am testing WSDL file using SOAP UI software and i am getting an error in SOAP UI tool.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
<title>Error Report</title>
<style>
td {font-family : Arial, Tahoma, Helvetica, sans-serif; font-size : 14px;}
A:link {color : #0059AA;}
A:visited {color : #999999;}
A:active {color : #999999;}
</style>
</head>
<body marginwidth="0" marginheight="0" leftmargin="0" topmargin="0" rightmargin="0">
<table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75">
<tr bgcolor="#FFFFFF">
<td align="left" colspan="2" height="48"> 403 Forbidden</td>
</tr>
<tr bgcolor="#3F73A3">
<td height="23" width="84"><img width=1 height=1 border=0 alt=""></td>
<td height="23"><img width=1 height=1 border=0 alt=""></td>
<td align="right" height="23">SAP NetWeaver Application Server </td>
</tr>
<tr bgcolor="#9DCDFD">
<td height="4" colspan="3"><img width=1 height=1 border=0 alt=""></td>
</tr>
</table>
 
 Error: You are not authorized to view the requested resource.
 <a href="https://wiki.sdn.sap.com/wiki/x/wIN3Cw">SAP Technology Troubleshooting Guide</a>
<table>
<tr>
<td valign="top"> Details:</td>
<td valign="top"><PRE>No details available.</PRE></td>
</tr>
</table>
</body>
</html>
I have tried with the same WSDL earlier it was working fine, now its not working and throwing the above error.
Kindly suggest me to overcome from this issue.
Regards,
Senthil.

Hi Senthil,
Try with the authentication preemtive. Also, check your URL because that error seems that you are accessing to wrong PI section or your user has not the enough credentials, try with PIAPPLUSER or with the same roles that this user.
Regards.

Doubt in JMS to proxy scenario

Similar Messages

Maybe you are looking for